my device Ze551ml with 4gb ram and 64 storage
Now is brick with stuck usb logo,how can i fix my ZF2 .
I do not know my firmware vers and when i connected to laptop on device manager i found moorefield but i can't driver or software for this.
please any one help me to get my ZF2 ok.
please step by step how to do it...
thank.
What did you do?
Are you able to get into FASTBOOT? Please see the following: http://www.asus.com/us/support/FAQ/1011956/
Sincerely,
ASUS_USA
my Zenfone2 get brick
rlaw said:
What did you do?
Click to expand...
Click to collapse
At the first time i use my Zf2 ask to software apgrade from asus so i do it.
next going to upgrade app,but after that much of the app make my phone runing lack,like litle noising on camera,sim1 not deteckt profider and some other.
so i need to reset on recovery mode-after that i go to clear chace partition.on this step the problem begin,my ZF2 is black ,,,,waiting to long so i go to manual boot its became blink android robot.
go to recovery page its became yelow text "like unmount chace ,image,etc".so i let it for some time and try to reboot again my scren stuck to usb logo its happens till now.
Related
Hello,
I have no way top do anything to the phone..manually or with PC.... :crying:
just run a system update by asus and zenfone 2 got stuck on asus logo.. I followed the instruction to clear the cash, but now the phone gets the dead android symbol with ERROR. I connected it to PC but ADB does not find the device. ( updated the usb drivers on pc in device manager and I see the ASUS Android Device and below ASUS Android Bootloader Interface.. but still ADB will not find it... HELP anyone ?? Thanks... Fabio ( Vienna Austria)
I have been trying to read on forums, etc.. but I see that people with similar issue get answers like.. connect phone, download so and so on phone, set phone for usb debugging, etc,,. BUT the phone is not seen when connected to a PC..
I have no way top do anything to the phone..manually or with PC.... :crying:
how to proceed from here ? What is ASUS doing on this ? I try to find ASUS service in Austria but cant find it.
Thanks
go into bootloader, use fastboot.exe to command "fastboot erase cache" without quotes.
fbarga said:
Hello,
I have no way top do anything to the phone..manually or with PC.... :crying:
just run a system update by asus and zenfone 2 got stuck on asus logo.. I followed the instruction to clear the cash, but now the phone gets the dead android symbol with ERROR. I connected it to PC but ADB does not find the device. ( updated the usb drivers on pc in device manager and I see the ASUS Android Device and below ASUS Android Bootloader Interface.. but still ADB will not find it... HELP anyone ?? Thanks... Fabio ( Vienna Austria)
I have been trying to read on forums, etc.. but I see that people with similar issue get answers like.. connect phone, download so and so on phone, set phone for usb debugging, etc,,. BUT the phone is not seen when connected to a PC..
I have no way top do anything to the phone..manually or with PC.... :crying:
how to proceed from here ? What is ASUS doing on this ? I try to find ASUS service in Austria but cant find it.
Thanks
Click to expand...
Click to collapse
What did you do? You tried to flash something through tethered recovery?
You can try to press and hold power to turn off the phone.
Then press power and volume up, when there is vibrate, release the power, hold the volume up till you see asus logo. Wait and you are in fast boot. press down and choose recovery.
when you see the dead android and !, press power and volume up then quickly release them both. Now you can wipe cache.
demonntl said:
You can try to press and hold power to turn off the phone.
Then press power and volume up, when there is vibrate, release the power, hold the volume up till you see asus logo. Wait and you are in fast boot. press down and choose recovery.
when you see the dead android and !, press power and volume up then quickly release them both. Now you can wipe cache.
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I had tried everything.. but the dead Android with ERROR does not go away. I gave up and went to a handy shop to see if they can restore the system. In the end there are many little things and tricks you need to knowI and if you have not the experience, maybe it is better to use a technician.
i let you guys know what they did.
Thanks again...
By the way... STAY AWAY from EGLOBAL CENTRAL. 3 days later and after emails, etc.. no reply what so ever... great customer service ( company in Honk Kong, phone from UK ( never answered ) and website for every nation...germany, Ausztria, etc.. but nobdy to talk to... )
I accidentally formatted bootloader, and now my device unable to detect,boot or anything. Is there anything I can do of ?
(might try everything to work it out )
Can you boot into the preloader with volume up and power pressed?
flash ROM via FlashTool
BlueFlame4 said:
Can you boot into the preloader with volume up and power pressed?
Click to expand...
Click to collapse
no, i could not
Kittehdispenser said:
no, i could not
Click to expand...
Click to collapse
Sounds like a hard brick, which means your phone is destroyed. What exactly did you do?
BlueFlame4 said:
Sounds like a hard brick, which means your phone is destroyed. What exactly did you do?
Click to expand...
Click to collapse
welp, i tried to install custom rom ( which need to download the rar and paste it into INTERNAL) but i accidentally paste it to my SD card. Then i start to install it.
Then i said it's uninstallable, I just restart my phone and everthing went normal buy my wallpaper screen turns black and unable to read it tho USB ( Just the standby screen shows wallpaper)
Then my brothers came out and said that all you need to do is format it again and reinstall. We tired countless times . But then it have another option which above Format everything but not bootloader and another is Format everything and bootloader.
Then my bro press it and ... It became bricked.
it's still warrantyable so .. I plan to play dumb to the warranty company if I can't fix it.
( even if i play dumb idk what reason I need to come off, if i say yesterday the battery from 70% drop to 0% then it unable to open again )
PS: before this happen my battery happens from 70% drop to 0%, after charged. it's fine
PPS: give me a good excuses to play dumb C::
Wait, wait. How did you format the bootloader? No recovery should have this option! The only possible option to hard brick the P8000 is to pull out the USB cable in the exact moment when the SPFlash Tool writes it. So, can you elaborate a bit more about what you've done? I'm pretty sure you're missing something.
Soft Bricked HTC Desire 616
BlueFlame4 said:
Wait, wait. How did you format the bootloader? No recovery should have this option! The only possible option to hard brick the P8000 is to pull out the USB cable in the exact moment when the SPFlash Tool writes it. So, can you elaborate a bit more about what done? I'm pretty sure you're missing something.
Click to expand...
Click to collapse
Hi,
I did something similar with my HTC Desire 616. I choose "Format All + Download" option with SP Flash Tool. The phone soft bricked. Later I tried "format whole flash (including bootloader)". It's still soft bricked...
Is there a way to revive my phone back??? :crying:
I had the same problem - but it is possible to set the phone to a special bootloader mode called META mode - see this video: https://www.youtube.com/watch?v=A3TmXtOA0IA
To do so you have to open the phone and disconnect the battery. You can find a howto easily on youtube.
Then set up everything to flash the phone (SP-Flashtool, scatter file, etc.) and push the volume down button while connecting the phone to the computer. This switches the phone to META mode, the computer can recognize the phone, installs the preloader driver and finally flashes the phone
Maybe you have to do the procedure twice because on the first connection only the preloader driver will be installed.
This worked for my P8000(B) which I treated with SP-Flash Tool and "Format All + download"
Be aware that you formatted the NVRAM and lost your IMEI's
FrauHofrat said:
P8000(B)
Click to expand...
Click to collapse
What the meaning of (B)? Just asking because i have (W)
Tecno spark 3 pro clone flash file mt6570 android 9.0 firmware
Hi
I need your assistance, please help me find the firmware for the above phone. I recently tried to flash it with a Spark 3 clone firmware i got online but it gives an error STATUS_PARTITION_NOT_FOUND and also i accidentally formatted the bootloader on SP Flash Tool so the phone is a brick, it can't charge, and it can't turn on. I have screenshots of the About section when the phone was working, which contains the phone's features model and build but on opening the back cover of the device, i realized its a clone phone and i cannot determine its real model to get the exact right flash file.
Thanks
my phone shows blinking bot error when start or in recovery mode too
It starts to happen when i was trying to wipe cache n before completed i restrated my phone
now when i try it in fastbot method but adb doesnt detect my phone on PC even all drivers are installed properly
PLEASE NEED HELP!
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Same happened to me today after newest ota update
Same thing happened to me..64gb 4gb ram version Now it won't even get past first recovery menu to be able to wipe it... Don't know what to do and don't have a computer.
So after attempting to flash Asus 6.0 my device won't boot at all..
Like not even the Asus splashscreen, just some vibrate and shuts off.
If tried this solution but I can't get the iSOC driver to detect my device. It installs the Moorefield driver but it doesn't show as expected in the device manager.
All I get is the battery charging logo when I plug it in USB. And that is all. No other visual.
Is there any hope left to recover?
EDIT: I would expecting this screen but I'm not getting it. Maybe boot is not corrupted but something else? Anyway to enter that mode manually?
JulioQc said:
So after attempting to flash Asus 6.0 my device won't boot at all..
Like not even the Asus splashscreen, just some vibrate and shuts off.
If tried this solution but I can't get the iSOC driver to detect my device. It installs the Moorefield driver but it doesn't show as expected in the device manager.
All I get is the battery charging logo when I plug it in USB. And that is all. No other visual.
Is there any hope left to recover?
EDIT: I would expecting this screen but I'm not getting it. Maybe boot is not corrupted but something else? Anyway to enter that mode manually?
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Hehehe I guess that post has better English which made the detection process much clearer then the source I quoted.
Tricky part it the device will not stay detected for very long but if timed right, it works! Got to fastboot and if reboot, at least I get hanging cables to repeat the proper easily
Dunno if you get the thanks since the solution came from an other user actually. Just kidding! you get all my thanks for directing me to the proper article
Hello Guys,
My Lenovo P1A42 is stuck in Lenovo logo bootloop.
I tried to flash the stock rom "P1a42_S288_160721_ROW_RAW_QFIL" with QFIL.
So with QFIL, I see the Qualcomm HS-USB QDLoader 9008 (COM3).
I select "P1a42_S288_160721_ROW_RAW_QFIL\prog_emmc_firehose_8936.mbn" for programmer path.
I select build "P1a42_S288_160721_ROW_RAW_QFIL"
I also select rawprogram0.xml and patch0.xml.
It takes about 10 minutes to download and in the end "Download succeed. Finish download" message appears.
After this step, I press power+vol up+vol down together for around 12 secs to let the phone start with the downloaded new rom but again the phone goes to lenovo logo bootloop.
I have been continuosly searching for the solution but I still could not find it.
Probably I am missing a very small detail.
Can somebody please help me with this problem?
Thanks in advance.
Regards.
After a lot of trials I could solve the problem, but I dont know what I did different.
I did everything the same.
Anyway thanks to everybody who read.
Regards.
hagiwatt said:
Hello Guys,
My Lenovo P1A42 is stuck in Lenovo logo bootloop.
I tried to flash the stock rom "P1a42_S288_160721_ROW_RAW_QFIL" with QFIL.
So with QFIL, I see the Qualcomm HS-USB QDLoader 9008 (COM3).
I select "P1a42_S288_160721_ROW_RAW_QFIL\prog_emmc_firehose_8936.mbn" for programmer path.
I select build "P1a42_S288_160721_ROW_RAW_QFIL"
I also select rawprogram0.xml and patch0.xml.
It takes about 10 minutes to download and in the end "Download succeed. Finish download" message appears.
After this step, I press power+vol up+vol down together for around 12 secs to let the phone start with the downloaded new rom but again the phone goes to lenovo logo bootloop.
I have been continuosly searching for the solution but I still could not find it.
Probably I am missing a very small detail.
Can somebody please help me with this problem?
Thanks in advance.
Regards.
Click to expand...
Click to collapse
Please follow Getting Ready and Flashing ROM from the link https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650 . Once Success, The system/Phone reboots itself, You need not hold any combination of keys to reboot
Primarily make sure Your PC?Laptop detects QComm Driver when you Hold Vol Up+USB. If the device is detected and Driver not installed, You can install the same from the above link.
Verify the above using Device manager.
pavanpilot94 said:
Please follow Getting Ready and Flashing ROM from the link https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650 . Once Success, The system/Phone reboots itself, You need not hold any combination of keys to reboot
Primarily make sure Your PC?Laptop detects QComm Driver when you Hold Vol Up+USB. If the device is detected and Driver not installed, You can install the same from the above link.
Verify the above using Device manager.
Click to expand...
Click to collapse
Dear pavanpilot94,
Thank you for your message.
I had already made the procedure following the instructions in the link you sent to me. In the end of the download "Download succeed. Finish download" message appeared, but it did not restart automatically.
That is why as mentioned in the instructions you sent; ("If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.")), I had to make the key combination.
But everytime the device went to reboot the old Android in the device, so flashing was not successful.
I do not know where the problem was. After many trials, I could flash successfully, but everytime I had to do the same things. I did not make anything different.
Anyway the problem is solved now, but next time flashing, I do not know how to avoid this problem.
Thank you very much.
hagiwatt said:
Dear pavanpilot94,
Thank you for your message.
I had already made the procedure following the instructions in the link you sent to me. In the end of the download "Download succeed. Finish download" message appeared, but it did not restart automatically.
That is why as mentioned in the instructions you sent; ("If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.")), I had to make the key combination.
But everytime the device went to reboot the old Android in the device, so flashing was not successful.
I do not know where the problem was. After many trials, I could flash successfully, but everytime I had to do the same things. I did not make anything different.
Anyway the problem is solved now, but next time flashing, I do not know how to avoid this problem.
Thank you very much.
Click to expand...
Click to collapse
I now understand very clearly hagiwatt,
I'm happy that Device is back!!! :good::good::highfive:
On a Guess from the above understood there might be corrupt emmc locations, For this to be verified we might have to format the entire emmc. I'm too stuck with Logo Screen now, Unfortunately my Device is not getting detected by the Computer(Qcomm QDLoader) to have it flashed.
Trying to Fix it, I did a entire Format & Verified any Bad sectors as suggested by one of the developer, Unfortunately still not able to get the device detected.
pavanpilot94 said:
I now understand very clearly hagiwatt,
I'm happy that Device is back!!! :good::good::highfive:
On a Guess from the above understood there might be corrupt emmc locations, For this to be verified we might have to format the entire emmc. I'm too stuck with Logo Screen now, Unfortunately my Device is not getting detected by the Computer(Qcomm QDLoader) to have it flashed.
Trying to Fix it, I did a entire Format & Verified any Bad sectors as suggested by one of the developer, Unfortunately still not able to get the device detected.
Click to expand...
Click to collapse
I struggled for it since I wanted to send the device to warranity for vibration problem. I am happy that I could flash with the raw rom. I also wanted to reset the binary counter but no way.
Triangle Away does not support Lenovo.
I hope they are not checking the binary counter in the service center.
Does anyone have an experience about it?
Thanks.
hagiwatt said:
I struggled for it since I wanted to send the device to warranity for vibration problem. I am happy that I could flash with the raw rom. I also wanted to reset the binary counter but no way.
Triangle Away does not support Lenovo.
I hope they are not checking the binary counter in the service center.
Does anyone have an experience about it?
Thanks.
Click to expand...
Click to collapse
Hi Everybody!
I have just recieved the phone from service center. They fixed the vibration problem under warranity.
So binary counter did not affect the warranity status.
I dont know if they checked the counter or not.
For information to anyone who has the same issue.
Regards.
pavanpilot94 said:
Please follow Getting Ready and Flashing ROM from the link https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650 . Once Success, The system/Phone reboots itself, You need not hold any combination of keys to reboot
Primarily make sure Your PC?Laptop detects QComm Driver when you Hold Vol Up+USB. If the device is detected and Driver not installed, You can install the same from the above link.
Verify the above using Device manager.
Click to expand...
Click to collapse
and if the pc did not detecte the phone and i cant see any thing new in device manager ,plz help me