hi, i have i nova , and its hardbreaked, and i realy need the L01C432B131CUSTC432D001 full rom, i had tried the frimware finder, but didnt find it, i have tried other sites, but found some firmwares ( not the one im looking for), always fail, can someone help? thanks a lot!!!!
Thanks!!!!!!!!!!!!!!!!
tarekboukaf said:
hi, i have i nova , and its hardbreaked, and i realy need the L01C432B131CUSTC432D001 full rom, i had tried the frimware finder, but didnt find it, i have tried other sites, but found some firmwares ( not the one im looking for), always fail, can someone help? thanks a lot!!!!
Thanks!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
If it is hard bricked, I think that even with the full ota it'll be hard to fix your device.
If it is soft bricked, then you can flash twrp, then flash los or RR rom (you can find them in our device development threads) and fix your phone. Then you can take your time to find an official rom (if you want)
Hope you manage to fix it
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
If it is hard bricked, I think that even with the full ota it'll be hard to fix your device.
If it is soft bricked, then you can flash twrp, then flash los or RR rom (you can find them in our device development threads) and fix your phone. Then you can take your time to find an official rom (if you want)
Hope you manage to fix it
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks for ur reply .................. , i did a twrp backup before this problem, and when i tried to restore, the processue stopped at the custum file restore......
tarekboukaf said:
thanks for ur reply .................. , i did a twrp backup before this problem, and when i tried to restore, the processue stopped at the custum file restore......
Click to expand...
Click to collapse
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks, ill try .....................
Vinnom said:
Oh I recommend you to try grarak twrp. You can find a link for it the op of nova los or rr thread
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
hi again, i know there is fastboot commands to flash cust, boot,recovery,system to my device, but the system and cust cant be flashed bcz they are too large, i had tried mfastboot, but have same problem!
tarekboukaf said:
hi again, i know there is fastboot commands to flash cust, boot,recovery,system to my device, but the system and cust cant be flashed bcz they are too large, i had tried mfastboot, but have same problem!
Click to expand...
Click to collapse
When that happened to me, it was because I was using emui 5 and tried to apply a system.img from emui 4. It won't be possible.
The trick here is: search in forum for bluesmoothie's backup (the original link is down. Search for the bluesmoothie's backup that Henkate uploaded) and then restore it via twrp. When you do that, twrp will reformat your system partition. Then you can try to flash via fastboot the system.img
Enviado de meu HUAWEI CAN usando Tapatalk
Vinnom said:
When that happened to me, it was because I was using emui 5 and tried to apply a system.img from emui 4. It won't be possible.
The trick here is: search in forum for bluesmoothie's backup (the original link is down. Search for the bluesmoothie's backup that Henkate uploaded) and then restore it via twrp. When you do that, twrp will reformat your system partition. Then you can try to flash via fastboot the system.img
Enviado de meu HUAWEI CAN usando Tapatalk
Click to expand...
Click to collapse
thanks for help, but i already downloaded blues backup, but failed, i have the error 255 in twrp, maybe ill makea flashable zip since i have backup ,but need meta-inf file
Related
Hi, first of all sorry about mi little english... I have the following issue:
I bought my Find 7 from Telcel (Mexico), the model of my find 7 is shown as Model Number: X9076 and Version Number: X9076MX_12.
I've tried to update (using both project spectrum zip and ColorOS V2.1.5i) using the methods that oppo described in their community posts (flash with stock recovery) with no success. It fails to update and reboot and the only message I get is "Actualizacion Fallida".
Would you please help me with a solution for this problem? Any workaround? It is because of telcel firmware?
My current ColorOS Version, it is V1.2.1i, Android 4.3
Thank you in advance.
Flash the recovery update from this thread first, then try to flash the COS update again.
Please help on updating OPPO Find 7 Telcel-Mexico
AngryHapposai said:
Flash the recovery update from ... first, then try to flash the COS update again.
Click to expand...
Click to collapse
Thank you very much for your answer my friend.. sadly it didn't work.. it keeps telling me "Update Failed" message.. should i try flashing the recovery img using fastboot or unlock the bootloader first (if possible on find 7)? It is safe to install any other recovery like twrp and try to update from it? The phone isn't rooted, it has stock telcel firmware.
leonardoBlancoM said:
Thank you very much for your answer my friend.. sadly it didn't work.. it keeps telling me "Update Failed" message.. should i try flashing the recovery img using fastboot or unlock the bootloader first (if possible on find 7)? It is safe to install any other recovery like twrp and try to update from it? The phone isn't rooted, it has stock telcel firmware.
Click to expand...
Click to collapse
It's possible that the update .zip you downloaded just didn't download correctly; it got corrupted or something. Maybe try downloading it again, and then try installing it again. The first tutorial has worked fine for myself and many others.
However, it is safe for you to install TWRP. I'd recommend downloading it direct from their website here . Grab the latest version available and flash it using fastboot.
BG64 said:
It's possible that the update .zip you downloaded just didn't download correctly; it got corrupted or something. Maybe try downloading it again, and then try installing it again. The first tutorial has worked fine for myself and many others.
However, it is safe for you to install TWRP. I'd recommend downloading it direct from their website here. Grab the latest version available and flash it using fastboot.
Click to expand...
Click to collapse
Thank you again for your answer.. i managed to install the recovery and the COS update using fastboot flash and the recovery img (version 4.3) from the zip file... Now I'm setting up mi Google account on the device... so it's done...thank you so much for your assistance.
leonardoBlancoM said:
Thank you again for your answer.. i managed to install the recovery and the COS update using fastboot flash and the recovery img (version 4.3) from the zip file... Now I'm setting up mi Google account on the device... so it's done...thank you so much for your assistance.
Click to expand...
Click to collapse
No problem!
leonardoBlancoM said:
Hi, first of all sorry about mi little english... I have the following issue:
I bought my Find 7 from Telcel (Mexico), the model of my find 7 is shown as Model Number: X9076 and Version Number: X9076MX_12.
I've tried to update (using both project spectrum zip and ColorOS V2.1.5i) using the methods that oppo described in their community posts (flash with stock recovery) with no success. It fails to update and reboot and the only message I get is "Actualizacion Fallida".
Would you please help me with a solution for this problem? Any workaround? It is because of telcel firmware?
My current ColorOS Version, it is V1.2.1i, Android 4.3
Thank you in advance.
Click to expand...
Click to collapse
Hola hermano! hace mucho vengo intentando actualizar mi telefono, es exactamente las mismas especificaciones que el tuyo, pero no entiendo eso del flashboot, podrias explicarme por favor!! gracias!!
I try to root my P8000 but I have a problem... In SPFlashTool all is ok... I put SPFT on Download Mode, I connect my phone... And all is installed ok.
But when I go to Recovery Mode... The phone restart and boot normally.
I don't know why that.
HELP PLEASE!! [emoji21] [emoji29]
Enviado desde mi Elephone P8000 mediante Tapatalk
iprogramation said:
I try to root my P8000 but I have a problem... In SPFlashTool all is ok... I put SPFT on Download Mode, I connect my phone... And all is installed ok.
But when I go to Recovery Mode... The phone restart and boot normally.
I don't know why that.
HELP PLEASE!! [emoji21] [emoji29]
Enviado desde mi Elephone P8000 mediante Tapatalk
Click to expand...
Click to collapse
Try using philz touch recovery, since the 12/03 build this is the only recovery that has worked for me. Then to root just flash SuperSU 2.46 zip
Yes, but how i install it... Better, how you install it?
Enviado desde mi Elephone P8000 mediante Tapatalk
With philz recovery just load the scatter file with spft like before. Instructions are in the link.
http://forum.xda-developers.com/ele...covery-philz-touch-6-59-0-port-p8000-t3224478
Look, i have the scatter with an recovery.img... I think is cwm, but, i use the same scatter but different recovery?
Enviado desde mi Elephone P8000 mediante Tapatalk
iprogramation said:
Look, i have the scatter with an recovery.img... I think is cwm, but, i use the same scatter but different recovery?
Enviado desde mi Elephone P8000 mediante Tapatalk
Click to expand...
Click to collapse
No, use the scatter file that comes in the philz recovery download. Once you unzip the file you will have the scatter file.
Yes, thx a lot... I've finally rooted my Phone!!! Thx a lot...
Enviado desde mi Elephone P8000 mediante Tapatalk
Thank you so much ! that's five hours I was trying to root the P8000 and then that's it, thanks to this post! Thank you ! !
can we flash philz recovery without root? otherwise this topic hasnt been answwered
kingofswords said:
can we flash philz recovery without root? otherwise this topic hasnt been answwered
Click to expand...
Click to collapse
Yes, phillz recovery will not root your phone on its own. If you look at my above comment I state you will then need to flash the supersu 2.46 zip file for root.
First of all, happy new year!
When i'm try to flash 4.0, I recieve an error saying I have the wrong device (error 7).
I'm using TWRP to flash, currently running Oxygen 3.2.8 and I am rooted.
How can I solve this without losing all my data?
Use the modified TWRP-version
Gr3nth said:
Use the modified TWRP-version
Click to expand...
Click to collapse
Where can I find that?
tom106447 said:
Where can I find that?
Click to expand...
Click to collapse
Here : TWRP for Nougat .
You can flash it using Flashify from your phone.
Dushaine said:
Here : TWRP for Nougat .
You can flash it using Flashify from your phone.
Click to expand...
Click to collapse
Thanks alot! This solved my problem, I am flashing Nougat right now.
please link exacly for TWRP NOUGAT
lukecat said:
please link exacly for TWRP NOUGAT
Click to expand...
Click to collapse
https://forum.xda-developers.com/devdb/project/dl/?id=21835
tom106447 said:
https://forum.xda-developers.com/devdb/project/dl/?id=21835
Click to expand...
Click to collapse
Only 18.97MB!¿!¿???
lukecat said:
Only 18.97MB!¿!¿???
Click to expand...
Click to collapse
Yes, it works perfect.
Hello, happy new year at all, can i flash twrp from my installed twrp recovery?
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Yes, switch from showing zip to img
Decryption problem
It's not possible to decrypt the phone (when partition is encrypted) with this version of TWRP.
It doesnt accept password used for encryption, and of course it does not work with "default_password"
hi all
i had magisk 17.1 on my mi a2 lite and wanted to install ota update
i followed the guide but occurred on "no command" screen
now i flashed stock image with MiFlash but im now im stuck on loading screen (color bar running)
pls tell me adb command or any instructions to restore my phone
edit#1 same trying to install custom rom
machine1104 said:
hi all
i had magisk 17.1 on my mi a2 lite and wanted to install ota update
i followed the guide but occurred on "no command" screen
now i flashed stock image with MiFlash but im now im stuck on loading screen (color bar running)
pls tell me adb command or any instructions to restore my phone
edit#1 same trying to install custom rom
Click to expand...
Click to collapse
SOLVED
machine1104 said:
SOLVED
Click to expand...
Click to collapse
Can you say how solve for another users with the same problem in a future?
Enviado desde mi PRA-LX1 mediante Tapatalk
dannyzamora said:
Can you say how solve for another users with the same problem in a future?
Enviado desde mi PRA-LX1 mediante Tapatalk
Click to expand...
Click to collapse
yes sorry
i just downloaded the stock rom from xiaomi site and flashed it using the last versione of MiFlash
before maybe i used a wrong version of miflash that didnt work
This tool will backup and restore your partition files like fsg, modemst, persist, modem and 80+ more files
Requirements:
Windows pc/laptop
custom recovery pre-installed
Download : [TOOL]
https://androidfilehost.com/?fid=8889791610682873568
How to backup :
Extract the laurel_sprout_backup & restore.rar into your pc/laptop
Reboot to custom recovery like twrp, shrp recovery
Mount all partition in recovery
Click laurel-sprout-bak.bat
Now all the 80+ partition files will be backuped in your internal storage and in your pc/laptop too
How to restore:
Reboot to fastboot /bootloader
Click laurel-sprout-flash.bat
Now all the 80+ partition files will be flashed (restored) to your device
Here's my backup files, if you needed
https://androidfilehost.com/?fid=1899786940962589872
Hit thanks button if you like my work?
Reserved
Thanks for sharing with us!
hello friend this can help with the problem of not detecting sim 1?
jomigp01 said:
hello friend this can help with the problem of not detecting sim 1?
Click to expand...
Click to collapse
Check imei number
Rajendran Rasa said:
Check imei number
Click to expand...
Click to collapse
If I have an imei number but slot 1 of the sim card does not recognize me
jomigp01 said:
If I have an imei number but slot 1 of the sim card does not recognize me
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1899786940962589872
Download this and flash it in fastboot
Commands are inside the zip
Then flash stock ROM
Rajendran Rasa said:
https://androidfilehost.com/?fid=1899786940962589872
Download this and flash it in fastboot
Commands are inside the zip
Then flash stock ROM
Click to expand...
Click to collapse
it does not work for me brother, the partition modemst1,2 fsg, hyp_a does not flash it. : S
jomigp01 said:
it does not work for me brother, the partition modemst1,2 fsg, hyp_a does not flash it. : S
Click to expand...
Click to collapse
Yes some files won't flash
Flash remaining files and then flash stock ROM
Rajendran Rasa said:
Yes some files won't flash
Flash remaining files and then flash stock ROM
Click to expand...
Click to collapse
I already did it and it doesn't work either
Enviado desde mi Mi A3 mediante Tapatalk
jomigp01 said:
I already did it and it doesn't work either
Enviado desde mi Mi A3 mediante Tapatalk
Click to expand...
Click to collapse
HW problem maybe
hardware problem already ruled out
Enviado desde mi Mi A3 mediante Tapatalk
i made a backup with this tool when i was on android 9, now i am on android 11, will i be able to go back to android 9 from android 11 with the backup i made with this tool?
gamernayeem said:
i made a backup with this tool when i was on android 9, now i am on android 11, will i be able to go back to android 9 from android 11 with the backup i made with this tool?
Click to expand...
Click to collapse
I think that downgrading is possible, but is never 100% safe. Maybe you will be lucky... Or maybe not. Also with miflash you can flash older android version... But if the phone goes into soft brick... I think is better for you stay on a11. Is a good system. With a lot of custom rom. Downgrade to 9 is useless in my opinion
gamernayeem said:
i made a backup with this tool when i was on android 9, now i am on android 11, will i be able to go back to android 9 from android 11 with the backup i made with this tool?
Click to expand...
Click to collapse
Did you Try ? and were you successful?
Nope don't have the courage
Also one dev said it wont work.
gamernayeem said:
Nope don't have the courage
Also one dev said it wont work.
Click to expand...
Click to collapse
best thing you did by not doing it because i have tried every type of method i could none of them worked.
Blackbird918Sr said:
best thing you did by not doing it because i have tried every type of method i could none of them worked.
Click to expand...
Click to collapse
I guess, we have to accept that we cant ever go back