Related
HELP!! My kindle fire is bricked. It Wont power on. When i plug it to charge, the light on the power button wont light up. It wont do a hard reset. Yes i was in a process of rooting it. Yes i tried the unroot utility...Both of them. I have tried every thing i know of.:crying: Please help me as soon as possable.
do you have adb or fastboot
re
lovejoy777 said:
do you have adb or fastboot
Click to expand...
Click to collapse
yes it did
to vague cant do a whole lot for ya without more info what did you do that caused this ?
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
http://forum.xda-developers.com/showthread.php?t=1644970 how to ask for help
hope this info helps
Josepho1997 said:
Did it turn off while it was in the process of rooting?
Did it successfully root?
Did it seem to be stuck on the Red and White Kindle Fire Screen?
When you plug it in to the charger, do you see anything on the screen light up?
I would try plugging in the charger and holding the power for around 12 seconds. Then check on it later. If you installed fff already, then charge via usb.
Click to expand...
Click to collapse
yes
no battery ran out
no
no
no i did not install fff
i already installed twrp, i was installing a rom and when i unmounted system it ran out of battery
a lil better heres your solution http://forum.xda-developers.com/showthread.php?t=1430038 or plug it in let it charge first but firekit will still be needed
---------- Post added at 08:14 PM ---------- Previous post was at 08:13 PM ----------
sorry wish it was an easyier fix but its not
if you have at least a 4 gig usb stick setup teamviewer I will assist you in getting ready to fix it
time to work
Thepooch said:
a lil better heres your solution http://forum.xda-developers.com/showthread.php?t=1430038 or plug it in let it charge first but firekit will still be needed
---------- Post added at 08:14 PM ---------- Previous post was at 08:13 PM ----------
sorry wish it was an easyier fix but its not
Click to expand...
Click to collapse
k thanks ill try it out tell you later how it comes along.:highfive: hope it works
if you need help with the firekit just post questions here, but let us know at what stage your at in the process and what has just happened etc.
don't woory it will all come good.
just follow the guide (no short cuts)
ok thanks all. Pooch is on the case so thank you all who read this.:victory:
did your problem solved or not
I am at the same Situation on my KF... What about your Present Situation, is Firekit Helps u to recover ur Kindle fire?????????????
balakrishnan111 said:
I am at the same Situation on my KF... What about your Present Situation, is Firekit Helps u to recover ur Kindle fire?????????????
Click to expand...
Click to collapse
Start a thread please and describe the exact nature of the state of your kindle and we can try to help you get it sorted out
How do I unlock my Xperia S? I've tried many ways, none to which have worked.
Could someone offer some assistance?
fuQt said:
How do I unlock my Xperia S? I've tried many ways, none to which have worked.
Could someone offer some assistance?
Click to expand...
Click to collapse
Go here : http://unlockbootloader.sonymobile.com/
I've tried but it didn't work.
fuQt said:
I've tried but it didn't work.
Click to expand...
Click to collapse
Try again. Here you go : http://www.xda-developers.com/andro...or-unlockingrelocking-the-bootloader-rooting/
fuQt said:
I've tried but it didn't work.
Click to expand...
Click to collapse
Yeah...try again. It worked for most of the people. And if you are still not able to do, kindly mention the step where you are getting stuck. People will be able to help better if they understand the problem...
Best of luck...!!!
Is ur phone even unlockable? If yes,then put the code that Sony send u in a software called Sony Relocking Bootloader,it will definitely unlock it
Sent from my LT26i using xda premium
---------- Post added at 03:09 AM ---------- Previous post was at 03:08 AM ----------
I'll post the link later
Sent from my LT26i using xda premium
@rka said:
Yeah...try again. It worked for most of the people. And if you are still not able to do, kindly mention the step where you are getting stuck. People will be able to help better if they understand the problem...
Best of luck...!!!
Click to expand...
Click to collapse
It just gets stuck on here
Waited long and it didn't do anything.
fuQt said:
It just gets stuck on here
Waited long and it didn't do anything.
Click to expand...
Click to collapse
Looks like your device is not connected to the PC in fastboot.
Are you properly connected with the blue LED on?? If you have flashtool, open that. It shows if your device is connected in fastboot or not.
fuQt said:
It just gets stuck on here
Waited long and it didn't do anything.
Click to expand...
Click to collapse
Besides, make sure you have installed correct drivers.
If you have flashtool, go to C:/Flashtool/drivers and run the .exe file in it.
@rka said:
Looks like your device is not connected to the PC in fastboot.
Are you properly connected with the blue LED on?? If you have flashtool, open that. It shows if your device is connected in fastboot or not.
Click to expand...
Click to collapse
My LED is green when connected to the PC.
I power off the device, wait 30 seconds. Then hold the volume button as I connect the USB
It should be blue in fastboot mode
Sent from my LT26i using xda premium
So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?
fuQt said:
My LED is green when connected to the PC.
I power off the device, wait 30 seconds. Then hold the volume button as I connect the USB
Click to expand...
Click to collapse
Yes...you are not connected in fastboot. Like @cities516 said, apparently, you don't have the proper driver installed.Install the driver as suggested.
I was having issues with fastboot(it used to go in fastboot and then get disconnected and entered normal charging mode) as I am using windows 8(64Bit)...If you are having for that, this thread helped me...update your android_winusb.inf file accordingly and install it.
If things go right, device should get connected in fastboot and blue LED should remain on.
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
ohh...you unlocked BL...cool
@rka said:
Yes...you are not connected in fastboot. Like @cities516 said, apparently, you don't have the proper driver installed.Install the driver as suggested.
I was having issues with fastboot(it used to go in fastboot and then get disconnected and entered normal charging mode) as I am using windows 8(64Bit)...If you are having for that, this thread helped me...update your android_winusb.inf file accordingly and install it.
If things go right, device should get connected in fastboot and blue LED should remain on.
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
ohh...you unlocked BL...cool
Click to expand...
Click to collapse
See my post above.
"So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?"
fuQt said:
See my post above.
"So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?"
Click to expand...
Click to collapse
Do you mean your network signal is down since you unlocked your bootloader?? That should not have hapened.
can you dial *#*#7378423#*#* and check in service info > configuration and check the bootloader unlock status??
This Problem is solved and worked successfully
wouldn't fix or unbrick my phone without the help of these guys , all my respect goes to ::
@willcracker
@os_man
@setul34
@l33tlinuxh4x0r
@sd_shadow
if this thread was useful to you please donate to them with a cup of coffee
Hi XDA
i didn't want to make it a long thread but i have to , bare with me here :
first i followed that topic on XDA : http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
i tried to install twrp with imageprep but after rebooting it says secure booting error or something like that
i also tried this after that but with the same error https://www.youtube.com/watch?v=2we1YDc5JGU
but always the mobile was rebooting and opened like nothing happened
so i searched the internet for a solution i tried this one : https://www.youtube.com/watch?v=4YZ0i6aFsfM
but i guess the file attached weren't compatible so it ends up with an error before doing anything so there was no option except this : http://forum.xda-developers.com/lg-g3/help/help-secure-boot-error-trying-to-boot-t3054977
and here comes the misery , cuz i just got my phone and after the step while you write the commands in the android terminal emulator
and BOOM everything went black
NO BOOT , NO RECOVERY , NO DOWNLOAD MODE , absolutely NOTHING :crying: i freaked out a lot , but after searching for 3 days i've found this xda thread : http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
sadly i'm now on LGE AndroidNet USB port (com 11)
and what i'm getting from this thread that i've to short circuit two pins in my LG G3 Motherboard so i can switch LGE AndriodNet USB Port to Qualcomm 9008
Before anything else i want to make sure that i'm on the right track so just want to approve these steps :
1- open the phone
2- to make the device read as "Qualcomm 9008" not as "LGE AndriodNet USB Modem" i have to :
a- short cut the pins in the photo you provided "without the battery" for 3 minutes
b- connect the phone with the USB cable in the computer "without the battery"
c- my PC will detect the device as "Qualcomm"
3- after that i'm good to use your LG G3 unbrick method
are these steps right ?
just need to know when to plug in my battery and when i connect the phone with the cable , the pins must be connected or i can just connect the pins for 3 minutes and then remove the connection between them ?
Please anyone answers me with the exact steps or give me a short video on how to do it alone because i'm still rookie at these stuff
thanks xda members :fingers-crossed:
Am i posting in the wrong section or what ?
Evilix said:
Am i posting in the wrong section or what ?
Click to expand...
Click to collapse
If you have asked for help in the threads you have linked, without receiving a response, you can try quoting someone that may know or use @ before their user name like @sd_shadow
This is a very technical and likely very few people have even attempted it, so it may be awhile before the right people log in to XDA and see your post.
This thread will be moved to G3 Q&A, Help & Troubleshooting
I too am having issues with my LG G3 trying this method but the thread linked has been closed.
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
setul34 said:
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
Click to expand...
Click to collapse
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
setul34 said:
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
Click to expand...
Click to collapse
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
l33tlinuxh4x0r said:
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
Click to expand...
Click to collapse
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
THANKS ALL for replying and i will try again 2 mins this time
setul34 said:
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
Click to expand...
Click to collapse
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
l33tlinuxh4x0r said:
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
Click to expand...
Click to collapse
so are you done with BoardDiag tool? and can you go in download mode ?
setul34 said:
so are you done with BoardDiag tool? and can you go in download mode ?
Click to expand...
Click to collapse
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
have you checked your port# in device manager ? and in BoardDiag tool ? are those same ?
---------- Post added at 10:41 PM ---------- Previous post was at 10:37 PM ----------
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
Maybe @os_man can help you with this error. i'm exactly not sure about this error.
is someone stuck at unknown USB device (something something) ??
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
l33tlinuxh4x0r said:
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
Click to expand...
Click to collapse
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
Evilix said:
is someone stuck at unknown USB device (something something) ??
Click to expand...
Click to collapse
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
please give me the right working link for the qualcomm drivers , thanks in advance
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
here are the drivers http://www.androidbrick.com/?wpdmdl=3173 both 32 bit and 64 bit but remember that you have to turn off driver signing if using a 64 bit OS.
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
l33tlinuxh4x0r said:
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
Click to expand...
Click to collapse
try to go back in downloading mod. if you cant then can u tell me what step u did in BoardDiag tool
---------- Post added at 11:15 PM ---------- Previous post was at 11:11 PM ----------
Evilix said:
please give me the right working link for the qualcomm drivers , thanks in advance
Click to expand...
Click to collapse
here you go.
http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Hi Guys,
Can you point me where the test point is of F460 ? I need to put it in qhsusb 9008
Have you found a solution ?
I have the same problem, I don't know where the point is !
Thanks !
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
Click to expand...
Click to collapse
but the f460 board is not same as the g3..
arl8488 said:
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
but the f460 board is not same as the g3..
Click to expand...
Click to collapse
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
Man i wish i could. Need the test point bad. Ima look and see if i can find somethin
---------- Post added at 08:28 PM ---------- Previous post was at 08:21 PM ----------
So far from what ive read if its not picking up qloader. Either motherboard replace.ent or jtag. Now theres a chance the batter is to dead cause i know the g2 wont charge in qloader mode hard bricked. I had to buy a fastboot cable for a kidle fire which is soldered diffrently than a usb and a otg cable. And it force charges while hard bricked. Worked on my hard bricked dead kindle and my g2 which the bat died in while hard bricked. But i had to do the ground point to get it in qloader after it charged. That also might be ure issue. Is it wont pick up cause the bat is dead. But from what im reading. This is the cat 6 rite. That sofar these are the only ideas i have
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/how-to-unbrick-hardbrick-g3-cat-6-f460-t3489860
Try this.
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
arl8488 said:
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
Click to expand...
Click to collapse
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
TheMadScientist420 said:
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
Click to expand...
Click to collapse
yeah..thats why i am researching for the right way to test point the device..i've seen video in youtube with same issue but did not show the procedure, hoping someone experienced this kind of issue and teach us how to fix..
Hi! I managed to brick my device, does anyone know FOR SURE where is the test point for G4 in order to get into QHSUSB BULK ?
rav0r said:
Hi! I managed to brick my device, does anyone know FOR SURE where is the test point for G4 in order to get into QHSUSB BULK ?
Click to expand...
Click to collapse
I havnt found it yet but if u do please let me know. Im not bricked but itz
Always good to know my options juat in case
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
rav0r said:
Hi! I managed to brick my device, does anyone know FOR SURE where is the test point for G4 in order to get into QHSUSB BULK ?
Click to expand...
Click to collapse
What kindof brick. Do u have anything come up or just the dimly lit screen
TheMadScientist420 said:
I havnt found it yet but if u do please let me know. Im not bricked but itz
Always good to know my options juat in case
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
What kindof brick. Do u have anything come up or just the dimly lit screen
Click to expand...
Click to collapse
It has the normal boot screen, I was just not careful and erased my system.
rav0r said:
It has the normal boot screen, I was just not careful and erased my system.
Click to expand...
Click to collapse
You do not need test point for that. If you erased your system only you have access to download mode
Yes, but the button combination does not work. I already tested all options
rav0r said:
Yes, but the button combination does not work. I already tested all options
Click to expand...
Click to collapse
There is no button combination for download mode. Pull battery out. Leave it out for 10 seconds. Connect usb to back port of pc. Put battery back in. While holding Volume UP connect USB. After you see Download Mode on screen release button.
Already done. No effect.
I would like this as well. It is possible to end up in a boot loop with no access to download mode...ask me how I know ?