After looking everywhere I finally found a stock recovery for the ZenFone 5 LTE A500KL. Attached is the Stock Recovery and TWRP Recovery. Feel free to download as needed. I've uploaded them to my 4Shared Account. I'll keep the files there until 4Shared is shut down..
http://www.4shared.com/file/4DLKDZCDce/ZenFone5LTEStock.html
http://www.4shared.com/file/N-ds8kivce/ZenFone5LTETWRP.html
dont know how to thank u mate
solved my problem invaild boot image by flashing boot and ur stock recovery and became able to revive my set
Need Help
Shady_Tawfik said:
dont know how to thank u mate
solved my problem invaild boot image by flashing boot and ur stock recovery and became able to revive my set
Click to expand...
Click to collapse
Would you mind to tell me how you did that??
Regards.
---------- Post added at 06:01 PM ---------- Previous post was at 05:56 PM ----------
@TabascoTX, Is there any stock boot image for A500KL too??
Could you help me provide the stock boot??
urgent help needed
i got my zenfone 5 lte bricked due to firmware update, couldn't fix in any way, i can go to CSC screen only but not the SD download since it gives me invalid boot image and can't go through.
just downloaded the above given stock and flashed it, it worked, but i still have the same invalid boot image error, i tried most of boot images but still the same.
any help please ?
arimbi26 said:
Would you mind to tell me how you did that??
Regards.
---------- Post added at 06:01 PM ---------- Previous post was at 05:56 PM ----------
@TabascoTX, Is there any stock boot image for A500KL too??
Could you help me provide the stock boot??
Click to expand...
Click to collapse
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'
TabascoTX said:
After looking everywhere I finally found a stock recovery for the ZenFone 5 LTE A500KL. l[/url]
Click to expand...
Click to collapse
Hello.
What flash tool you use to flash the recovery from PC to A500KL?
Trimis de pe al meu Nexus 7 folosind Tapatalk
what version this twrp
I want lollipop for intex cloud n ips
please share the link
Thanks this worked for my A500KL!
Thank you! I had my zenfone 5 A500KL bricked for almost half a year.
This is what i did
in windows 10 --->
cmd
c:/adb
adb devices
fastboot flash recovery recoveryname(in my case it was ZenFone5LTEStock.img "From this thread" )
Then I got a message in cmd. It said Waiting for phone.
So I pressed down power + volume up. The phone was detected by my PC and the command finally ran.
Next I pressed down power + volume up again and the recovery mode menu finally showed up again!
From there just wiped cache, wiped system, install rom from sd.
Thanks everyone!!!
GeloXD said:
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'
Click to expand...
Click to collapse
I would kiss you right now if i could (and im no gay.)
I was missing this and worked my *** off the last 2 weeks trying to fix the recovery.. I found this and it worked like a charm in 5 minutes bang. Phone on and working.
God bless you my friend!
anyone have stock recovery A500KL WW.12.4.5.58 ? My Recovery was bricked at Invalid Boot image
benaleobayu said:
anyone have stock recovery A500KL WW.12.4.5.58 ? My Recovery was bricked at Invalid Boot image
Click to expand...
Click to collapse
This should work for you. I'm running stock with the same Firmware version. Sorry it's taken me so long to jump back into this tread. Was using a Moto for a while. I like this phone so much more, but with all the stock Asus crap you can barely have any apps. Going to re-root and get rid of some of the bloatware.
dont know how to use cmd
GeloXD said:
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'
Click to expand...
Click to collapse
please help me. i dont know how to use it step by step
1. download adb
Code:
https://androiddatahost.com/wp-content/uploads/minimal_adb_fastboot_v1.4.2.zip
2. unpack it any place, i suggest you to move it to c/adb is quick and the best way.
3. in keyboard press windows key + r, type cmd, than press enter
4. in black cmd window you must type 'cd c:\adb'
#tips# if other disk like D first 'D:' than cd D:\adb or cd adb (or just paste your path to folder)
5. type adb devices to see : 1) correct adb work ? 2) drivers for phone work correct if not u need drivers
5b. In phone go to developer mode and select 'debug usg'
#tip# developer mode turn on if 7 times touch build version in information section.
5c. If connected click in phone 'yes' and remember connect debuggin with pc.
6. if after type adb devices you have somethink like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. if good like this type 'fastboot flash recovery recoveryname.img
#question# recovery file where ? - recovery.img paste to main adb folder
8. just wait for pass and dats it :] u have custom recovery
Drivers link
Code:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500CL/ASUS_Android_USB_drivers_for_Windows_20150212.zip
Check work, or search here
Code:
https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/
Anyone here who can help to unbrick my ASUS Zenfone 5 LTE ( A500KL ). Its stuck in invalid boot image. If i press power + Volume up it goes to the CSC mode. Fastboot commands working there but only limited. If anyone can help I can give access by remote session using teamviewer. Please contact me ASAP. Appreciate your help.
Whatsapp me - 0094776010191
Hola ¿alguien me podria ayudar? mi telefono no pasa del csc mode y queda en error: invalid boot image, que puedo hacer ?
Related
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
pimpsuprazx said:
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
Click to expand...
Click to collapse
Bootloader unlocked?
Can you post a screenshot (PIC) ?
That what happened after flashing the recovery.img and booting into recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
johnyboo said:
That what happened after flashing the recovery.img and booting into recovery:
Click to expand...
Click to collapse
Same problem here.. Really sad.. Was the recovery image working???
jolishj said:
Same problem here.. Really sad.. Was the recovery image working???
Click to expand...
Click to collapse
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
unforseenenemy said:
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
Click to expand...
Click to collapse
the same issue here
like the recovery is not compatible
Try using the recovery found here: http://forum.xda-developers.com/desire-eye/development/recovery-twrp-2-8-4-0-htc-desire-eye-t3008442
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
karo222 said:
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
Click to expand...
Click to collapse
System write protection.
There is a mod to disable that here: http://forum.xda-developers.com/des...e-disable-write-protection-v1-0-tool-t2966850
Or use a custom ROM, those have it disabled already.
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
I have exactly the same issue
hondalude89 said:
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
Click to expand...
Click to collapse
Only you have to Download BETA-SuperSU-v2.71-20160331103524.zip and flash it. Issue Solved
I did all the steps and everythign went fine, but then I downloaded a RootChecker app and it says I dont have root access. How can I make sure everything worked? NVM I GOT IT FIXED THANX ALOT FOR THIS POST!!!
Shameera_N said:
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
Click to expand...
Click to collapse
It is not working on my HTC DESIRE EYE
Error: The code execution cannot proceed because RAPI.DLL was not found.
Troubleshooting steps:
1. Make sure the downloaded file is unzipped
2. USB Debugging enabled
3. On my phone i selected the option, USE USB FOR: "usb file transfer"
4. On my phone I also tried selecting the option, USE USB FOR: "CD Installer"
5. Restart Phone, Mobile and the downloaded file
I have a serious problem: my daughter start an update on the rooted tablet (FE170CG). Ofcourse, the tablet stuck. Well, I didn't panic. I've downloaded firmware from ASUS website, and start to flash it with fastboot. But nothing worked. Tried several firmwares, also from producer site, still nothing. After lots of desperate tryies I managed to flash something, but instead of k012 I discovered it waS a k017 image. After that I couldn't use nothing. The Droidboot starts, or in normal boot it loads the ASUS logo ant then stucks there. Can I test the consistency of partitions somehow, or the consistency of the data inside those partitions? Is it possible to be something erased in one of those partitions? Can anybody point me to how to get a diagnose to be able to guess what's crushed?
I can only use the fastboot. Nothing else worked. I couldn't use ADB, for instance, in windows. Also, in Linux I cannot connect the tablet. It shows in lsusb list, but thats all. Don't shows in blkid devices (mounted or not).. How can I solve this very tricky situation?
Same here
Same here. My ASUS FE170CG bricked while updating latest firmware (WW_V11.2.3.33 For WW SKU) software.
Need some help
If you can use fastboot, flash boot.img fastboot.img and splashscreen.img from firmware zip file, then copy firmware zip file to root of sdcard and name it k012_sdupdate.zip, then in droidboot mode run recovery.
hi
hi, my fonepad stucks on usb with bar (i think battery) under
i cant access my fastboot, droidboot. my fonepad cannot detect by my PC. do you know how i can flash droidboot/fastboot to my device? thank you
cliquester said:
hi, my fonepad stucks on usb with bar (i think battery) under
i cant access my fastboot, droidboot. my fonepad cannot detect by my PC. do you know how i can flash droidboot/fastboot to my device? thank you
Click to expand...
Click to collapse
Press volume up and power for 5 secs....if droidboot still starts nothing is lost
Gyrxiur said:
If you can use fastboot, flash boot.img fastboot.img and splashscreen.img from firmware zip file, then copy firmware zip file to root of sdcard and name it k012_sdupdate.zip, then in droidboot mode run recovery.
Click to expand...
Click to collapse
That didnt work for me. But after a bit of testing i managed to fix my lil' sisters fe170cg after it got bricked when she tried to ota update to lollipop while rooted. heres the method:
NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.[/QUOTE]
where is the recovery img
Same here cannot access droidboot/fastboot and recovery just stucked on intel inside logo and sometimes on asus logo,
-tried removing the battery and inserting it again still no luck..
-tried to flash it on xfstk but the problem is no cloverviewplus detected it became 1 and became 0 again
tried looking on device manager. cloverview appears and disappears
already installed the necessary drivers like intel and usb drivers still no luck detecting the device
-tried the vol up + power button still the same cannot enter droidboot/fastboot or recovery
-adb devices detected 0 devices while plugged on usb
-tried it on multiple windows platform windows 7 and windows 10
pls help me i have no any other solutions
n30x3l said:
Same here cannot access droidboot/fastboot and recovery just stucked on intel inside logo and sometimes on asus logo,
-tried removing the battery and inserting it again still no luck..
-tried to flash it on xfstk but the problem is no cloverviewplus detected it became 1 and became 0 again
tried looking on device manager. cloverview appears and disappears
already installed the necessary drivers like intel and usb drivers still no luck detecting the device
-tried the vol up + power button still the same cannot enter droidboot/fastboot or recovery
-adb devices detected 0 devices while plugged on usb
-tried it on multiple windows platform windows 7 and windows 10
pls help me i have no any other solutions
Click to expand...
Click to collapse
Ihave manage to fix this. When using xfstk trik is start begin download fisttime when plug your cable. You have to fast. When it detect 1 before it turn to 0
My fonepad 7 k012 is fixed now. Will write tutorial when ihave time.
iki_sure said:
Ihave manage to fix this. When using xfstk trik is start begin download fisttime when plug your cable. You have to fast. When it detect 1 before it turn to 0
My fonepad 7 k012 is fixed now. Will write tutorial when ihave time.
Click to expand...
Click to collapse
yes please make a tutorial I will wait for it... you will be my savior thanks!
n30x3l said:
yes please make a tutorial I will wait for it... you will be my savior thanks!
Click to expand...
Click to collapse
Did you try xfstk with trick i toldyou before?
iki_sure said:
Did you try xfstk with trick i toldyou before?
Click to expand...
Click to collapse
Nothing happens,, I dont know what files to put on "OS Dnx and OS image" where can i find those two files?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here is the result,,, do you have the same result?
If you haven't solve the problem yet, try the following link.
http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
Hopefully it helps.
n30x3l said:
Nothing happens,, I dont know what files to put on "OS Dnx and OS image" where can i find those two files?
Click to expand...
Click to collapse
Download firmware from asus web. Choose the older ones.
Extract zip. Find extract ifwi zip. Thare you got you file needed.
---------- Post added at 02:33 PM ---------- Previous post was at 02:15 PM ----------
n30x3l said:
View attachment 3916439
here is the result,,, do you have the same result?
Click to expand...
Click to collapse
Great. Put os dnx and image file. After complete device will reboot to droid boot.
Please continue update progress with screen shots pic.
iki_sure said:
Download firmware from asus web. Choose the older ones.
Extract zip. Find extract ifwi zip. Thare you got you file needed.
---------- Post added at 02:33 PM ---------- Previous post was at 02:15 PM ----------
Great. Put os dnx and image file. After complete device will reboot to droid boot.
Please continue update progress with screen shots pic.
Click to expand...
Click to collapse
i have tried the latest version with no luck
what version will you recommend?
Your answer was already there in post #14
OS DnX = N/A
OS Image = droidboot.img.bin (renamed droidboot.img)
n30x3l said:
i have tried the latest version with no luck
what version will you recommend?
Click to expand...
Click to collapse
Oldest firmware with Jellybean. Os image using fastboot.Img rename it to fastboot.img.bin
iki_sure said:
Ihave manage to fix this. When using xfstk trik is start begin download fisttime when plug your cable. You have to fast. When it detect 1 before it turn to 0
My fonepad 7 k012 is fixed now. Will write tutorial when ihave time.
Click to expand...
Click to collapse
have you write the tutorial???i have the same problem too...can you teach me xFSTK trick that you told???
Hi there I bought Chinese version of N1 and flashed with Taiwan system.img which was great everything was awesome~!
but somehow I was curious what would happen if I install layer manager onto N1 that triggered tragedy of hard brick incident of owning N1 within 3 days. After I install some layer it asked me to reboot to apply the layers so I did and bootloop started.
I could see my tablet as MTP and ADB at that time so I could use ADB command to get bootloader but I couldn't get into recovery so I dug more around on xda-forum and installed it. Some said factory reset will fix all my issues especially bootloop so I didn't worry about what I was doing pressed couple time to navigate Yes factory reset/wipe all in stock recovery mode.
After it wiped it all I didn't know that the bootloop is still exist but I can't find my tablet in computer as ADB anymore but moorefield device with unknown driver exclamation mark so I googled more some suggest to use Intel Phone Flash tool.
So I could install right driver for moorefield also I could navigate the N1 as some device so I can flash something into tablet but I need components to fresh install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes I'm stuck on here now please help or command me what to do!!
updated 09/05/2015 - Still waiting for solution now I will donate who will find out unbrick my N1 through paypal donation. Please help me out!
updated 09/23/2015 - Couldn't find help from anyone so I ordered one more N1 from now, is there any possible to use the data from new tablet to flash or install onto bricked tablet? I heard linux or ubuntu can connect the bricked N1 even it only shows the tablet as MTP on Windows which I can't even see the device's file or folder. Also Intel phone flash tool doesn't support N1 yet and there are nothing possible without ADB connection on Windows which is probably many boot-loop users have the issue.
i'm here with you, same problem T_T, havent got a solution
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
i found dnx and ifwi firmware in Ifwi.zip , but it can not flash
kaikool said:
i'm here with you, same problem T_T, havent got a solution
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
i found dnx and ifwi firmware in Ifwi.zip , but it can not flash
Click to expand...
Click to collapse
Can you give links to these files?
you can download and extract your firmware, here: http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 , you'll see ifwi.zip. Extract it, then you'll find 4 files:
1.bom-token_ann_a0-mofd_v1-N1.bin, => i dont know
2.dnx_fwr_ann_a0-mofd_v1-N1.bin, => dnx firmware (guess)
3.ifwi_ann_a0-mofd_v1-N1.bin, => iwifi firmware (guess)
4.version => i dont know
daion said:
Hi there I bought Chinese version of N1 and flashed with Taiwan system.img which was great everything was awesome~!
but somehow I was curious what would happen if I install layer manager onto N1 that triggered tragedy of hard brick incident of owning N1 within 3 days. After I install some layer it asked me to reboot to apply the layers so I did and bootloop started.
I could see my tablet as MTP and ADB at that time so I could use ADB command to get bootloader but I couldn't get into recovery so I dug more around on xda-forum and installed it. Some said factory reset will fix all my issues especially bootloop so I didn't worry about what I was doing pressed couple time to navigate Yes factory reset/wipe all in stock recovery mode.
After it wiped it all I didn't know that the bootloop is still exist but I can't find my tablet in computer as ADB anymore but moorefield device with unknown driver exclamation mark so I googled more some suggest to use Intel Phone Flash tool.
So I could install right driver for moorefield also I could navigate the N1 as some device so I can flash something into tablet but I need components to fresh install.
Yes I'm stuck on here now please help or command me what to do!!
updated 09/05/2015 - Still waiting for solution now I will donate who will find out unbrick my N1 through paypal donation. Please help me out!
Click to expand...
Click to collapse
How to flash the Taiwan system. img . I need your help .
Velunce said:
How to flash the Taiwan system. img . I need your help .
Click to expand...
Click to collapse
soondin said:
Thank you for your upload.
I was successfully change to taiwan version.
I use ADB Shell and restore use your file.
My one's build number be A5FM51C.
If any chinese version user already rooted N1.
May be can change from china to taiwan.
1. Move system.img to N1's internal storage
2. ADB shell (enabled debug mode)
3. SU (need accept at your N1)
4. dd if=/sdcard/system.img of=/dev/block/pci/pci0000:00/0000:00:01.0/by-name/system
(/pci/pci0000:00/0000:00:01.0 is my one's directory name but I don't know other N1 is same or not)
5. wait some minute. until done shell command.
6. ignore some error message.
7. exit su and adb shell
8. reboot to recovery (adb reboot recovery)
9. wipe cache.
10. reboot N1 and it will update.
I don't try wipe data partion at recovery.
Cause My one is A5CN51C.
I will make some more screen shot like can find google Chrome at playstore.
Click to expand...
Click to collapse
I followed the way it's in Nokia N1 general forum.
daion said:
I followed the way it's in Nokia N1 general forum.
Click to expand...
Click to collapse
I would not recommend any further, i have flashed alot with that program (custom flashing) as i had the layers theme brick too, and after like 30 flashings of recovery, system, iwifi etc (flashed but without success) my bootloader now shows a locked state where i cannot flash anything anymore (i was on 5.0.2 but i wiped my system by accident instead of factory reset to recover from layer theme), so don't flash to much or to reckless as this will lock down your nokia completly like mine. (I now regret buying it though)
Hi guys, i found this awesome TWRP for our RedMi Note 2.
- Easy rooting included
- OTA update support
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Post: http://en.miui.com/thread-152550-1-1.html
Link to download: http://www.mediafire.com/download/6sf0fsm8vx2o948/twrp287.zip
Instruction
Put the zip file into internal memory, then Install from updater, choose twrp287.zip or u can rename it first as update.zip then install from updater
Hope you guys enjoy it, because i surely do.
Huge thanks to the awesome people behind this :good:
What you mean with "Easy rooting"? I used already but I not found anything related to rooting :/
This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk
I agree. It may look nice but it's sluggish, buggy and is a pain in the butt to unlock its lockscreen. Regular TWRP is a billion times better
jerryshaw12 said:
This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I not used the restore feature so I don't know if working or not, but I trust you
jerryshaw12 said:
This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
elaurens said:
I agree. It may look nice but it's sluggish, buggy and is a pain in the butt to unlock its lockscreen. Regular TWRP is a billion times better
Click to expand...
Click to collapse
I used this TWRP about 2 months without any problems, almost on a daily basis.
Countless of backup/restores...
It is necessary only to turn off the screen timeout in settings, like in all versions of TWRP's.
This recovery working normaly with me.
I use this recovery since I've got my phone ( 2 mounths) and it works perfectly ! Backup/Restore works everytime, you can change the unlock method or just disable the time-out... Easy root mean that the recovery see when you have an un-root ROM and when you choose Restart System will ask you to flash SuperSU ( ex: MIUI Stable ROM ).
I use that recovery and backup and restore works fine for me.
Hmm wait, i remember,i had mounted system partition before i restore my backup, mount system partition is buggy if i want to flash / restore something maybe :/
Sent from my Redmi Note 2 using Tapatalk
jerryshaw12 said:
Hmm wait, i remember,i had mounted system partition before i restore my backup, mount system partition is buggy if i want to flash / restore something maybe :/
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
If for other working the restore system I think you have a problem with your device, but now I wanna try, give confirm tomorrow
This is my favorite recovery on my Redmi Note 2.:laugh::laugh::laugh:
I can't extract this recovery through Android Kitchen :/ it says the format using "data"
Sent from my Redmi Note 2 using Tapatalk
Hi,
Followed the instructions but every time I try to install it I get the following error (see picture)
I'm on MIUI Global 7.1.1.0 (LHMMICK) Stable.
What am I doing wrong?
The best way is to flash it using SP Flash ! I've flashed it like this and I never loss my TWRP recovery !
Gyovany96 said:
The best way is to flash it using SP Flash ! I've flashed it like this and I never loss my TWRP recovery !
Click to expand...
Click to collapse
But do I have to unzip the file first to get the scatter file in to SP Flash?
I've used this ( 7.0.8.0 fastboot ). I don't know, maybe they are all the same
Use what you want !
* Mi PC Suite (for the drivers)
* ADB Fastboot Tool
* materialized_twrp287_hermes.img
rename it into recovery.img & move it to ADB Fastboot Directory.
Connect your phone
MSDOS :
Change directory to ADB Fastboot directory
adb reboot fastboot
fastboot flash recovery recovery.img
disconnect & reboot by press power + vol up.
*] front LED holographic keyboard >> another dream in android.
Adam Hui said:
* Mi PC Suite (for the drivers)
* ADB Fastboot Tool
* materialized_twrp287_hermes.img
rename it into recovery.img & move it to ADB Fastboot Directory.
Connect your phone
MSDOS :
Change directory to ADB Fastboot directory
adb reboot fastboot
fastboot flash recovery recovery.img
disconnect & reboot by press power + vol up.
*] front LED holographic keyboard >> another dream in android.
Click to expand...
Click to collapse
Thanks, for the info, but where can I find "materialized_twrp287_hermes.img" there's only a .zip file I can find.
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
Gyovany96 said:
I've used this ( 7.0.8.0 fastboot ). I don't know, maybe they are all the same
Use what you want !
Click to expand...
Click to collapse
Hi, but is only a scatter file. Shouldn't there be more files?
KURT.Beadles said:
Thanks, for the info, but where can I find "materialized_twrp287_hermes.img" there's only a .zip file I can find.
Click to expand...
Click to collapse
Lol....use WinRar, 7Zip or similiar...
PREREQUISITES:
- Nubia Z17 device.
- USB type C cable.
- Computer with Windows and adb-fastboot drivers installed and configured (there are a lot of guides on the Internet).
- Nubia Z17 Pack -> You have the mirrors at the end of the post
STEPS:
1.- Download the pack with all the necessary stuff.
2.- Decompress the folder that is inside the rar.
3.- Open that folder, press SHIFT and at the same time do right click. Click on open a powershell... or open a command prompt...
NOTE: if appears the first option you have to send the command: cmd
4.- Put the phone on fastboot mode (power and vol+ at same time) and connect the phone to the computer.
5.- Send the command fastboot devices and it should give you something like this if the drivers are OK:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.- Send this command to unlock bootloader: fastboot oem nubia_unlock NUBIA_NX563J
Now you have your bootloader unlocked!
7.- Send this command to flash TWRP: fastboot flash recovery TWRP_recovery.img
Now you have the TWRP recovery flashed!
8.- To reboot into recovery you have to choose with volume buttons the option to reboot recovery and press power.
There is a little problem, the recovery is in Chinese and I don't know you, but I don't understand Chinese :silly: So let's change the language.
9.- When it displays the first screen, something like this pic, you have to press the second button and choose your favourite language (I always recommend English)
10.- Now you have to root the phone, go to Advanced > Tools and press Root device.
Now you have your phone's bootloader unlocked, the TWRP recovery flashed and root access!
DOWNLOADS:
- Nubia Z17 Pack (MEGA)
Alternative mirror (DRIVE)
CREDITS:
- @shimp208 for the Minimal ADB and Fastboot portable included in the pack.
- users of Nubia forum that made the TWRP 3.1.1
- One photo from MIUI
Awesome thanks, now I've got a TWRP I can actually understand
dorkozoid said:
Awesome thanks, now I've got a TWRP I can actually understand
Click to expand...
Click to collapse
I am glad to hear that
As we have twrp now..can someone try flashing gapps using it
Gapps is working for me.
I flash Open GApps (ARM64 + 7.1 + full)
ndv92 said:
Gapps is working for me.
I flash Open GApps (ARM64 + 7.1 + full)
Click to expand...
Click to collapse
so ı dıd same and all worked goıod first then later ıts not working . do u have same problem ?
---------- Post added at 07:34 AM ---------- Previous post was at 07:33 AM ----------
thanks for guide . Many should be happy now. but we need one guide how to make gapps works aswell.
arceoxis said:
PREREQUISITES:
- Nubia Z17 device.
- USB type C cable.
- Computer with Windows and adb-fastboot drivers installed and configured (there are a lot of guides on the Internet).
- Nubia Z17 Pack -> You have the mirrors at the end of the post
STEPS:
1.- Download the pack with all the necessary stuff.
2.- Decompress the folder that is inside the rar.
3.- Open that folder, press SHIFT and at the same time do right click. Click on open a powershell... or open a command prompt...
NOTE: if appears the first option you have to send the command: cmd
4.- Put the phone on fastboot mode (power and vol+ at same time) and connect the phone to the computer.
5.- Send the command fastboot devices and it should give you something like this if the drivers are OK:

6.- Send this command to unlock bootloader: fastboot oem nubia_unlock NUBIA_NX563J
Now you have your bootloader unlocked!
7.- Send this command to flash TWRP: fastboot flash recovery TWRP_recovery.img
Now you have the TWRP recovery flashed!
8.- To reboot into recovery you have to choose with volume buttons the option to reboot recovery and press power.
There is a little problem, the recovery is in Chinese and I don't know you, but I don't understand Chinese :silly: So let's change the language.
9.- When it displays the first screen, something like this pic, you have to press the second button and choose your favourite language (I always recommend English)
6.- Send this command to unlock bootloader: fastboot oem nubia_unlock NUBIA_NX563J
Now you have your bootloader unlocked!
7.- Send this command to flash TWRP: fastboot flash recovery TWRP_recovery.img
Now you have the TWRP recovery flashed!
8.- To reboot into recovery you have to choose with volume buttons the option to reboot recovery and press power.
There is a little problem, the recovery is in Chinese and I don't know you, but I don't understand Chinese :silly: So let's change the language.
9.- When it displays the first screen, something like this pic, you have to press the second button and choose your favourite language (I always recommend English)

Now you have your phone's bootloader unlocked and the TWRP recovery flashed!
DOWNLOADS:
- Nubia Z17 Pack (MEGA)
Alternative mirror (DRIVE)
CREDITS:
- @shimp208 for the Minimal ADB and Fastboot portable included in the pack.
- users of Nubia forum that made the TWRP 3.1.1
- One photo from MIUI
Click to expand...
Click to collapse
Thank you, for the guide but i had a problem here. After unlock bootloader and instal the TWRP success, i reboot the phone and try to access the TWRP, but it get back into stock recovery. I ty to reinstall the TWRP but still same. Please help. Thank you.
jeffaguilera said:
Thank you, for the guide but i had a problem here. After unlock bootloader and instal the TWRP success, i reboot the phone and try to access the TWRP, but it get back into stock recovery. I ty to reinstall the TWRP but still same. Please help. Thank you.
Click to expand...
Click to collapse
u shud root the phone . open twrp / advance / tools / root device.
after i unlock bootloader i flash twrp and gapps. But when i restart the phone, the phone stop on the logo nubia and stop. Why?
the developer of the twrp said that you should root the phone first after you flashed something in the recovery mode.
valeriolorenzon said:
after i unlock bootloader i flash twrp and gapps. But when i restart the phone, the phone stop on the logo nubia and stop. Why?
Click to expand...
Click to collapse
did you root the phone ?
---------- Post added at 01:37 PM ---------- Previous post was at 01:35 PM ----------
valeriolorenzon said:
after i unlock bootloader i flash twrp and gapps. But when i restart the phone, the phone stop on the logo nubia and stop. Why?
Click to expand...
Click to collapse
when you open twrp first go advandec / tools /root phone
then ınstall gapps
but sınce 1 week ım tryıng fix .
ı rootted the phone ı ınstalled twrp ı ınstalled gapps . the google apps all of them was workıng fıne . then later on error agaın.
we need wait for a clear working guide.
sewkanteam said:
u shud root the phone . open twrp / advance / tools / root device.
Click to expand...
Click to collapse
thank you, but i think i will wait untill there is a really working way for this because the last time i tried, i stuck on Nubia logo and it makes me crazy... haha.
jeffaguilera said:
thank you, but i think i will wait untill there is a really working way for this because the last time i tried, i stuck on Nubia logo and it makes me crazy... haha.
Click to expand...
Click to collapse
if you wanna learn you have to brick it first bro
sewkanteam said:
if you wanna learn you have to brick it first bro
Click to expand...
Click to collapse
that's true, haha... the bad is i have no back up phone. I already sold my Nubia Z11 after i got the Z17 so i think i will wait for the best way to install the Gapps.
same here
jeffaguilera said:
thank you, but i think i will wait untill there is a really working way for this because the last time i tried, i stuck on Nubia logo and it makes me crazy... haha.
Click to expand...
Click to collapse
how you fixed this,my phone stuck on the logo and cant do anything,help please
---------- Post added at 09:39 PM ---------- Previous post was at 09:39 PM ----------
how you fixed this,my phone stuck on the logo and cant do anything,help please
assan122 said:
how you fixed this,my phone stuck on the logo and cant do anything,help please
---------- Post added at 09:39 PM ---------- Previous post was at 09:39 PM ----------
how you fixed this,my phone stuck on the logo and cant do anything,help please
Click to expand...
Click to collapse
if u still have twrp go advantec /tools/root phone then ıt will open . if you still cant open then you can download offical stock rom v2.44 put in ur memory card then ınstall. here lınk https://forum.xda-developers.com/nubia-z17/how-to/stock-rom-nubia-z17-v239-t3633206
wipe data system cache /dalvik then install what u downloaded.
nubia z17
sewkanteam said:
if u still have twrp go advantec /tools/root phone then ıt will open . if you still cant open then you can download offical stock rom v2.44 put in ur memory card then ınstall. here lınk https://forum.xda-developers.com/nubia-z17/how-to/stock-rom-nubia-z17-v239-t3633206
wipe data system cache /dalvik then install what u downloaded.
Click to expand...
Click to collapse
my phone dosent have SD slot card
assan122 said:
my phone dosent have SD slot card
Click to expand...
Click to collapse
I knıow . ı have same phone lol
ı meany your phone stroage you can still see it even ur in twrp.
downloand and put it in ur phone stroage ( phone memory ) . then ınstal wıth twrp.
but fiirst root the phone then restart phone. see if ıts ok
i cant
sewkanteam said:
I knıow . ı have same phone lol
ı meany your phone stroage you can still see it even ur in twrp.
downloand and put it in ur phone stroage ( phone memory ) . then ınstal wıth twrp.
but fiirst root the phone then restart phone. see if ıts ok
Click to expand...
Click to collapse
my phone totally stucked i cant get insaid and the twrp not istalled
assan122 said:
my phone totally stucked i cant get insaid and the twrp not istalled
Click to expand...
Click to collapse
ok let me help you.
close phone and open wıth press volume down button then you will be in fastboot.
make sure you have usb connected wıth pc. or laptop
open thıs lınk https://share.weiyun.com/8e5707dc3619ee5d3e584c38a714ea31
you will see twrp root file open ıt then you wıll see onekey tool. download tht open the zip and pres twrp recovery bat
after that with volume down choose reboot to recovery mode.
then twrp will be opened..
so change language to englısh then go advantec / tools / root phone
then restart the phone.
By the wya ı have no idea what have done to phone. what steps you did and how you brıck it and ıs your rom pre ınstalled or offical explaın here so maybe some other frıends can help u aswell. ım not so pro member lol .)