hey,
I rooted my phone with the low effort method (because of locked BL) and used this image as my pre-rooted image. Everything worked, but now I want to change the navigation bar size/height, it's a bit too small.
I searched the thread, but people say to look at the first post there, which was edited or something, because it doesnt say anything about changing navbar size. It seems in order to change navbar DPI, I need to flash a new navbar using FlashFire? Are there no working Xposed modules to do that? I tried Gravity Box, but that didn't work.
Is it possible to change dpi for navigation bar only using texdroider DPI?
I use the 5.3.3 version of gravitybox (5.3.4 didn't work for me with the longpress-switch audio tracks) and tested, I was able to adjust the height of the navbar easily. I actually shrink mine down to 75% but it should work.
goofball2k said:
I use the 5.3.3 version of gravitybox (5.3.4 didn't work for me with the longpress-switch audio tracks) and tested, I was able to adjust the height of the navbar easily. I actually shrink mine down to 75% but it should work.
Click to expand...
Click to collapse
You used the same pre-rooted image? Version 10e?
If so, maybe I'm doing something wrong in Xposed or Gravity Box. Sry, first time rooted Android :/
Whats the procedure here, exactly? I go to xposed, download Gravity Box, activate it in xposed under "modules", reboot the phone, go into Gravity Box -> navigation bar, activate the main switch at the top and adjust the bar height. Nothing changes, even after a reboot. Am I doing this wrong?
Edit: got it to work. Not sure what the issue was, what I did differently this time was downloading 5.3.3 instead of 5.3.4 and I rebooted a 2nd time after activating the main switch at the top of navigation bar settings.
Yuuseki said:
You used the same pre-rooted image? Version 10e?
If so, maybe I'm doing something wrong in Xposed or Gravity Box. Sry, first time rooted Android :/
Whats the procedure here, exactly? I go to xposed, download Gravity Box, activate it in xposed under "modules", reboot the phone, go into Gravity Box -> navigation bar, activate the main switch at the top and adjust the bar height. Nothing changes, even after a reboot. Am I doing this wrong?
Edit: got it to work. Not sure what the issue was, what I did differently this time was downloading 5.3.3 instead of 5.3.4 and I rebooted a 2nd time after activating the main switch at the top of navigation bar settings.
Click to expand...
Click to collapse
How did you managed to install xposed? I'm using rooted 5.1 v10c version and when trying to install xposed it says to me that xposed is not compatible with android sdk version 22 or my processor architecture. What can I do?
galshalev said:
How did you managed to install xposed? I'm using rooted 5.1 v10c version and when trying to install xposed it says to me that xposed is not compatible with android sdk version 22 or my processor architecture. What can I do?
Click to expand...
Click to collapse
You are trying to install Xposed, not the XposedInstaller.apk, right? I dont really know what this error is, but it sounds like you are missing the actual Xposed framework on your phone. You have to install the framework first, then the installer.apk.
I followed this guide:
joined the beta group, downloaded FlashFire from Google Play store (it says it can take up to several hours until the link works for you, I just had to refresh and it worked after a few seconds)
downloaded the xposed-v79-sdk22-arm64.zip and XposedInstaller.apk, put them both in a folder on external SD (can be placed anywhere on the phone)
installed Xposed using FlashFire
after phone rebooted, installed XposedInstaller.apk and I was done.
edit: I should also mention Im on 10e, but that's hardly the issue. Im sure it works on 10c also. If not, you could flash a new firmware (10e) on it, you will lose root though and will have to redo it. Xposed is powerful and root is not the same without it, in my opinion, so I would really want to have it.
Short guide what you could do:
flash 10e using this guide (I used the Poland H81510e KDZ)
download this pre-rooted 10e image
follow the low effort guide and use the dd command from the 10e image
Yuuseki said:
You are trying to install Xposed, not the XposedInstaller.apk, right? I dont really know what this error is, but it sounds like you are missing the actual Xposed framework on your phone. You have to install the framework first, then the installer.apk.
I followed this guide:
joined the beta group, downloaded FlashFire from Google Play store (it says it can take up to several hours until the link works for you, I just had to refresh and it worked after a few seconds)
downloaded the xposed-v79-sdk22-arm64.zip and XposedInstaller.apk, put them both in a folder on external SD (can be placed anywhere on the phone)
installed Xposed using FlashFire
after phone rebooted, installed XposedInstaller.apk and I was done.
edit: I should also mention Im on 10e, but that's hardly the issue. Im sure it works on 10c also. If not, you could flash a new firmware (10e) on it, you will lose root though and will have to redo it. Xposed is powerful and root is not the same without it, in my opinion, so I would really want to have it.
Short guide what you could do:
flash 10e using this guide (I used the Poland H81510e KDZ)
download this pre-rooted 10e image
follow the low effort guide and use the dd command from the 10e image
Click to expand...
Click to collapse
Wow, thanks for the great help!
Any way to change dpi of nav bar in the build.prop?
Related
Greetings all..
I am working on the Not e 4 and run a large collection of Xposed mods
I have a Sprint Note 2, Note 3 and Note 4 and the 2&3 have never given me any issues with Xposed Framework Modules.
The frame work
Several are causing boot loops upon reboot.
The device will not boot into safemode- which is a huge pain if you did not do a backup in recovery.
I just wanted to remind everyone that if you install Xposed ( and ignore all of the "make sure you nandroid/ backup first messages) this time REALLY MAKE SURE YOU BACK UP /System at least before you activate mods.
I will post a list of the ones giving me issues shortly as I work out process of elimination.
Do you have an idea why my phone says "updating" after I install Xposed?
It's not stuck or anything but in the status bar it has a logo with a checkmark and I have no service. Am I supposed to freeze something?
I don't use many xposed modules and don't have boot loop issues with the ones I use. My problem is not all options in Wanam works. Like disabling sound waning when putting the volume too high. Hopefully the Wanam devs will fix that.
gfp11289 said:
Do you have an idea why my phone says "updating" after I install Xposed?
It's not stuck or anything but in the status bar it has a logo with a checkmark and I have no service. Am I supposed to freeze something?
Click to expand...
Click to collapse
If you turn off Software Updates from the ApplicationsManager you wont see it anymore.
xxSTARBUCKSxx said:
If you turn off Software Updates from the ApplicationsManager you wont see it anymore.
Click to expand...
Click to collapse
I turned off Software Uodates and it still comes up in the notification bar
I don't get any service either upon installing and restarting with xposed
When you installed xposed installer (assuming this was not from a titanium backup), it should have saved a zip file called, Xposed-Disabler-Recovery.zip to your sdcard or internal memory.
Install it in recovery and it will disable xposed framework so you can figure out which module is not working.
Here's a link:
http://www.datafilehost.com/d/ccb18d00
Deleted. Thanks. ^^^^^^^^
hermeticist said:
When you installed xposed installer (assuming this was not from a titanium backup), it should have saved a zip file called, Xposed-Disabler-Recovery.zip to your sdcard or internal memory.
Install it in recovery and it will disable xposed framework so you can figure out which module is not working.
Here's a link:
http://www.datafilehost.com/d/ccb18d00
Click to expand...
Click to collapse
I'll try it when I get home
I just install this in TWRP?
gfp11289 said:
I'll try it when I get home
I just install this in TWRP?
Click to expand...
Click to collapse
Yes. It removes xposed framework without uninstalling anything.
This way you can use the process of elimination add to which xposed module is screwing up your system:
Reinstall framework, turn one module on at a time, reboot, repeat.
If you are sure individual modules are not messing up, don't bother turning them off.
hermeticist said:
Yes. It removes xposed framework without uninstalling anything.
This way you can use the process of elimination add to which xposed module is screwing up your system:
Reinstall framework, turn one module on at a time, reboot, repeat.
If you are sure individual modules are not messing up, don't bother turning them off.
Click to expand...
Click to collapse
The thing is that I didn't have any modules on. I just installed it, updated it, rebooted, and I'm stuck with no service until after I uninstall it
Weird
Maybe I could try to flash Xposed in TWRP? If that's even possible..
gfp11289 said:
Maybe I could try to flash Xposed in TWRP? If that's even possible..
Click to expand...
Click to collapse
All you have to do is install the apk. Then once in Xposed, install the framework.
Id try uninstalling the framework, deleting the apk and download a fresh apk of xposed and start fresh. Dont associate TWRP with installing Xposed.
I think its working now. For some reason the update stays on my status bar for awhile before it turns off by itself. I tried to send myself some text messages last night and they took a long time to send, or just never sent at all. I have some decent status by my house so that wasn't an issue. I might've not given my phone enough time to boot up xposed or something, but regardless it's working now.
Being connected to wifi, does in anyway affect sending text messages while I'm on xposed? I barely had enough time to test it out when I was at home but driving around my city I was sending myself text messages and they seemed to go through okay.
Wanam Xposed
11/5/14 Wanam Xposed Module update available.
Drama!!! It is just Xposed Framework.
http://forum.xda-developers.com/showthread.php?t=3074586
I had been using it for the last 2 days with out any problems.
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
jasonlee0315 said:
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
Click to expand...
Click to collapse
I was running it on ARHD but got some weird ram overflow..
It just stacked my 3GB completely full untill the phone became unresponsive so I had to restore a nandroid to fix it..
Weird issue, it might have been one of the modules..
Just waiting till official 64bit version comes out I think...
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
blocka said:
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
Click to expand...
Click to collapse
If you are using 5.1 can find all info here, If you want to use Install xposed-v70-sdk22-arm64-by-romracer-20150808.zip is what you need and you can get the APK here
If using 5.0.2 use link in OP
thanks liam_davenport
I've been looking for a guide or instructions on how to recover from a boot loop but haven't been to successful in finding anything worthwhile. So wanted to ask here, if it does happen (not that it will) I just want to cover my bases and know beforehand how to recover from a boot loop. Obviously part of the recovery process would be to have taken a NAN backup prior to installing the xposed framework, to recover it's a process of booting into recovery and restoring the NAND?
Really looking forward to getting this on my phone.
Thanks guys.
There is an uninstaller zip available, flash it when you experience a bootloop ( http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 ) . Otherwise just flash your rom new, that works as well. Then deactivate all your modules and start reactivating them one by one, you might have an incompatible module running,, which causes it
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
neverborn said:
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Did you activate the module?
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
neverborn said:
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
Click to expand...
Click to collapse
It does work with rooted stock 5.1 s-on though. Sometimes it requires the 2 button reboot. It occasionally sticks at the splash screen but not often. I have used Greenify, Sense Toolbox for Sense 6 and 7 (which has lots of cool features like 12 mini quick toggles and status bar and notification hiding), Always Correct for password memory on my keyboard, YouTube Ad Away, X Hangouts which allows custom theming and features and YouTube Background Playback.. All working great here with the Romracer sdk22 arm64 5.1 framework zip and Xposed Installer 3.0 alpha 4
Sent from my M9 using Xparent Gray Tapatalk 2
Thanks for letting me know. On the other hand, i can stick with ARHD as it's been so stable so far.
Sent from my HTC One M9 using Tapatalk
There is an official 5.1 x64 version now..
oemfoefoee said:
There is an official 5.1 x64 version now..
Click to expand...
Click to collapse
True that, just flashed...first boot was not successful or maybe I wasn't patient enough but the second boot went fine..all working great.
I've installed the latest (v73) official xposed for android 5.1 over romracer's unofficial one and didn't have any issues. First boot, all good! All modules works great..
Same here all works fine
Powered by SkyDragon ROM
Ask working here in Leedroid with screen off animation and gfe
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Veraster said:
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Click to expand...
Click to collapse
Did you enable the module? Go to Xposed app - Modules - Click the tick boxes - Reboot
Yeah the modules were already enabled. I ended up finding what was causing the problem. I had to go into Super SU and change default access to "Grant" and checked the "Enable su during boot" box. That finally made it work.
Hello,
Can i install xposed on Fire Phone without getting a soft-brick?
Thanks,
mentolado said:
Hello,
Can i install xposed on Fire Phone without getting a soft-brick?
Thanks,
Click to expand...
Click to collapse
Yes you canif your rooted. I have it installed after following the KingRoot and SuperSu threads.
What does it do??
System tweaks.
Like??
I'm using module which defaults dialer instead call log in phone app. I didn't find anything else that suits me.
chalx said:
I'm using module which defaults dialer instead call log in phone app. I didn't find anything else that suits me.
Click to expand...
Click to collapse
U need a module for that?? Isn't that the default behavior (it certainly is on mine)?
StygiAn TrepidAtioN said:
U need a module for that?? Isn't that the default behavior (it certainly is on mine)?
Click to expand...
Click to collapse
Mine also opens to dialer not history. As far modules go I'm using the XHangout, Xposed GEL Settings, and WiFiKeyView modules right now. XHangouts to change the hangouts theme color to match my setup.Used Xposed GEL to remove the white google search bar, from my Google Now Launcher Home screen(FYI i have setup that it will still open if you say "OK Google"), and Wifikeyview to see my saved passwords. It did add an option to copy password need to check that one again. If i install anymore ill update.
I installed Amplify + Greenify to conserve battery and it works fine.
Anyone tried GravityBox KK module for Xposed?
RainGater said:
I installed Amplify + Greenify to conserve battery and it works fine.
Anyone tried GravityBox KK module for Xposed?
Click to expand...
Click to collapse
Okay, I Installed GravityBox (KK) to test it out and it works!
Anybody install busy box?
Yes.
GB KK is working. But for Status Bar Icons you need Xstana.
Any way to remove the network name (T-Mobile) in the status bar? GB Kk doesn't have that option to hide the network name in status bar.
I installed this and hdxposed thinking it would stop Amazon ota but I just got notification that kindle has been updated. So does hdxposed only block firmware updates, or is it broken altogether on fire phone?
I have installed xposed installer on my fire phone and it is rooted but when I open xposed installer framework it can't be install and uninstall please help
I recently rooted my N900T using CF root, and all went well. Now I would like to install the Xposed framework, and have no clue which file to install, as I have found dozens of them, as well as reading there are different instructions on Samsung.
This phone has a stock rom, running 5.0 and I'd rather leave it that way. I've heard about using either Odin or Flashfire to flash the xposed framework, then just installing the APK, but once again, which file out of the dozens out there is for this device?
My main reasons are ad blocking, and to disable the idiotic headphone warning (since I can't strangle the developer of that screw up, heh heh) I use xposed on my old Nexus 7 and love it, and afaik, it was easy to put it on there.
I have searched, but either didn't find what I was sure applied to my device, or didn't find it, so sorry if it's already out there.
Thanks for any help!
my understanding is that to install xposed on a touchwiz ROM (samsung's rom), it needs to be deodex-ed
(see first post here: http://forum.xda-developers.com/not...m-stock-lollipop-5-0-n900tuvufob6-v1-t3215571 )
look for deodex for instructions. Then the thread I linked should have the correct links to xposed install.
If you use an AOSP rom, you can install directly (no deode step required).
frenchy2k1 said:
my understanding is that to install xposed on a touchwiz ROM (samsung's rom), it needs to be deodex-ed
(see first post here: http://forum.xda-developers.com/not...m-stock-lollipop-5-0-n900tuvufob6-v1-t3215571 )
look for deodex for instructions. Then the thread I linked should have the correct links to xposed install.
If you use an AOSP rom, you can install directly (no deode step required).
Click to expand...
Click to collapse
Thanks for the info, about to give it a try.
SUCCESS! The file I was trying to flash was the wrong one, apparently. was trying to flash xposed-v75-sdk21-arm-arter97-snapdragon.zip, but I needed the V71 version instead.
v85 by dkcldark works without needing to deodex your ROM.
http://forum.xda-developers.com/xpo...g-lollipop-t3113463/post65373013#post65373013
I am currently using this on rooted stock FOL1 knox 0x0 flashed using FlashFire.
Interesting. As this phone was given to me, and is over 3 years old, I could care less about knox or warranties, but still nice to know it can be done. The only problem I had was the touchwiz launcher deciding to just stop working, and getting those idiotic prompts "unfortunately touchwiz home has stopped, if this inconveniences you, too bad". I fixed that by ditching touchwiz home and going with Nova launcher, which I like better anyway. I also like that this phone has an IR blaster, which has led to fun with random TV's!
I hope its ok to ask my question here in this recent thread. I'm messed up with xposed I think. I had xposed installed and working while on the NK3 firmware. I don't do a lot of updates to my device very often, but decided it was finally time to move to 5.0. So I downloaded FOB6, got it flashed, rooted, twrp installed, sd card fix. I totally missed the part where I should have disabled or removed xposed before I upgraded. Now I seem to be stuck. Can't quite figure out how to remove the old version and install newer version. I tried downloading from the post by dkcldark ref'd above. I installed using flashfire (first time using that), but it seems I still have the same older version still showing when I run the app.
If all else fails I guess I'll make a backup and factory reset, but I'm hoping there is an easier way. Thanks in advance for any ideas.
https://www.google.com/amp/s/forum....ed/unofficial-systemless-xposed-t3388268/amp/
The thing is.... I went to the app to get the program and Magisk wouldn't install the program on it's end. Took a shot and installed the apk (SDK 25), then installed the 88.1 version shown in the picture (now 88.2) rebooted and waited to "upgrade" itself.... But here it is plain as day. I'm not saying you may get it running on yours but it worked for me. Happy testing y'all,
SykkNyzz
And apparently Gravity Box for Nougat just came out 2 days ago at the time of this post.
Just ticked to center the time. Perfecto.
Reboot and such work as well
Nav Bar as well (note swapped buttons and added menu)
Even the Expanded Desktop works.
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
madbat99 said:
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
Click to expand...
Click to collapse
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
SykkNyzz said:
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
Click to expand...
Click to collapse
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
madbat99 said:
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
Click to expand...
Click to collapse
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
SykkNyzz said:
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
Click to expand...
Click to collapse
I can't get any magisk modules to work either, I was genuinely hoping you had it here. I've noticed you're pretty active in the forums for this phone.
Glad you showed xposed working, it helped me decide to try it.