I try to root my P8000 but I have a problem... In SPFlashTool all is ok... I put SPFT on Download Mode, I connect my phone... And all is installed ok.
But when I go to Recovery Mode... The phone restart and boot normally.
I don't know why that.
HELP PLEASE!! [emoji21] [emoji29]
Enviado desde mi Elephone P8000 mediante Tapatalk
iprogramation said:
I try to root my P8000 but I have a problem... In SPFlashTool all is ok... I put SPFT on Download Mode, I connect my phone... And all is installed ok.
But when I go to Recovery Mode... The phone restart and boot normally.
I don't know why that.
HELP PLEASE!! [emoji21] [emoji29]
Enviado desde mi Elephone P8000 mediante Tapatalk
Click to expand...
Click to collapse
Try using philz touch recovery, since the 12/03 build this is the only recovery that has worked for me. Then to root just flash SuperSU 2.46 zip
Yes, but how i install it... Better, how you install it?
Enviado desde mi Elephone P8000 mediante Tapatalk
With philz recovery just load the scatter file with spft like before. Instructions are in the link.
http://forum.xda-developers.com/ele...covery-philz-touch-6-59-0-port-p8000-t3224478
Look, i have the scatter with an recovery.img... I think is cwm, but, i use the same scatter but different recovery?
Enviado desde mi Elephone P8000 mediante Tapatalk
iprogramation said:
Look, i have the scatter with an recovery.img... I think is cwm, but, i use the same scatter but different recovery?
Enviado desde mi Elephone P8000 mediante Tapatalk
Click to expand...
Click to collapse
No, use the scatter file that comes in the philz recovery download. Once you unzip the file you will have the scatter file.
Yes, thx a lot... I've finally rooted my Phone!!! Thx a lot...
Enviado desde mi Elephone P8000 mediante Tapatalk
Thank you so much ! that's five hours I was trying to root the P8000 and then that's it, thanks to this post! Thank you ! !
can we flash philz recovery without root? otherwise this topic hasnt been answwered
kingofswords said:
can we flash philz recovery without root? otherwise this topic hasnt been answwered
Click to expand...
Click to collapse
Yes, phillz recovery will not root your phone on its own. If you look at my above comment I state you will then need to flash the supersu 2.46 zip file for root.
Related
Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Ras1992 said:
Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Click to expand...
Click to collapse
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Ras1992 said:
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Click to expand...
Click to collapse
Open odin
Download and unzip the firmware
Put it on AP button
Flash it
Firmwares(4.2.2 don' t work)
http://www.androidgalaxys.net/aggiornamento-galaxy-s4-mini-i9195/
Inviato dal mio GT-I9195 utilizzando Tapatalk
do you resolve problem?
refer to the title...
I need to reflash twrp on my OP3, its been giving me buggy installs, however I don't know how... Any help would be appricated
via adb maybe ? that what i would do.
Playa82 said:
via adb maybe ? that what i would do.
Click to expand...
Click to collapse
So just dirty flash over current?
Yes. Im not a specialist like others here, but i would do that. I think you cant do somwthing wrong. Thats almost the same when you update it
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
SynaTech said:
refer to the title...
I need to reflash twrp on my OP3, its been giving me buggy installs, however I don't know how... Any help would be appricated
Click to expand...
Click to collapse
With adb in fastboot (bootloader) mode:
Code:
fastboot flash recovery TWRP.img
Code:
fastboot reboot recovery
Or in TWRP select images under install and flash your TWRP.img
C2H5OHinfused said:
With adb in fastboot (bootloader) mode:
Or in TWRP select images under install and flash your TWRP.img
Click to expand...
Click to collapse
So I can just dirty flash over my current twrp?
SynaTech said:
So I can just dirty flash over my current twrp?
Click to expand...
Click to collapse
Yes
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
SynaTech said:
So I can just dirty flash over my current twrp?
Click to expand...
Click to collapse
Yup
Sweet, it's done... I was afraid that I was gonna mess up something by dirty flashing over current, but it works great!
Next time ask isolated questions in Q&A section, this is not dev related.
For future updates and stuff like that you can flash TWRP by using flashify. Tested on my OP3 and it works.
http://forum.xda-developers.com/showthread.php?t=2349847
Can I flash it with Odin instead of ADB? Thanks!
Using a Samsung
XenRon said:
Can I flash it with Odin instead of ADB? Thanks!
Using a Samsung
Click to expand...
Click to collapse
What!!! No don't do that, Odin is for Samsung devices, just bottom to bootloader and use commands or if u can access ur OS download flashify
Bradl79 said:
What!!! No don't do that, Odin is for Samsung devices, just bottom to bootloader and use commands or if u can access ur OS download flashify
Click to expand...
Click to collapse
I already said I am using a Samsung...
Reflashed successfully. I still got TWRP working.
I unlocked my mobile bootloader and install twrp using pc. But from some reason I need to flash custom rom by MI flash beta software after that my custom TWRP change into MI recovery 3.0 so please help me to install twrp again
kankush709 said:
I unlocked my mobile bootloader and install twrp using pc. But from some reason I need to flash custom rom by MI flash beta software after that my custom TWRP change into MI recovery 3.0 so please help me to install twrp again
Click to expand...
Click to collapse
Why you don't use the way of first time you did it? You can use Flasify with root too.
Enviado desde mi MI MAX mediante Tapatalk
hi, i have i nova , and its hardbreaked, and i realy need the L01C432B131CUSTC432D001 full rom, i had tried the frimware finder, but didnt find it, i have tried other sites, but found some firmwares ( not the one im looking for), always fail, can someone help? thanks a lot!!!!
Thanks!!!!!!!!!!!!!!!!
tarekboukaf said:
hi, i have i nova , and its hardbreaked, and i realy need the L01C432B131CUSTC432D001 full rom, i had tried the frimware finder, but didnt find it, i have tried other sites, but found some firmwares ( not the one im looking for), always fail, can someone help? thanks a lot!!!!
Thanks!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
If it is hard bricked, I think that even with the full ota it'll be hard to fix your device.
If it is soft bricked, then you can flash twrp, then flash los or RR rom (you can find them in our device development threads) and fix your phone. Then you can take your time to find an official rom (if you want)
Hope you manage to fix it
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
If it is hard bricked, I think that even with the full ota it'll be hard to fix your device.
If it is soft bricked, then you can flash twrp, then flash los or RR rom (you can find them in our device development threads) and fix your phone. Then you can take your time to find an official rom (if you want)
Hope you manage to fix it
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks for ur reply .................. , i did a twrp backup before this problem, and when i tried to restore, the processue stopped at the custum file restore......
tarekboukaf said:
thanks for ur reply .................. , i did a twrp backup before this problem, and when i tried to restore, the processue stopped at the custum file restore......
Click to expand...
Click to collapse
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks, ill try .....................
Vinnom said:
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
hi again, i know there is fastboot commands to flash cust, boot,recovery,system to my device, but the system and cust cant be flashed bcz they are too large, i had tried mfastboot, but have same problem!
tarekboukaf said:
hi again, i know there is fastboot commands to flash cust, boot,recovery,system to my device, but the system and cust cant be flashed bcz they are too large, i had tried mfastboot, but have same problem!
Click to expand...
Click to collapse
When that happened to me, it was because I was using emui 5 and tried to apply a system.img from emui 4. It won't be possible.
The trick here is: search in forum for bluesmoothie's backup (the original link is down. Search for the bluesmoothie's backup that Henkate uploaded) and then restore it via twrp. When you do that, twrp will reformat your system partition. Then you can try to flash via fastboot the system.img
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
When that happened to me, it was because I was using emui 5 and tried to apply a system.img from emui 4. It won't be possible.
The trick here is: search in forum for bluesmoothie's backup (the original link is down. Search for the bluesmoothie's backup that Henkate uploaded) and then restore it via twrp. When you do that, twrp will reformat your system partition. Then you can try to flash via fastboot the system.img
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks for help, but i already downloaded blues backup, but failed, i have the error 255 in twrp, maybe ill makea flashable zip since i have backup ,but need meta-inf file
hi all
i had magisk 17.1 on my mi a2 lite and wanted to install ota update
i followed the guide but occurred on "no command" screen
now i flashed stock image with MiFlash but im now im stuck on loading screen (color bar running)
pls tell me adb command or any instructions to restore my phone
edit#1 same trying to install custom rom
machine1104 said:
hi all
i had magisk 17.1 on my mi a2 lite and wanted to install ota update
i followed the guide but occurred on "no command" screen
now i flashed stock image with MiFlash but im now im stuck on loading screen (color bar running)
pls tell me adb command or any instructions to restore my phone
edit#1 same trying to install custom rom
Click to expand...
Click to collapse
SOLVED
machine1104 said:
SOLVED
Click to expand...
Click to collapse
Can you say how solve for another users with the same problem in a future?
Enviado desde mi PRA-LX1 mediante Tapatalk
dannyzamora said:
Can you say how solve for another users with the same problem in a future?
Enviado desde mi PRA-LX1 mediante Tapatalk
Click to expand...
Click to collapse
yes sorry
i just downloaded the stock rom from xiaomi site and flashed it using the last versione of MiFlash
before maybe i used a wrong version of miflash that didnt work