So I installed Cm 7.1 smoothly. But it never works.
here is what I've tried:
Install CM 7.1, reboot into recovery and install google apps, nothing shows up
Install CM 7.1, reboot into recovery and install pacman, nothing shows up
Install CM 7.1, reboot into recovery and manually install the android market apk, Can launch the market but when I try to login it crashes.
Install CM 7.1 then install apps and then reboot. No google apps show up.
I'm kind of lost right now.
Thanks!
phazedplasma said:
So I installed Cm 7.1 smoothly. But it never works.
here is what I've tried:
Install CM 7.1, reboot into recovery and install google apps, nothing shows up
Install CM 7.1, reboot into recovery and install pacman, nothing shows up
Install CM 7.1, reboot into recovery and manually install the android market apk, Can launch the market but when I try to login it crashes.
Install CM 7.1 then install apps and then reboot. No google apps show up.
I'm kind of lost right now.
Thanks!
Click to expand...
Click to collapse
Try using SuperWipe then while still in recovery flash your rom and flash gapps right after.
If that fails I'd suggest flashing one of the CM Nightlies a lot of the earlier issues found in 7.1 have been cleaned up in nightlies.
Which gapps are you using and have you tried flashing them before letting CM7 boot the first time?
Sent from my HTC Vision using XDA
I install CM 9.0 on my ARC with this expression http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc:_Full_Update_Guide but when phone is open I have an error message "Unfortunately,Setup Wizard has stopped." on my screen and my phone doesn't open.What will I do?:crying:
Try reinstalling it, and use THIS one instead.
I install stock ROM and stock kernel,I root it,unlocked bootloader after this I install CWM Autoinstaller on Google play,install CM 9.0 RC2 Kernel and when phone open I push the back button wipe data,factory reset,wipe cache and wipe dalvik cache I install zip file CM 9.0 RC2 but error everything
Flash the FXP kernel instead.
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Try doing full wipe and reinstall CM 10 as you did previously
Sent from my Xperia S using xda app-developers app
I tried that too. Like this you mean
1. Fastboot boot.img
2. Fastboot reboot
3. Enter recovery
4. Factory reset
5. Wipe/format system, cache, data, dalvik
6. Install Rom zip
But then I get error and says installation aborted..
Sent from my LT26i using xda app-developers app
dumbl3 said:
I tried that too. Like this you mean
1. Fastboot boot.img
2. Fastboot reboot
3. Enter recovery
4. Factory reset
5. Wipe/format system, cache, data, dalvik
6. Install Rom zip
But then I get error and says installation aborted..
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I have the same problem My phone not boot in just freexperia logo and cwm5.5.0.4. My /data partition can't mount and format I can't install any rom:crying: Heeeeeelp:crying:
All will be fixed
dumbl3 said:
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Click to expand...
Click to collapse
Follow this thread for Kernel and Rom installation; http://forum.xda-developers.com/showthread.php?t=1879982
Follow this other to select your Rom; http://forum.xda-developers.com/showthread.php?t=1642480
And take that cm-10-20130110-UNOFFICIAL is CM 10.2 for such reason look for JB Gapps For Android version 4.1.2
I flashed the Rom very well, also the kernel. my problem were the Gapps. I see there that you do not have the correct gapp zip for cm-10-20130110-UNOFFICIAL;This is CM 10.2 after installation and you need a 4.1.2 JB Gapps. Try and repeat the process.
Regards,
apsanchezs said:
I see there that you do not have the correct gapp zip for cm-10-20130110-UNOFFICIAL;This is CM 10.2 after installation and you need a 4.1.2 JB Gapps. Try and repeat the process.
Click to expand...
Click to collapse
I do have the correct gapps. This CM is android version 4.1.2. Here I downloaded the latest for CyanogenMod 10.0.x which is for android versions 4.1.x.
Anyway after a whole evening/night of flashing I finally managed to get it working via hei1125 cm10 version:
http://goo.im/devs/hei1125/nozomi
I dont know what I did to make it working again, but it does.. CM10 does look a lot nicer then CM9. Although I heard it has some bugs, which yet I still have to encounter..
FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip fails
dumbl3 said:
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Click to expand...
Click to collapse
I'm on the same problem. Use FXP201 instead or wait until 203... The cm10-fxp202 doesn't work on my device too. Same procedure as Yours or update from 201 to 202 - all will fail on (my) nozomi.
Hello!
Hello! orange fix for this rom?if so, I would like to link to it? thank you very much :fingers-crossed:
Had same problem with fxp202 ans SSpeed rom.
Just try to install another kernel.
I had same problems with rom's above, I installed nova kernel nozimi and I have no problems anymore.
Sent from my Xperia S using Tapatalk 2
funky0308 said:
Had same problem with fxp202 ans SSpeed rom.
Just try to install another kernel.
I had same problems with rom's above, I installed nova kernel hikari and I have no problems anymore.
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
i got same plobrem with You.
Hello,
I have a problem updating my nozomi (xperia s) to the newest cm version. I always get error 7 - some symlinks failed and i cant install an update without factory reset / wipe user data. After this step i can install the zip, but without wipeing, always the same error.
When i'm installing updates on my girlfriend's urushi (xperia ray), everything works fine.
Any ideas?
Thanks
Enable signaturecheck in recovery before install. It worked for me.
Gesendet von meinem Xperia S mit Tapatalk 2
Make sure you flash the good .img before flashing the ROM !
alexdan2302 said:
Hello,
I have a problem updating my nozomi (xperia s) to the newest cm version. I always get error 7 - some symlinks failed and i cant install an update without factory reset / wipe user data. After this step i can install the zip, but without wipeing, always the same error.
When i'm installing updates on my girlfriend's urushi (xperia ray), everything works fine.
Any ideas?
Thanks
Click to expand...
Click to collapse
It's always recommend to wipe all (cache, davlink even system) then flash.
Be sure to mount system and then try.
And of course, check is you zip file o.k (maybe download again)
Even if you updating cm to new version it's best if you wipe.
I know that's lot of work, but only then you'll have good battery life, smooth and fast ROM and stability.
Sent from my LT26i using Tapatalk 2
Reinstalled apps and Data from googleserver after a datawiped update shoudn't be a Problem, or?
Gesendet von meinem Xperia S mit Tapatalk 2
I had just the same problem today. I installed cm10 from recovery and did everything you did!!!!
What i did to solve this prblem is:
- Went into recovery.
- wiped cache and dalvik.
- flashed the latest CM10 (FXP215 to be precise) again!!
- flashed gapps again!!
- after flashing both zips I wiped dalvik and cache again.
- Than reboot.
If you keep getting into bootloops, keep doing these steps. Beliefe me man I had the exect same problam today and this solved it . Just dont panic or do something stupid and have alot of patients! :good:
But this is not a so called clean install. I use factory reset to have a clean install or just wipe data partition. After 1st boot I restore only some of my saved data with titanium backup.
Gesendet von meinem Xperia S mit Tapatalk 2
i tried to go to recovery mode to install CM 11 which is KitKat of course but it keeps on failing..I can install any kind of rom that's jelly bean but when i try to install a kitkat rom, it won't let me. right now, i am using the latest CarbonRom Nightly and i'm trying to transition to CM 11. i did the factory reset, clear cache, and clear dalvik cache but it still won't work. what should i do? any help would be great! Thanks!
Are you running the latest TWRP or CWM? What errors are you getting? Is your bootloader compatible with the ROM?
So I installed the cm 13 nightly by ota from the 12.1 one and I flashed supersu without doing anything i.e. wipe data, wipe cache. and now its bootlooped what do I do now?:crying::crying::crying:
Hey there! I seem to have faced a similar error on my ZenFone too. I fixed it by doing a clean wipe of data, dalvik cache, cache and system.
After that, I flashed the latest CyanogenMod ROM for my device immediately followed by the latest GApps from the OpenGAppsProject and SuperSU 2.65. After that it takes around 3-7 minutes and then enters the "Optimizing Apps" page. Hopefully I helped you!