my phone shows blinking bot error when start or in recovery mode too
It starts to happen when i was trying to wipe cache n before completed i restrated my phone
now when i try it in fastbot method but adb doesnt detect my phone on PC even all drivers are installed properly
PLEASE NEED HELP!
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Same happened to me today after newest ota update
Same thing happened to me..64gb 4gb ram version Now it won't even get past first recovery menu to be able to wipe it... Don't know what to do and don't have a computer.
Related
hi good day..
i was trying to update my rom to opendesire 3.1.1.. so i connected my usb cable and flashed it. but while wiping i had an error. it said cant open /cache/recovery/command. i just ignored it and then while i was trying to flash, my connection from my pc to the phone just got disconnected. so i restarted my phone and tried to flash again. but when i tried to run the recovery-windows.bat file, it just wont start.. i hope you could help me asap! thanks
another thing.. when i plug my phone to the pc it automatically lights up and it gets stuck on the htc logo..
help please.. thanks
ryanpaul said:
hi good day..
i was trying to update my rom to opendesire 3.1.1.. so i connected my usb cable and flashed it. but while wiping i had an error. it said cant open /cache/recovery/command. i just ignored it and then while i was trying to flash, my connection from my pc to the phone just got disconnected. so i restarted my phone and tried to flash again. but when i tried to run the recovery-windows.bat file, it just wont start.. i hope you could help me asap! thanks
Click to expand...
Click to collapse
hi, dont worry about that, I had it too now that you are trying to flash a ROM onto the phone, I am guessing that you are rooted.. to load a ROM you need a ClockworkMod. if you can still get onto your phone (call people and actually use the phone), get ROM Manager, you should see Install clockworkmod, or something like that, just let it download it and instll (don't interrupt!) and try going into recovery (vol down +power button, recover, then you should be able to use your track ball to navigate and install from SD, that worked for me )
pm me if you need further help
uhmmm.. i cant use the phone its stuck on the htc logo.. did i brick it? i tried to go to my cmd prompt ant tried to type in adb devices. it looked like this.
List Of adb Devices
it just blank i cant see my phone.. is it bricked?
UPDATE!!
1.i tried to root the device again but at step 2 i got stuck because the device wasnt found.
2. i thought it was usb bricked so i went to a page here in xda developers "[DEV] USB-BRICK FIX - Restore USB function on your bricked Desire". while i was getting my cid. it suddenly booted (i didnt do anything but set it into fastboot and typed 'fastboot oem boot') and it ran the stock 2.1 rom. so i tried rebooting into recovery but to no avail.. it still cant detect the device when i run the recovery-windows.bat
any ideas?
Hi had all different roms on my DHD and settled on Ice cold sandwich which it has been running for a few months now, earlier on today I noticed that it had gone off and only the backlight was on, So I restarted it and it started loading the screen up but then just went into a loop.
So i pulled the battery and went into recovery and reloaded the ICS rom, but know it just vibrates 5 times and shows the splash screen and goes off with just the backlight on again.
I can get into fastboot but when i press the button for recovery it does the same I've tried every pd98img I could find and it says wrong image after I try and load them.
And when I connect it to the pc it can't be recognised by htcsync or thru any adb commands, and windows tried to load a driver called Q_USB-DLOAD or something similar then loads a qualcom usb driver but adb commands still won't recognise it, been looking all bnight for an answer getting desperate.
Thanx in advance Michael
1. Remove your sd card and try to boot up again if it boots up then there might be something corrupted on your sd. (Possible sd may have gone bad)
2. Try to enter hboot with power button and volume down at same time to see if you can get into hboot. If it dont your boot img may be damaged and you may need to push it again thru ADB.
3. If you can get into recovery try full wipe and reflashing rom. (You may have to use an adapter to get rom on to sd since computer dont see phone then place sd back in phone)
These are just a few ideas you can try hope it helps.
EDIT: Also there is no need to create a double post of the same issue. This is what causes clutter among the forum. When you post a question you need to wait for an answer not ask again when there is no reply on your first post. Thank you
my device Ze551ml with 4gb ram and 64 storage
Now is brick with stuck usb logo,how can i fix my ZF2 .
I do not know my firmware vers and when i connected to laptop on device manager i found moorefield but i can't driver or software for this.
please any one help me to get my ZF2 ok.
please step by step how to do it...
thank.
What did you do?
Are you able to get into FASTBOOT? Please see the following: http://www.asus.com/us/support/FAQ/1011956/
Sincerely,
ASUS_USA
my Zenfone2 get brick
rlaw said:
What did you do?
Click to expand...
Click to collapse
At the first time i use my Zf2 ask to software apgrade from asus so i do it.
next going to upgrade app,but after that much of the app make my phone runing lack,like litle noising on camera,sim1 not deteckt profider and some other.
so i need to reset on recovery mode-after that i go to clear chace partition.on this step the problem begin,my ZF2 is black ,,,,waiting to long so i go to manual boot its became blink android robot.
go to recovery page its became yelow text "like unmount chace ,image,etc".so i let it for some time and try to reboot again my scren stuck to usb logo its happens till now.
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
Which supersu zip did you use? V2.46?
So after accidently wiping everything I had on both SD and Internal memory trying to make a custom rom work, I was stuck with a phone that only has TWRP on it, basically. Now after I've been through this guide TO THE LETTER: http://www.droidviews.com/install-stock-android-marshmallow-lg-g3-d855-using-twrp-recovery/ I can see it installed an OS but I cant seem to get my phone to load it! SO then I tried entering recovery mode and getting back to default, it didn't change anything, so I tried installing Zoe rom (https://forum.xda-developers.com/lg-g3/development/zoe-rom-v1-0-mm-6-0-stock-v30a-d855-t3402087) and It STILL ONLY LOADS TWRP even though the installation seemed to be successful!
So what do I need to do? Just flat out delete TWRP? or what? Pleas advise as I'm desperate. If needs be, redirect me to how to just completely reinstall everything from scratch to 6.0 or 7.0 (preferably). I was on 4.x.x for ages and I just wanted to update, instead destroyed my phone. Sigh.
UPDATE: Another thing I've tried is to flash it with KDZ file from the PC. I can see the phone, I can transfer files to it, but windows DOES NOT recognize in the device manage so when I tried to use the flash tool, after clicking "Start" it pops a new window which gets to 60% and then stops saying the phone is not connected to the pc.
Malkishua said:
So after accidently wiping everything I had on both SD and Internal memory trying to make a custom rom work, I was stuck with a phone that only has TWRP on it, basically. Now after I've been through this guide TO THE LETTER: http://www.droidviews.com/install-stock-android-marshmallow-lg-g3-d855-using-twrp-recovery/ I can see it installed an OS but I cant seem to get my phone to load it! SO then I tried entering recovery mode and getting back to default, it didn't change anything, so I tried installing Zoe rom (https://forum.xda-developers.com/lg-g3/development/zoe-rom-v1-0-mm-6-0-stock-v30a-d855-t3402087) and It STILL ONLY LOADS TWRP even though the installation seemed to be successful!
So what do I need to do? Just flat out delete TWRP? or what? Pleas advise as I'm desperate. If needs be, redirect me to how to just completely reinstall everything from scratch to 6.0 or 7.0 (preferably). I was on 4.x.x for ages and I just wanted to update, instead destroyed my phone. Sigh.
UPDATE: Another thing I've tried is to flash it with KDZ file from the PC. I can see the phone, I can transfer files to it, but windows DOES NOT recognize in the device manage so when I tried to use the flash tool, after clicking "Start" it pops a new window which gets to 60% and then stops saying the phone is not connected to the pc.
Click to expand...
Click to collapse
I just got over something like this this morning. First, you need to ensure you have the LG Universal drivers installed for your phone. Get them here.
Next, reboot your machine.
After this, I made sure the PC recognized all 3 modes of my phone, TWRP mode (boot to TWRP, connect), Download Mode (boot to download mode with cable) and, at least in my case, the flashing lights mode (shows up as QHUD Bulk or something).
After that, I ran the KDZ restore program successfully.
Good luck and let me know how it goes.