Related
HI Guys,
need help....
I can't access the fastboot mode and if I go to the download mode, it says "Secure boot error".
And the windos device manger says, there is a device called "qhsusb_bulk".
Does any has a solution for that ?
Thx
http://forum.xda-developers.com/showthread.php?t=3072091
genevois26 said:
http://forum.xda-developers.com/showthread.php?t=3072091
Click to expand...
Click to collapse
thx for url, i got this error (look at the attachment). and thats the correct port...
jorin93 said:
thx for url, i got this error (look at the attachment). and thats the correct port...
Click to expand...
Click to collapse
if thats your screenshot some things are wrong. for example its G2 chip instead of G3 and restore boot img shouldnt be ticked. emmc test should be.
plus you have to install qualcomm 9008 driver to see whats the correct port.
adikinzor said:
if thats your screenshot some things are wrong. for example its G2 chip instead of G3 and restore boot img shouldnt be ticked. emmc test should be.
plus you have to install qualcomm 9008 driver to see whats the correct port.
Click to expand...
Click to collapse
Thx for ur reply.
I did follow ur correction, still doestn work.
I installed the driver for qualcomm 9008 driver, more ideas ?
jorin93 said:
Thx for ur reply.
I did follow ur correction, still doestn work.
I installed the driver for qualcomm 9008 driver, more ideas ?
Click to expand...
Click to collapse
Look if you have the correct port and the phone it's seen as qualcomm 9008 you must first do AP+EMMC test and when that's completed you ALSO tick SDRAM and press start again.[ dont disconnect the phone no matter how much time it takes to proceed] you have to wait about 5 minutes and then youll be in download mode. then just download LG flash tool and follow a tutorial to go back to stock with TOT files. important: you dont have to tick restore boot img. THIS WORKED FOR MY D855 .
thx for ur screenshots.
But exactly that, what I already did.
jorin93 said:
thx for ur screenshots.
But exactly that, what I already did.
Click to expand...
Click to collapse
what was the result?
adikinzor said:
what was the result?
Click to expand...
Click to collapse
It still says, that the device could be foundet in dload trying flash programmer...
jorin93 said:
It still says, that the device could be foundet in dload trying flash programmer...
Click to expand...
Click to collapse
did you use the board diag posted in this thread http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091 ? It should work i used it 3 hours ago and unbricked mine (d855)
adikinzor said:
did you use the board diag posted in this thread http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091 ? It should work i used it 3 hours ago and unbricked mine (d855)
Click to expand...
Click to collapse
yes, i did see it.
I also have 64x windows, so i did disable and enable the driver...
adikinzor said:
did you use the board diag posted in this thread http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091 ? It should work i used it 3 hours ago and unbricked mine (d855)
Click to expand...
Click to collapse
What OS did you use. I am trying to fix my Verizon G3 and I am getting the failed to load programmer error as well.
agh1701 said:
What OS did you use. I am trying to fix my Verizon G3 and I am getting the failed to load programmer error as well.
Click to expand...
Click to collapse
it was win7 x64 i dont think it really matters. anyways, in the beggining i got that error too but with a different version of that software. 2.99a version was the only one which worked
adikinzor said:
it was win7 x64 i dont think it really matters. anyways, in the beggining i got that error too but with a different version of that software. 2.99a version was the only one which worked
Click to expand...
Click to collapse
Can u send me the url to the .tot file, which u did use?
jorin93 said:
Can u send me the url to the .tot file, which u did use?
Click to expand...
Click to collapse
I used V10E 32g . you can download it using this link http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855+TOTs/
i think this is for verizon http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
adikinzor said:
I used V10E 32g . you can download it using this link http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855+TOTs/
i think this is for verizon http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Click to expand...
Click to collapse
I used http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855+TOTs//LGD855AT-V10e-EUR-16G.zip
because I have the G3 855 16GB.
adikinzor said:
it was win7 x64 i dont think it really matters. anyways, in the beggining i got that error too but with a different version of that software. 2.99a version was the only one which worked
Click to expand...
Click to collapse
I cannot get 2.99a to work on 8.1 or maybe because it's a verizon G3. Won't have access to to a 7 machine until tomorrow.
agh1701 said:
I cannot get 2.99a to work on 8.1 or maybe because it's a verizon G3. Won't have access to to a 7 machine until tomorrow.
Click to expand...
Click to collapse
you could install win7 in virtual machine (vmware) and then try. didnt know that software didnt work on win8
it should work with any model as long as you choose the right tot. our phones have the same chip (8974AC)
adikinzor said:
you could install win7 in virtual machine (vmware) and then try. didnt know that software didnt work on win8
it should work with any model as long as you choose the right tot. our phones have the same chip (8974AC)
Click to expand...
Click to collapse
I could, thanks. I am all ready running hyper-v. Installing vmware might cause problems with my hyper-v machines.
agh1701 said:
I could, thanks. I am all ready running hyper-v. Installing vmware might cause problems with my hyper-v machines.
Click to expand...
Click to collapse
Try and let us know
Sent from my LG-D855 using XDA Free mobile app
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Please anyone give us the solution please help some one repair this via usb cable so there was a solution!!!
But how please can anyone help us
Br
Shahzaib Jahangir
darkdevil15101992 said:
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Click to expand...
Click to collapse
I know on g3 this was considered hard brick had to use wilcrack to reflash bootloader partitions cause the primary gtp is now corrupted for what ever reason g2 and g3 are unbrickable beacause of this i do know u need the tot of the firmware u bricked on have to extract 4 or 5 partitions from said tot. Then flash them to ure phone
Search for g3 hard brick and it can give u a idea just ddont know how compatible it is yet ive done it on g2 and g3 im new to g4
http://forum.xda-developers.com/showthread.php?t=2582142
Ok but on willcracket there was 2nd loader.hex file which was only for msm8974 and 8974AC and our g4 is msm8992 and msm8994
So we badly need msm8992.hex file and rawprogram.xml
And as I see there is some mbn files also sbl1.mbn,sbl1 signed.mbn and more
We need those files for msm8992 please can anyone give us those files so we try it
Br
Shahzaib Jahangir
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Night vampire said:
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Click to expand...
Click to collapse
Hi, do you have a solution?
manuel1496 said:
Hi, do you have a solution?
Click to expand...
Click to collapse
Bro try board diag
bilawal.sarfraz.1 said:
Bro try board diag
Click to expand...
Click to collapse
What's that?
manuel1496 said:
What's that?
Click to expand...
Click to collapse
Bro tell me first that what your pc is show:
1) QHS_USB BULK 9006.
2) QHS_USB BULK 9008.
TELL ME THAT WHICH TYPE OF DEVICE IS SHOWB IN YOUR PCS DEVICE MANAGER WHEN YOU CONNECT YOUR PHONE WITH PC.
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download mode.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
midwayhero said:
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download modus.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
Click to expand...
Click to collapse
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
rlamba said:
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
Click to expand...
Click to collapse
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Try this dump!
It worked for me
dev8987.tiwari said:
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
Click to expand...
Click to collapse
Thanks a lot, I will come back to your offer. Just wanna give the SD-Card solution one chance
-gloim- said:
Try this dump!
It worked for me
Click to expand...
Click to collapse
Thanks, you got a PM
Please helpp needed
Can anyone provide me emmc dump of Z00L
My phone is hardbricked
And i searched a lot on google and i think using emmc dump on sd card phone can be revived
Please help
Its a request
I visited service centre they told display has to be changed
Wtf they are
Please help
I will tell anyone who wants me to help how to get emmc dump
It will not harm ur phone but it can help me to get my phone
I can even pay
addy692 said:
Please helpp needed
Can anyone provide me emmc dump of Z00L
My phone is hardbricked
And i searched a lot on google and i think using emmc dump on sd card phone can be revived
Please help
Its a request
I visited service centre they told display has to be changed
Wtf they are
Please help
I will tell anyone who wants me to help how to get emmc dump
It will not harm ur phone but it can help me to get my phone
I can even pay
Click to expand...
Click to collapse
Can u tell me what u did with your phn so that it get hardbricked.just want to confirm the reason wht actually u did with that
ACFH said:
I dont think you need emmc dump file. In emmc choses "multi download", browser you firmware extract folder. Then click Advance, you can see it can flash boot.img and recocery.img. Then flash you firmware through recovery. Or find the way to convert system.img from firmware and flash it through emmc.
Click to expand...
Click to collapse
Which software to use
I used tool studio but in multi download mode doesn't detect my device
My device only detects in partition download tab
govind1233 said:
Can u tell me what u did with your phn so that it get hardbricked.just want to confirm the reason wht actually u did with that
Click to expand...
Click to collapse
I accidentally flashed the wrong boot image of my secondary phone
After that it doesnt boot up
addy692 said:
I accidentally flashed the wrong boot image of my secondary phone
After that it doesnt boot up
Click to expand...
Click to collapse
ok.is it going to any recovery or fastboot mode
govind1233 said:
ok.is it going to any recovery or fastboot mode
Click to expand...
Click to collapse
No nothing
Only qualcomm 9008 mode
addy692 said:
No nothing
Only qualcomm 9008 mode
Click to expand...
Click to collapse
u need blankflash file.or give me sometime to get a solution fr u
govind1233 said:
u need blankflash file.or give me sometime to get a solution fr u
Click to expand...
Click to collapse
I heard but i dont know how to get blank flash file
If u know how to fix please help me
Contact me at telegram @vaibhav928
Whatsapp 7696361522
ACFH said:
Did you use this tool:
http://www.aryk.tech/2016/12/toolstudio-emmc-download-tool-helps-you.html?m=1
So weird if only partition download can detect your phone. I have no idea
Click to expand...
Click to collapse
Yeah i used this
But doesn't works
If u know please tell
Whats the use if partition download tab ? What files it can flash ?
ACFH said:
Did you use this tool:
http://www.aryk.tech/2016/12/toolstudio-emmc-download-tool-helps-you.html?m=1
So weird if only partition download can detect your phone. I have no idea
Click to expand...
Click to collapse
Hey bro now my device got detected in emmc download but not in multi download
And ij emmc i need first two files ie ram files
Where to get that?
ACFH said:
Never try emmc download. NON-HLOS.BIN is ram file when use multi download. But I dont know about emmc download, it never work with me. You have to find out yourself.
Click to expand...
Click to collapse
Ok thanks
Any suggestions why my device is not detecting in all tabs ?
ACFH said:
Never try emmc download. NON-HLOS.BIN is ram file when use multi download. But I dont know about emmc download, it never work with me. You have to find out yourself.
Click to expand...
Click to collapse
Hello
New update
I have managed to get into fastboot mode
But now when i flash boot or recovery using fastboot
It shows error
Remote partition doesn't exist
Please help
ACFH said:
Never mess up with partition. I've read this but dont know if it work. Maybe you find the way to partition your phone.
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Bro now my devixe is unbricked
I created partitions
But now my imei is null
Any solution for this?
And btw thanks for assisting
Hello all,
I'm currently looking for the file "WW-ZS620KL-80.02.32.7-FAC-for-QMSCT-eng-20180516155727-factory.Zip" to unbrick in 9008 mode with QFIL.
Unfortunately the only working link, to Google drive, is protected and requires access.
If someone has this file (and the firehost programmer as well) and could post links that would be massively appreciated
https://www.androidfilehost.com/?fid=11410963190603889515
I have it
xd.bx said:
Hello all,
I'm currently looking for the file "WW-ZS620KL-80.02.32.7-FAC-for-QMSCT-eng-20180516155727-factory.Zip" to unbrick in 9008 mode with QFIL.
Unfortunately the only working link, to Google drive, is protected and requires access.
If someone has this file (and the firehost programmer as well) and could post links that would be massively appreciated [/QUOTE
Bro i have file in my laptop ,, let me upload on Google drive , will share soon
Click to expand...
Click to collapse
Thanks a lot, guys
xd.bx said:
Hello all,
I'm currently looking for the file "WW-ZS620KL-80.02.32.7-FAC-for-QMSCT-eng-20180516155727-factory.Zip" to unbrick in 9008 mode with QFIL.
Unfortunately the only working link, to Google drive, is protected and requires access.
If someone has this file (and the firehost programmer as well) and could post links that would be massively appreciated
Click to expand...
Click to collapse
Can U put here the manual how unbrick the phone with QFIL in 9008 mode ?
zhuchella said:
Can U put here the manual how unbrick the phone with QFIL in 9008 mode ?
Click to expand...
Click to collapse
Hi, just wanted to ask if you had any progress trying to unbrick using QFIL. If you could help me, would be greatly appreciated.
Thank you.
AmeyDude said:
Hi, just wanted to ask if you had any progress trying to unbrick using QFIL. If you could help me, would be greatly appreciated.
Thank you.
Click to expand...
Click to collapse
I cant help U. I have replaced motherboard in the Asus's service.
zhuchella said:
I cant help U. I have replaced motherboard in the Asus's service.
Click to expand...
Click to collapse
Ohh ok. How much did it cost you, if I may ask?