I have TOT files, I have BoardDiag (different versions), but when I follow the countless instructions online I always get "Device was not found in dload trying flash programmer.".
Where do I go from here?
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...???
Check ure ports in d3vice manager
bravo2526 said:
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...������
Click to expand...
Click to collapse
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Quza said:
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Click to expand...
Click to collapse
Bad news if emmc fails ..i supose its a hardware damage to your emmc chip ...
What was you trying when it happend ..?
Power outage during rom installation ??
During KDC flash it stopped working. After 15 minutes at 0% I restarted the phone.
Related
Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
lg g flex 2 relink hs-usb qdloader 9008
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
you got different drivers installed..one makes it connect with relink and other with qualcomm..
i have a bricked d851..
but i havent found a working boarddiag or any other solution..phones still bricked
phone only connects in qualcomm 9008 if i short out motherboard pins..
phone connects in relink 9008 even without shorting(if i install relink drivers)
khalidou said:
Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
Click to expand...
Click to collapse
You go to this page will help you (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359) good luck
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
asaxda said:
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
Click to expand...
Click to collapse
You go to this page will help you (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359) good luck
asaxda said:
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
Click to expand...
Click to collapse
did you find anyway to solve that RELINK problem?
leveridge said:
did you find anyway to solve that RELINK problem?
Click to expand...
Click to collapse
did you find any solution
I have the same prob with Mega GT-I9200 . No sign of life besides that chime coming up when attached to PC and recognizes as Relink 9008. I have to touch the buttons on the phone to wake it up though. Completely messed up. Died while I was reading mails. thats it! I really want to fix that phone! I loved it no matter how ugly it was.
Troubel
khalidou said:
Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
Click to expand...
Click to collapse
already found your problem?
On the button does not respond in rekaveri vhodit.Pri not connected to the notebook , in the Device Manager recognized as Qualcomm HS-USB QDLoader 9008
Device:NOKIA XL(RM-1030)
sw_4081 said:
On the button does not respond in rekaveri vhodit.Pri not connected to the notebook , in the Device Manager recognized as Qualcomm HS-USB QDLoader 9008
Device:NOKIA XL(RM-1030)
Click to expand...
Click to collapse
Couldn't understand your question
It is impossible to restore the phone.
P.S:English is not know , we have to translate the suggestions through Google translator
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
aeroexpert said:
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
Click to expand...
Click to collapse
Search in this forum about "Qualcomm 9008".
But you need to disassembly a little parts of your phone and... you need a little piece of wired.
Good Luck!:good:
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
azzurra01 said:
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
Click to expand...
Click to collapse
Debrick image should bring it partially to life, how did you prepare for the sd card? Which debrick image did you use?
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
cescer4 said:
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
Click to expand...
Click to collapse
Please Help Me