ClockworkMod 5.5.0.4 for Galaxy Nexus *CDMA Edition*
Download Link
MD5: b2d31c29b7ef785f9c0802a12264d322
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Gain Root and Unlock Bootloader
1. Download root package: Link
2. Download CWM: Link
3. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
4. Unlock the bootloader if locked (fastboot oem unlock) then reboot into fastboot mode again
5. Temporarily flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img)
6. Boot into recovery (Press Volume Up twice until you see "Recovery mode" then press the Power button)
7. Using CWM, install su.zip that you downloaded in step 1
8. Reboot into the OS
9. You are now rooted
How to Install ClockworkMod
1. Install Root Explorer from the market and delete /system/recovery-from-boot.p *Mount as R/W first* See this link for help
2. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
3. Flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img)
4. Reboot into OS (fastboot reboot)
5. You now have CWM recovery permanently installed
How to Access ClockworkMod
1. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
2. Press Volume Up twice
3. Press the Power button when you see "Recovery mode" selected
**All credit goes to to Koush and anyone else responsible for ClockworkMod**
The final version has been released. Enjoy.
looks like I will be the guinea pig and try it first...here goes nothing!
Update: Confirmed Working!! Making a backup, then flashing a rom
Update 2: Backup worked, mount USB storage from CWM fails, so I have to load into the phone since we got no SD Card
Boots into CMW... Should I try a ROM?
Backup appears to work....
Mount SD didn't work.... Although I didn't figure it would...
is this working correctly??
flashed and installed. Did a nandroid backup to test and worked well. thanks!
I flashed this LTE recovery image over an hour ago and the recovery flashed just fine and I was able to get into recovery and make a backup. Nice job!
nice.. so are you guys flashing anything?? or staying stock at the moment.
subscribing... waiting to unlock till recovery is confirmed working in OP
yamaha83 said:
subscribing... waiting to unlock till recovery is confirmed working in OP
Click to expand...
Click to collapse
just flashed it.. all is good for me.. running nandroid now.
bad news.
did a nandroid, installed superboot for root access, and tried to return to CWM to install a mod but I keep getting the red triangle.
ihyln said:
bad news.
did a nandroid, installed superboot for root access, and tried to return to CWM to install a mod but I keep getting the red triangle.
Click to expand...
Click to collapse
That's most likely cause your stock recovery was put back by the recovery script.
Having issues on my Mac. I did the flash, I see the status on the device, but I can't seem to get the recovery to take. It just dumps me into the stock recovery.
./fastboot-mac flash recovery LTErecovery_cwr.img
sending 'recovery' (5300 KB)... OKAY
writing 'recovery'... OKAY
Click to expand...
Click to collapse
I re-pushed CWM recovery and seems to be running fine now. Just installed a mod without issues.
has anyone gotten OTA to install after flashing this lte cwm?
If not, any advice on getting stock recovery back for LTE model?
Luxferro said:
That's most likely cause your stock recovery was put back by the recovery script.
Click to expand...
Click to collapse
Yup this problem keeps coming up. I have to push the CWM recovery every so often. What's the fix for this?
Question. I'm getting 'fastboot' is not recognized...etcetc' when I'm trying to flash the recovery. Noob issue I know. Should i be normally booted up into android when I run that script? I'm unlocked and rooted already.
I pretty much just plugged my phone in, put the downloaded file in the root of my harddrive and made sure cmd was pointing there and ran the script. and it gave me that message that I said above
guitarevan07 said:
Question. I'm getting 'fastboot' is not recognized...etcetc' when I'm trying to flash the recovery. Noob issue I know. Should i be normally booted up into android when I run that script? I'm unlocked and rooted already.
I pretty much just plugged my phone in, put the downloaded file in the root of my harddrive and made sure cmd was pointing there and ran the script. and it gave me that message that I said above
Click to expand...
Click to collapse
no, your phone needs to be in fastboot (From off, hold volume up and down and power). then run that.
Weird I couldn't get into recovery.
I was already unlocked so I booted to fastboot, ran the "fastboot flash recovery LTErecovery_cwr.img" command, which worked, then ran "fastboot reboot".
Went back into fastboot, choose Recovery, and all I got was the red triangle until it rebooted itself back into the OS.
i am definitely in recovery, but have not tested doing a backup or restore. I am really trying to get CWR off so that i can run the OTA upgrade, but i dont think there is a stock recovery img file out yet.
---------- Post added at 07:37 PM ---------- Previous post was at 07:21 PM ----------
Got the stock recovery.. someone helped me out in my thread! the dump got posted online which is where i got if from. Mine is updating now!
http://forum.xda-developers.com/showthread.php?p=20335431&posted=1#post20335431
Related
ClockworkMod 5.5.0.2 for Galaxy Nexus *GSM Edition*
Download Link
MD5: 445887336a863573997ccbaeedddc984
File Size: 5,427,200 bytes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Gain Root and Unlock Bootloader
1. Download root package: Link
2. Download CWM: Link
3. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
4. Unlock the bootloader if locked (fastboot oem unlock) then reboot into fastboot mode again
5. Temporarily flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.2-maguro.img)
6. Boot into recovery (Press Volume Up twice until you see "Recovery mode" then press the Power button)
7. Using CWM recovery, install su.zip that you downloaded in step 1
8. Reboot into the OS
9. You are now rooted
How to Install ClockworkMod
1. Install Root Explorer from the market and delete /system/recovery-from-boot.p *Mount as R/W first* See this link for help
2. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
3. Flash CWM (fastboot flash recovery recovery-clockwork-5.5.0.2-maguro.img)
4. Reboot into OS (fastboot reboot)
5. You now have CWM recovery permanently installed
How to Access ClockworkMod
1. Reboot into Fastboot Mode: Power off your device and (Power + Volume Up and Down)
2. Press Volume Up twice
3. Press the Power button when you see "Recovery mode" selected
**All credit goes to to Koush and anyone else responsible for ClockworkMod**
Awesome. This will make rooting even easier. Just unlock, flash CWM and then install su from there.
Does this recovery work?
I have flashed the same recovery via rom manager and it just comes up with a black screen
Koush has said he will fix it in the next few days
Sent from my Galaxy Nexus using Tapatalk
Protip: Test something before you post it. This does NOT work at the time of writing.
P
spences10 said:
Does this recovery work?
I have flashed the same recovery via rom manager and it just comes up with a black screen
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Same here black screen when booting to recovery
punkrjb said:
Same here black screen when booting to recovery
Click to expand...
Click to collapse
This was already posted a few days ago and it was stated that it didnt work and the link removed.
I have removed the link from the original post until its working and then the first person to post the information (or the developer) will have the right to post it.
Mark.
Working download link and new version is now up.
Can, reportedly, also be gotten through the ROM Manager.
FISKER_Q said:
Can, reportedly, also be gotten through the ROM Manager.
Click to expand...
Click to collapse
Yeah, works flashed it and am now flashing one of FitsSnugly's AOSP builds
spences10 said:
Yeah, works flashed it and am now flashing one of FitsSnugly's AOSP builds
Click to expand...
Click to collapse
fitsnugly got a GN build up? WHERE?
Can you backup your stock Recovery before flashing CWM Recovery?
There's some reports on Koush's twitter that superuser doesn't work on CWM on the Nexus
Niksko said:
There's some reports on Koush's twitter that superuser doesn't work on CWM on the Nexus
Click to expand...
Click to collapse
for me its working well. just made backup and using SU after etc. no issue at all
but i installed cwm from ROM manager instead
How does CWM save/store its ROMS, and where does it load from? With the Xoom, without a working SD, it was not possible to use CWM.
If the onboard storage is all one volume with the OS, is the storage included in the backup, and how is the images written if the storage is needed to hold the ROMS to be flashed?
StuMcBill said:
Can you backup your stock Recovery before flashing CWM Recovery?
Click to expand...
Click to collapse
I'd like to know this too. I found something that would back it up, but you need root first. I'd like to be able to back it up before rooting if possible.
Niksko said:
I'd like to know this too. I found something that would back it up, but you need root first. I'd like to be able to back it up before rooting if possible.
Click to expand...
Click to collapse
Rooting shouldn't affect the Recovery partition so you should be able to safely root then backup your stock recovery before installing ClockworkMod Recovery?
Or if someone backs up theirs you could download it and keep a copy of it?
Anyone can post here recovery.fstab ?
I have just installed Rom Manager and I get a FC but it seems to have installed the CWM OK. It successfully rebooted to CWM and I could navigate around but I didn't try flashing anything yet.
The issue may be more with Rom Manager than the recovery
Installed CWM just fine, however when i try to do a nandroid backup it says "Can't mount backup path" or when i try to browse for a zip to install "Can't mount /sdcard/".
My first guess is that it is because i encrypted my phone, but i believe it works on my Xoom, which is encrypted as well... (I will check this later when i have my Xoom nearby)
FYI, this recovery also is confirmed working on my VZW LTE version.
Backups are approximately 6-700MB and are ext4.tar files for system, data and cache.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.4.4
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
make shure that partion is mmcblk0p6 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.3.3
Second Method Is Via ODIN.
First Download ODIN
Now Download the N8000/N8013-CWM-6.0.4.4.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select N8000/N8013-CWM-6.0.4.4.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix @invisiblek {These Guys Are The Best And I Thank Them for helping me every step in the way and not thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads And Q&A
Downloads :
1.IMAGES
N8000-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
N8013-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.TAR FILES
N8000-CWM-6.0.4.4.tar Build #1 {For Odin}
N8013-CWM-6.0.4.4.tar Build #1 {For Odin}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For Later Use
it can't mount the external sd
iRoNX said:
it can't mount the external sd
Click to expand...
Click to collapse
seriously i did not notice such error, i will see what i can do tomrrow Thanks
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Shmong said:
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Click to expand...
Click to collapse
Well thats odd :/ are you sure you have n8000 build not n8013 as i am recovery fine
Yes, i'm pretty sure. I've tried to do this few times via both terminal and odin. Now will try one more time...
UPD: I've repacked the img file with the tar archiver+ put md5 checksum (tar.md5) and flashed it with odin successfully.
And like iRoNX said it can't mount extSD: "error mounting /storage/sdcard1"
UPD2: The recovery from similar thread have another issue: cannot format "/data" and cannot explore internal flash )))
Shmong said:
First, PC odin couldn't flash the device with this recovery (Odin 3.7, PC Win 8.1 x64, Odin works fine with it, checked many times).
After flashing this recovery from terminal it cannot boot by some reasons, and i'm rebooted the device with terminal command "reboot recovery", and i get the bootloop with the orange styled frame of "CWM-based recovery 6.0.4.4", then i reflashed the old version with odin.
P.S. My ROM is ARHD. Device: N8000.
Click to expand...
Click to collapse
+1.
The Odin tar file is not OK. Although I did not get a bootloop, the indicator on phone in download mode goes to the end and then stays there at "NAND write". I has to disconnect the phone and reboot manually, and my old version of CWM was still there (phew!). The .img files and dd worked fine.
Thanks anyways for this update !!!! It worked to get me on JB 4.4 !
Update: When phone is powered off and charger connected, upon starting there is a garbled green image that comes on for several seconds - most likely the battery charging icon - and then the phone will start up. It was not there before flashing 6.0.4.4. Anyways my phone does start up........
Tar file not working.. gets stuck at "Nandwrite"
Thanks for the recovery, I made it into CWM zip files so you can flash in CWM or TWRP here:
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8000-CWM-Recovery-v6.0.4.4.zip
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8013-CWM-Recovery-v6.0.4.4.zip
zedomax said:
Thanks for the recovery, I made it into CWM zip files so you can flash in CWM or TWRP here:
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8000-CWM-Recovery-v6.0.4.4.zip
http://downloadandroidrom.com/file/GalaxyNote10.1/recovery/GT-N8013-CWM-Recovery-v6.0.4.4.zip
Click to expand...
Click to collapse
Way to go, champion !!
Flashed but the external SD card doesn't work
Sent from my GT_N8000
ODIN Image file attached.
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
SD cards problem
Hello again,
Within this version of CWM, the SD card problem seems to be only for the 64g cards as tested on my N8013. However, after you flash the Rom you'll using, there is no problem with 64g cards outside of CWM recovery mode.
Smaller sized cards 32g and less will mount fine while you are in CWM recovery mode.
Cheers,
L
lobo25 said:
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
Click to expand...
Click to collapse
Not working for me... says img. file is invalid. then ends.
Love it. Thanks.
lobo25 said:
Hello,
The N8013 Odin file in the 1st post does not work as some mentioned in comments. I went ahead and created a proper Odin package from the other images which I am attaching for anyone who needs it. Please unrar and you'll find the .tar.md5 file to use with Odin.
Cheers,
L
Click to expand...
Click to collapse
Anyone confirm this as working?
Edit: Not working. Odin says invalid.
missing file
I seem to have lost my \efs folder, and in searching for a solution one of the steps I'm told to take is to flash "N8000-CWM-6.0.4.4.tar". However, it doesn't seem to exist anywhere (now that goo is gone), other than in this thread and the version here seems to be broken. Does anyone have the N8000 version of the .tar file?
Boot-loop, can't wipe device.
Hey everyone. I'm not exactly sure what happened, but it seems that my GT-N8000 is on the fritz again. The device was screen-off this morning (I left home) and when I came home it was in a reboot loop.
I jumped into recovery (CWM v6.0.4.4) to try to wipe both cache and dalvik (both successful) and rebooted. Same bootloop.
So then I decided to wipe the storage and reinstall the ROM (Gnabo v8 is what I had been running). When I attempt to "wipe data/factory reset", it says "formatting data . . ." and then reboots into the bootloop again.
Then I thought that maybe it was wiped, so I attempted to flash Gnabo. It installs successfully (Installing update, blue bar goes across, "Enjoy!" and "Install from sdcard complete."), however, when the installation starts, I get the first box and then it sits for almost 2 minutes before the blue bar appears, fills in just a few quick seconds, and then displays the completed message. It seems to me that the installation and the blue bar should be taking longer, but what do I know. Anyway, I rebooted (No, don't fix ROM flasing stock recovery on reboot), then back into the bootloop. So I'm still losing.
I don't know if it's related, but some months ago I had something similar happen in that the device was in a bootloop and it turned out that it had somehow lost the /efs folder. I had restored that (thanks XDA forums!) and it had been working fine since about June 2015.
I'm starting to think that my memory has gone bad, and that I basically have a 10.1 inch paperweight. Suggestions? Thanks for any help you can provide.
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
pimpsuprazx said:
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
Click to expand...
Click to collapse
Bootloader unlocked?
Can you post a screenshot (PIC) ?
That what happened after flashing the recovery.img and booting into recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
johnyboo said:
That what happened after flashing the recovery.img and booting into recovery:
Click to expand...
Click to collapse
Same problem here.. Really sad.. Was the recovery image working???
jolishj said:
Same problem here.. Really sad.. Was the recovery image working???
Click to expand...
Click to collapse
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
unforseenenemy said:
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
Click to expand...
Click to collapse
the same issue here
like the recovery is not compatible
Try using the recovery found here: http://forum.xda-developers.com/desire-eye/development/recovery-twrp-2-8-4-0-htc-desire-eye-t3008442
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
karo222 said:
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
Click to expand...
Click to collapse
System write protection.
There is a mod to disable that here: http://forum.xda-developers.com/des...e-disable-write-protection-v1-0-tool-t2966850
Or use a custom ROM, those have it disabled already.
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
I have exactly the same issue
hondalude89 said:
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
Click to expand...
Click to collapse
Only you have to Download BETA-SuperSU-v2.71-20160331103524.zip and flash it. Issue Solved
I did all the steps and everythign went fine, but then I downloaded a RootChecker app and it says I dont have root access. How can I make sure everything worked? NVM I GOT IT FIXED THANX ALOT FOR THIS POST!!!
Shameera_N said:
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
Click to expand...
Click to collapse
It is not working on my HTC DESIRE EYE
Error: The code execution cannot proceed because RAPI.DLL was not found.
Troubleshooting steps:
1. Make sure the downloaded file is unzipped
2. USB Debugging enabled
3. On my phone i selected the option, USE USB FOR: "usb file transfer"
4. On my phone I also tried selecting the option, USE USB FOR: "CD Installer"
5. Restart Phone, Mobile and the downloaded file
Hey everyone, i'm new here, it's my first post, so please be forgiving just in case
My goal is to install custom ROM, so first I unlocked bootloader via Flashtool. It worked well.
Then I rooted the phone via KingRoot, it also worked well.
The next step I wanted to do was install the custom recovery (TWRP), so I installed TWRP Manager app and it failed
I installed it via Terminal Emulator app following the instructions on the twrp website and it kind of worked, but I can't get into TWRP...
Turning of the phone, holding the volume down button doesn't work. It's just booting the system. How to fix it? Maybe i'm booting to the recovery wrong?
Help me please, thanks in advance. And sorry for my bad english
Terminal Emulator: "su" then "reboot recovery"
OR power on the device and push Volume Up several times. Usually the LED turns blue and TWRP is booting.
mankokoma said:
Terminal Emulator: "su" then "reboot recovery"
OR power on the device and push Volume Up several times. Usually the LED turns blue and TWRP is booting.
Click to expand...
Click to collapse
Both methods failed :/
zagoor said:
...twrp website and it kind of worked....
Both methods failed :/
Click to expand...
Click to collapse
So obviously it did not work? I assume you are on stock rom 4.3 - so I would suggest to do it as explained here:
CM13 Nightlies:
PecanCM said:
...
[*]TWRP FOTA recovery is recommended, follow this thread for instructions
Download:
Nightly: http://download.cyanogenmod.org/?device=nicki&type=nightly
Install instructions:
Before you install make sure you are on 4.3 firmware 1st with your bootloader is Unlocked and a cwm/twrp recovery installed. if you haven't installed recovery then flash boot.img from this rom zip via fastboot.
boot into recovery
Wipe data and cache
Flash the rom and gapps zip
Reboot
...
Click to expand...
Click to collapse
Another Way could be to flash NUI-Kernel. It has built in the TWRP recovery.
But ATTENTION!!!: Both ways won't let you boot the Stock ROM !!!
mankokoma said:
So obviously it did not work? I assume you are on stock rom 4.3 - so I would suggest to do it as explained here:
CM13 Nightlies:
Another Way could be to flash NUI-Kernel. It has built in the TWRP recovery.
But ATTENTION!!!: Both ways won't let you boot the Stock ROM !!!
Click to expand...
Click to collapse
Yes, i'm on the stock rom 4.3 by sony. The instructions are saying that I have to boot into recovery which I can't do... I even tried to install recovery by command shell in windows and fastboot, but this screen appeared:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried with Flashtool? They say that after unlocking bootloader the official Sony tools won't work anymore. I'm not sure why nothing works for you. So I do erverything under linux environment and don't know how it works with the Windows tools. E.g. I know the behavior of adb shell looks very different under windows.... Maybe someone else has better ideas....!?!
I assume you want to flash cm 13.
First, download the rom. Then open the ZIP file and copy the boot.img into a folder. Then fastboot flash boot boot.img
---------- Post added at 07:23 PM ---------- Previous post was at 07:22 PM ----------
adi2500 said:
I assume you want to flash cm 13.
First, download the rom. Then open the ZIP file and copy the boot.img into a folder. Then fastboot flash boot boot.img
Click to expand...
Click to collapse
Then are you able to enter twrp through pressing vol up while boot (led will turn blue)
Will installing cm13 this way be clean or dirty flash?
Im using c1905 4.3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, dear owners of this beautiful device.
After an unsuccessful attempt to get root, such a warning appeared, plus the ability to lock the screen disappeared. As a result, I didn't get root either and problems arose)
Could you show the instructions how to fix everything step by step and get root? Thanks)
Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...
redmgicUSER8 said:
Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...
Click to expand...
Click to collapse
did anything happen?
Stusick said:
Did anything happen?
Click to expand...
Click to collapse
Nothing yet... I'm trying to contact the support team. They can only do so much remotely
i have this error also what should i do?
the phone not boot up
the red warning are stuck
yakir150 said:
i have this error also what should i do?
the phone not boot up
the red warning are stuck
Click to expand...
Click to collapse
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
okay i try it and still no luck the same problem
yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.
[email protected] said:
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.
Click to expand...
Click to collapse
my phone is eu and using 4.18
can i use 3.19?
it's ok?
yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
For QFIL, use Flat Build and in the configuration use ufs. Good luck!
yakir150 said:
my phone is eu and using 4.18
can i use 3.19?
it's ok?
Click to expand...
Click to collapse
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.
[email protected] said:
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.
Click to expand...
Click to collapse
okay i will try and let you know
thank you very much
yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
If QFIL does not work, you need to do side load the rom multiple times again then it might work!
turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"
izsdeaman said:
turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"
Click to expand...
Click to collapse
The command on PC shows "Too many arguments." The Termux one works. Thanks!
[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
Tahnk you very very very much.