Develop Bugs

[Q] Htc One x Bricked :'( :'( HELP !!!

i own an htc one x (international version ) (Tegra 3 ) ..and after reading some interesting articles about installing custom roms on the one x , i rooted it and put some rom , it was working perfectly , but i was not satisfied with the rom , so i downloaded a new rom and put it on the phone and installed the rom (some nexus rom) ... i booted the phone and it was stuck on the nexus logo and nothing else would happen , so i read some articles on the internet , one of them told me to reset the phone to factory setting , after doing that i've lost CWM Recovery , now all i can do is, get to Hboot or something like that., aND all i can see here is fastboot and recovery...(recovery crashes .. if i select recovery it shows me a htc logo and then it comes back to the bootloader :'( .... ) .. , I've tried everything , but it just wont work , i'm a noob , please help me fix my phone up ! here are a few details about my phone -
Endeavoru Pvt Ship S-ON RL
Hboot-1.36.0000
CPDL-none
Microp-None
Radio-5.1204.162.29
eMMc-bootmode-disabled
cpu-bootmode-disabled
modem path - off
it was on Jb before i changed my rom .. and if i send any file to the phone it gives me errors like -
writing "recovery.img"
Failed (remote:not allowed) ..
my version mian is 3.14.720.24

Flash your RUU and start then follow this guide.
http://forum.xda-developers.com/showthread.php?t=1832891

If you can access hboot menu then your HOX is NOT bricked,you can try the JB unroot/reroot/flashing tool with one click on your computer

can you , expain to me in detail , i dont know to to flash ruu and stuff :'(

Why opening a new thread again ! :banghead:

Use one of these toolkits to start all the process:
http://forum.xda-developers.com/showthread.php?p=24972527
http://forum.xda-developers.com/showthread.php?t=1924003

But None Of them seem to work , i keep getting this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

But None Of them seem to work , i keep getting this error
[/QUOTE]

vigneshsherlekar said:
But None Of them seem to work , i keep getting this error
Click to expand...
Click to collapse
Try to flash the recovery.img using the command prompt:
fastboot flash recovery recovery.img

it tells me that the recovery is writing and then i get this error that says <remote:not allowed>

vigneshsherlekar said:
it tells me that the recovery is writing and then i get this error that says <remote:not allowed>
Click to expand...
Click to collapse
Do u have adb drives installed on your pc?

Please unlock the bootloader !
Sent from my GT-P5110 using xda app-developers app

i cant unlock the bootloder in this condition ! if not tell me how t odo it and yeah i didnt have adb drivers on my pc ,.. i just installed it !

Let me make 1 thing very clear to you :
We are not here to SPOONFEED you ! If you search (yes there is a button for that) you find a lot of helpfull things
I suggest you go to the htcdev site and unlock it.

i'm sorry!! i unlocked the bootloader

Then read up here
http://forum.xda-developers.com/showthread.php?t=1832891
Then rename the recovery you want to flash just to
Recovery.img and flash it again.
And some more info here
http://forum.xda-developers.com/showthread.php?t=1604439
Its not that difficult but please for GOD's sake stay in one thread.....

Huawei G510 - Solved - Cannot connect to the camera

This document shows how solve problem "cannot connect to the camera" after ROOT Huawei G510-0010 with B165 boot.img.
1 - Requeriments:
- Download Google adb-toolkit - http://www.adbtoolkit.com/
- Download boot.img, better if you use same version of your firmware (mine is B182)
You can find firmware version on Settings -> About Phone
http://www.toplinetec.com.br/pub/other/boot_g510_B182.zip
2 - Connection with PC
- Install ADB drivers for your device on PC.
- On device, disable Settings -> Fast Boot
- Turn off device, wait some seconds, turn on again pushing volume down and start button for 10 seconds and connect to USB.
- Unzip files to C:\, go Windows Prompt (CMD), and follow next commands:
- cd\adb-toolkit\bin\files
- fastboot devices (if return a code in next line, is because your device is connected)
- fastboot flash boot c:\boot.img
- fastboot reboot
The whole process should look something like this in your CMD:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
References:
http://forum.xda-developers.com/showthread.php?t=1752270
http://forum.xda-developers.com/showthread.php?t=2315932

Issue on Install Boot
Hi, thanks for your post.
i followed all steps, but, when i install the boot.img to my device it returns me this:
sending 'boot': OK
writing 'boot': Failed (remote: command not allowed)
Do you know, by chance, why is it failing?
Thank you very mutch.

re: Issue on Install Boot
MosKRt said:
Hi, thanks for your post.
i followed all steps, but, when i install the boot.img to my device it returns me this:
sending 'boot': OK
writing 'boot': Failed (remote: command not allowed)
Do you know, by chance, why is it failing?
Thank you very mutch.
Click to expand...
Click to collapse
I don't know exactly, but did you ulnlock boot loader before ?
Is a good option to start.
Follow these steps:
1 - See entire model behind phone battery: G510- (0010, 0100 or 0200).
2 - Request unlock code for Huawei
huaweidevice.com/worldwide/servicePolicy.do?method=toApplyUnlock
If you phone is 0010, you'll need to find chinese site for this.
3 - Apply code
huaweidevice.com/worldwide/servicePolicy.do?method=getUnlockStep
PS: put www before links, because I can't post.

Solved
Hi again!
Yes you was right, the problem was that i didnt unlock the boot loader. I found some problems for do that.
The problem was that they don't have the 0010 model listed in their site and, a chinese site for ask it dosen't exists (I've gone crazy looking for it :crying: :crying
I had to send an email directly to Huawei support channel whit the mobile data (IMEI, S/N, model, ...). They answered me in 48h more or less with the unlock code.
And after that all was perfect. :highfive: :highfive:
shalonbr said:
I don't know exactly, but did you ulnlock boot loader before ?
Is a good option to start.
Follow these steps:
1 - See entire model behind phone battery: G510- (0010, 0100 or 0200).
2 - Request unlock code for Huawei
huaweidevice.com/worldwide/servicePolicy.do?method=toApplyUnlock
If you phone is 0010, you'll need to find chinese site for this.
3 - Apply code
huaweidevice.com/worldwide/servicePolicy.do?method=getUnlockStep
PS: put www before links, because I can't post.
Click to expand...
Click to collapse

Link not working ...
cany anyone upload
..

[Q] E975 Hard-Brick!

1 month is that I'm looking for a solution .
My LG E975 turns on, shows the Google logo with a padlock open , then goes into the recovery menu without a chance to get out and start the os . I have tried using adb push command but with the device is not recognized ( can not find it ) . The phone goes into download mode. I've tried using this guide : http://forum.xda-developers.com/showthread.php?t=2388440
but it gives me an error , or this :
10:46:41 : 1 - Normal connect success
10:46:41 : 2 - Emergency connect success
10:46:41 : Phone Mode (1)
10:46:41 : ***** Start GetPhoneType *****
10:46:41 : You can not continue the upgrade to two errors. \ NFollow the order : (1 ) Separate the USB cable and battery from the phone , and (2 ) Connect the battery ; \ n (3 ) Connect the USB cable to the phone . \ n ( 4) Press the power button on the phone for 3 ~ 5 seconds. When the phone is on , \ npress the ' [ Restart] ' button for upgrade. \ NGo to LG Mobile home and read notices about upgrades . \ Nto finish the upgrade, press the ' Finish ' button. ( _CheckPhoneType () Error)
10:46:41 : ! PUpgrade -> StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
10:46:41 : Page_Error º Î º ÐÀÔ'Ï'Ù
10:46:41 : ¿ © ± Ã, Â Retry º Î º ÐÀÔ'Ï'Ù
10:46:41 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
I would like to know if the phone is to be thrown away or you can do something , I also sent a technician who in turn failed.
thanks
Goodbye!
Photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try adb sideload from CWM

your phone is still good, just flash using adb sideload with any custom rom

Nite.Achilles said:
Try adb sideload from CWM
Click to expand...
Click to collapse
mathprav said:
your phone is still good, just flash using adb sideload with any custom rom
Click to expand...
Click to collapse
adb does not detect the device, I activated the sideload from the recovery menu, it may be that debugging is disabled.
how can I?

nobody knows how to do?

Got similar problems, I was not able to load firmware with lg tool indicated in the guide you posted.
I solved it perfectly making an usb 910k cable:
http://forum.xda-developers.com/showthread.php?t=2069564
Once you got the cable:
- turn off phone
- plug usb cable to phone
- plug the other end of the cable to the PC, phone turns on and initializes upload mode
- launch "KDZ_FW_UPD.exe", select the kdz file for your phone (downloaded with lg original firmware utility), select "EMERGENCY" as phone mode and start update
Phone restored to stock firmware. :laugh:

LGPNST first before adb push. HTH
Sent from my LG Optimus G using xda app-developers app

SquizzyGm said:
nobody knows how to do?
Click to expand...
Click to collapse
if adb is not detected check computer -devices and make sure that correct driver is selected

LG Flash Tool error ls980

Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

taksi02 said:
Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
Click to expand...
Click to collapse
Is there no one to help

your phone is originally an LS980 (sprint) converted into d802 , u surely flashed a wronge files but
i think u need to shortcut the 2 capacitors
just remove the buttons connector ,then that metalic plat that its glued in just to get access tothe ic chip and motherboard , of course to do this u need to takr off the baterry and all connectors, once u takr off yhe buttons reconnect every connwctor except the one of buttons and baterry
Thrn connect the the phone to the pc by using a usb (without baterry) then u need a liyyle screw driver or a wire to short the capacitor c5000 and c5004, keep trying till u heard thr pc detect new device named qhusb
Great , for that you need to download srk tool 2.1 just google it
Then selectfix utility then unbrick qhusb and select the correct drive
It will flash : haf, boot , aboot
Thats good for now ur download mode is back to life
Then for ls980 u need to install stock tot file (ls890zv7.tot) flash it with lg flash tool use manual mode u need a dll file (lgls980_20130904_lgflashv151.dll) download it on google... i ll send you links later hiw to do this,im using my phone
Once finished , ur phone is back to life but no signal
Easy ,just need to root. Then install twrp recovery
After that u need to install via recovery mode the (ls980stockuniversal to d802.zip)
And u re phone is getting signal and being fixed
edit: here the tutorial links that helps ya how to do everything
1- to get your phone alive ( to be detected as qusb_bulk)
http://forum.xda-developers.com/lg-g...brick-t2904404
2- this to fix the qusb issue & download mode back to life
https://www.youtube.com/watch?v=ERZvlJIC9dE
3- to install the stock tot rom , Root , then install twrp recovery mode , & then full unlock you cell phone
https://www.youtube.com/watch?v=FGQ2aGlumWs
http://forum.xda-developers.com/spri...m-att-t3188248

Hi Folks,i have this problem.
Can someone help please ?

aSpirit81 said:
Hi Folks,i have this problem.
Can someone help please ?
Click to expand...
Click to collapse
you need to read about cross dll , you need to edit TOT file to flash Phone

Yes,i read that,but many people complain on other errors after that..bin file erorr for example....

How to succesfully edit tot file ? Ls 980 got 5 d802 got 4 caracters...
Sent from my SM-G900F using Tapatalk

[Q] I can't root my xiaomi redmi note 8 pro

Hi, i have a xiaomi redmi note 8 pro (64gb), with the bootloader unlocked, MIUI 12.5.7 global, debug enabled
Using Google Platform-Tools, after entering fastboot (with "adb reboot bootloader") and flashing the twrp recovery (with "fastboot flash recovery twrp.img") I cannot enter the custom recovery, whether I use the combination of button, whether you use the command "fasbtoot boot recovery/twrp.img"
I tried to change the USB port of the PC but I always get the same error: FAILED (Status read failed (Too many links))
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does anyone know how to fix this error? I don't mind having to format the phone.

Have you tried this ?
Write to device failed (no link / unknown error / too many links) - Sample Code and Directory of libraries for Android Developers - AndroidHiro.com
Write to device failed (no link / unknown error / too many links).I am trying to flash twrp to my ZTE Axon 7 but until now I just keep getting errors every time I try to flash something.Device is already wiped and bootloader unlocked.I am in fastboot mode, I also get some unknown error in...
androidhiro.com

Fytdyh said:
Have you tried this ?
Write to device failed (no link / unknown error / too many links) - Sample Code and Directory of libraries for Android Developers - AndroidHiro.com
Write to device failed (no link / unknown error / too many links).I am trying to flash twrp to my ZTE Axon 7 but until now I just keep getting errors every time I try to flash something.Device is already wiped and bootloader unlocked.I am in fastboot mode, I also get some unknown error in...
androidhiro.com
Click to expand...
Click to collapse
Soo should i use a USB hub?
Because I have already tried to use the method that modifies the registry but it didn't help

umbi027 said:
Soo should i use a USB hub?
Because I have already tried to use the method that modifies the registry but it didn't help
Click to expand...
Click to collapse
Have you tried uninstall ing your device existing drivers, shutting down and turning on you computer and reconnecting your phone again ? This can work in some cases

Fytdyh said:
Have you tried uninstall ing your device existing drivers, shutting down and turning on you computer and reconnecting your phone again ? This can work in some cases
Click to expand...
Click to collapse
I tried and it didn't work, but I tried to install a different recobery (so not the twrp) and it worked
thanks so much, for the help anyway

umbi027 said:
I tried and it didn't work, but I tried to install a different recobery (so not the twrp) and it worked
thanks so much, for the help anyway
Click to expand...
Click to collapse
What recovery have you used that works?

Lucz0xxZ said:
What recovery have you used that works?
Click to expand...
Click to collapse
I followed this tutorial:
I followed the tutorial until the custom recovery was installed and then I used the latest version of magisk downloaded from the official GitHub

umbi027 said:
I followed this tutorial:
I followed the tutorial until the custom recovery was installed and then I used the latest version of magisk downloaded from the official GitHub
Click to expand...
Click to collapse
Thanks!