Related
Stuck on the samsung logo.
The battery drained dead, and I waited until I got home to charge it. I plugged it in and the grey battery popped up and a loading wheel, but it froze.
Now it doesn't turn on. I switched batteries and it goes to the samsung logo and sits there. I tried VolUP+VolDown+HOME+Power and All the other button combos and still nothing just goes to samsung screen and reboots, then I notice the led light flashes red very faintly and once quickly then the logo comes back up.
Any ideas?
Did you root or install custom recovery?
kirkla79 said:
Did you root or install custom recovery?
Click to expand...
Click to collapse
No I haven't tried to do anything of the sort. I just got this phone when it got released, and haven't explored that much with it yet. It just suddenly doesn't work after the battery drained dead.
I would just go back from where you bought it a get it exchanged then.
kirkla79 said:
I would just go back from where you bought it a get it exchanged then.
Click to expand...
Click to collapse
Yeah I'm just going to hate to lose everything because I couldn't do a backup...
Sucks.
Root install recovery and clear cashe partition and dalvik cashe. Use stock rom image with SU injected and do not wipe. Or exchange and loose everything
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
My girlfriend drained her battery until the phone shut off. Had to leave it on the charger for almost an hour before it would boot. I thought it should boot as soon as I plugged it in but that's not the case. Try letting it sit and charge for awhile.
jethro650 said:
My girlfriend drained her battery until the phone shut off. Had to leave it on the charger for almost an hour before it would boot. I thought it should boot as soon as I plugged it in but that's not the case. Try letting it sit and charge for awhile.
Click to expand...
Click to collapse
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
PrestigeA said:
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
Click to expand...
Click to collapse
Not sure your going to be able to root with a non-booting phone. Here are a couple links about rooting
Chainfire's method you need download mode
mrRobinson's root injected stock Roms, also need download mode
Good luck hope one of these works for you.
Just my $0.02 worth.
My suggestion is make sure you are using the original, Samsung battery. Let it charge for 8 - 10 hours. Take it off the charger, remove the battery from the phone, wait several minutes; then replace the battery and try to boot.
If that doesn't restore, I'd take it back to the store from which you purchased it, and see if a new, oem battery will let it boot. The store should try to do everything they can to help, short of replacing the phone. But it may just be your phone has gone bad -- in which case rooting isn't going to help...
Good luck.
PrestigeA said:
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
Click to expand...
Click to collapse
Intall CWM with odin then reboot in recovery and install stock rooted .zip or stock based ROM. Its called a dirty install. You can do this by placing the .zip in a microSD then install from external in CWM. You will end up with all your old crap but the .zip will replace your corrupted files. I recommend you save everthing as soon as it boots and yhen do a clean install of whatever ROM you want even if its stock.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
reinstalled stock ROM, stuck on logo
I recently got an AT&T note 2. I rooted and installed cwm recovery. I tried installing Android Revolution HD 5.0 after running their superwipe script. Everything went smoothly except the SIM was not recognized. I couldn't get it to work so I tried 2 other ROMs and I had the same issue. I decided to go back to stock and wait for Cyanogen to release a ROM.
The issue I am having now is that the stock ROM downloaded from http://forum.xda-developers.com/showthread.php?t=2004650 and another stock ROM (KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar) won't boot. I can successfully push them to the phone from Odin, but then they reboot and get stuck on the Samsung logo. The phone doesn't give any error messages, no strange leds on, no reboots, it just sits there with the Samsung logo pulsing. I can still boot into the download mode (vol down, home, power).
Any advice on how to get to a functoning ROM? At this point I don't care if it is stock or custom, I just need something that works. Any help would be greatly appreciated!
cdt710 said:
I recently got an AT&T note 2. I rooted and installed cwm recovery. I tried installing Android Revolution HD 5.0 after running their superwipe script. Everything went smoothly except the SIM was not recognized. I couldn't get it to work so I tried 2 other ROMs and I had the same issue. I decided to go back to stock and wait for Cyanogen to release a ROM.
The issue I am having now is that the stock ROM downloaded from http://forum.xda-developers.com/showthread.php?t=2004650 and another stock ROM (KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar) won't boot. I can successfully push them to the phone from Odin, but then they reboot and get stuck on the Samsung logo. The phone doesn't give any error messages, no strange leds on, no reboots, it just sits there with the Samsung logo pulsing. I can still boot into the download mode (vol down, home, power).
Any advice on how to get to a functoning ROM? At this point I don't care if it is stock or custom, I just need something that works. Any help would be greatly appreciated!
Click to expand...
Click to collapse
You should only flash ROMs from the "AT&T Galaxy Note II Android Development" section. I think Revolution HD is not an AT&T ROM, I don't know about the other ROMs you flashed (as you didn't say what they where). Those ROMs probably flash a non AT&T compatible radio on you phone. You should read and re-read and make sure you know what to do and what ROM can can flash before you start flashing.
Do you have a custom recovery installed, CWM or TWRP? Have you tried using a different computer and different cable?
Maybe try flashing the AT&T modem and them a correct ROM and see if that helps. Honestly, I'm not sure how to help you beyond that.
Good luck...
Back up and running
RojasTKD said:
You should only flash ROMs from the "AT&T Galaxy Note II Android Development" section. I think Revolution HD is not an AT&T ROM, I don't know about the other ROMs you flashed (as you didn't say what they where). Those ROMs probably flash a non AT&T compatible radio on you phone. You should read and re-read and make sure you know what to do and what ROM can can flash before you start flashing.
Do you have a custom recovery installed, CWM or TWRP? Have you tried using a different computer and different cable?
Maybe try flashing the AT&T modem and them a correct ROM and see if that helps. Honestly, I'm not sure how to help you beyond that.
Good luck...
Click to expand...
Click to collapse
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
cdt710 said:
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
Click to expand...
Click to collapse
Excellent, glad you were able to get it working.
Enjoy!
cdt710 said:
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
Click to expand...
Click to collapse
get yourself a jig dude, if you were really stuck you could have just put that badboy in and it would take you to dl mode, from there you could have odin'd yourself anywhere you wanted to. A thought for next time you get yourself into a situation you think isn't recoverable.
if you are a in a bloop you can usually get to recovery and from there sort yourself out. I know you are ok now, but this may still help someone else.
A jig is like a condom... protection even if you think you don't need it, you should prolly use it.
Issue
1. Phone won’t boot beyond the Samsung Logo.
2. It won’t boot into recovery (download mode works).
3. Can flash rom using Odin but phone still won't boot.
Type of Phone
Type: AT&T Samsung Galaxy Note 2
Model: i317
Ownership: Bought in Nov 2012 brand new. Warranty is up but it is insured through AT&T.
History: Rooted and then un-rooted and returned to stock in January 2014.
Actions leading up to Issue
Updated to Samsung’s newest firmware Android 4.3 but didn’t like it. I rooted my phone and tried a custom rom but wasn’t happy. Un-rooted by flashing original stock rom via Odin 3.07. Worked great and I was back in business. But then the phone went through an update and never booted back up.
Detail
I’ve rooted all my other phones but never felt the need to root this one until I updated to Samsung’s new Android 4.3. I wasn’t happy with the decreased battery life and poor performance. So I used the method at http://forum.xda-developers.com/showthread.php?t=2004650 to root my phone using “root66_ATT_I317UCALJ2.tar.md5” with Odin 3.07 and it worked. I then tried a custom Cyanogen Mod rom but it still left something to be desired.
After more research I flashed the original stock rom “KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5” via Odin 3.07 and my phone worked beautifully, at least for a day. Then I started getting the AT&T update window for Android 4.3 and the only way to get rid of it was to pull my battery. It was happening so much that I couldn’t even make a phone call. Out of pure frustration I decided to accept the update.
After the update installed it rebooted and never made it past the Samsung logo. So I figured I would just go into recovery and perform a factory reset as well as wipe the cache. The problem here is that it won’t boot into recovery. Only download mode works. I’m also seeing a red LED which I’ve read is a sign of SDS.
I’ve tried re-flashing the original stock rom again. Every time I do I get the green “Pass” display but my phone still won’t boot. The binary count is now at 21 since I’ve tried flashing so many times. I’ve been working on this and researching for 3 weeks. I’ve never had an issue that I couldn’t resolve when it comes to any of my past phones but this is beyond my skill or understanding. I also tried Samsung keys but it says my device is not supported.
Short of digging a hole in my back yard and burying it, is there anything I can do to fix this?
(Note) My wife has the same phone and also didn’t like the update so I flashed the same original stock rom to her phone via Odin and it has been working just fine. Only difference is I never rooted hers. I should have gone that route with mine.
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
josh3josh3 said:
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
Click to expand...
Click to collapse
Here's the link to TWRP (you want the Odin link toward the bottom):
http://teamw.in/project/twrp2/124
Here's the direct link to the latest philz cwm (you want the md5 file):
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
I prefer philz, but you will likely need TWRP to follow the dicksteele guide. You should also track down a CWM flashable recovery package for MH3 recovery to flash back should you need to return the phone for repairs. You can get this by following the i317 link in my sig.
If flashing this in Odin doesn't work that would tend to support the emmc fail scenario. (i.e. you flash it, Odin behaves as if it flashed ok, you power off, attempt to boot recovery with home-VolUp-power and it still doesn't boot). If it does boot recovery, you can try the guide as I mentioned before. Good luck!
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
josh3josh3 said:
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
Click to expand...
Click to collapse
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
So, there appear to be many people who see this update as a bad joke. Like me.
I had a thread a couple days ago about how to kill the notification from att
Without root. Nothing can be done as far as ive heard/seen. Im a bit confused
About needing a battery pull to remove pp note, I have been just reboot and it
Goes away until next data use/net access. When my 8 hrs is up I turn data on
(Data off as 8hrs expires) and immediately get note and then I hit home- get
another 8 hrs. Im sorry to hear they wore you down with the note- im going to
fight and resist for the duration. And keep stock. Its a game now!
R, john
qkster said:
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
Click to expand...
Click to collapse
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
josh3josh3 said:
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Click to expand...
Click to collapse
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
dicksteele said:
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
Click to expand...
Click to collapse
Have tried that many times with no luck. Wish it were that simple.
josh3josh3 said:
Have tried that many times with no luck. Wish it were that simple.
Click to expand...
Click to collapse
Have you tried this yet ?
http://forum.xda-developers.com/showpost.php?p=49826416&postcount=9
Zen Arcade said:
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
josh3josh3 said:
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
Click to expand...
Click to collapse
That would be the Thanks button by the Quote...
OUTSTANDING !!!
Glad you're back among the living.
This will get you back to 4.1.2
http://forum.xda-developers.com/showpost.php?p=49616718&postcount=2
EDIT:
I just did this and it worked perfectly .....
I'm actually doing that step right now also. I flashed back to stock testing the ATT update server.
EDIT #2:
At this step when the phone reboots the script will run. When it completes you want to boot to system. The next prompt will be do you want to install ROOT. If you do the swipe it will install ROOT, there is a DO NOT INSTALL button on the middle of the screen. Just a heads up, don't know if you are turning your phone back in or not now.
- Second step is:
You will need to download TWRP 2.6.3.1 and flash it in ODIN.
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
This is necessary for an openrecovery script to run that is stored in the /cache directory from the update.
- Put your Note 2 in Download Mode.
- Open ODIN, put openrecovery-twrp-2.6.3.1-t0lteatt.img.tar in PDA slot. Click Start and let the phone reset.
- Your phone will reboot in TWRP. If not, pull battery and enter recovery mode boot into TWRP recovery (HOLD VOL UP+HOME+POWER). The script will run by itself.
sgh-i317 EFS seems like its gone
could anybody help me out with my note 2. ive tried just about everything i can think of. im getting pretty desperate. i can get everything to work fine (recovery,download mode,) but something is keeping it from booting up to the main screen, it will just hand at the boot animation, or the att logo. in twrp it tells me failed to mount efs. ive looked around in the file folders and its like it got wiped out? im not sure how though. could that be why its not booting up?
any ideas??
Okay, so here is my issue. I returned to stock, downloaded network update, it rebooted my phone, and did the update. Phone went to reboot again, and was hung up on the "Samsung Galaxy Note II" screen. After about an half an hour I pulled the battery, and tried to reboot. Same thing. I rebooted into Download mode and flashed the stock .tar file as described in this thread. The Odin flash goes great and the phone reboots when it is done. Then it just sits on the Samsung Galaxy Note II" screen. Never goes past it. Does anyone have any ideas on how to get this working? Any help is much appreciated. I have tried to search the forums for an answer, but I could not find anything that matched my issue.
John
John.Spence1 said:
Okay, so here is my issue. I returned to stock, downloaded network update, it rebooted my phone, and did the update. Phone went to reboot again, and was hung up on the "Samsung Galaxy Note II" screen. After about an half an hour I pulled the battery, and tried to reboot. Same thing. I rebooted into Download mode and flashed the stock .tar file as described in this thread. The Odin flash goes great and the phone reboots when it is done. Then it just sits on the Samsung Galaxy Note II" screen. Never goes past it. Does anyone have any ideas on how to get this working? Any help is much appreciated. I have tried to search the forums for an answer, but I could not find anything that matched my issue.
John
Click to expand...
Click to collapse
Need more info.....
Return to which stock ??
Have you seen this?
http://forum.xda-developers.com/showthread.php?t=2618447
As of know, any stock would be better then what I have. I would like to return to the stock rom that came with the phone. I believe it is the J2 one. I am going to try that thread that you mentioned, and see if I can get anywhere. If that does not work, I think I might this thread here. Thanks for the reply...
John.Spence1 said:
As of know, any stock would be better then what I have. I would like to return to the stock rom that came with the phone. I believe it is the J2 one. I am going to try that thread that you mentioned, and see if I can get anywhere. If that does not work, I think I might this thread here. Thanks for the reply...
Click to expand...
Click to collapse
Sounds good. The first link should do you. The J2 will be the 4.1.1. Following the guide you can OTA to 4.1.2.
Holler if you need help.
EDIT:::: I just did the ODIN to LJ2, booted perfectly. OTA to MH3 4.1.2 worked great.
This step is mandatory !!
There a step that need to be done to get the install to complete successfully for the i317UCAMH3 OTA.
- Download from http://d-h.st/CDK
I317UCUBMK6-TZ-PARAM.zip
- Extract the .zip file to get to I317UCUBMK6-TZ.tar.md5
- Put your Note 2 in Download Mode.
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Open ODIN and place the I317UCUBMK6-TZ.tar.md5 file in PDA and flash.
Phone will now boot into i317UCAMH3.
So I guess the issue was that I went from 4.3 to 4.1.1, and my phone didn't like it. Flashed the prama and tz file. It rebooted and went straight into 4.1.1 with no issues... Thanks
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
John.Spence1 said:
So I guess the issue was that I went from 4.3 to 4.1.1, and my phone didn't like it. Flashed the prama and tz file. It rebooted and went straight into 4.1.1 with no issues... Thanks
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Excellent.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you
Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.
Can I unroot in the future if I want to go back to stock?
Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN
Thank you. One last question, any chance using Odin will brick the device?
Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.
Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.
I have been away from my Note two for over 2 years since I had my beloved Note 4. Well the 4 kicked the bucket the other day so I had to fire my Note two back up.
What is the newest greatest rom I can put on this. I am still running stock Kit Kat 4.4.2 .
I would like the best newest rom for the the Note two with root and tether. Also a good kernel with battery life.
One problem I am having is every time I Odin TWRP it says complete but I can not get it to come up (volume up,power and home) and it also takes my cell coverage away. I get a red x where the signal bars are. Any help please with some step by step directions
Thanks
joetarney said:
I have been away from my Note two for over 2 years since I had my beloved Note 4. Well the 4 kicked the bucket the other day so I had to fire my Note two back up.
What is the newest greatest rom I can put on this. I am still running stock Kit Kat 4.4.2 .
I would like the best newest rom for the the Note two with root and tether. Also a good kernel with battery life.
One problem I am having is every time I Odin TWRP it says complete but I can not get it to come up (volume up,power and home) and it also takes my cell coverage away. I get a red x where the signal bars are. Any help please with some step by step directions
Thanks
Click to expand...
Click to collapse
take a look at the Note 2 Android Development thread, there are plenty of roms from Stock KitKat based to nogut 7.1.1 aosp.
also when you flash TWRP via Odin make sure that "auto reboot" is unchecked in Odin, and let it flash till it finishes and wait for a while then disconnect the phone and remove the battery and insert it again then try reboot into recovery.
I have never had a problem flashing twrp 3.0 but every time i do on this note 2 it never works. The volume up, power and home and it just stays at the Samsung logo forever. When i restart it, it goes to the normal home screen but i get a red x where my signal bars are and i have no cell signal.
If i use kies to get back to my regular rom i have signal no but still no twrp.
Any help would be much appreciated. Thanks
All i want is the newest greatest rom for note 2 with tether.
joetarney said:
I have never had a problem flashing twrp 3.0 but every time i do on this note 2 it never works. The volume up, power and home and it just stays at the Samsung logo forever. When i restart it, it goes to the normal home screen but i get a red x where my signal bars are and i have no cell signal.
If i use kies to get back to my regular rom i have signal no but still no twrp.
Any help would be much appreciated. Thanks
All i want is the newest greatest rom for note 2 with tether.
Click to expand...
Click to collapse
Ok, i have another option, download latest KingRoot.apk and install it in your phone, and then root it using that app, after it finishes it should say that your phone was successfully rooted, now download latest TWRP 3 but in image format (.img) not (.tar), and install Flashify app from play store, now open flashify and in flash section choose "Recovery Image" and then "choose a file" and locate the TWRP you downloaded and flash it, now it should say success and ask you if you want to reboot into recovery, press "OK" or "yes" or "let's go".. don't actually remember, but you will get it.
Thanks for helping .
I did everything you said and I am now rooted but when I go to that fly site and try to download any of the twrp it says ...
"something went wrong downloading please try again later" I have done this multiple times and keeps saying the same.
I have never had so many problems putting twrp on my phone.
Thanks again
joetarney said:
Thanks for helping .
I did everything you said and I am now rooted but when I go to that fly site and try to download any of the twrp it says ...
"something went wrong downloading please try again later" I have done this multiple times and keeps saying the same.
I have never had so many problems putting twrp on my phone.
Thanks again
Click to expand...
Click to collapse
i can attach it here, are you using n7100 or n7105?
MigoMujahid said:
i can attach it here, are you using n7100 or n7105?
Click to expand...
Click to collapse
Excuse my ignorance but where do I find that?
Software - QA1
SPH-L900
4.4.2
joetarney said:
Excuse my ignorance but where do I find that?
Software - QA1
SPH-L900
4.4.2
Click to expand...
Click to collapse
Oh, i get it now, you are using Sprint note 2 device.
the model number is SPH-L900, i thought you have international version like the N7100 or the N7105.
anyway here you are the TWRP 3.0.2.0 image for the SPH-L900.
sorry, it's a zip file, extract it and you will get the recovery image, I couldn't upload the image directly because i get "error grabbing file.." it's a bug in the XDA Labs i guess.
You are awesome , got it to work . Thanks
Now I have to figure out what to flash.
joetarney said:
You are awesome , got it to work . Thanks
Now I have to figure out what to flash.
Click to expand...
Click to collapse
more good news
your phone has its own development thread
https://forum.xda-developers.com/note-2-sprint/development/