I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Try using an older version of odin like 1.85 and also make sure the downloaded rom is ok.
I did that.I used like 3 different versions of odin and 2 stock roms with different regions.No effect.I have flashed TWRP back again so atleast some functionality is restored
Ok seems lik a partition issue. Try using an appropriate pit file.
gambitflash said:
I was on resurrection remix rom and I wanted to go back to the stock rom.So I downloaded the firmware for my region from stockroms.net and tried flashing it in ODIN.The problem is that odin gives a fail error when it reaches the end of the system.img file.I don't know what to do here,please help.Here is the progress report from odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After Flashing The Stock Firmware Through Odin And Recieve Error MEssage Take Of the battery and put it back
Now go to download mode
Connect your phone
open odin
flash cwm or twrp using odin
when flashing is completed your phone is restart at this point Press Vup+Home+Power
Now Recovery is open
dont do anything except restart
it may ask for rooot then install it
now again go to recovery mode and flash custom rom using recovery
hope it works
Related
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
raolemo said:
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
Click to expand...
Click to collapse
Try pressing Ctrl+Alt+Delete and go to "Processes" and search for the following process :"KiesTrayAgent.exe","Kies.exe","adb.exe"
If you seen that all in the processes of your PC/Laptop , Make sure to end that all process before proceeding up with Mr.Odin
Because mine i've flashed my DXLA1 Firmware because i always encountering SD Card issues so i ended up downgrading my DXLA1 to my Factory Firmware DXKK4
In this way , Mr.Odin helped me
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
install some other version... kill kies / adb processes... make sure ur cable is fine
got it right
there was some problem with the kies splitted files so downloaded the firmware from from another source n now got it working thx guyz
So I've been screwing around now for somewhere around 7 hours trying to figure out how to root the s4. I've tried both the motochopper and odin methods on pc and mac and every time i end up with the same errors. I've followed the instructions word for word and tried again with after wiping the phone of all its data. heres the log for odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
Then motochopper seems to run smooth, but then says:
Rooting phone...
This may take a few minutes.
Failure.
Cleaning up...
Exploit complete. Press enter to reboot and exit.
Press any key to continue...
Any ideas? I have the SGH-M919 T-Mobile version.
did you do the ota update before you tried to root? I did, and had to oden back to the stock m919uvuamdb version, then motochop, then flash a recovery of your choice, then you can flash any of the roms, custom or stock+root. thru recovery. I think maybe now there is an updated stock with root avail,
and make sure you follow directions for unzipping and placing the .tar in the right place (pda) and uncheck all but reboot
If you've updated then you are UVUAMDL, follow this
http://forum.xda-developers.com/showthread.php?t=2268880
Also, there is a a problem flashing CWM or TWRP. Just be sure to read the first 4 pages of that thread
Alternate method which I did on MDL:
1) Odin OUDHS Recovery, download SuperSU cwm zip from link in thread: http://forum.xda-developers.com/showthread.php?t=2260031
2) Then cwm rebuilt kernel with root restriction removed: http://forum.xda-developers.com/showthread.php?t=2271976
3) In the same session cwm the SuperSU zip mentioned in #1.
Can you log into a root shell?
Sent from Spaceball One.
Solution
You need to flash t Mobil kernel to get root and root thrue cwm method
So I try to root (Following the instructions) and this happens
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
What do I need to do? Flash the stock firmware? Do a Kies Emergency whatever?
Reboot your computer, use usb ports on the back (#1 on a laptop), use a known good cable. Reflash a stock Rom, then try the auto root again. Or, flash the no trip root in mrRobinsons thread. Both will root. And I would recommend Odin version 3.07. Several people have reported success using the older 1.8x versions, but I like the newer one for the newer phones.
this worked for me
Are you running Windows on a Mac using vmfusion? That could be the problem, try Odin with a windows computer, it worked for me
I have a Chinese Galaxy Tab pro 8.4 sm-t321, trying to flash TWRP recovery on it using Odin. I have rooted the device using CFAutoroot through Odin.
I downloaded twrp-3.1.1-0-mondrianlte.img.tar and used Odin v3.12.
Odin manages to install correctly (i think?) and it shows "Pass!"
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
But trying to boot into recovery mode fails and it boots into odin mode:
Could not do normal boot.
ODIN MODE
...
UDC START
Could someone tell me what i did wrong? How do it get TWRP to install correctly?
I just want to install google play on it and the guide I read needed TWRP to install Open GApps.
Many thanks
hello
googleplay on googleplay site
regards
Hi all,
I flashed twrp, and tried Lineage and Hades roms. Experienced 'no cellular network' problem and decided to revert back to stock Oreo rom.
When i tried to flash with Odin, it failed. Tried to reinstall Odin, different country roms but nope
(Running Hades rom with no cellular network now)
Here is the log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5039 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ushuaia said:
Hi all,
I flashed twrp, and tried Lineage and Hades roms. Experienced 'no cellular network' problem and decided to revert back to stock Oreo rom.
When i tried to flash with Odin, it failed. Tried to reinstall Odin, different country roms but nope
(Running Hades rom with no cellular network now)
Here is the log:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5039 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're updating the older firmware, since the latest update in July can not be downgraded, so you need the latest firmware as possible. Tell me the firmware code you're trying to flash, and I'll give you a hand
thanks for the reply @AntoKemz
here it is:
AP_A720FXXU3CRF3_CL13876027_QB18708253_REV00_user_low_ship_meta.tar.md5
BL_A720FXXU3CRF3_CL13876027_QB18708253_REV00_user_low_ship.tar.md5
CP_A720FXXU3CRE2_CP9638362_CL13561022_QB18043607_REV00_user_low_ship.tar.md5
CSC_OJV_A720FOJV3CRF3_CL13876027_QB18708292_REV00_user_low_ship.tar.md5
i just checked from updato by the way. there is a newer version for me. i started to download and will give it a try.
ushuaia said:
i just checked from updato by the way. there is a newer version for me. i started to download and will give it a try.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/
Ok man, this is the latest version, so you should solve .. download from here https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/ sammobile is the fastest currently to download compared to the other site.
AntoKemz said:
https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/
Ok man, this is the latest version, so you should solve .. download from here https://www.sammobile.com/firmwares/galaxy-a7-2017/SM-A720F/XME/download/A720FXXU5CRH3/237351/ sammobile is the fastest currently to download compared to the other site.
Click to expand...
Click to collapse
latest version solved the problem. thanks a lot
ushuaia said:
latest version solved the problem. thanks a lot
Click to expand...
Click to collapse
Nothing I'm glad you solved it, I went there too. Next time use the tanks button ^^