Develop Bugs

[Q] Device won't connect to any network

Hi, I have an SGH-I747M that was originally purchased through Bell. In an attempt to unlock to make it work on Koodo, I went through SamMobile (after reading there was no way to unlock post 4.3 OTA update) and that seemed to half work.They resell a service from 123unlock.nl which is a client that uses adb or something of the sort to mess with phone files. The program afterwards said "Your phone is now unlocked! However if you don't see any carriers you need to do something in the advanced option and pay another $2x.xx dollars to do so". I didn't feel like giving them any more money at this point because I was upset that what I originally paid for didn't work properly. The fix was apparently an option in the advanced options that was an NVM repair/rebuild or something of the sort. I should have screenshotted the issue but of course didn't.
Now, the phone will boot up and does not offer me a SIM unlock option anymore. When searching for carriers it will ever only find Rogers for some reason. It won't recognize Koodo or Telus or anything of the sort (or bell when my bell SIM is in). Every now and then when it boots up, it will successfully send a text but only within a 5-10 second time frame after boot (I've made 1 phone call as well for 3 seconds). I've tried the Koodo SIM in my own Nexus 5 and works fine so the network is okay at least (plus I called Koodo and they verified on their end things look good... if that makes a difference). The SGS3 won't even accept an original Bell SIM at this point. It's always on either no network, 1 bar or full bars, never anything in between. I've tried flashing different ROMs from Bell stock to Koodo stock and CM11 and it won't work no matter what I do. Under all ROMs it pops up an "ME Returned temporary error" message on the screen.
I'm hoping someone might have seen this issue before or know what's going on with the phone that I can fix. I'm assuming it's something to do with the modem part of the phone that's refusing to connect to carriers but I'm at a loss to fix it. I haven't tried flashing different modems on it yet because I'm unsure which one would be a good fix and no one has had roughly the same issue I could find in 3 days of Googling for this issue. Any ideas are greatly appreciated. Thanks.

sgtcanadian said:
Hi, I have an SGH-I747M that was originally purchased through Bell. In an attempt to unlock to make it work on Koodo, I went through SamMobile (after reading there was no way to unlock post 4.3 OTA update) and that seemed to half work.They resell a service from 123unlock.nl which is a client that uses adb or something of the sort to mess with phone files. The program afterwards said "Your phone is now unlocked! However if you don't see any carriers you need to do something in the advanced option and pay another $2x.xx dollars to do so". I didn't feel like giving them any more money at this point because I was upset that what I originally paid for didn't work properly. The fix was apparently an option in the advanced options that was an NVM repair/rebuild or something of the sort. I should have screenshotted the issue but of course didn't.
Now, the phone will boot up and does not offer me a SIM unlock option anymore. When searching for carriers it will ever only find Rogers for some reason. It won't recognize Koodo or Telus or anything of the sort (or bell when my bell SIM is in). Every now and then when it boots up, it will successfully send a text but only within a 5-10 second time frame after boot (I've made 1 phone call as well for 3 seconds). I've tried the Koodo SIM in my own Nexus 5 and works fine so the network is okay at least (plus I called Koodo and they verified on their end things look good... if that makes a difference). The SGS3 won't even accept an original Bell SIM at this point. It's always on either no network, 1 bar or full bars, never anything in between. I've tried flashing different ROMs from Bell stock to Koodo stock and CM11 and it won't work no matter what I do. Under all ROMs it pops up an "ME Returned temporary error" message on the screen.
I'm hoping someone might have seen this issue before or know what's going on with the phone that I can fix. I'm assuming it's something to do with the modem part of the phone that's refusing to connect to carriers but I'm at a loss to fix it. I haven't tried flashing different modems on it yet because I'm unsure which one would be a good fix and no one has had roughly the same issue I could find in 3 days of Googling for this issue. Any ideas are greatly appreciated. Thanks.
Click to expand...
Click to collapse
Can you check your phone's settings => About Device and let's know what parameters you have there (Android Version, Baseband Version, Build Number>.
You mentioned you can send text or make call within a limited time frame. Was that with the Koodo SIM or the Bell? If the former, it would suggest the phone is unlocked to some extent but you are probably experiencing a baseband failure or need to correct the APN settings. Did you also try doing a factory reset?

Larry2999 said:
Can you check your phone's settings => About Device and let's know what parameters you have there (Android Version, Baseband Version, Build Number>.
You mentioned you can send text or make call within a limited time frame. Was that with the Koodo SIM or the Bell? If the former, it would suggest the phone is unlocked to some extent but you are probably experiencing a baseband failure or need to correct the APN settings. Did you also try doing a factory reset?
Click to expand...
Click to collapse
The information you're asking for is attached.
The texts I got off were from the Koodo SIM. I have updated the APN as well, and I did do a flash back to stock resetting all settings through Kies emergency update. I found a little trick where if you softbrick it by trying to flash 4.1, it'll give you the "Please use kies" error and that'll take you back to full stock 4.3. I'm pretty sure the baseband failure is the option I need to explore but at this point I don't know where to go to fix this.
Edit: I read this online and tried it: "The 4.3 update introduces a "security feature" which requires carrier- or region-locked phones to be activated once on the original locked network before the unlock code will work." The phone didn't recognize any network with the Bell SIM in except "EXT" which I've never heard of before and it did not connect properly so that didn't work. I also read that inputting #7465625*638*# will give me the Samsung SIM unlock menu which it did however I don't think the issue here is with the root and I'd hate to pay $50 at this point to have that not work as well.

sgtcanadian said:
The information you're asking for is attached.
The texts I got off were from the Koodo SIM. I have updated the APN as well, and I did do a flash back to stock resetting all settings through Kies emergency update. I found a little trick where if you softbrick it by trying to flash 4.1, it'll give you the "Please use kies" error and that'll take you back to full stock 4.3. I'm pretty sure the baseband failure is the option I need to explore but at this point I don't know where to go to fix this.
Edit: I read this online and tried it: "The 4.3 update introduces a "security feature" which requires carrier- or region-locked phones to be activated once on the original locked network before the unlock code will work." The phone didn't recognize any network with the Bell SIM in except "EXT" which I've never heard of before and it did not connect properly so that didn't work. I also read that inputting #7465625*638*# will give me the Samsung SIM unlock menu which it did however I don't think the issue here is with the root and I'd hate to pay $50 at this point to have that not work as well.
Click to expand...
Click to collapse
It's unlikely to be the regional lock as this feature means your phone will work with compatible networks in the region but not in other regions. You may, however, run Chainfire's Region Lock Away to be sure <http://forum.xda-developers.com/showthread.php?t=2470551>
Your firmware settings look OK so I'd be doubtful about a corrupted modem. You may still try to re-flash the modem via custom recovery. Download link for the CWM flashable zip is available here ... http://www.androidfilehost.com/?fid=23252070760973552
The guys who sold you the original code seem to have sold a dud as there is no reason for them to be asking for secondary payments and this sounds like the footprint of a regular scam. I'd be surprised though as they seem to be well rated

Larry2999 said:
It's unlikely to be the regional lock as this feature means your phone will work with compatible networks in the region but not in other regions. You may, however, run Chainfire's Region Lock Away to be sure <http://forum.xda-developers.com/showthread.php?t=2470551>
Your firmware settings look OK so I'd be doubtful about a corrupted modem. You may still try to re-flash the modem via custom recovery. Download link for the CWM flashable zip is available here ... http://www.androidfilehost.com/?fid=23252070760973552
The guys who sold you the original code seem to have sold a dud as there is no reason for them to be asking for secondary payments and this sounds like the footprint of a regular scam. I'd be surprised though as they seem to be well rated
Click to expand...
Click to collapse
I've tried reflashing the modem and I've actually paid $50 for the unlock code from Bell, the original carrier. I used the code to get the network unlock menu and inserted the code. I still get between 1-4 bars now with no network access on either network. It's not showing anything except Rogers still in network operator selection.
Any ideas at this point? It refuses to connect to any networks. I'm out of options.
Edit: I don't know if this makes a difference, but when I do root explorer I can't actually find the nv_data.bin file. It doesn't have anything of the sort in the /efs folder.

sgtcanadian said:
I've tried reflashing the modem and I've actually paid $50 for the unlock code from Bell, the original carrier. I used the code to get the network unlock menu and inserted the code. I still get between 1-4 bars now with no network access on either network. It's not showing anything except Rogers still in network operator selection.
Any ideas at this point? It refuses to connect to any networks. I'm out of options.
Edit: I don't know if this makes a difference, but when I do root explorer I can't actually find the nv_data.bin file. It doesn't have anything of the sort in the /efs folder.
Click to expand...
Click to collapse
Please let me understand a few things ... when you first acquired the phone, was it working normally on Bell prior to the first unlock attempt or you never used it at all until you tried Koodo? Secondly, was the unlock code you got from Bell identical to the one you got from the online service?
I'm trying to establish if it is a case of hardware failure not reported by the previous user especially if you bought it pre-owned from the secondary market. If you are not sure of the previous usage history, it could be a faulty or disconnected antenna which may require professional service. On the other hand if you are sure it was working fine prior to the unlock attempt, try the following ...
1) From the dial pad, enter *#197328640#
2) [1] UMTS
3) [1] DEBUG SCREEN
4) [8] PHONE CONTROL
5) [6] NETWORK LOCK
6) [3] PERSO SHA256 OFF
7) Press Menu => Back button and go all the way back to Step 3) above
8) [6] COMMON
9) [6] NV REBUILD
10) [1] NV REBUILD
Reboot and restart and let's see if this does it.

I've got a similar symtom different scenario (sister in-laws phone). I was also only able to see Rogers network on a search. I've got Telus version. It was working fine until it was brought to the Philippines, got unlocked there and brought back to Canada.
I was only able to see Rogers network until I went into the Service Menu (similar to above) and found the option to change the band. I changed it to Automatic. After that I was able to see Telus network. When trying to connect/register it would take a long time and give me an error "Unable to connect, try again later". I still need to do more troubleshooting, but that might be something to look at.
Note: Phone has stock MOD ROM, rooted and unlocked.

Use Verizon note 4 on AT&T

I got Verizon Note 4.
Verified that it is unlocked. Not stolen. No contract binded from Verizon store and through phone (Clean phone)
Android Version : 5.0.1
Location: Las Vegas
Insert AT&T sim card. No signal.
Change APN setting following the information on AT&T website. Still not working. No signal.
At&t store rep. said I need to l unlock the phone ( I already check with Verizon via phone and store)
Verizon rep. on phone said: I should be able to use the phone with At&t sim card
Verizon Rep. in store said : Galaxy note 4 won't work on AT&T. It needs to be rooted by an expert. Only Galaxy S5 or later version will work.
I searched websites and many say that they are using Verizon Note 4 on AT&T network (At&t sim card)
I just need to use phone and text message. No data needed.
Anybody can help me?

I was able to use SIM from AT&T before yesterday, but after trying to update the firmware using Software Upgrade Assistant tool on Windows 10, it's now stuck at 'searching for service'.

Did you change the network settings from global to lte/GSM?

I am reading this. Maybe a solution.

Did you try to insert a different carrier sim card and entering the unlock code?
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
After reading post i see you have a att sim sim on verizon phone. This could be a problem as verizon and att dont play nice. Stupid question is did you actually pay for service?

cozmohoot said:
Did you change the network settings from global to lte/GSM?
Click to expand...
Click to collapse
I did. Not working

It is not working. No verizon sim card message is gone but still no signal.
sam369 said:
I am reading this. Maybe a solution.
Click to expand...
Click to collapse

Yes I did. Not working
cozmohoot said:
Did you change the network settings from global to lte/GSM?
Click to expand...
Click to collapse

dayse said:
It is not working. No verizon sim card message is gone but still no signal.
Click to expand...
Click to collapse
Yeah. Me either.

Did you do a factory reset after software update. Usually helps. Also mess with APN settings. Reboot after changing APN.

Problem solved.
Changing APN settings and reboot did not work. I just inserted the Verizon SIM came with the phone and made a phone call. Of course it's not activated, so I hang up when it reached Verizon automated system. Guess what, now SIM from Lycomobile works. H2O Wireless SIM also works. It means that it now can work with AT&T and T-Mobile network.

sam369 said:
Problem solved.
Changing APN settings and reboot did not work. I just inserted the Verizon SIM came with the phone and made a phone call. Of course it's not activated, so I hang up when it reached Verizon automated system. Guess what, now SIM from Lycomobile works. H2O Wireless SIM also works. It means that it now can work with AT&T and T-Mobile network.
Click to expand...
Click to collapse
I'm in a similar boat as you (4.4.4 on Cricket Wireless, wanting to upgrade to 5.1.1). I just want to make sure I understand what you did to restore service:
1. You had phone working on AT&T with an older Android version (KK?)
2. You upgraded to a newer version via the Verizon upgrade tool (I assume 5.0.1 since 5.1.1 is not yet available via the tool)
3. You lost AT&T service after upgrade
4. You were able to restore AT&T service by using an inactive Verizon SIM and making a phone call
Is this correct? TIA

ftkftw said:
I'm in a similar boat as you (4.4.4 on Cricket Wireless, wanting to upgrade to 5.1.1). I just want to make sure I understand what you did to restore service:
1. You had phone working on AT&T with an older Android version (KK?)
2. You upgraded to a newer version via the Verizon upgrade tool (I assume 5.0.1 since 5.1.1 is not yet available via the tool)
3. You lost AT&T service after upgrade
4. You were able to restore AT&T service by using an inactive Verizon SIM and making a phone call
Is this correct? TIA
Click to expand...
Click to collapse
Mostly, except that I tried to upgrade from 5.0.1 to 5.1.1, but found that 5.1.1 was not yet available via the tool, but the process of installing the software on windows 10 and maybe I also used the Verizon SIM during the process which might have messed something up. I updated the firmware to 5.1.1 by downloading the zip file in a thread here and flashed it through recovery. The network connection problem was then solved by making a phone call with the SIM came with the phone.

sam369 said:
Mostly, except that I tried to upgrade from 5.0.1 to 5.1.1, but found that 5.1.1 was not yet available via the tool, but the process of installing the software on windows 10 and maybe I also used the Verizon SIM during the process which might have messed something up. I updated the firmware to 5.1.1 by downloading the zip file in a thread here and flashed it through recovery. The network connection problem was then solved by making a phone call with the SIM came with the phone.
Click to expand...
Click to collapse
I just updated via the Verizon tool (BPA1 finally showed up) and it was, surprisingly, perfectly fine. I first backed up as much as I can (via Smart Switch and Helium app), then pulled my mSD card, left my SIM card in the phone, and proceeded to update. After the first boot stuff (app optimization, etc.) I soon saw the AT&T sign in the notification bar, and I was able to make a phone call without doing anything else. With all the reports of SIM card locking after updating I was worried that I might run into the same issue, but was pleasantly surprised that I didn't. I had to re-enter the APN setting as the upgrade seemed to have removed it, but after re-adding Cricket's APN I was able to get cellular data as well.
Thanks again for your help

You need to access the hidden menu and change your radio and modem protocols. There's a forum on XDA called domestic and internation sim or network unlock for spring but should work the same on verizon

fyi, i got my note 4 working on gsm using 2 different freedompop sims-the at&t lte sim gets lte via band 4.
the global sim based on t-mobile did get hpsda+
just change the apn

I need help on samsung note 4 N910v

My friend brought an original refurbish Samsung N910v android version 5.01 which was working with GSM 2G if not 3G until when I tried to update to new version android v6.0.1. In the menu>setting>about when I checked first before anything it showed me N910 F v5.01 but in boot mode Odin it was N910v.The problem started when I just typed *#9090# the phone immediately started reboot loop. I have managed to unlock the boot loader and root the phone installed custom rom version 6.0.1 by Paul Pizz rom VRU2CPJ2.r-1 but still can not have 2G or 3G GSM network. Please help to revive the phone again whether it meant to go back to 5.0.1 that would work with gsm cause am full stack now.

Have you checked to ensure you have the APN information in place? I have a Galaxy Note 4 N910V now (just got it a few days ago) and when I put my T-Mobile SIM in it from the very first time I have to manually put in the APN data - on custom ROMs it's usually picked up and there automagically but not always so, my suggestion is that you check to make sure your APN information is currently there as it should be.
Settings - More - Cellular networks - Access Point Names - make sure the one you need to be using is selected and if it's not then you'll have to put that info in manually and save it.
As for the actual model number, take the battery out and see what the model number is on the sticker in the battery compartment area - if the sticker isn't there then it could be a device that someone has done some experimenting with because that info can be changed. The sticker should be there, of course, but sometimes people take 'em out when they're mucking around with stuff, who knows.

Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please

gruka said:
Initially the phone is from Verizon but was working on 2G ,3G GSM network with N910F firmware version 5.0.1.it was working on airtel network until when I wanted to update. May I have the Apn settings,please
Click to expand...
Click to collapse
The APN will be your network. Are trying to use Verizon? If so, you should have a spot to tic the VZWINTERNET. If not, then you have a sim card issue.

ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon

gruka said:
ziggy the how do i sort out the sim card issue ,Since phone says this sim card is not from verizon
Click to expand...
Click to collapse
Is the sim from verizon? If you have a good account go to a corporate store and have them give you a new one. It's free.
Also, what are your APN settings and I will compare to mine. Everything works on mine.

the fone I have came from china ,am in Africa and remember I told you it was working woth N910f firmware version 5.0.1.All am asking is there anyway I could make this fone work again on Gsm network, cause all it says after re flash is the card is not from verizon

I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work

gruka said:
I now rooted this n910v android version 5.1.1 still no network, am in Africa where there is 2G&3G GSM network, how would I make this fone to work again with the gsm network now that I rooted. On the network bar I get a circle with a cross ,how to make this work
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767122226
- N910VVRU2CPJ2_FullFirmware_NoAboot<--- Full Framework with no aboot so you will not re-lock bootloader, but will unroot and restore back to 100% stock. once your on the full stock check if your connections are working fine, if they are then install custom rom, otherwise change the sim card

go in settings, connections and select network mode to global, should be fine

Verizon Note 8...T-Mobile sim - help

Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks

Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.

kdecoteau1 said:
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
Click to expand...
Click to collapse
I would like to know where to get the firmware and with what do you flash it with? Is there a instructions thread or link.
It's been over 5 years since I have tinkered with a Samsung device.

Hi there. You'll need to have your Note 8 Bootloader version on level 2, meaning 2BQK2, 2BQJA or anything with 2 before the last 4 digits.
1) tmobile SIM card in device
2) Odin v3.12.7 make sure extract
3) 2BQK2 firmware extract all files
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC.
Odin and firmware https://androidfilehost.com/?fid=673791459329067572 2BQK2
https://androidfilehost.com/?fid=962157660013069130 2BQL5
https://drive.google.com/open?id=1bRz4RQzmloSgsuYmyLu92cktT_f8hIYp
Unlock firmware
1) any carrier SIM card
2) Odin v3.12.5 Prince Comsey or modified Odin, make sure extract
3) 2BQK1 firmware, extract all files.
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC
Odin and firmware https://androidfilehost.com/?fid=745849072291691586 2BQK1
https://androidfilehost.com/?fid=817906626617955896 2BQL2
https://drive.google.com/open?id=1Lw79Q5npvMRdME33-ioqy692ClZ36n4U
First instructions is for if you want stock US CARRIER BLOATWARE FIRMWARE, second instructions is if you want SAMSUNG STOCK FIRMWARE. Follow steps and everything will be fine, happy flashing.

So wait, I have a Verizon Note 8 (currently using MetroPCS perfectly), but I wanted a stock Samsung ROM (without the Verizon crap on it), I can just flash the second set of files instead and done with it?

Yes

Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.

So much misinformation in this thread.
I don't even know where to start:
The OP was asking why his T-Monile SIM wouldn't work. It doesnt matter which firmware you're on, if the Note 8 is unlocked (the Verizon Note 8 IS unlocked), and it has a clean IMEI, and your SIM is already activated, then it will get 4G LTE. I know. I have a Verizon Note 8, and use it on Tmobile. I used it for over 24 hours with my T-Mo SIM but running thr Verizon firmware with no issues. Only reason I flashed T-Mobile firmware was to rid myself of Verizon bloat and to get wifi calling.
As far as bootloader, that has no effect on the SIM card working. The OP would need a v2 bootloader firmware if his current firmwarealso had the v2 bootload. It probably does, so thats a moot point, but the implication was the v2 bootloader was the only one that would make his SIM work.
I hope the OP got it all figured out.

mmdpkaaa said:
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Click to expand...
Click to collapse
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
unitop4 said:
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
Click to expand...
Click to collapse
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...

BlueFox721 said:
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
Click to expand...
Click to collapse
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.

Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
Another user had SIM issues and flashed back to factory (theirs was unlocked) then changed carriers and SIM worked again...sometimes a clean flash can work...

Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.

kdecoteau1 said:
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
Click to expand...
Click to collapse
How did you get ATT N8 to work on VZW? I flashed my Tmo to VZW and i could never get speeds above 1mpbs. Even with unlocked firmware it did not get anywhere with VZW. I heard that its because the IMEI is not in VZWs database.

Hi there. My AT&T Note 8 works great on Verizon network, it's running the latest N950U1 Firmware 2BQL2, everything works great. It will work good on T-Mobile too, lately tmobile network giving trouble, sometimes less than 1 mbps on download. Since June 2017 I been having trouble with tmobile network in my area and around, so I switch to Verizon, couldn't bother the crappie service. My location I get 215 mbps on my note 8, IPhone 8 plus 147mbps download. I prefer Tmobile but it's not working good in area anymore.

[/COLOR]
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.

Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will performing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Nevermind, I fixed it. I had to perform the carrier switch and flash Tmo's firmware. Running perfectly!

Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Omg exacly whats happening to me? So what steps have you guys followed? Should I switch to T-mobile, or to factory unlocked?
I have Verizon phone, unlocked, and I use T-mobile sim card.
I would appreciate the help
Sent from my SM-N950U using Tapatalk

Verizion note8 with tmobile sim card
This is what happened when I changed carriers from the original verizon note8, on verizon network, with verizon sim and the most recent verizon pie update, to a carriers sim, that is tmobile service. And what happens, I didn't even think was possible... I put the new carriers sim in, truconnect, booted and let the phone register the new sim and network. Checked for update.... the was one, let the phone download and update. And you know how Verizon's boot logo is... it wasn't anymore. Booted the tmobile boot logo and sounds, strange. I'm not super noob and the little bit of knowledge and experience that I do have with roms and updates across carriers usually require physically flashing the rom. Correct me if I'm mistaking. Continuing.... optimizing apps....., huh?! The update flashed the tmobile software, without effecting any personally installed apps. Though the update did remove all the verzion software/bloatware, without permissions, and installed tmobile apps. 2 that are meant for user usage. They are tmobiles device unlock and the tmobile app. Which I might add, do not function, I surmise, because in not on the actual main tmobile network, but a scabbed on. I have never seen or experienced anything of the short. Please tell me if this is normal.? I was a bit upset. I did not give any carrier the permission to delete or install any app on my phone. But maybe things have changed since I dabbled. And If they have, maybe this might help the people that have been using Odin to get tmobile version rom while originally being a verzion phone. I dont think it's normal. Please tell me if this has happened to you.

Help with getting volte working on non ATT S9

Hey can anyone give me advice on how to get volte to work on my unlocked s9? I've flashed everything from the ATT rg7 folder including the att userdata file and still no volte. The software tells me I should have it but nothing will enable or work. I even tried putting another s9 (actual att model) imei number on that phone numbers account and still no go. What am I missing??? I must be missing something.... I'm at a loss.

dajmanjt said:
Hey can anyone give me advice on how to get volte to work on my unlocked s9? I've flashed everything from the ATT rg7 folder including the att userdata file and still no volte. The software tells me I should have it but nothing will enable or work. I even tried putting another s9 (actual att model) imei number on that phone numbers account and still no go. What am I missing??? I must be missing something.... I'm at a loss.
Click to expand...
Click to collapse
So do you have all the AT&T Apps? Also the only way to get the imei of the the AT&T phone to stick in AT&Ts system is to have them set it while you are using the AT&T phone.