Develop Bugs

HTC Stock Rom Recovery Android 2.3.3 & 2.3.5

Hey guys,
for all those who want to have the orginal stock rom back here's a
recovery by me. It's Android 2.3.3 and 2.3.5. Flashable through cwm 5.
Android 2.3.3 Version: here
Android 2.3.5 Version: here
OC Kernel (806 MHz): here <= ONLY 2.3.5
You will find the downloads if you click "To Downloads" and then choose the one you want
Click the banner if you want to support me !
For me it works very stable and smoothly. If it doesn't boot and redirects you to the recovery: wipe data, cache and dalvik again and retry.
Questions please here in this thread and NOT per pn!
Best regards,
Maxi_king_223
http://lectrasxt16.ohost.de/

Not working for me "E:invalid command argument" tried several times with wiping all but just boots into recovery.

Ok,
First time i got the same problem.
try to flash an other rom with cwm and then wipe data, cache and dalvik.
after this flash the stock rom agian.
If this fails too, post the cmd-output please.
ps. Which version did you used?

oK, tried again and got the same, put a memory card in the phone and booted the phone up and it worked. Many thanks, .

well it just seems to be stuck at the waiting for device dialog for almost an hour now with the 2.3.3 version...........followed all the steps to the letter and am running a wildfire s gsm model with a sim card........waiting for some help.........dling the 2.3.5 now.....will try if it helps....................
and now the 2.3.5 also doesnt seem to work at all........it also gets stuck at the waiting for device dialog......any help????????????

pandollar said:
oK, tried again and got the same, put a memory card in the phone and booted the phone up and it worked. Many thanks, .
Click to expand...
Click to collapse
that's new to me with the memory card. well, thanks for your feedback

kill3rlook5 said:
well it just seems to be stuck at the waiting for device dialog for almost an hour now with the 2.3.3 version...........followed all the steps to the letter and am running a wildfire s gsm model with a sim card........waiting for some help.........dling the 2.3.5 now.....will try if it helps....................
and now the 2.3.5 also doesnt seem to work at all........it also gets stuck at the waiting for device dialog......any help????????????
Click to expand...
Click to collapse
did you install HTC sync with the htc drivers for your phone ?
when not --> try it http://dl4.htc.com/managed-assets/support/software/htc-sync/setup_3.0.5617.exe

Maxi_king_223 said:
that's new to me with the memory card. well, thanks for your feedback
Click to expand...
Click to collapse
Me to, but as long as it worked I'm happy, cheers
For info I used the 2.3.5 rom

Maxi_king_223 said:
did you install HTC sync with the htc drivers for your phone ?
when not --> try it http://dl4.htc.com/managed-assets/support/software/htc-sync/setup_3.0.5617.exe
Click to expand...
Click to collapse
thank u very much maxi for your reply.......but i have HTC sync installed on my system and i already have the htc drivers installed.......newasy for simplicity and for removing the doubts if any i reinstalled sync and then i tried to run the batch file provided by you......i evn tried flashing my phone from the command line but still everytime the console gets stuck at waiting for phone......aint able to understand it...........hope i get some help.......

kill3rlook5 said:
thank u very much maxi for your reply.......but i have HTC sync installed on my system and i already have the htc drivers installed.......newasy for simplicity and for removing the doubts if any i reinstalled sync and then i tried to run the batch file provided by you......i evn tried flashing my phone from the command line but still everytime the console gets stuck at waiting for phone......aint able to understand it...........hope i get some help.......
Click to expand...
Click to collapse
hmm.
could you please do the fowwowing ?
1. open command window in the directory of the recovery tool.
2. run "fastboot devices" and check if your device is listed.
3. if not, get the newtest fastboot .exe from here --> android sdk
it should be in xxx\android-sdk-windows\platform-tools. also copy adb.exe and AdbWinApi.dll and AdbWinApiUsb.dll into the recovery folder.
4. try again and run "fastboot devices".
5. if your device is listed : start flashing.

Maxi_king_223 said:
hmm.
could you please do the fowwowing ?
1. open command window in the directory of the recovery tool.
2. run "fastboot devices" and check if your device is listed.
3. if not, get the newtest fastboot .exe from here --> android sdk
it should be in xxx\android-sdk-windows\platform-tools. also copy adb.exe and AdbWinApi.dll and AdbWinApiUsb.dll into the recovery folder.
4. try again and run "fastboot devices".
5. if your device is listed : start flashing.
Click to expand...
Click to collapse
maxi man....u know wat u are the man........i downloaded the sdk and then i dint find anything in the platform tools.....i ran the sdk manager and installed the platform tools......i got all the updated files that i needed and then all i did was copied the same files u asked me to copy to the directory i had created from ur rom..........and then the flashing went on smoothly without any hiccups.....then followed ur steps.....powered down and restarted the phone....and lo......i got a bootloop....then remembered that i hadnt wiped the caches....and data.....wiped them and then redid the whole thing.....the thing booted and i get stock rom back.........wifi is giving me some problem....but i will let u know
BTW I sincerely clicked the thanks button ROFL

My wildfire s is back......and I am loving it....thanks to u maxi
Sent from my HTC Wildfire S A510e using xda premium

Well i see alot of people get problems, i would say that you will need to install an adb driver onto your computer to fix part of the problem and to make sure you have a memory card inserted with at least 15mb of free space inside of it.
CLICK THANKS IF THIS HELPED YOU
NOT HARD TO CLICK THANKS

It worked perfectly on mine, thanx a lot!!!

I'm glad i helped you
EDIT: Ah nearly i forgot: here's my email:Maxi_king_223 [at] live [dot] de
Please write only when you really do not get an answer from me here

I have a very important question here , previously i "played" with the /dev stuff , mostly the misc partition , and now i am having a partial usb brick , mostly caused by a malfunctioned misc partition , so will this fix anything ?? BTW , I tried flashing the ORIGINAL RUU from htc and nothing changed .... so will this work for me ?

seaskyways said:
I have a very important question here , previously i "played" with the /dev stuff , mostly the misc partition , and now i am having a partial usb brick , mostly caused by a malfunctioned misc partition , so will this fix anything ?? BTW , I tried flashing the ORIGINAL RUU from htc and nothing changed .... so will this work for me ?
Click to expand...
Click to collapse
did you change the partition? maybe i'm not sure.

Maxi_king_223 said:
Hey guys,
for all those who want to have the orginal stock rom back here's a
recovery by me. It's Android 2.3.3 and 2.3.5.
Make sure you wiped your data your cache and your dalvik before flashing with this tool !!
After flashing just power off your phone from fastboot menu.
Do not reboot! Just power off and power on again!
Android 2.3.3 Version: here
Android 2.3.5 Version: here
Tutorial:
1.Remove and reinsert the battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Press Volume Down and Power to start the device into Bootloader mode.
3.Use the Volume buttons to select up or down. Highlight Fastboot and press the Power button.
4. Connect the device to the computer via a usb cable.
5. Unzip the archive onto your desktop and run flash_stock_rom.bat.
6. Press "j" and confirm your choice with enter.
7. Ignore the fails and wait until the message "Stock Rom geflasht." appears.
8. Unplug your phone from usb.
9. Highlight "Power off" with volume- and volume- and press the power button.
10. Power on your phone and enjoy the orginal Stock rom!
For me it works very stable and smoothly. If it doesn't boot and redirects you to the recovery: wipe data, cache and dalvik again and retry.
Questions please here in this thread and NOT per pn!
Best regards,
Maxi_king_223
Click to expand...
Click to collapse
Hi
May I edit the .bat file and translate the tool to english?

deanokidd95 said:
Hi
May I edit the .bat file and translate the tool to english?
Click to expand...
Click to collapse
if you want to do so
please post the translated file here after finishing.
regards
maxi

I`m getting a E:invalid command argument error every time, already tried with or withoit sd card, and flashing a rom with cwm recovery, using a 2.3.5 version. Help please!

[Q] Help! Accidentally formatted system

Help! I accidentally format/system and format/data on recovery mode. I was trying to cleanout my sdcard to start fresh but i guess i erased "everything." Now i only get the LG logo or Fastboot when i power on my LG E975.
Please help!

Did you make a nandroid backup?
Sent from my HTC One XL using XDA Premium HD app

st3wy said:
Did you make a nandroid backup?
Sent from my HTC One XL using XDA Premium HD app
Click to expand...
Click to collapse
yes i have nandroid backups on my laptop... i also have the kdz updater.. thing is i only get the LG logo or fastboot.

If you have custom recovery send rom.zip using adb.
Rom should be smaller for faster update.
Adb push rom.zip /sdcard/
And wait till finish.
Or goto download mode and use kdz updater and flash any 1gb or less kdz
Sent from my LG-E975 using Tapatalk

atifsh said:
If you have custom recovery send rom.zip using adb.
Rom should be smaller for faster update.
Adb push rom.zip /sdcard/
And wait till finish.
Or goto download mode and use kdz updater and flash any 1gb or less kdz
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Hi atifish. Initially, all i got was the LG logo, but i managed to get into download mode. I tried using the kdz update but i always got a phone not found error. I uninstalled-restarted-reinstalled the LG drivers on my windows 8 laptop but still got the same error. I checked Device Manager and i dont get any LG modem (so i cant disable). All i'd get is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried a windows 7 laptop and was able to disable the LG modem, but the kdz update never finished flashing. I know to ignore the error messages but i had been more than an hour.
**** Just ow i noticed that this link: http://forum.xda-developers.com/showthread.php?t=2010624 indicates that i should select CS Emergency. However on another guide (the one i followed) it said to use Emergency. Was that the reason why i couldn't get a successful kdz update on Windows 7?
Now my LG only goes into Download mode and can't get anything else.
Please help! Im not familiar with the steps to do adb..

using windows 7 laptop with internet working
1: put phone in download mode
2: plug in the phone
3: windows should start installing drivers now, wait for it to finish
4: open kdz updater, put it in emergency/ cs_emergency (iv tested they all work just fine)
5: flash the kdz file which is 1GB or less
if phone boots good but still wipe anyway.
if phone doesn't boot, gets into boot loop, do a wipe using recovery (learn how get into recovery if you dont know, remember if stock recovery you will loose all your files).
NOTE:
if you are on custom recovery and want to retain files/pictures goto recovery first and format system partition and than do all the steps above, no need to wipe this time.
ofcourse you already formatted, this is for future reference, don't get confused.

atifsh said:
using windows 7 laptop with internet working
1: put phone in download mode
2: plug in the phone
3: windows should start installing drivers now, wait for it to finish
4: open kdz updater, put it in emergency/ cs_emergency (iv tested they all work just fine)
5: flash the kdz file which is 1GB or less
if phone boots good but still wipe anyway.
if phone doesn't boot, gets into boot loop, do a wipe using recovery (learn how get into recovery if you dont know, remember if stock recovery you will loose all your files).
NOTE:
if you are on custom recovery and want to retain files/pictures goto recovery first and format system partition and than do all the steps above, no need to wipe this time.
ofcourse you already formatted, this is for future reference, don't get confused.
Click to expand...
Click to collapse
How long does the flash process take? i not sure if im using the proper kdz updater... i have two versions, one with the LGP920.dll and the other with LGP880.dll... neither work for me. Process just stops during updating... and i wait 30-45 minutes.
and do i still use the windows enabler and disable the LG modem?

No dll required, what are you using?
I don't enable windows enabler on win7 but you can. No need to disable anything.
Usually takes 7 8 minutes before phone boots.
Sent from my LG-E975 using Tapatalk

atifsh said:
No dll required, what are you using?
I don't enable windows enabler on win7 but you can. No need to disable anything.
Usually takes 7 8 minutes before phone boots.
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
I waited much much longer than that. Here's the contents of my kdz updater folder:
This is very frustrating.

lkgonzales said:
I waited much much longer than that. Here's the contents of my kdz updater folder:
This is very frustrating.
Click to expand...
Click to collapse
ok use the one with p920.dll
first install the msxml.msi and restart computer.
run as admin kdz_fw_upd.exe
type = 3gqct
phone mode = emergency / cs_emer
load kdz file
launch soft update
cant help you more, busy now office , will see your posts after atleast 6 hours

atifsh said:
ok use the one with p920.dll
first install the msxml.msi and restart computer.
run as admin kdz_fw_upd.exe
type = 3gqct
phone mode = emergency / cs_emer
load kdz file
launch soft update
cant help you more, busy now office , will see your posts after atleast 6 hours
Click to expand...
Click to collapse
Thanks.. If i use LGP920.dll it doesnt work, but if i use the LGP880.dll, it gets further. I missed out on the msxml.msi installation.

lkgonzales said:
Thanks.. If i use LGP920.dll it doesnt work, but if i use the LGP880.dll, it gets further. I missed out on the msxml.msi installation.
Click to expand...
Click to collapse
I got it to work! All that was needed was the msxml installation! Thanks so much!

lkgonzales said:
I got it to work! All that was needed was the msxml installation! Thanks so much!
Click to expand...
Click to collapse
Nice Job. :good:

lkgonzales said:
I got it to work! All that was needed was the msxml installation! Thanks so much!
Click to expand...
Click to collapse
Glad to help
Sometimes small things gives major head aches-
Sent from my GT-P3100 using Tapatalk HD

atifsh said:
Glad to help
Sometimes small things gives major head aches-
Sent from my GT-P3100 using Tapatalk HD
Click to expand...
Click to collapse
Hi,
I think you can help me. If yes, read my problem on the thread below and reply me:
http://forum.xda-developers.com/showthread.php?t=2492105

mansoor3131 said:
Hi,
I think you can help me. If yes, read my problem on the thread below and reply me:
http://forum.xda-developers.com/showthread.php?t=2492105
Click to expand...
Click to collapse
You have few options' but patience necessary,
Option 1
1 download cm10.1.3 for e975
2 download and install notepad++
3 open the rom zip file and double click updater script, it will prompt to open with dialog, choose notepad++ (i use winrar)
4 delete everything above the line that start with mount ....
5 closer winrar it will prompt to save press yes than again yes
6 send this file via adb and flash
Option 2
Get kdzupdater, install msxml.msi restart
Run kdz update as admin and flash e975 10d kdz
Or f180l kdz
http://main.develoid.com:82/lg/Optimus G/F180L10M_00.kdz
Option 3
Requires fast internet
Get lg software update from korean site and flash f180
Sent from my GT-P3100 using Tapatalk HD

You need .net framewrok + msxml for kdz
Sent from my LG-F180K using Tapatalk

How to Root Desire EYE [Simple Guide]

Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!

I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks

pimpsuprazx said:
I flashed the recovery image and it keeps coming up with a little screen with a red triangle,any ideas? thanks
Click to expand...
Click to collapse
Bootloader unlocked?

Can you post a screenshot (PIC) ?

That what happened after flashing the recovery.img and booting into recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

johnyboo said:
That what happened after flashing the recovery.img and booting into recovery:
Click to expand...
Click to collapse
Same problem here.. Really sad.. Was the recovery image working???

jolishj said:
Same problem here.. Really sad.. Was the recovery image working???
Click to expand...
Click to collapse
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?

unforseenenemy said:
Odd that there a few having problems. I s-off'd and had this recovery installed very easily. Are you all still having problems?
Click to expand...
Click to collapse
the same issue here
like the recovery is not compatible

Try using the recovery found here: http://forum.xda-developers.com/desire-eye/development/recovery-twrp-2-8-4-0-htc-desire-eye-t3008442

I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??

karo222 said:
I have rooted my phone, But when I uninstall any system app using system app remover after restarting app will be back, and I can't uninstall them.
What's the problem??
Click to expand...
Click to collapse
System write protection.
There is a mod to disable that here: http://forum.xda-developers.com/des...e-disable-write-protection-v1-0-tool-t2966850
Or use a custom ROM, those have it disabled already.

I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos

I have exactly the same issue

hondalude89 said:
I went through all the necessary steps. Only thing/issue now is the actual flashing of the root file. It will not take. Anyone else have this issue? Is there a way to get the necessary binary or whatever it's asking for? Thank you in advance.
-Carlos
Click to expand...
Click to collapse
Only you have to Download BETA-SuperSU-v2.71-20160331103524.zip and flash it. Issue Solved

I did all the steps and everythign went fine, but then I downloaded a RootChecker app and it says I dont have root access. How can I make sure everything worked? NVM I GOT IT FIXED THANX ALOT FOR THIS POST!!!

Shameera_N said:
Rooting your device may cause loss of warranty.
1. Check your device model - This guide is for HTC Desire Eye and its variants including AT&T Model and International Unlocked Model only.
2. Backup - Backup is mandatory since bootloader unlock will erase your device to factory.
Requirentments- First you should have bootloader unlocked device. (Please visit "http://www.htcdev.com/bootloader" to unlock your bootloader)
Installed ADB Drivers and files - tool can found here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnOVpITTVtcFZUZUk/view?usp=sharing
Download your recovery.img here, link - https://drive.google.com/file/d/0B9SWmcUAdoOnc3hOLXpWVVFIc2c/view?usp=sharing
Super SU & binary here, link - http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip?retrieve_file=1
Put recovery.img to your ADB folder in PC, and super su to your mobile.
3. Now start command line in the ADB folder where your files located in the PC (Right click + hold down Shift) then "Open command window here"
Guide - http://www.tech-recipes.com/rx/232/right-click-to-open-a-command-prompt/
4. Run following commands to flash recovery.img to your device ( this will replace your original recovery)
fastboot flash recovery recovery.img
Simple.. Now reboot into recovery by pressing power+vol down, then select recovery in the loading screen (if you have any issues rebooting into loader screen please try after disable quick boot in power settings).
5. Now flash your Super SU (Zip) transferred to your mobile by selecting in the recovery.
Everything good to go after reboot.....!!!!
Click to expand...
Click to collapse
It is not working on my HTC DESIRE EYE
Error: The code execution cannot proceed because RAPI.DLL was not found.
Troubleshooting steps:
1. Make sure the downloaded file is unzipped
2. USB Debugging enabled
3. On my phone i selected the option, USE USB FOR: "usb file transfer"
4. On my phone I also tried selecting the option, USE USB FOR: "CD Installer"
5. Restart Phone, Mobile and the downloaded file

[Q] Htc desire/bravo A8181 - won't boot ...

Hello and here is my problem ... my battery was low when i was talking to a friend and suddenly the phone powered down. Now it can't boot in ,neither go in recovery. I tried couple of software to restore it but no luck .... I have htc drivers installed and adb is recognizing the phone and my question is is the anybody here who can give me link to my stock rom and stock recovery so i can return the phone in working state please ?
here are some pictures to show the exact model and the other info ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope this info is enough to find my stock rom and stock recovery so i can fix it ,also what software i need to use to recover it ?
I hope someone can give me clear idea how to do it .
Thank you in advance

zhelev81 said:
Hello and here is my problem ... my battery was low when i was talking to a friend and suddenly the phone powered down. Now it can't boot in ,neither go in recovery. I tried couple of software to restore it but no luck .... I have htc drivers installed and adb is recognizing the phone and my question is is the anybody here who can give me link to my stock rom and stock recovery so i can return the phone in working state please ?
here are some pictures to show the exact model and the other info ...
I hope this info is enough to find my stock rom and stock recovery so i can fix it ,also what software i need to use to recover it ?
I hope someone can give me clear idea how to do it .
Thank you in advance
Click to expand...
Click to collapse
Hello. Have you tried flashing the recovery from fastboot? Also, what do you mean, you can't get into recovery? can't you choose the recovery option and select it in the fastboot?

Fobos531 said:
Hello. Have you tried flashing the recovery from fastboot? Also, what do you mean, you can't get into recovery? can't you choose the recovery option and select it in the fastboot?
Click to expand...
Click to collapse
yes mete i know how to do it i mean i know how to go into recovery ,,the thing is the phone doesn't go into the recovery ,,when you press that option in the fastboot it restarts and then it stays forever with the htc logo - which means to me that recovery is corrupted as the system is so i need to flash it again but i dont know which one is for my phone .
Can you give me links what rom i have to download and what recovery so i can fix it ? also what program to flash with ...thats all i need tnx for help

zhelev81 said:
yes mete i know how to do it i mean i know how to go into recovery ,,the thing is the phone doesn't go into the recovery ,,when you press that option in the fastboot it restarts and then it stays forever with the htc logo - which means to me that recovery is corrupted as the system is so i need to flash it again but i dont know which one is for my phone .
Can you give me links what rom i have to download and what recovery so i can fix it ? also what program to flash with ...thats all i need tnx for help
Click to expand...
Click to collapse
Could you please try referring to the first post in this thread seeing if it works(do it thru pb99img method)? http://forum.xda-developers.com/showthread.php?t=1751258

Fobos531 said:
Could you please try referring to the first post in this thread seeing if it works(do it thru pb99img method)? http://forum.xda-developers.com/showthread.php?t=1751258
Click to expand...
Click to collapse
that says i have to be s-off but i am s-on .... how to proceed ? the image doesnt want to load ...

Try the revolutionary method for getting S-OFF http://revolutionary.io

i have downloaded it and it says waiting for the device ,, i have the drivers installed and i am in the fastboot usb ... why it says waiting for device ? windows 8.1 x 64 is my system />?

zhelev81 said:
i have downloaded it and it says waiting for the device ,, i have the drivers installed and i am in the fastboot usb ... why it says waiting for device ? windows 8.1 x 64 is my system />?
Click to expand...
Click to collapse
Windows 8 is the problem, ul need to google the drivers for it, windows 8 is a nightmare with fastboot. If u can get ur hands on a laptop/pc with windows 7/vista etc it would be much easier.

same thing i installed the drivers on win 7 64 bit and it still says waiting for device ... what can be the problem and how to troubleshoot that ?

Make sure to install these drivers as well: http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
Try to do it with these steps:
You'll want to make sure your phone has USB debugging enabled: Menu > Settings > Applications > Development > make sure it's checked
Go to http://revolutionary.io/
Select your operating system (Windows or Linux only at this time)
The download should start right away and you'll be prompted to obtain a beta key (we'll cover this in a sec)
Extract the .zip file
Run the file "revolutionary"
A command prompt should appear and ask you for the beta key (the serial number should appear right next to this)
Go back to the Revolutionary site, select your OS, device, HBOOT version, and enter the serial number from the previous step
Generate the beta key
Copy the beta key over to the command prompt window, press enter, and wait patiently. It took a little bit for the phone to reboot into fastboot and proceeded to reboot fastboot 4 times. On the third time S-OFF was shown.
The command prompt window will then ask if you want to download and install ClockworkMod Recovery, type "y" for yes and press enter
Congratulations, you have an HTC EVO 3D with S-OFF and a custom recovery installed! However, you don't have root yet!
Reboot the phone. It may go through the hands free activation process, but just let it do it's thing.
Follow this link to download a .zip you'll need to obtain root
Transfer it to your SD card
Reboot the phone into recovery
Flash the zip from there, reboot, and you're all done!

mate the phone doesnt boot to the operating system and recovery how can i use that options ... i wrote you that in the very first post .... any other suggestions please ?

zhelev81 said:
mate the phone doesnt boot to the operating system and recovery how can i use that options ... i wrote you that in the very first post .... any other suggestions please ?
Click to expand...
Click to collapse
Try flashing the 2.3 gb upgrade ruu. Its an .exe file so just plug in ur phone in fastboot mode and run the ruu. Thats all i can think of.

i have talked to htc support and they say my phone is asian so what is the correct ruu for me and where do i get it ?

zhelev81 said:
i have talked to htc support and they say my phone is asian so what is the correct ruu for me and where do i get it ?
Click to expand...
Click to collapse
Try "shipped roms"

i tried mate ,,, there is no rom 2.3 for asia ,, please if you know the link just paste it here ... i lost whole day of searching and i am getting kind of nervous ... just paste the link here if you know it ..thnx alot for the help

zhelev81 said:
i tried mate ,,, there is no rom 2.3 for asia ,, please if you know the link just paste it here ... i lost whole day of searching and i am getting kind of nervous ... just paste the link here if you know it ..thnx alot for the help
Click to expand...
Click to collapse
Go on shipped roms and download this one below. Hopefully it will work.
RUU_Bravo_Froyo_hTC_Asia_WWE_2.13.707.1_Radio_32.44.00.32U_5.09.05.30_2_release_143921_signed.exe

i tried this one ..gave me error ...

zhelev81 said:
i tried this one ..gave me error ...
Click to expand...
Click to collapse
What error? I cant guess mate, u need to provide the details. Is ur phone carrier locked? What network provider?

it ends up with this ...
tnx again for your efforts i hope we find this RUU )

jmcclue said:
What error? I cant guess mate, u need to provide the details. Is ur phone carrier locked? What network provider?
Click to expand...
Click to collapse
Isn't the 2.3. Ruu work for all Carrier?
Sent from my HTC Desire S using XDA Free mobile app

[Recovery] TWRP 2.8.7 Materialized Theme (Install from Mi Recovery)

Hi guys, i found this awesome TWRP for our RedMi Note 2.
- Easy rooting included
- OTA update support
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Post: http://en.miui.com/thread-152550-1-1.html
Link to download: http://www.mediafire.com/download/6sf0fsm8vx2o948/twrp287.zip
Instruction
Put the zip file into internal memory, then Install from updater, choose twrp287.zip or u can rename it first as update.zip then install from updater
Hope you guys enjoy it, because i surely do.
Huge thanks to the awesome people behind this :good:

What you mean with "Easy rooting"? I used already but I not found anything related to rooting :/

This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk

I agree. It may look nice but it's sluggish, buggy and is a pain in the butt to unlock its lockscreen. Regular TWRP is a billion times better

jerryshaw12 said:
This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I not used the restore feature so I don't know if working or not, but I trust you

jerryshaw12 said:
This recovery is buggy, i can backup data but can't restore it, also maybe we need official TWRP
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
elaurens said:
I agree. It may look nice but it's sluggish, buggy and is a pain in the butt to unlock its lockscreen. Regular TWRP is a billion times better
Click to expand...
Click to collapse
I used this TWRP about 2 months without any problems, almost on a daily basis.
Countless of backup/restores...
It is necessary only to turn off the screen timeout in settings, like in all versions of TWRP's.

This recovery working normaly with me.

I use this recovery since I've got my phone ( 2 mounths) and it works perfectly ! Backup/Restore works everytime, you can change the unlock method or just disable the time-out... Easy root mean that the recovery see when you have an un-root ROM and when you choose Restart System will ask you to flash SuperSU ( ex: MIUI Stable ROM ).

I use that recovery and backup and restore works fine for me.

Hmm wait, i remember,i had mounted system partition before i restore my backup, mount system partition is buggy if i want to flash / restore something maybe :/
Sent from my Redmi Note 2 using Tapatalk

jerryshaw12 said:
Hmm wait, i remember,i had mounted system partition before i restore my backup, mount system partition is buggy if i want to flash / restore something maybe :/
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
If for other working the restore system I think you have a problem with your device, but now I wanna try, give confirm tomorrow

This is my favorite recovery on my Redmi Note 2.:laugh::laugh::laugh:

I can't extract this recovery through Android Kitchen :/ it says the format using "data"
Sent from my Redmi Note 2 using Tapatalk

Hi,
Followed the instructions but every time I try to install it I get the following error (see picture)
I'm on MIUI Global 7.1.1.0 (LHMMICK) Stable.
What am I doing wrong?

The best way is to flash it using SP Flash ! I've flashed it like this and I never loss my TWRP recovery !

Gyovany96 said:
The best way is to flash it using SP Flash ! I've flashed it like this and I never loss my TWRP recovery !
Click to expand...
Click to collapse
But do I have to unzip the file first to get the scatter file in to SP Flash?

I've used this ( 7.0.8.0 fastboot ). I don't know, maybe they are all the same
Use what you want !

* Mi PC Suite (for the drivers)
* ADB Fastboot Tool
* materialized_twrp287_hermes.img
rename it into recovery.img & move it to ADB Fastboot Directory.
Connect your phone
MSDOS :
Change directory to ADB Fastboot directory
adb reboot fastboot
fastboot flash recovery recovery.img
disconnect & reboot by press power + vol up.
*] front LED holographic keyboard >> another dream in android.

Adam Hui said:
* Mi PC Suite (for the drivers)
* ADB Fastboot Tool
* materialized_twrp287_hermes.img
rename it into recovery.img & move it to ADB Fastboot Directory.
Connect your phone
MSDOS :
Change directory to ADB Fastboot directory
adb reboot fastboot
fastboot flash recovery recovery.img
disconnect & reboot by press power + vol up.
*] front LED holographic keyboard >> another dream in android.
Click to expand...
Click to collapse
Thanks, for the info, but where can I find "materialized_twrp287_hermes.img" there's only a .zip file I can find.
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
Gyovany96 said:
I've used this ( 7.0.8.0 fastboot ). I don't know, maybe they are all the same
Use what you want !
Click to expand...
Click to collapse
Hi, but is only a scatter file. Shouldn't there be more files?

KURT.Beadles said:
Thanks, for the info, but where can I find "materialized_twrp287_hermes.img" there's only a .zip file I can find.
Click to expand...
Click to collapse
Lol....use WinRar, 7Zip or similiar...