few ? the phone is unlocked my problem is why it wont allow data to work no calls text internet.etc it reads my sims shows my sprint number shows bars tried changing the apn settings to sprint but when saving it it disappears i thought wen the phone is unlocked it work with any carrier thanks for any info that yall can give me
And you have flashed the correct baseband and made any needed APN changes ?
Simply unlocking the device will not get you connected to another carrier without setting up the device properly after unlock...g
Related
HELP! 4g LOST / not working
THE SHORT OF IT: I flashed a custom ROM & kernel. They didn't work properly, so I flashed my nandroid to get back to rooted stock. NOW I HAVE NO 4G or signal of any kind (wifi works)!!!!!!
THE LONG OF IT:I'm in South Korea using the Galaxy Note 2 on the carrier LG with their U+ LTE service. As far as I could see and have been told my phone ONLY uses 4g (no 3g or other options to check). I was advised to flash a Tmobile or ATT Rom (I chose the Tmobile AOKP) as our U+ phones don't have their own Roms & Forums and I flashed a custom kernel from sjkoon a developer posting kernels that work for our phone. Others have done the same thing and reported no problems. After flashing, the new Rom & kernel, the phone booted in the Google startup helper I could not gain access to any signal or wifi to access or create a gmail account.
So, I nandroided back to stock (rooted, mind you, using chainfire's exynos exploit) but my 4g won't work, only wifi does. So, I have NO way to make/receive calls. I've verified a number of pieces of information through various avenues and have the following:
PHONE INFO
My Access Point Names says "LG U+" with "internet.lguplus.co.kr" underneath. There is no option to change it or edit it, just a radio button with no other options (is this is fine?). I was advised in another forum (http://forum.xda-developers.com/showthread.php?p=36895160#post36895160) to change mmsc's value to http://omammsc.uplus.co.kr:9084, but I dont' know where that option is to change it, or if this is a problem.
I also used the the "Phone Info" app and got some of these readings:
In Telephony, have a Device ID, my Network type is 3, Sim State 5, it shows I have a SIM operator and country, Serial Number Subscriber ID, etc. The only things that MAY be strange (I don't know what their original values should be) are that Call State, Data Activity and Data State are all 0 and my Network Operator Name, Network Operator and Network Country ISO are just blank. Even if I wanted to change any of these I have no idea how...
PLEASE HELP & THANK YOU!
It's strange. I spent the night/morning searching forums for a solution but not sure exactly what to do. Please, help me or point the way to fix this issue if you know how and thank you very much. I'm willing to buy you a beer or buy your newest app, say thanks on all your posts for the next month, whatever! Hehe. ...:crying:
Hi, and firstly, thanks to any and all who offer their knowledge to assist my conundrum.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
If anyone has any insights, it would be GREATLY appreciated. Thanks!
-Luke
did you check and/or setup the apn? it may be just the apn is not set correctly or you have to manually input hte apn
sounds like just APN needs setting...
APN?
How would I check/setup the APN? Is this to allow me to do a full reflash to a stock ROM or to access data with the phone in it's current state?
left ownsho
So I went into ACCES POINT NAMES and checked the sp.telus.net box, no change. Did a restart. No change Any ideas?
Wooooo Hooooo!!!
So, it's working now!!! I dug a little deeper and found the correct APN settings for TELUS. NOW IT F*@^&#*&@ING WORKS!
Thanks so much for pointing me in the right direction!!!
Hi,
I got a N900T from Canadiamgsm.... it's supposed to be unlocked.
I followed the instruction, charged and turn on with my wind canada sim... It does not call because of sim non registered (no service) ...
I tried from mobile network to select wind, but on right top I saw a circle with a bar in the middle... after some attempts with network mode and the way of selection for networks I had the normal bar that shows you've service, but when I try to call sim non registered again.
and a shield is on the left with written prevention information
an application has been forced to stop for an unauthorized attempt to access the system in your device
I did NOT install anything and I did NOT update android at all, it's on 4.3
Can I check if it's rooted and in case install a custom rom? Would it help or would it back to locked network that is even worse?
Thanks
My friend brought an original refurbish Samsung N910v android version 5.01 which was working with GSM 2G if not 3G until when I tried to update to new version android v6.0.1. In the menu>setting>about when I checked first before anything it showed me N910 F v5.01 but in boot mode Odin it was N910v.The problem started when I just typed *#9090# the phone immediately started reboot loop. I have managed to unlock the boot loader and root the phone installed custom rom version 6.0.1 by Paul Pizz rom VRU2CPJ2.r-1 but still can not have 2G or 3G GSM network. Please help to revive the phone again whether it meant to go back to 5.0.1 that would work with gsm cause am full stack now.
Have you checked to ensure you have the APN information in place? I have a Galaxy Note 4 N910V now (just got it a few days ago) and when I put my T-Mobile SIM in it from the very first time I have to manually put in the APN data - on custom ROMs it's usually picked up and there automagically but not always so, my suggestion is that you check to make sure your APN information is currently there as it should be.
Settings - More - Cellular networks - Access Point Names - make sure the one you need to be using is selected and if it's not then you'll have to put that info in manually and save it.
As for the actual model number, take the battery out and see what the model number is on the sticker in the battery compartment area - if the sticker isn't there then it could be a device that someone has done some experimenting with because that info can be changed. The sticker should be there, of course, but sometimes people take 'em out when they're mucking around with stuff, who knows.
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
gruka said:
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
Click to expand...
Click to collapse
The APN will be your network. Are trying to use Verizon? If so, you should have a spot to tic the VZWINTERNET. If not, then you have a sim card issue.
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
gruka said:
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
Click to expand...
Click to collapse
Is the sim from verizon? If you have a good account go to a corporate store and have them give you a new one. It's free.
Also, what are your APN settings and I will compare to mine. Everything works on mine.
the fone I have came from china ,am in Africa and remember I told you it was working woth N910f firmware version 5.0.1.All am asking is there anyway I could make this fone work again on Gsm network, cause all it says after re flash is the card is not from verizon
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
gruka said:
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767122226
- N910VVRU2CPJ2_FullFirmware_NoAboot<--- Full Framework with no aboot so you will not re-lock bootloader, but will unroot and restore back to 100% stock. once your on the full stock check if your connections are working fine, if they are then install custom rom, otherwise change the sim card
go in settings, connections and select network mode to global, should be fine
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
ackaite said:
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
Click to expand...
Click to collapse
Did you set the APN information correctly?
Also are you using the N975U1 firmware or the standard AT&T firmware?
Are you using the BYOD sim card from straight talk?
What have you done over the phone with Straight Talk as far as troubleshooting? - this one can be important. If the phone isn't working with straight talk only it maybe a configuration (apn setting) or provisioning issue.
Are you sure the device is compatible with the area or region your in?
What provider/tower (Verizon, AT&T, etc.) does straight talk have you going through?
More information on what you have done to setup the phone for straight talk, troubleshooting steps you have taken, what information straight talk may have provided (etc. etc.) will help others be able to help you. Providing little or no details makes it rather hard to offer any help.
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
ackaite said:
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
Click to expand...
Click to collapse
Straight Talk uses different mobile providers to offer service different areas.. They utilize Verizon, AT&T, Sprint and T-Mobile (Sprint and T-Mobile have merged recently, but Sprint towers are still active).
I have seen posts across the internet that indicate you should be using the U1 firmware on the phone.. I would make sure your converting the phone to the U1 firmware properly.
If I recall correctly (this is how I did it previously) when flashing the U1 firmware make sure your doing it without the sim card installed and using the non home_csc file. Factory data reset the phone after you successfully flash the U1 firmware and then insert the sim card after setting the phone back up (so it can apply the new sim/network settings).
I would strongly suggest you do not restore a backup during initial setup when you do this. If you restore a backup it may restore previous network settings/configurations that were for what you had previously.
If flashing U1 firmware doesn't help (and since this this is a Straight Talk specific issue) then it's more then likely on the end of Straight Talk. I would call them and make sure that your sim card is the correct one for the cell towers they have you going through and the phone you have. Using an incompatible sim card (or one that is faulty) can cause issues like this. You can also have them send you another sim card to try.
Also contact them to make sure the service is properly provisioned and activated on your phone. Double check the APN with them, and see if they have an alternative one to try. It is also possible that a service outage maybe (or issue with Straight Talk internally) in your area, so I would call them to make sure that neither are not the case here.
ackaite said:
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
Click to expand...
Click to collapse
The Global setting doesn't really matter in this case and your phone will be set to use the towers that Straight Talk has you going through.
The only thing that I can think of that would be a problem with network mode is if your sim card from straight talk is meant for a different provider then the towers they use in your area (i.e. sim card is for AT&T but the provider they have for the area is Sprint).
the straight Talk sim works in other phones no problem a s8 and a older note im thinking att has something in the software to block other apns i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
ackaite said:
the straight Talk sim works in other phones no problem a s8 and a older note
Click to expand...
Click to collapse
I would not use older phones as a means to say the sim card is good. Besides that's irrelevant to what is going on with the Note 10+
ackaite said:
im thinking att has something in the software to block other apns
Click to expand...
Click to collapse
Then this means one of two things... Either you didn't get the phone unlocked or else you did not convert to another carrier (or the U1 firmware XAA region) correctly.
If your using the unlocked firmware (U1 XAA region) then you should be able to edit the APN. If not then you should be able to create one.
ackaite said:
i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
Click to expand...
Click to collapse
That sounds like either the sim card isn't good, the phone was not activated/provisioned properly in there systems (call them and double check IMEI and model information), the phone is not compatible with the service they offer in your area (I suggest using the XAA region U1 firmware in this case) or else your phone is not fully unlocked.
I would also suggest google searching or else asking them for any updated or alternative APN's to try. It maybe very likely the one you have is not suitable for the phone/area... It wouldn't be the first time I have had an issue similar to this like this.
I am opt to believe the first 3 are the most likely scenarios since the phone works on Verzion with the sim card per your indication.
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
ackaite said:
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network
Click to expand...
Click to collapse
From personal experience I would advise in the future you don't do that. When you activate the phone you should activate the one you are using and definitely do not use an older phone to activate a newer phone. I have had many problems with this in the past as provisioning for an older phone didn't always work for my newer ones..
ackaite said:
when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
Click to expand...
Click to collapse
I waited for you to give more information on the issue, but you didn't. So I am sorry, but if you don't provide the details of what is going on it makes helping you very difficult. You didn't say what error you are getting, what the firmware version(s) are of what your trying to flash and what is currently on the phone.
Here's the last piece of help I can offer now.
I can tell you that the following can be found on the forum by searching:
Links and how to obtain the firmware - Multiple threads asking the same question exist here. Also Frija, SamFirm, SamMobile are just a few examples of what can be found referenced here.
Bootloader version(s) - what will happen when you try to downgrade and what will happen (along with a important thing) when you upgrade.
Websites to find firmware - SamMobile and some others have been mentioned.
Patched Odin - In case you need the latest version it has been mentioned here already.
I can also tell you that by using Google and searching for SM-975U1 XAA on Sammobile does in fact work.
Brother give me root file for note 10 plus SM-N975U android 10 version one Ul version 2.5 plz help me