Related
HELP!! My kindle fire is bricked. It Wont power on. When i plug it to charge, the light on the power button wont light up. It wont do a hard reset. Yes i was in a process of rooting it. Yes i tried the unroot utility...Both of them. I have tried every thing i know of.:crying: Please help me as soon as possable.
do you have adb or fastboot
re
lovejoy777 said:
do you have adb or fastboot
Click to expand...
Click to collapse
yes it did
to vague cant do a whole lot for ya without more info what did you do that caused this ?
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
http://forum.xda-developers.com/showthread.php?t=1644970 how to ask for help
hope this info helps
Josepho1997 said:
Did it turn off while it was in the process of rooting?
Did it successfully root?
Did it seem to be stuck on the Red and White Kindle Fire Screen?
When you plug it in to the charger, do you see anything on the screen light up?
I would try plugging in the charger and holding the power for around 12 seconds. Then check on it later. If you installed fff already, then charge via usb.
Click to expand...
Click to collapse
yes
no battery ran out
no
no
no i did not install fff
i already installed twrp, i was installing a rom and when i unmounted system it ran out of battery
a lil better heres your solution http://forum.xda-developers.com/showthread.php?t=1430038 or plug it in let it charge first but firekit will still be needed
---------- Post added at 08:14 PM ---------- Previous post was at 08:13 PM ----------
sorry wish it was an easyier fix but its not
if you have at least a 4 gig usb stick setup teamviewer I will assist you in getting ready to fix it
time to work
Thepooch said:
a lil better heres your solution http://forum.xda-developers.com/showthread.php?t=1430038 or plug it in let it charge first but firekit will still be needed
---------- Post added at 08:14 PM ---------- Previous post was at 08:13 PM ----------
sorry wish it was an easyier fix but its not
Click to expand...
Click to collapse
k thanks ill try it out tell you later how it comes along.:highfive: hope it works
if you need help with the firekit just post questions here, but let us know at what stage your at in the process and what has just happened etc.
don't woory it will all come good.
just follow the guide (no short cuts)
ok thanks all. Pooch is on the case so thank you all who read this.:victory:
did your problem solved or not
I am at the same Situation on my KF... What about your Present Situation, is Firekit Helps u to recover ur Kindle fire?????????????
balakrishnan111 said:
I am at the same Situation on my KF... What about your Present Situation, is Firekit Helps u to recover ur Kindle fire?????????????
Click to expand...
Click to collapse
Start a thread please and describe the exact nature of the state of your kindle and we can try to help you get it sorted out
This Problem is solved and worked successfully
wouldn't fix or unbrick my phone without the help of these guys , all my respect goes to ::
@willcracker
@os_man
@setul34
@l33tlinuxh4x0r
@sd_shadow
if this thread was useful to you please donate to them with a cup of coffee
Hi XDA
i didn't want to make it a long thread but i have to , bare with me here :
first i followed that topic on XDA : http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
i tried to install twrp with imageprep but after rebooting it says secure booting error or something like that
i also tried this after that but with the same error https://www.youtube.com/watch?v=2we1YDc5JGU
but always the mobile was rebooting and opened like nothing happened
so i searched the internet for a solution i tried this one : https://www.youtube.com/watch?v=4YZ0i6aFsfM
but i guess the file attached weren't compatible so it ends up with an error before doing anything so there was no option except this : http://forum.xda-developers.com/lg-g3/help/help-secure-boot-error-trying-to-boot-t3054977
and here comes the misery , cuz i just got my phone and after the step while you write the commands in the android terminal emulator
and BOOM everything went black
NO BOOT , NO RECOVERY , NO DOWNLOAD MODE , absolutely NOTHING :crying: i freaked out a lot , but after searching for 3 days i've found this xda thread : http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
sadly i'm now on LGE AndroidNet USB port (com 11)
and what i'm getting from this thread that i've to short circuit two pins in my LG G3 Motherboard so i can switch LGE AndriodNet USB Port to Qualcomm 9008
Before anything else i want to make sure that i'm on the right track so just want to approve these steps :
1- open the phone
2- to make the device read as "Qualcomm 9008" not as "LGE AndriodNet USB Modem" i have to :
a- short cut the pins in the photo you provided "without the battery" for 3 minutes
b- connect the phone with the USB cable in the computer "without the battery"
c- my PC will detect the device as "Qualcomm"
3- after that i'm good to use your LG G3 unbrick method
are these steps right ?
just need to know when to plug in my battery and when i connect the phone with the cable , the pins must be connected or i can just connect the pins for 3 minutes and then remove the connection between them ?
Please anyone answers me with the exact steps or give me a short video on how to do it alone because i'm still rookie at these stuff
thanks xda members :fingers-crossed:
Am i posting in the wrong section or what ?
Evilix said:
Am i posting in the wrong section or what ?
Click to expand...
Click to collapse
If you have asked for help in the threads you have linked, without receiving a response, you can try quoting someone that may know or use @ before their user name like @sd_shadow
This is a very technical and likely very few people have even attempted it, so it may be awhile before the right people log in to XDA and see your post.
This thread will be moved to G3 Q&A, Help & Troubleshooting
I too am having issues with my LG G3 trying this method but the thread linked has been closed.
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
setul34 said:
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
Click to expand...
Click to collapse
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
setul34 said:
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
Click to expand...
Click to collapse
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
l33tlinuxh4x0r said:
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
Click to expand...
Click to collapse
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
THANKS ALL for replying and i will try again 2 mins this time
setul34 said:
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
Click to expand...
Click to collapse
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
l33tlinuxh4x0r said:
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
Click to expand...
Click to collapse
so are you done with BoardDiag tool? and can you go in download mode ?
setul34 said:
so are you done with BoardDiag tool? and can you go in download mode ?
Click to expand...
Click to collapse
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
have you checked your port# in device manager ? and in BoardDiag tool ? are those same ?
---------- Post added at 10:41 PM ---------- Previous post was at 10:37 PM ----------
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
Maybe @os_man can help you with this error. i'm exactly not sure about this error.
is someone stuck at unknown USB device (something something) ??
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
l33tlinuxh4x0r said:
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
Click to expand...
Click to collapse
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
Evilix said:
is someone stuck at unknown USB device (something something) ??
Click to expand...
Click to collapse
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
please give me the right working link for the qualcomm drivers , thanks in advance
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
here are the drivers http://www.androidbrick.com/?wpdmdl=3173 both 32 bit and 64 bit but remember that you have to turn off driver signing if using a 64 bit OS.
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
l33tlinuxh4x0r said:
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
Click to expand...
Click to collapse
try to go back in downloading mod. if you cant then can u tell me what step u did in BoardDiag tool
---------- Post added at 11:15 PM ---------- Previous post was at 11:11 PM ----------
Evilix said:
please give me the right working link for the qualcomm drivers , thanks in advance
Click to expand...
Click to collapse
here you go.
http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Hi Guys,
Can you point me where the test point is of F460 ? I need to put it in qhsusb 9008
Have you found a solution ?
I have the same problem, I don't know where the point is !
Thanks !
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
Click to expand...
Click to collapse
but the f460 board is not same as the g3..
arl8488 said:
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
but the f460 board is not same as the g3..
Click to expand...
Click to collapse
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
Man i wish i could. Need the test point bad. Ima look and see if i can find somethin
---------- Post added at 08:28 PM ---------- Previous post was at 08:21 PM ----------
So far from what ive read if its not picking up qloader. Either motherboard replace.ent or jtag. Now theres a chance the batter is to dead cause i know the g2 wont charge in qloader mode hard bricked. I had to buy a fastboot cable for a kidle fire which is soldered diffrently than a usb and a otg cable. And it force charges while hard bricked. Worked on my hard bricked dead kindle and my g2 which the bat died in while hard bricked. But i had to do the ground point to get it in qloader after it charged. That also might be ure issue. Is it wont pick up cause the bat is dead. But from what im reading. This is the cat 6 rite. That sofar these are the only ideas i have
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/how-to-unbrick-hardbrick-g3-cat-6-f460-t3489860
Try this.
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
arl8488 said:
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
Click to expand...
Click to collapse
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
TheMadScientist420 said:
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
Click to expand...
Click to collapse
yeah..thats why i am researching for the right way to test point the device..i've seen video in youtube with same issue but did not show the procedure, hoping someone experienced this kind of issue and teach us how to fix..
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
Try flashing back to stock rom using lg flashtool
moswald1978 said:
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
Try flashing back to stock rom using lg flashtool
Click to expand...
Click to collapse
I can't access download mode, so I guess flashtool is not an option.
ToRt1sher said:
I can't access download mode, so I guess flashtool is not an option.
Click to expand...
Click to collapse
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
moswald1978 said:
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
Click to expand...
Click to collapse
Kdz
How will it put my phone into download mode? If i click start, it says the phone is not connected to the computer. My computer can see the device as ADB device, but only offline or unauthorized.
When I used it my phone was stuck on the LG screen. Flashtool found my device and started the upgrade then it booted my phone into download mode
That does not work for me.. The program is stuck at 60% and telling me phone is not connected.
The only other option I can think of would be to a hard factory reset. Make sure your phone is off then hold down power and volume down together when the LG logo appears keep holding them. It should take you to that menu
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
I guess it will be very hard to flash KDZ or TOT cause you need to put your phone to download mode or need to connect ADB. following the post.
ToRt1sher said:
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
Click to expand...
Click to collapse
did you ever find a solution ?
x000x said:
did you ever find a solution ?
Click to expand...
Click to collapse
No, that's why I asked for help here.
Any news guys? Did somebody find a solution to the killswitch problem?
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
ToRt1sher said:
No, that's why I asked for help here.
Click to expand...
Click to collapse
It may seem hard but its really not
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
It may seem hard but its really not
Click to expand...
Click to collapse
You saved me, thanks a lot!!!
So i basically ended up delting boot partition or something.My Lg g3 wont turn on now.I was trying to fix Boot verfication but ended into more of a mess.It wont go to download mode ( pluging Usb cable and presing Up button).My phone is recognised by my pc when i connect it.Previously i had rooted it.Start of all this mess was while trying to install a custom recover Twrp.Any fixes now or i goota get a Jtag.
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read page entirely
Thanks TheMadScientist420 for reply but I did not understand a thing plus link to tool is also not working.
Lemme say it again phone won't turn on go to download mode or recovery.
You cannlook the tool up straight on google its out there im at work now so i not near my comp or i could walk u through further down the page it talks about disasambling the mother bord slightly kinda like jtag just not soldiering what ure doing is resetting the. Boot partitions to a factory blank state then ure using ure restore tot file and extraction stock partitions and pushing them to previously stated blank partitions on phone
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
It took me like 5 or 6 tries to short the pins out to do it
What exactly is the tools name btw? one i found requires me to pay to unzip it.
its on androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Bout half way down are the files u need
I got lg g3 D855 BTW thanks.
babapera said:
I got lg g3 D855 BTW thanks.
Click to expand...
Click to collapse
Could you fix your problem?
re
Sidz4u said:
Could you fix your problem?
Click to expand...
Click to collapse
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.
babapera said:
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.
Click to expand...
Click to collapse
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?
You have to force it into the qualcom port with the pin shorting guide
---------- Post added at 01:10 PM ---------- Previous post was at 12:40 PM ----------
Again i stand corrected the g2 bad a ms dos script that pushed the partitions on the g3 wilzcracker aparntly pushes them so just follow the guide it works
Sidz4u said:
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?
Click to expand...
Click to collapse
Not really
On your pc goto device manager youll see comms and ports thats wher youll see lg or qusb bulk 9008
my phones back online thanks mate. its working again
babapera said:
my phones back online thanks mate. its working again
Click to expand...
Click to collapse
what all did u do ??
just follow the guide
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
i followed the link but confused with their description on the pin shorting ..[.i cant find the specific pins to short.... please how did u short it......and which pins did u short
A small wire and you have to diasmble to get to the shorting point
TheMadScientist420 said:
A small wire and you have to diasmble to get to the shorting point
Click to expand...
Click to collapse
I am in India.. and we don't have .tot here. We use .kdz
Last I was on v21a.. fulmics rom.
Where should I get the tot files from ?
U can use kdz. http://forum.xda-developers.com/showthread.php?t=2785089