Hi Guys,
got my LG G3 D855 16GB in "Coma" because of (maybe failed) Nightly-Update for CM13. Now i would need a .LAF or .KDZ File to revive it.
Maybe just the IMEI could help, because i could maybe download this above mentioned Files here: Click
Shame on me :cyclops: All i got is a efs-backup in form of (about ~20) .md5 and .win Files.
Can you help me how i could get to a .LAF or .KDZ File, in best case with some extractors :fingers-crossed:
Thanks
Ernesto0023 said:
Hi Guys,
got my LG G3 D855 16GB in "Coma" because of (maybe failed) Nightly-Update for CM13. Now i would need a .LAF or .KDZ File to revive it.
Maybe just the IMEI could help, because i could maybe download this above mentioned Files here: Click
Shame on me :cyclops: All i got is a efs-backup in form of (about ~20) .md5 and .win Files.
Can you help me how i could get to a .LAF or .KDZ File, in best case with some extractors :fingers-crossed:
Thanks
Click to expand...
Click to collapse
No one will ever give you their IMEI for security reason.
But, you can download KDZ from there: http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
and you can use it with this: http://forum.xda-developers.com/showthread.php?t=2785089
RapHaeL_4_4_4_ said:
No one will ever give you their IMEI for security reason.
But, you can download KDZ from there: http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
and you can use it with this: http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
Thanks, but i never wanted a IMEI - i think my IMEI is secured in my efs-backup. My question was how to extract it from it .
Ernesto0023 said:
Thanks, but i never wanted a IMEI - i think my IMEI is secured in my efs-backup. My question was how to extract it from it .
Found another solution with a .tot file, so the thread could be closed.
Click to expand...
Click to collapse
Ohh I didn't understood the IMEI part. But if you ever need it while your phone is bricked, its under the battery on a sticker :good:
RapHaeL_4_4_4_ said:
Ohh I didn't understood the IMEI part. But if you ever need it while your phone is bricked, its under the battery on a sticker :good:
Click to expand...
Click to collapse
Thanks for this advice, i´ve really never seen it there before.
Related
I ask for help. I tried to stitch an insertion from D855 on the F400K, having changed build.prop, Flashtool stopped with a mistake [ERROR]: Partition Change system Partition (Phone! =tot). I stitched KDZ D855 further. System not start. Boot-loop. Flashtool refuses to stitch, model is different. What to do how to return an initial insertion from F400K?
Just so I understand did you try to flash an EU handset with a Korean one?
daleski75 said:
Just so I understand did you try to flash an EU handset with a Korean one?
Click to expand...
Click to collapse
Yes. I buy korea model F400K and change file build.prop from D855, and flash with Flashtool
Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199
daleski75 said:
Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Could you post the solution ? I also encounter the same question . Thanks:crying:
Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.
serect said:
Could you post the solution ? I also encounter the same question . Thanks:crying:
Click to expand...
Click to collapse
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Lennyuk said:
Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.
Click to expand...
Click to collapse
You're an RD so im sure you know, ANy idea how to get the d855 to show the LTE bands in the service menu/secret menu?
People have bought it to use in the states on AT&T which uses 700mhz spectrum but cant get it to work and cant change what bands to use since they're not shown at all in the service menu.
DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
So it is impossible to flash F400K to D855 , right ?:crying:
serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
They have different radios.
Will probably brick it.
serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
Yes, wait custom firmware
DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
You are a legend mate! Been searching this for days now! My F400K that thinks it's a F400L has now been fully reflashed back to F400K10G build.
d855re
DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Hy , i have a lg g3 f400l 32go but in lg flashtool model is d855re, i try to flash with f400l and d855 tot and dell files but lg flashtools tels model device is diferent , check phone or dll , plese help me if you can ....
DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
please post modified DLL to help others out. that link does not work
daddioj said:
please post modified DLL to help others out. that link does not work
Click to expand...
Click to collapse
I agree that would help out a lot of people.
daleski75 said:
I agree that would help out a lot of people.
Click to expand...
Click to collapse
My rate impossible post normal link.
drive.google.com/file/d/0B-H4G_jDRCJwRVhBcFdGVzFjTHc/edit?usp=sharing
DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
Can you go to recovery ?! If you can, we can restore build.prop
hoangnova said:
Can you go to recovery ?! If you can, we can restore build.prop
Click to expand...
Click to collapse
I already restored long ago everything, thanks to this magic dll
DenisDA said:
I already restored long ago everything, thanks to this magic dll
Click to expand...
Click to collapse
with this dll , flashtool stop at 94% , i can't belive this ....
waiting for reset 40sec
mini os boot check ...
FAIL!!! Factory_BootComplete
Where I can find kdz firmware of G4?
I use the traditional method by eimi it doesn't work can't found kdz firmware.
Have you tried using this method? http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI Replace IMEI word, by your IMEI phone.
borimol said:
Have you tried using this method? http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI Replace IMEI word, by your IMEI phone.
Click to expand...
Click to collapse
I have tried but doesn't work no downlink.
Sent from my LG-H818
Hope we get this soon.
Jessooca said:
Once the kdz or tot is available you can bet it'll be here as "Hyelton" is a wee bit OCD about having "back to stock" guides up for just about every phone that you can imagine. He's already got the thread up and ready just not the kdz/tot file needed
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
Thank you,
I have 2 vdo clip for Guide Flash KDZ/TOT Firmware too.
No need Hyelton thread .He got many tut of other guys and put it to him thread . I have made guide for flash stock kdz offile that I found solution.He got it to him thread too.
You can also wait a few days/weeks for it to show in this website -
http://lg-phone-firmware.com/
Jessooca said:
Indeed, he used various things I created in the past as his own as well, no big deal but thought I'd let you know and for anyone else who might look for it.
Click to expand...
Click to collapse
Anyway ,Thank you so much.
Right, I'm new to LG phones (not new to android though).
What's a kdz? Is it like a full software package for LG phones?
Sent from my LG-H815 using Tapatalk
It's a full original LG ROM image. You can use it with LG Flash Tools to flash your phone. You can read more information about it here (but for now don't use it on the G4 until we know for sure that everything works at it should) -
http://forum.xda-developers.com/showthread.php?t=2785089
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
themaskofwraith said:
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
Click to expand...
Click to collapse
what for,?
I rooted ny phone and changed build.props model name. And now i can't boot.
raptorddd said:
what for,?
Click to expand...
Click to collapse
hi canu pls share tot file. thanks
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
therrs no tot file . only kdz
Can you use ADB / Fastboot? Do you have USB debugging enabled on your phone? Maybe you can pull the build.prop file, modify it and then push it back.
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
raptorddd said:
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
Click to expand...
Click to collapse
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
themaskofwraith said:
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
Click to expand...
Click to collapse
as far as i know ther isnt any TOT.
He can't use LGUP because the model name is changed in build.prop.
raptorddd said:
as far as i know ther isnt any TOT.
Click to expand...
Click to collapse
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
themaskofwraith said:
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
Click to expand...
Click to collapse
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
raptorddd said:
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
Click to expand...
Click to collapse
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
themaskofwraith said:
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
Click to expand...
Click to collapse
search herei n the lg g4 forum.
LGUP TOT
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
DellyBoi18 said:
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
Click to expand...
Click to collapse
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
raptorddd said:
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
Click to expand...
Click to collapse
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
DellyBoi18 said:
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
Click to expand...
Click to collapse
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
raptorddd said:
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
I figured it out. I typed * in the "File Name:" text box and pressed enter and everything showed.
Hey, guys.
I was wondering if you know how to get the partition.txt file from an AT&T LG G3 Stock ROM .tot through LG Firmware Extract? I recently bricked my phone is this is the second to last step, but the one I'm having the most trouble with. I have the .tot file as well as the .dll file, but I can't seem to find partition.txt from either of them.
Putting the .dll file in the program just gave me an error, the .tot file basically extracts all the files EXCEPT the one I'm looking for. I tried doing it in BoardDiag as well; it came up with the same results. I'll try to redownload the stock firmware and see if it was incomplete, but I don't think that's likely.
Anyone have any clues?
Dragour1041 said:
Hey, guys.
I was wondering if you know how to get the partition.txt file from an AT&T LG G3 Stock ROM .tot through LG Firmware Extract? I recently bricked my phone is this is the second to last step, but the one I'm having the most trouble with. I have the .tot file as well as the .dll file, but I can't seem to find partition.txt from either of them.
Putting the .dll file in the program just gave me an error, the .tot file basically extracts all the files EXCEPT the one I'm looking for. I tried doing it in BoardDiag as well; it came up with the same results. I'll try to redownload the stock firmware and see if it was incomplete, but I don't think that's likely.
Anyone have any clues?
Click to expand...
Click to collapse
I'm interested too.. I can't find the partitions.txt file in LG H340n .kdz firmware...
werthad said:
I'm interested too.. I can't find the partitions.txt file in LG H340n .kdz firmware...
Click to expand...
Click to collapse
I don't think it is in the firmware.
iloveoreos said:
I don't think it is in the firmware.
Click to expand...
Click to collapse
It is available in stock firmware.But you also need boarddiag to create a partition.txt or if you have d850 32gb att device then also i can provide you the partition.txt file.
bilawal.sarfraz.1 said:
It is available in stock firmware.But you also need boarddiag to create a partition.txt or if you have d850 32gb att device then also i can provide you the partition.txt file.
Click to expand...
Click to collapse
Ok good. Could you send it to me even though mine is a d852? My phone isn't bricked, but I want to look at it.
iloveoreos said:
Ok good. Could you send it to me even though mine is a d852? My phone isn't bricked, but I want to look at it.
Click to expand...
Click to collapse
Brother its not a childs play,tell me the purpose and i will tell you the full method to create partition file.
bilawal.sarfraz.1 said:
Brother its not a childs play,tell me the purpose and i will tell you the full method to create partition file.
Click to expand...
Click to collapse
I just wanted to look through it for curiosity sake. But if it isn't too complicated, could you tell me how to make one? I might someday brick mine lol.
iloveoreos said:
I just wanted to look through it for curiosity sake. But if it isn't too complicated, could you tell me how to make one? I might someday brick mine lol.
Click to expand...
Click to collapse
Ok.Download the .tot file of your stock rom.Kdz not work thats why you neef the .tot file then open boarddiag.At the end of boarddiag,you need to select the bin (in which select the downloaded .tot) and then select the output destination folder where you want to get partition file. Note : During process boarddiag will stuck and the pc shows not responding on boarddiag,dont worry keep it continue until the boarddiag says that the extraction is completed.
If i really help you then you can give me a like ☺☺.
Hello,
I have a LG G3 (D855P - Made and sold in Brazil) that I bricked while trying to root it with LGUP (actually to downgrade it first). It won't boot normally neither enter download mode anymore. When I plug it on windows it says "Quectel QDLoader 9008". Yes, Quectel, I assume it's supposed to be QUalcomm. Software version is V30A. So yeah, I'm trying to find the .tot for it because I could only find the .kdz file here:
*I can't post it because I'm new* Remove " dot " and add ".". And don't forget to add the http thing in the beginning.
pkg02 dot cdn dot gdms dot lge.com/dn/downloader.dev?fileKey=FWDCCTI972GMA1Y8685CZCL/D855P30a_00_0118.kdz
Question is: Does anybody have the .tot file for it?
Can I use random D855P .tot file or some variant? If so, which? Like 10A, 20A, or 30A. OR, 30B, C...? Since mine is 30A.
thanks and HELP!
Edit: managed to get Qualcomm thing. But no TOT for it Also, If it try another random tot for D855 I get "No AP... try pmic first".
I believe this tool will extract a TOT from a KDZ
https://forum.xda-developers.com/showthread.php?t=2483250
Whatsgoingon said:
I believe this tool will extract a TOT from a KDZ
https://forum.xda-developers.com/showthread.php?t=2483250
Click to expand...
Click to collapse
It still misses the partition.txt needed in boardiag.
Perhaps this may help: https://web.archive.org/web/2015111...how-to-create-partition-txt-file-kdz-t3109859
I am not exactly sure because this is for a D502, but perhaps the theory will help.
Hopefully someone else can help out here.
Whatsgoingon said:
Perhaps this may help: https://web.archive.org/web/2015111...how-to-create-partition-txt-file-kdz-t3109859
I am not exactly sure because this is for a D502, but perhaps the theory will help.
Hopefully someone else can help out here.
Click to expand...
Click to collapse
WIll give it a look.
I just managed to change the "queltec" **** to qualcomm. Now I'm going to reboot and try what you said. Will edit this post soon so I won't double post.
Edit: it's impossible to follow this tutorial with no images loading.
I'm sorry :/ the original post was deleted so the images are gone. I hope someone else can help... Best of luck.