Develop Bugs

[RECOVERY] ClockworkMod Recovery *GSM Edition*

ClockworkMod 5.5.0.2 for Galaxy Nexus *GSM Edition*
Download Link
MD5: 445887336a863573997ccbaeedddc984
File Size: 5,427,200 bytes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Gain Root and Unlock Bootloader
1. Download root package: Link
2. Download CWM: Link
3. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
4. Unlock the bootloader if locked (fastboot oem unlock) then reboot into fastboot mode again
5. Temporarily flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.2-maguro.img)
6. Boot into recovery (Press Volume Up twice until you see "Recovery mode" then press the Power button)
7. Using CWM recovery, install su.zip that you downloaded in step 1
8. Reboot into the OS
9. You are now rooted
How to Install ClockworkMod
1. Install Root Explorer from the market and delete /system/recovery-from-boot.p *Mount as R/W first* See this link for help
2. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
3. Flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.2-maguro.img)
4. Reboot into OS (fastboot reboot)
5. You now have CWM recovery permanently installed
How to Access ClockworkMod
1. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
2. Press Volume Up twice
3. Press the Power button when you see "Recovery mode" selected​
**All credit goes to to Koush and anyone else responsible for ClockworkMod**

Awesome. This will make rooting even easier. Just unlock, flash CWM and then install su from there.

Does this recovery work?
I have flashed the same recovery via rom manager and it just comes up with a black screen
Koush has said he will fix it in the next few days
Sent from my Galaxy Nexus using Tapatalk

Protip: Test something before you post it. This does NOT work at the time of writing.
P

spences10 said:
Does this recovery work?
I have flashed the same recovery via rom manager and it just comes up with a black screen
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Same here black screen when booting to recovery

punkrjb said:
Same here black screen when booting to recovery
Click to expand...
Click to collapse
This was already posted a few days ago and it was stated that it didnt work and the link removed.
I have removed the link from the original post until its working and then the first person to post the information (or the developer) will have the right to post it.
Mark.

Working download link and new version is now up.

Can, reportedly, also be gotten through the ROM Manager.

FISKER_Q said:
Can, reportedly, also be gotten through the ROM Manager.
Click to expand...
Click to collapse
Yeah, works flashed it and am now flashing one of FitsSnugly's AOSP builds

spences10 said:
Yeah, works flashed it and am now flashing one of FitsSnugly's AOSP builds
Click to expand...
Click to collapse
fitsnugly got a GN build up? WHERE?

Can you backup your stock Recovery before flashing CWM Recovery?

There's some reports on Koush's twitter that superuser doesn't work on CWM on the Nexus

Niksko said:
There's some reports on Koush's twitter that superuser doesn't work on CWM on the Nexus
Click to expand...
Click to collapse
for me its working well. just made backup and using SU after etc. no issue at all
but i installed cwm from ROM manager instead

How does CWM save/store its ROMS, and where does it load from? With the Xoom, without a working SD, it was not possible to use CWM.
If the onboard storage is all one volume with the OS, is the storage included in the backup, and how is the images written if the storage is needed to hold the ROMS to be flashed?

StuMcBill said:
Can you backup your stock Recovery before flashing CWM Recovery?
Click to expand...
Click to collapse
I'd like to know this too. I found something that would back it up, but you need root first. I'd like to be able to back it up before rooting if possible.

Niksko said:
I'd like to know this too. I found something that would back it up, but you need root first. I'd like to be able to back it up before rooting if possible.
Click to expand...
Click to collapse
Rooting shouldn't affect the Recovery partition so you should be able to safely root then backup your stock recovery before installing ClockworkMod Recovery?
Or if someone backs up theirs you could download it and keep a copy of it?

Anyone can post here recovery.fstab ?

I have just installed Rom Manager and I get a FC but it seems to have installed the CWM OK. It successfully rebooted to CWM and I could navigate around but I didn't try flashing anything yet.
The issue may be more with Rom Manager than the recovery

Installed CWM just fine, however when i try to do a nandroid backup it says "Can't mount backup path" or when i try to browse for a zip to install "Can't mount /sdcard/".
My first guess is that it is because i encrypted my phone, but i believe it works on my Xoom, which is encrypted as well... (I will check this later when i have my Xoom nearby)

FYI, this recovery also is confirmed working on my VZW LTE version.
Backups are approximately 6-700MB and are ext4.tar files for system, data and cache.

Easy Installation of Recovery For Optimus Me p350

Custom Recovery AmonRA-GNM 2.2.1 for Optimus Me P350 installation Guide​
This is an easy installable version of Recovery for Optimus Me.First I want to thanks drapalyuk for creating a Recovery mod for Optimus Me P350.This post is based on the [RECOVERY] Custom Recovery AmonRA-GNM 2.2.1 for Optimus Me P350 post.
How To :
first you must root your device with Gingerbreak
then install Busybox from market (free)
Download the zip file to your computer
Recovery installer.zip
ON PC :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ON Mobile :
open the gscript application which is already installed by the PC automatically to your phone
Note : when press the script in the last part it will ask for super user permission clickallow button

Reserved for you Guys to click thanks Button

it doesn't work.. pls give me a step by step instructions because im new here.. tnx alot..

franshie06 said:
it doesn't work.. pls give me a step by step instructions because im new here.. tnx alot..
Click to expand...
Click to collapse
This thing is Tested by other users and it working Fine.there is something wrong with your process of installing.Try it one more time

my phone won't turn on after flashing... help pls..

franshie06 said:
my phone won't turn on after flashing... help pls..
Click to expand...
Click to collapse
Dude !!!
Dont post this type of posts in this thread
others will think that you flashed the recovery and got bricked your phone
please edit the above thread and tell your actual problem like you flashed using kdz updater and the bricked.I have already PMed.

After clicking on the .bat file, it does put gscript app on my phone, but it can't find the script.sh file on the sd card (there's no gscript folder as well).
Should I try the installer again? Create the folder and copy the file?
Nevermind, it's working now. I just don't know how to keep going from there. How do I install a new ROM?

After I click on the script, it does blue screen and then reboots, but not into recovery mode it just starts up like normal.
Thanks .

h3ckboy said:
After I click on the script, it does blue screen and then reboots, but not into recovery mode it just starts up like normal.
Thanks .
Click to expand...
Click to collapse
I had this problem too (tho i flashed manually) but when i reflashed it worked fine.But before you try reflashing it try to boot the phone into recovery using ADB
Here is how:
Plug your phone in and enable debugging.
Then open ADB and type in su and hit enter after that type reboot recovery and again enter.If you flashed the recovery correctly your phone should boot into recovery. Hope that helps

Hello!
Your tutorial is quite good and very helpful.
Everything worked as you described.
But, after the blue screen, I had an issue: my phone stops at Fastboot mode. Then I get the message "udc_start()" and it stops there, nothing happens. It doesn't start android. Can you tell how to proceed from there?
Thank in advance!
Best,
F

does this work???

fslade said:
Hello!
Your tutorial is quite good and very helpful.
Everything worked as you described.
But, after the blue screen, I had an issue: my phone stops at Fastboot mode. Then I get the message "udc_start()" and it stops there, nothing happens. It doesn't start android. Can you tell how to proceed from there?
Thank in advance!
Best,
F
Click to expand...
Click to collapse
If ripping out the battery didn't help then you need to flash the recovery via fastboot.Since your phone automatically boots into bootloader ( the udc_start () state) you need to download fastboot flasher ( you can find it via google or xda search) and flash recovery from there.Just make sure you are flashing the right recovery.And then from the recovery you can flash a custom rom.
Sent from my LG-P350 using XDA premium

kalluf said:
After clicking on the .bat file, it does put gscript app on my phone, but it can't find the script.sh file on the sd card (there's no gscript folder as well).
Should I try the installer again? Create the folder and copy the file?
Nevermind, it's working now. I just don't know how to keep going from there. How do I install a new ROM?
Click to expand...
Click to collapse
You boot into recovery and navigate to backup (in order to make nandroid backup-you can skipp this step but you won't have a stock android backup in case you dont like the new rom or it doesn't work) than navigate to flash zip from sdcard(obviously you need the rom on the sdcard) and then select the rom and then confirm flash.After that you should see a yellow progress bar after the flash is complete you reboot your device.Oh and just in case you didn't know you navigate using up and down volume buttons you confirm with menu button and you cancel/go back with back button
Sent from my LG-P350 using XDA premium

eliak said:
does this work???
Click to expand...
Click to collapse
People say it does personally i haven't tried it (because i flashed mine manually) but i highly doubt that Vivek would post something that doesn't work.
Sent from my LG-P350 using XDA premium

I did it differently because there is no working link of the recovery.zip
after rooting the phone with gingerbreak, simply download ROM Manager from play store and flash recovery from there.

hi i need original rom 2.2.2 for my phone in zip form so i can put on my sd card and flash dose anybody have this and if so could they upload it for me thanks

Works nicely! However, I had to follow the following procedure:
- Disconnect the USB cable
- Start in fastboot mode
- Type the command in the PC (it should says something like "Waiting for device")
- Connect the USB cable
Without using this procedure, I would get stuck in "Waiting for device". Hope it helps someone.

michaelga67 said:
hi i need original rom 2.2.2 for my phone in zip form so i can put on my sd card and flash dose anybody have this and if so could they upload it for me thanks
Click to expand...
Click to collapse
Check on the Android Development section for it...

forum.xda-developers.com/showthread.php?t=1971158
Sent from my Xperia Neo V using xda app-developers app

I tried using this method , but instead of getting a recovery i ended up with a bricked phone , soI used the clockworkmod app from playstore to install cwm 6 recovery , worked fine without any problems for me

[Q] Erase my OS in Galaxy Nexus by accident

Hi I need some helps here
My galaxy nexus 4.2.2 rooted
CWM installed
Wiped my system via advance setting and now it say that i dont have any OS in my phone
Rooting process was done using toolkit
I tried to flash 4.3 to my GN and this is what i get from my screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i wonder if anyone there could help me ?
thanks

Screenshot not working.
Flash stock ROM using fastboot.
https://developers.google.com/android/nexus/images
Questions regard the toolkit goes to the toolkit thread.
Questions in the Q&A section ONLY.
Beamed from my Maguro.

use adb push
and flash a random rom.

Use adb sideload and sideload another rom.
Sent from my Galaxy Nexus using Tapatalk 4 Beta

sui785 said:
Use adb sideload and sideload another rom.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Download a custom rom from this forum, Cyanogenmod for example. So make sure you have a .zip file. Then make sure ADB is fully working on your computer/laptop/iStone and do the following:
- Start your phone in recovery mode:
1. vol down + vol up + power while the phone is off
2. Select "recovery mode" with the volume buttons and press power to confirm
>phone boots into CWM
- Go to storage/mounts and mount system (mount your system partition)
- Open a CMD window on your computer and navigate to where your Android SDK is (/pathhere/android-sdk/platform-tools/)
- For ease of use put the rom you just downloaded (the .zip file) in that platform-tools folder.
- Now run these commands:
1. "adb remount"
2. "adb push nameofzipfile.zip /system/sdcard/"
- Now unmount system
- Go to flash a zip from your SD-card and you should see the zip file you just 'pushed' (copied)
Flash away and your phone should be at least booting again.
Other than that, this is the wrong forum for questions.

First, learn to post in the correct place. This is the development section, not the help section.

You posted in the wrong place, you dont serve help
g281274 said:
Hi I need some helps here
My galaxy nexus 4.2.2 rooted
CWM installed
Wiped my system via advance setting and now it say that i dont have any OS in my phone
Rooting process was done using toolkit
I tried to flash 4.3 to my GN and this is what i get from my screen shot
i wonder if anyone there could help me ?
thanks
Click to expand...
Click to collapse

B1nny said:
Download a custom rom from this forum, Cyanogenmod for example. So make sure you have a .zip file. Then make sure ADB is fully working on your computer/laptop/iStone and do the following:
- Start your phone in recovery mode:
1. vol down + vol up + power while the phone is off
2. Select "recovery mode" with the volume buttons and press power to confirm
>phone boots into CWM
- Go to storage/mounts and mount system (mount your system partition)
- Open a CMD window on your computer and navigate to where your Android SDK is (/pathhere/android-sdk/platform-tools/)
- For ease of use put the rom you just downloaded (the .zip file) in that platform-tools folder.
- Now run these commands:
1. "adb remount"
2. "adb push nameofzipfile.zip /system/sdcard/"
- Now unmount system
- Go to flash a zip from your SD-card and you should see the zip file you just 'pushed' (copied)
Flash away and your phone should be at least booting again.
Other than that, this is the wrong forum for questions.
Click to expand...
Click to collapse
WTH are you going on about? /system/sdcard/ ??? Mount /system to push a ROM to /sdcard/???

beekay201 said:
WTH are you going on about? /system/sdcard/ ??? Mount /system to push a ROM to /sdcard/???
Click to expand...
Click to collapse
I always had to mount /system in order to get ADB to find my device so that's what I recommended.

B1nny said:
I always had to mount /system in order to get ADB to find my device so that's what I recommended.
Click to expand...
Click to collapse
/sdcard isn't under /system. That's what he said
Sent from my Galaxy Nexus

If and only you have TWRP installed instead of CWM, you can flash another ROM from USB-OTG.
Now you have to sideload a ROM or flash factory image!

iovyroot for Nokia-N1(A5CNB19, A5FMB19 Supported)

source code here:
https://github.com/jemyzhang/iovyroot/tree/nokia-n1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since the system is verity on, seems no more things can do.
iovyroot binary for nokia n1:
20160922: View attachment iovyroot.n1.zip
After get the root privilege, boot and recovery can be flashed by dd, with the recovery, the corresponding update package can be flashed by adb sideload.
And also, the boot can be repack for verity off and also the selinux can be disabled.
- turn off selinux
add cmdline parameter: androidboot.selinux=permissive
- turn off system verity
change the fstab, remove "verify" option

How to use it?
Any guide or root step?

jemyzhang said:
iovyroot binary for nokia n1:
20160922: View attachment 3883559
Click to expand...
Click to collapse
latheliao said:
How to use it?
Any guide or root step?
Click to expand...
Click to collapse
ZIP-file with binary attached by jemyzhang contains a guide. Seems to be quite simple to follow.
I can't test it as I'm still on 5.0.2 (CN rooted, but for unkown reasons still unable to flash to FM version) - but it's probably worth a try for those who have already updated to CN or FM 5.1.1 and are stuck with a non-rooted N1.
If there are any voluntaries - please post detailed report. N1-community would definitely appreaciate it! It is such a beautiful device.
It would be especially great if someone with a CN 5.1.1 could report success (I guess it would be a three-step-approach: rooting CN 5.1.1, then switching to FM 5.1.1, then probalby necessary to root again?)

I will test this when I have time (later this week I hope). I will definetely post a guide if I succeed with this.

the boot partition is verity off, you can flash the recovery(FM) to the boot partition, and flash the FM package with sideload.

Hi Jemy,
Really appreciate your work on Nokia N1 and I'm so glad that it is possible to root devices with A5CNB19. However, as a rookie, I have no idea how to follow your guidance and successfully root the tablet. Could you please update some detailed instructions on how to root this device? Thanks again for your kindly work on this tablet.
David
jemyzhang said:
the boot partition is verity off, you can flash the recovery(FM) to the boot partition, and flash the FM package with sideload.
Click to expand...
Click to collapse

steps for change rom from A5CNB19 to A5FMB19
stock recovery of A5FMB19: View attachment recovery.img.zip
for whom want to flash from A5CNB19 to A5FMB19.
A5FMB19 rom download: A5FMB19_update.zip
Important: bootloader must be unlocked. If the bootloader was locked, boot partition will also be verified.
- Unlock bootloader
Attention: data will be lost if you unlock your device
1. enter into fastboot by hold power and volume up key while power on
2. use the following command to unlock the bootloader
Code:
fastboot oem unlock
3. choose "Yes" in the next screen
Steps for flash:
1. boot into fastboot
2. flash recovery image with the following command:
Code:
fastboot flash boot recovery.img
3. boot into 'normal' mode, this will actually boot into recovery
4. press "power" + "vol up" key, which will leading to the text mode
5. choose "apply update from ADB" and confirm with power key
6. upload stock FMB19 package with sideload from pc:
Code:
adb sideload A5FMB19_update.zip

steps for rooting A5FMB19
[Download Section]
- original boot image for FMB19:View attachment boot-A5FMB19.img.zip
- custom recovery: View attachment n1_twrp_fmb19.img-by-jemyzhang.zip
- magiskv6: View attachment Magisk-v6-for-nokia-n1-mod-by-jemyzhang.zip
---- apk: View attachment Magisk_Manager_v1.2.apk
- superuser: View attachment phh-superuser-17-magisk-for-x86-64-mod-by-jemyzhang.zip
---- apk: install from play store me.phh.superuser
magisk v7: pull request has been pushed, waiting for merge.
[Preparation]
Code:
adb push boot.img /sdcard/
adb push Magisk-v6-for-nokia-n1-mod-by-jemyzhang.zip /sdcard/
adb push phh-superuser-17-magisk-for-x86-64-mod-by-jemyzhang.zip /sdcard/
[flash twrp recovery]
first of all unlock the boot loader
1.1. boot into fastboot
1.2. flash recovery image with the following command:
Code:
fastboot flash boot n1_twrp_rec.img
1.3. boot into 'normal' mode, this will actually boot into recovery
[restore boot image]
- restore back the orignal FMB19 boot image:
flash boot.img from recovery(switch to image mode)
[flash magisk and phh-supersu]
That's all
[Anything not ready for twrp]
1. adbd, usb connection error
2. graphic, low performance for text display
3. no signature:::: so flash into recovery partition is impossible

How to unlock boot loader??

Any one try the method? N1 can not unlock bootloader by command from adb before.
Sent from my Redmi Note 3 using XDA-Developers mobile app

Fail to root A5FMB19
I have tried "steps for rooting A5FMB19", but I failed.
As you say, first I adb push three files to the sdcard of N1. Then I unlock the bootloader. But when I unlock it, all the data in the tablet will be cleared.
So, when I want to flash boot.img from recovery, I can't find them in my tablet.

damoguyanzero said:
I have tried "steps for rooting A5FMB19", but I failed.
As you say, first I adb push three files to the sdcard of N1. Then I unlock the bootloader. But when I unlock it, all the data in the tablet will be cleared.
So, when I want to flash boot.img from recovery, I can't find them in my tablet.
Click to expand...
Click to collapse
me too
---------- Post added at 09:59 AM ---------- Previous post was at 09:54 AM ----------
do you have the recovery of A5CNB19，i wanna go back to that version, thank you very much

I have taken your step to root my device . However the twrp failed to mount /data and unable to mount storage .
So could you help me to solve this problem ?
Thank you !

damoguyanzero said:
I have tried "steps for rooting A5FMB19", but I failed.
As you say, first I adb push three files to the sdcard of N1. Then I unlock the bootloader. But when I unlock it, all the data in the tablet will be cleared.
So, when I want to flash boot.img from recovery, I can't find them in my tablet.
Click to expand...
Click to collapse
any solution?

realceday said:
any solution?
Click to expand...
Click to collapse
fist unlock the divice, then restart to the system, if the restart doesn't work, you should flash "fastboot –w" in the fastboot modle。after that, copy the files into your divice, then go to the fastboot and flash twrp。
if you can read chinese, read baidu tieba, goto the nokian1 section(i can't post the url)

Have anyone succeeded with this method ?

I can confirm this working.
Several notes to make:
1. from what I understand, the iovyroot method is only POC, and unrelated to the second approach. ( I actually tried this approach and couldn't get root access)
2. the second approach works for me. Note that both magisk and phh-supersu require two steps of installation: first flash in recovery, and install the correspoding apk in android.
Thank you jemyzhang!

Not able to push the iovyroot.n1 it says : permission denied . even in recovery as in fastboot as in normal boot
i'm actually using A5FMB19

Question Red Warning and UnWorking Lockscreen. HELP

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, dear owners of this beautiful device.
After an unsuccessful attempt to get root, such a warning appeared, plus the ability to lock the screen disappeared. As a result, I didn't get root either and problems arose)
Could you show the instructions how to fix everything step by step and get root? Thanks)

Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...

redmgicUSER8 said:
Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...
Click to expand...
Click to collapse
did anything happen?

Stusick said:
Did anything happen?
Click to expand...
Click to collapse
Nothing yet... I'm trying to contact the support team. They can only do so much remotely

i have this error also what should i do?
the phone not boot up
the red warning are stuck

yakir150 said:
i have this error also what should i do?
the phone not boot up
the red warning are stuck
Click to expand...
Click to collapse
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot

[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
okay i try it and still no luck the same problem

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.

[email protected] said:
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.
Click to expand...
Click to collapse
my phone is eu and using 4.18
can i use 3.19?
it's ok?

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
For QFIL, use Flat Build and in the configuration use ufs. Good luck!

yakir150 said:
my phone is eu and using 4.18
can i use 3.19?
it's ok?
Click to expand...
Click to collapse
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.

[email protected] said:
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.
Click to expand...
Click to collapse
okay i will try and let you know
thank you very much

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
If QFIL does not work, you need to do side load the rom multiple times again then it might work!

turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"

izsdeaman said:
turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"
Click to expand...
Click to collapse
The command on PC shows "Too many arguments." The Termux one works. Thanks!

[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
Tahnk you very very very much.