T-Mobile Galaxy Note 3 sm-n900T, ROOTED, custom rom Darth Stalker. Tried to encrypt device causing Brick. Hard Factory reset the device now the encryption wants to load on rebooting. Put in the pin and the broken android appears and the device goes black and is bricked again. Repeat process and same results. Where do I seek information on how to remove the encryption or keep it from allowing the device to boot properly?
Many Thanks
Have you tried flashing a stock ROM from sammobile.com via Odin?
Related
I am a minor like many others to this whole android ROMS, ROOT, and what not.
I recently rooted my Galaxy Note 2 i317M (Rogers-Canada) and tried to install the custom ROM to run the Note 3 features on it.
I followed everything and something went wrong. Not sure. I restarted my device and it restarted the Samsung boot screen a few times then went to the "welcome" screen when turning on your device for the first time and using it. But while in the screen, There were many pop ups saying this or that has stopped working. They kept popping up.
So I went the one of the recovery modes (Vol UP, Home, Power) and reset everything. Cache, factory reset, and dalvik cache. Rebooted my device and it just got stuck at the Galaxy Note II screen. So i used ODIN to try and use a stock ROM. (VOL Down, HOME, POWER works) So i go to ODIN mode and do all that ODIN stuff. It all works and it still is stuck at the Galaxy Note II screen. Nothing else happened. Not sure if my device is bricked, or what not. As i said, i am a minor at this.
Ive looked all around the web, trying many different things to get my device working again.
Can anyone help me get my device up and running again?
My device is a Galaxy Note II i317M
ODIN MODE:
Custom Binary Download: Yes (5counts)
Current Binary: Custom
System Status: Custom
KNOX Warranty Void: 1
RP Swrex: A2
first of all did u checked that the rom was conpatible with your version i317M?
anyway it seems that you dont care or know anything about knox. you should try wiping in recovery all data just in case (it works sometimes for me) or re-check that you were flashing the correct stock rom
hope i helped somehow
Sent from my GT-N7100 using Tapatalk
aka_sirok said:
first of all did u checked that the rom was conpatible with your version i317M?
anyway it seems that you dont care or know anything about knox. you should try wiping in recovery all data just in case (it works sometimes for me) or re-check that you were flashing the correct stock rom
hope i helped somehow
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Did check if it was compatible and yes. Found out that my computer was messing with odin but i got it working. Thanks
Hi everyone. I am having an issue with my Galaxy Note 2 AT&T variant. I tried to flash a rom, but was unsuccessful. I normally don't have an issue like this, but I feel that the phone is soft bricked. Download mode is only accessible and I can not enter recover. If I leave the phone to try to boot up it only gets to the Samsung splash screen. I have tried looking for .pit files and flashing stock recoveries via Odin. I am unsure of what I can do from here. I have also tried to use Android toolkit, but it notifies me that USB debugging is not enabled and I cannot find a way to enable it through Odin or toolkit.
jasonbourne24 said:
Hi everyone. I am having an issue with my Galaxy Note 2 AT&T variant. I tried to flash a rom, but was unsuccessful. I normally don't have an issue like this, but I feel that the phone is soft bricked. Download mode is only accessible and I can not enter recover. If I leave the phone to try to boot up it only gets to the Samsung splash screen. I have tried looking for .pit files and flashing stock recoveries via Odin. I am unsure of what I can do from here. I have also tried to use Android toolkit, but it notifies me that USB debugging is not enabled and I cannot find a way to enable it through Odin or toolkit.
Click to expand...
Click to collapse
What bootloader were/are you on ? A 4.3 or earlier?
If its 4.3 you may just need to flash this... In step #2
http://forum.xda-developers.com/showthread.php?t=2502464
And what did you try and flash?
Hello all,
I've got a Tab 3 7.0 T210R stuck on the Samsung logo with pulsing blue background. I've read through several Samsung boot loop help threads as well as the general Loop noob helper but haven't found a fix yet.
For my stuck T210R, What I've done & can do:
Was rooted with a "patched" stock UK ROM from last March [sorry, don't recall which]
Was running fine until after I tried to install from Play the TWRP Manager, I obviously did something bad! like select wrong device maybe
I can get into Philz, TWRP, & use Odin
I don't have a recovery back up [i really don't care about restoring back to anything - just want it to work, clean slate, ya know]
Tried a couple of latest ROM's through Philz and a stock ROM XAC-T210RUEAMK1-20131122134958.zip though ODIN. They seemed to be successful but I still can't get past Samsung logo
I've tried these ROMS that seem to load but ixna on successful boot afterwards:
ODIN: KIES_HOME_T210RUEAMK1_T210RXACAMK1_1304745_REV00_user_low_ship.tar.md5
Philz: Stock.rooted.deodexed.T210R.zip
Philz: TAB3-T210-HASSAN-ROM-V1.0-kitkat-4.4.2-Aroma-Mods-all Languages.zip
Philz: cm-10.1-20131209(1)-UNOFFICIAL-lt02wifiue.mine.zip
What's killing me is that loading new or stock ROM's SEEM to work - no errors or anything obviously indicative that I'll still be boot looping as soon as I restart. I'm quite desperate and thinking I'm truly bricked.
I haven't yet tried using ADB but if I can use ODIN and TWRP or Philz, will ADB do anything better than what I've already done? I haven't tried anything with the kernel as I can't really understand what to do there. I read and read and read the kernel threads but with my experience its really not as straight forward as rooting or flashing a ROM or software, and I could conceivably screw up worse! I'm mildly experienced at following guides to have rooted and ROM loaded a 1st gen Kindle Fire, Samsung SII skyrocket, S4, Tab 2 7.0, Tab 3 7.0.
No replies or interest? Please help
I'm I in the wrong forum? Did I offend someone? Could really use some input, please.
Any one seen this before? If you've any experience LOSING this battle, please speak up and I'll know to just resign to now owning a pretty white Samsung brick.
Boot to customed recovery under wipe choose format this will zero all partitions then redo
thanks!
andynroid said:
Boot to customed recovery under wipe choose format this will zero all partitions then redo
Click to expand...
Click to collapse
if i could find the "thanks" button I'd use it.
I'm traveling now but definitely try your solution. By "redo" I presume you mean load a ROM. When I wipe I also presume I'll still have custom recovery? I should still be able to ODIN, too, if needed?
thanks again
Yes exactly recovery will not go away once you have formatted the partitions you can now flash a new customed ROM or reflash original FW using Odin..Cheers
Hey buddy wanted to know if you ever found a solution for your issue? I am in the same bind you were in. Can you help guide me. I tried installing the same files you did and to no avail. I bought a Tab 3 T210R from eBay that was stuck in boot loop, I am assuming that it isn't rooted as when I would I went into download mode, it said the firmware was official.
Hello,
I have a stock Galaxy Note 3 Neo, I bought it 6 months ago so I have more than a year of warranty. All of a sudden the device didn't boot up, but it got stuck at the boot logo. I tried to erase the cache from recovery but it kept getting stuck at samsung logo. Usb debugging is off, so the computer doesn't see the device, even when I try with adb. I have many files that I need for work and don't want to loose, so I don't want to do a factory reset. I know that I could fix the problem by installing a custom recovery, but I don't want to risk loosing warranty. Do you think there is a solution to recover my data? Maybe a way to enable usb debug from the computer or somenthing? I know that it's a desperate case and that I have to do a factory reset, but I believe in you and your experience
Thank you in advance
Itgnis said:
Hello,
I have a stock Galaxy Note 3 Neo, I bought it 6 months ago so I have more than a year of warranty. All of a sudden the device didn't boot up, but it got stuck at the boot logo. I tried to erase the cache from recovery but it kept getting stuck at samsung logo. Usb debugging is off, so the computer doesn't see the device, even when I try with adb. I have many files that I need for work and don't want to loose, so I don't want to do a factory reset. I know that I could fix the problem by installing a custom recovery, but I don't want to risk loosing warranty. Do you think there is a solution to recover my data? Maybe a way to enable usb debug from the computer or somenthing? I know that it's a desperate case and that I have to do a factory reset, but I believe in you and your experience
Thank you in advance
Click to expand...
Click to collapse
have you tried to flash stock rom via odin? if i remember right internal sd should remain intact
Hi
my galaxy note 2 is stuck on the flashing SAMSUNG logo after recovering with TWRP, at the end of the recovery when everything is installed (data , files etc the phone gives me error message that "it seems root access lost and requests that I fix the issue. When I press enter on TWRP it reboots and gets to the Samsung logo and does not proceed. Initially I tried to flash a new ROM on the device and was no successful it was then I decided to recover to get to the previous system.
Do I have to flash the SuperUser again using Odin or is there another problem or missed something? I'm stuck and don't know how to get out of this predicament.
Your assistance in this regard will be much appreciated.
Thanks
Martin
Have you tried restoring with TWRP and, when prompted to root again, choosing no?
If you can't get out of the bootloop, you may be better off flashing back to stock with Odin and starting over.