Develop Bugs

[RECOVERY] ClockworkMod Recovery *CDMA Edition*

ClockworkMod 5.5.0.4 for Galaxy Nexus *CDMA Edition*
Download Link
MD5: b2d31c29b7ef785f9c0802a12264d322
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Gain Root and Unlock Bootloader
1. Download root package: Link
2. Download CWM: Link
3. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
4. Unlock the bootloader if locked (fastboot oem unlock) then reboot into fastboot mode again
5. Temporarily flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img)
6. Boot into recovery (Press Volume Up twice until you see "Recovery mode" then press the Power button)
7. Using CWM, install su.zip that you downloaded in step 1
8. Reboot into the OS
9. You are now rooted
How to Install ClockworkMod
1. Install Root Explorer from the market and delete /system/recovery-from-boot.p *Mount as R/W first* See this link for help
2. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
3. Flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img)
4. Reboot into OS (fastboot reboot)
5. You now have CWM recovery permanently installed
How to Access ClockworkMod
1. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
2. Press Volume Up twice
3. Press the Power button when you see "Recovery mode" selected​
**All credit goes to to Koush and anyone else responsible for ClockworkMod**

The final version has been released. Enjoy.

looks like I will be the guinea pig and try it first...here goes nothing!
Update: Confirmed Working!! Making a backup, then flashing a rom
Update 2: Backup worked, mount USB storage from CWM fails, so I have to load into the phone since we got no SD Card

Boots into CMW... Should I try a ROM?
Backup appears to work....
Mount SD didn't work.... Although I didn't figure it would...

is this working correctly??

flashed and installed. Did a nandroid backup to test and worked well. thanks!

I flashed this LTE recovery image over an hour ago and the recovery flashed just fine and I was able to get into recovery and make a backup. Nice job!

nice.. so are you guys flashing anything?? or staying stock at the moment.

subscribing... waiting to unlock till recovery is confirmed working in OP

yamaha83 said:
subscribing... waiting to unlock till recovery is confirmed working in OP
Click to expand...
Click to collapse
just flashed it.. all is good for me.. running nandroid now.

bad news.
did a nandroid, installed superboot for root access, and tried to return to CWM to install a mod but I keep getting the red triangle.

ihyln said:
bad news.
did a nandroid, installed superboot for root access, and tried to return to CWM to install a mod but I keep getting the red triangle.
Click to expand...
Click to collapse
That's most likely cause your stock recovery was put back by the recovery script.

Having issues on my Mac. I did the flash, I see the status on the device, but I can't seem to get the recovery to take. It just dumps me into the stock recovery.
./fastboot-mac flash recovery LTErecovery_cwr.img
sending 'recovery' (5300 KB)... OKAY
writing 'recovery'... OKAY
Click to expand...
Click to collapse

I re-pushed CWM recovery and seems to be running fine now. Just installed a mod without issues.

has anyone gotten OTA to install after flashing this lte cwm?
If not, any advice on getting stock recovery back for LTE model?

Luxferro said:
That's most likely cause your stock recovery was put back by the recovery script.
Click to expand...
Click to collapse
Yup this problem keeps coming up. I have to push the CWM recovery every so often. What's the fix for this?

Question. I'm getting 'fastboot' is not recognized...etcetc' when I'm trying to flash the recovery. Noob issue I know. Should i be normally booted up into android when I run that script? I'm unlocked and rooted already.
I pretty much just plugged my phone in, put the downloaded file in the root of my harddrive and made sure cmd was pointing there and ran the script. and it gave me that message that I said above

guitarevan07 said:
Question. I'm getting 'fastboot' is not recognized...etcetc' when I'm trying to flash the recovery. Noob issue I know. Should i be normally booted up into android when I run that script? I'm unlocked and rooted already.
I pretty much just plugged my phone in, put the downloaded file in the root of my harddrive and made sure cmd was pointing there and ran the script. and it gave me that message that I said above
Click to expand...
Click to collapse
no, your phone needs to be in fastboot (From off, hold volume up and down and power). then run that.

Weird I couldn't get into recovery.
I was already unlocked so I booted to fastboot, ran the "fastboot flash recovery LTErecovery_cwr.img" command, which worked, then ran "fastboot reboot".
Went back into fastboot, choose Recovery, and all I got was the red triangle until it rebooted itself back into the OS.

i am definitely in recovery, but have not tested doing a backup or restore. I am really trying to get CWR off so that i can run the OTA upgrade, but i dont think there is a stock recovery img file out yet.
---------- Post added at 07:37 PM ---------- Previous post was at 07:21 PM ----------
Got the stock recovery.. someone helped me out in my thread! the dump got posted online which is where i got if from. Mine is updating now!
http://forum.xda-developers.com/showthread.php?p=20335431&posted=1#post20335431

[q] please help to root my android

Dear All
Why I always failure do rooting for my SAMSUNG GALAXY WONDER
Android version : 2.3.6
Baseband Version : I815DXKL1
Kernel Version : 2.6.35.7-perf-I8150DXLA2-CL869223
Build Number : GINGERBREAD.DXLA2
Always failure......
Have try with superone click, rooting by SD CARD and unlock root engine nothing happened with my android.
I really need brief tutorial about this. maybe anyone here can help me to solve this.

Are u sure u following the instructions one by one with care.?
sent from another space

yes bos...but always failure. if u have update rooting pls send to me
jahlee said:
Are u sure u following the instructions one by one with care.?
sent from another space
Click to expand...
Click to collapse

budiandroid said:
Dear All
Why I always failure do rooting for my SAMSUNG GALAXY WONDER
Android version : 2.3.6
Baseband Version : I815DXKL1
Kernel Version : 2.6.35.7-perf-I8150DXLA2-CL869223
Build Number : GINGERBREAD.DXLA2
Always failure......
Have try with superone click, rooting by SD CARD and unlock root engine nothing happened with my android.
I really need brief tutorial about this. maybe anyone here can help me to solve this.
Click to expand...
Click to collapse
we have same FW....i used Rooting via Recovery mode(SD card) try it....
http://forum.xda-developers.com/showthread.php?t=1317394

ganesh8586 said:
we have same FW....i used Rooting via Recovery mode(SD card) try it....
http://forum.xda-developers.com/showthread.php?t=1317394
Click to expand...
Click to collapse
Failure also

What do you mean by "failure?"

Really?????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Failure means still not rooting....do many times and always fail

Please refer to a thread by TheE as firmware 2.3.6 cannot be rooted via DoomLord method must be done via Recovery
Sent from my GT-I8150 using xda premium

Use Recovery Mode to Root your device when the firmware v2.3.6

already follow this tutorial http://forum.xda-developers.com/show....php?t=1317394 but is not working.
Anyone here have the update file for rooting?

budiandroid said:
already follow this tutorial http://forum.xda-developers.com/show....php?t=1317394 but is not working.
Anyone here have the update file for rooting?
Click to expand...
Click to collapse
This is my guess:
Did you flash other recovery (e.g CWM) before applying the update.zip?
It happens to me before, the update.zip not working.
To do this, need the original recovery.
So if you can:
1) Flash back original 2.3.6 ROM
2) Apply the update.zip using the ORIGINAL recovery.
Then, you flash CWM.

Cannot root?!?
AdliHebat said:
This is my guess:
Did you flash other recovery (e.g CWM) before applying the update.zip?
It happens to me before, the update.zip not working.
To do this, need the original recovery.
So if you can:
1) Flash back original 2.3.6 ROM
2) Apply the update.zip using the ORIGINAL recovery.
Then, you flash CWM.
Click to expand...
Click to collapse
Rooting my GT-I8150 on GB 2.3.6 fails with recovery method (sdcard), because I do not get to the recovery menu - instead it updates something straight away and then (without me giving a chance to read the few lines it writes on the screen) the phone reboots
(update.zip is in mnt/sdcard/update.zip)
My phone details:
Please help me root my GT-I8150 (my ultimate goal is to install a custom ROM/KitKat).
Frugi

Frugi said:
Rooting my GT-I8150 on GB 2.3.6 fails with recovery method (sdcard), because I do not get to the recovery menu - instead it updates something straight away and then (without me giving a chance to read the few lines it writes on the screen) the phone reboots
(update.zip is in mnt/sdcard/update.zip)
My phone details:
Please help me root my GT-I8150 (my ultimate goal is to install a custom ROM/KitKat).
Frugi
Click to expand...
Click to collapse
If you don't want to keep using your Android 2.3.6 and if your goal is to flash KK on your phone, then you might try this method:
Optional step: make a backup of your contacts, sms, calendar entries and whatnot using Go Backup Pro (you can get it from Google Play store). Or, if you're planning on going back to Samsung stock 2.3.6, after flashing CWM Recovery (see below), make a nandroid backup of the stock ROM (you can find the option under "backup and restore" in CWM Recovery).
Also, if you've got documents, pictures etc, you might want to make a backup of those as well somewhere on your computer, or the External SD card.
1. Flash this CWM Recovery using ODIN (+ Samsung USB driver, of course), or Flashify (you can get it from Google Play Store) or via ADB
2. Get the KK ROM and the Gapps from here and save them on your External SD card.
3. Enter CWM (long press Menu button + Volume Up + Power button until you see the CWM logo, then release the power button) and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install CM11 (from the external sd)
install Gapps for KK (from the external sd)
reboot your phone
Same procedure can be applied when flashing any custom ROM (minus the first step which you will only need to do once).

i refer to this thread. its good

budiandroid said:
Failure means still not rooting....do many times and always fail
Click to expand...
Click to collapse
Re-flash the Stock Gingerbread and use its Stock Recovery for flashing the "update.zip" file from internal SD card. No fail.

[Q] Erase my OS in Galaxy Nexus by accident

Hi I need some helps here
My galaxy nexus 4.2.2 rooted
CWM installed
Wiped my system via advance setting and now it say that i dont have any OS in my phone
Rooting process was done using toolkit
I tried to flash 4.3 to my GN and this is what i get from my screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i wonder if anyone there could help me ?
thanks

Screenshot not working.
Flash stock ROM using fastboot.
https://developers.google.com/android/nexus/images
Questions regard the toolkit goes to the toolkit thread.
Questions in the Q&A section ONLY.
Beamed from my Maguro.

use adb push
and flash a random rom.

Use adb sideload and sideload another rom.
Sent from my Galaxy Nexus using Tapatalk 4 Beta

sui785 said:
Use adb sideload and sideload another rom.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Download a custom rom from this forum, Cyanogenmod for example. So make sure you have a .zip file. Then make sure ADB is fully working on your computer/laptop/iStone and do the following:
- Start your phone in recovery mode:
1. vol down + vol up + power while the phone is off
2. Select "recovery mode" with the volume buttons and press power to confirm
>phone boots into CWM
- Go to storage/mounts and mount system (mount your system partition)
- Open a CMD window on your computer and navigate to where your Android SDK is (/pathhere/android-sdk/platform-tools/)
- For ease of use put the rom you just downloaded (the .zip file) in that platform-tools folder.
- Now run these commands:
1. "adb remount"
2. "adb push nameofzipfile.zip /system/sdcard/"
- Now unmount system
- Go to flash a zip from your SD-card and you should see the zip file you just 'pushed' (copied)
Flash away and your phone should be at least booting again.
Other than that, this is the wrong forum for questions.

First, learn to post in the correct place. This is the development section, not the help section.

You posted in the wrong place, you dont serve help
g281274 said:
Hi I need some helps here
My galaxy nexus 4.2.2 rooted
CWM installed
Wiped my system via advance setting and now it say that i dont have any OS in my phone
Rooting process was done using toolkit
I tried to flash 4.3 to my GN and this is what i get from my screen shot
i wonder if anyone there could help me ?
thanks
Click to expand...
Click to collapse

B1nny said:
Download a custom rom from this forum, Cyanogenmod for example. So make sure you have a .zip file. Then make sure ADB is fully working on your computer/laptop/iStone and do the following:
- Start your phone in recovery mode:
1. vol down + vol up + power while the phone is off
2. Select "recovery mode" with the volume buttons and press power to confirm
>phone boots into CWM
- Go to storage/mounts and mount system (mount your system partition)
- Open a CMD window on your computer and navigate to where your Android SDK is (/pathhere/android-sdk/platform-tools/)
- For ease of use put the rom you just downloaded (the .zip file) in that platform-tools folder.
- Now run these commands:
1. "adb remount"
2. "adb push nameofzipfile.zip /system/sdcard/"
- Now unmount system
- Go to flash a zip from your SD-card and you should see the zip file you just 'pushed' (copied)
Flash away and your phone should be at least booting again.
Other than that, this is the wrong forum for questions.
Click to expand...
Click to collapse
WTH are you going on about? /system/sdcard/ ??? Mount /system to push a ROM to /sdcard/???

beekay201 said:
WTH are you going on about? /system/sdcard/ ??? Mount /system to push a ROM to /sdcard/???
Click to expand...
Click to collapse
I always had to mount /system in order to get ADB to find my device so that's what I recommended.

B1nny said:
I always had to mount /system in order to get ADB to find my device so that's what I recommended.
Click to expand...
Click to collapse
/sdcard isn't under /system. That's what he said
Sent from my Galaxy Nexus

If and only you have TWRP installed instead of CWM, you can flash another ROM from USB-OTG.
Now you have to sideload a ROM or flash factory image!

How to Root Desire EYE [Simple Guide]

Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!

I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks

pimpsuprazx said:
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
Click to expand...
Click to collapse
Bootloader unlocked?

Can you post a screenshot (PIC) ?

That what happened after flashing the recovery.img and booting into recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

johnyboo said:
That what happened after flashing the recovery.img and booting into recovery:
Click to expand...
Click to collapse
Same problem here.. Really sad.. Was the recovery image working???

jolishj said:
Same problem here.. Really sad.. Was the recovery image working???
Click to expand...
Click to collapse
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?

unforseenenemy said:
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
Click to expand...
Click to collapse
the same issue here
like the recovery is not compatible

Try using the recovery found here: http://forum.xda-developers.com/desire-eye/development/recovery-twrp-2-8-4-0-htc-desire-eye-t3008442

I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??

karo222 said:
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
Click to expand...
Click to collapse
System write protection.
There is a mod to disable that here: http://forum.xda-developers.com/des...e-disable-write-protection-v1-0-tool-t2966850
Or use a custom ROM, those have it disabled already.

I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos

I have exactly the same issue

hondalude89 said:
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
Click to expand...
Click to collapse
Only you have to Download BETA-SuperSU-v2.71-20160331103524.zip and flash it. Issue Solved

I did all the steps and everythign went fine, but then I downloaded a RootChecker app and it says I dont have root access. How can I make sure everything worked? NVM I GOT IT FIXED THANX ALOT FOR THIS POST!!!

Shameera_N said:
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
Click to expand...
Click to collapse
It is not working on my HTC DESIRE EYE
Error: The code execution cannot proceed because RAPI.DLL was not found.
Troubleshooting steps:
1. Make sure the downloaded file is unzipped
2. USB Debugging enabled
3. On my phone i selected the option, USE USB FOR: "usb file transfer"
4. On my phone I also tried selecting the option, USE USB FOR: "CD Installer"
5. Restart Phone, Mobile and the downloaded file

I can't install TWRP on my XPERIA M.

Hey everyone, i'm new here, it's my first post, so please be forgiving just in case
My goal is to install custom ROM, so first I unlocked bootloader via Flashtool. It worked well.
Then I rooted the phone via KingRoot, it also worked well.
The next step I wanted to do was install the custom recovery (TWRP), so I installed TWRP Manager app and it failed
I installed it via Terminal Emulator app following the instructions on the twrp website and it kind of worked, but I can't get into TWRP...
Turning of the phone, holding the volume down button doesn't work. It's just booting the system. How to fix it? Maybe i'm booting to the recovery wrong?
Help me please, thanks in advance. And sorry for my bad english

Terminal Emulator: "su" then "reboot recovery"
OR power on the device and push Volume Up several times. Usually the LED turns blue and TWRP is booting.

mankokoma said:
Terminal Emulator: "su" then "reboot recovery"
OR power on the device and push Volume Up several times. Usually the LED turns blue and TWRP is booting.
Click to expand...
Click to collapse
Both methods failed :/

zagoor said:
...twrp website and it kind of worked....
Both methods failed :/
Click to expand...
Click to collapse
So obviously it did not work? I assume you are on stock rom 4.3 - so I would suggest to do it as explained here:
CM13 Nightlies:
PecanCM said:
...
[*]TWRP FOTA recovery is recommended, follow this thread for instructions
Download:
Nightly: http://download.cyanogenmod.org/?device=nicki&type=nightly
Install instructions:
Before you install make sure you are on 4.3 firmware 1st with your bootloader is Unlocked and a cwm/twrp recovery installed. if you haven't installed recovery then flash boot.img from this rom zip via fastboot.
boot into recovery
Wipe data and cache
Flash the rom and gapps zip
Reboot
...
Click to expand...
Click to collapse
Another Way could be to flash NUI-Kernel. It has built in the TWRP recovery.
But ATTENTION!!!: Both ways won't let you boot the Stock ROM !!!

mankokoma said:
So obviously it did not work? I assume you are on stock rom 4.3 - so I would suggest to do it as explained here:
CM13 Nightlies:
Another Way could be to flash NUI-Kernel. It has built in the TWRP recovery.
But ATTENTION!!!: Both ways won't let you boot the Stock ROM !!!
Click to expand...
Click to collapse
Yes, i'm on the stock rom 4.3 by sony. The instructions are saying that I have to boot into recovery which I can't do... I even tried to install recovery by command shell in windows and fastboot, but this screen appeared:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you tried with Flashtool? They say that after unlocking bootloader the official Sony tools won't work anymore. I'm not sure why nothing works for you. So I do erverything under linux environment and don't know how it works with the Windows tools. E.g. I know the behavior of adb shell looks very different under windows.... Maybe someone else has better ideas....!?!

I assume you want to flash cm 13.
First, download the rom. Then open the ZIP file and copy the boot.img into a folder. Then fastboot flash boot boot.img
---------- Post added at 07:23 PM ---------- Previous post was at 07:22 PM ----------
adi2500 said:
I assume you want to flash cm 13.
First, download the rom. Then open the ZIP file and copy the boot.img into a folder. Then fastboot flash boot boot.img
Click to expand...
Click to collapse
Then are you able to enter twrp through pressing vol up while boot (led will turn blue)

Will installing cm13 this way be clean or dirty flash?
Im using c1905 4.3