Trying to Odin twrp and it wont stick.
I am on OJ6
Figured alls I would have to do is odin twrp latest version 2.8.7.0 and
using either odin version 3.07 or 3.10.7
Cant seem to get it to work in 3.07 using pda option or 3.10.7 using AP option....
EDIT: I also did this and nothing. when you Odin TWRP, uncheck auto reboot and when you get the success confirmation, pull USB and battery, wait 30 seconds and boot into recovery (tried twrp no go, was able to get back into the onboard recovery)
Odin results:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
EDIT 2: Thanks all for your help...Figured out!!!! Had to odin N910PVPU4COJ6_N910PSPT4COJ6_SPR.zip to go back to stock...even tho i took the ota to OJ6. once i did this i was able to get recovery to flash. Now i am running stock rooted!
THIS THREAD CAN BE CLOSED
Related
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
When you do that you have to pull the battery and go into recovery and wipe factory data reset. And then you should be fine. And I think you are in the wrong section for this sir.
Sent from my SGH-T889 using xda premium
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
Of course after odin is finished.
Sent from my SGH-T889 using xda premium
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Can you get in to revovery? if so do full wipe and se if it helps. Have you tryed to flash CWM recovery through Odin? http://forum.xda-developers.com/showthread.php?t=2028103
And if you have one, have you tryed to recover an old CMW backup. You could also try to find a Odin Rom that is split into 3 files and a pit file, and do pit format. They should be out there. Hope you get your Note back up running.
Dude can you go into download mode? If you can the phone is recoverable if not, say goodbye and send to samsung, just say you have no idea what happen
---------- Post added at 10:15 PM ---------- Previous post was at 10:12 PM ----------
You probably flashing the oficial samsung fw, dont worrie the phone is not bricked dude, just enter in download mode power, then fast hit home + volume down if you can get in download mode menu the phone is ok
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
4.1.2 -> 4.1.1?
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Aah! downgrading from 4.1.2 to 4.1.1 . You need to wipe else will get stuck in samsung screen. Just go into the recovery mode (keep vol-up,home and power button till you reach the samsung screen,then release power button but keep other 2 button pressed till you reach recovery.Then wipe/reset. Reboot and you should be good to go.
Click to expand...
Click to collapse
im an average user when it comes to rooting. flashed a new rom and then kernel and then ended up with bootloop. i didnt make a backup. we used kies 3 and smart switch for emergency firmware update, it finish the whole installation but when it comes to restarting the device it is still stuck on bootloop. after that we have tried flashing factory image including pit file. the firmware were tried to flash is G925TUVU3DOI1_G925TTMB3DOI1_TMB.ZIP and G925TUVU2DOH6_G925TTMB2DOH6 from sam mobile. halfway through installing the firmware we saw the cute android logo and then it says erasing.
the download mode now says
odin mode
[roduct name: sm-g925t
current binary: custom
system status: custom
frp lock off: off
secure download: enabled
knox warranty void: 1 (0x0304) tripped knox long time ago trying to root it. nothing bad happened
AP SWAREV: B:3 K:2 S:2
factory recovery mode says efs not mounted. were able to push files through adb fastboot.
would gladly appreciate if anyone can help us. thankyou
I noticed you said you tried to flash a .zip file through ODIN. I'm not sure if that normally works, but everything I flash through ODIN is a .tar or .tar.md5 file. There is a link to download the full stock DOI1 firmware somewhere on here. Find it and try to flash that, and then re-root using UniKernel.
Edit: Here is the thread with the DOI1 firmware file. Be sure to thank @Alex9090 for posting it.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/g925tuvu3doi1-download-mega-t3221088
Akw6190 said:
I noticed you said you tried to flash a .zip file through ODIN. I'm not sure if that normally works, but everything I flash through ODIN is a .tar or .tar.md5 file. There is a link to download the full stock DOI1 firmware somewhere on here. Find it and try to flash that, and then re-root using UniKernel.
Edit: Here is the thread with the DOI1 firmware file. Be sure to thank @Alex9090 for posting it.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/g925tuvu3doi1-download-mega-t3221088
Click to expand...
Click to collapse
i apologize. the initial factory firmware i flashed was an md5. i also tried the zip through the twrp.
i just tried it again. its the same thing. odin says
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
after that the android logo showed up saying "installing system" with 1/3 of the loading bar. then immediately says erasing.
godefroy28 said:
i apologize. the initial factory firmware i flashed was an md5. i also tried the zip through the twrp.
i just tried it again. its the same thing. odin says
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
after that the android logo showed up saying "installing system" with 1/3 of the loading bar. then immediately says erasing.
Click to expand...
Click to collapse
Hm. It looks like the ODIN flash didn't fail, which leads me to believe the firmware you flashed was somehow bad. Maybe try downloading the firmware from a different site? But if you got it from Sammobile, it should be good though. Curious. I still recommend trying a different download. Short of that I have no more suggestions. Sorry I couldn't be of any more help. I hope you get it figured out.
I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Try using an older version of odin like 1.85 and also make sure the downloaded rom is ok.
I did that.I used like 3 different versions of odin and 2 stock roms with different regions.No effect.I have flashed TWRP back again so atleast some functionality is restored
Ok seems lik a partition issue. Try using an appropriate pit file.
gambitflash said:
I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After Flashing The Stock Firmware Through Odin And Recieve Error MEssage Take Of the battery and put it back
Now go to download mode
Connect your phone
open odin
flash cwm or twrp using odin
when flashing is completed your phone is restart at this point Press Vup+Home+Power
Now Recovery is open
dont do anything except restart
it may ask for rooot then install it
now again go to recovery mode and flash custom rom using recovery
hope it works
Hello everybody !
I bought a Note 4 N910A unlocked on amazon but I have now a problem after an failed attempt to go 6.0.1.
My version was the DOI2 (5.1.1.) but I couldn't succed via flashing in recovery mode (update via sd impossible) neither with Odin (stuck at the beginning of the system bar).
I tried several official rom via Odin (N910AUCU2DOI2, N910AUCU1COC4, N910AUCU2COC6...) but same thing : stuck at the beginning of the system bar.
I tried also with a pit file and a nand erase all, but it's not working.
I have no access to recovery, only download mode.
Here is the rapport :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do know...
Thanks for you help !
PS : the phone is under warranty but maybe I can find a way before going to the store (in 2 weeks). And I would prefer not use a root way too, unless I have to ^^
Once you were stock to begin with, you should NEVER have to use a PIT file (unless you found some way to change the partition sizes).
Looking at that log, I suspect the issue is with your data cable or PC. I'd recommend trying this on another PC and data cable (just to be sure). It is unlikely that your device is one of those with a defective NAND chip for storage.
Thanks for answer and it worked with an another cable :good:
I'm now in COC6 (5.0.1) and I'm wondering if I can make an update with Odin to go directly in 6.0.1 or I need to make all the others updates?
I have to do all the wipes first?
Thanks for your advices!
Ok,
So I am trying to fix my dads phone which stopped working over the weekend and am at a total loss. The phone will ONLY boot into odin download mode. You can turn it on normally, can't get into recovery mode. I have already tried to flash the lastest stock TAR via odin and it installs fine, except nothing changes, still no recovery or boot.
OS I installed: G920PVPS4DQE2_G920PSPT4DQE2_G920PVPS4DQE2_HOME.tar.md5
ODIN Report
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Duplicate Post