Can anyone help me with this:
I have always used my PPC's in my car connected to an external audio jack via a 3.5mm headphone connection. Not only did I use this for music, but it also allowed me use my car stereo to hear my callers much louder than the speakerphone was capable and still let me to use the built-in mic of the PPC to talk back.
Enter my Artemis and it's proprietary mini-usb audio jack...
I purchased the HTC mini-usb to 3.5mm adapter from expansys so that I could continue to use my in-car 3.5mm connection. Works great for music and TomTom (Austin Powers is scary loud now when he tells me to turn left!) BUT the built-in microphone in the Artemis seems to be disabled whenever the adapter is inserted in the mini-usb jack! I can't use Voicecommand with it inserted and my callers can't hear me until I pull out the adapter - which then takes away my nice loud car stereo to hear them!!!
Presumably, the disabling of the mic is because the mic in the included headset is expected to be used for calls when the audio jack is occupied. I know my configuration is not "standard," but it works (or worked) great for me and I would love to be able to continue to operate this way.
My question is: can anyone tell me which registry values control when the built-in mic is disabled? There must be a value that tells the Artemis to shut off the built-in mic when the headset is plugged in. I would love to change this so that the configuration I described above will work for me again. I have some trepidation about tinkering with my registry too much when I don't have that much experience with it. I hope there is some registry guru out there that will take pity on me and take on this challenge (if it's even possible).
Thanks in advance!
You'll have problems with something like this... I'd assume that it'll work similarly to the headset antenna registry entry, where on connection of the headset a key relating to the FM Radio software is changed from a 0 to a 1 allowing the application to launch.
There are one of 2 outcomes for you though unless you want to get crafty with a button or something to make the changes for you....
1 - Although you'll be able to change the reg setting, plugin in the usb cable or disconnecting it will simply reset the key,
2 - You'll permanently change it and if you want to use anything other than the handset mic you'll need to undo the change.
I'd say more than likely if it a dymanic key though and triggered by connection or disconnection of the usb cable then option 1 will take effect. I'm guessing that you'll need a button (software or hardware assigned) to control this properly.
Good Luck!
I'm too lazy to read.
Check the state and notification broker. Otherwise you'll probably have to directly interface with the audio driver.
V
Me too...?
Hi all,
I too want this fix, using the microphone whilst drawing off the audio feed for my vehicle stereo. Can it not be done with a soldering iron & external mic wired into the dongle adaptor?
Thanks Paul
http://shop.brando.com.hk/htcstereoconverterwithmicrophone.php
Here is an adapter with microphone...
I suggest hacking a handsfree and making your own jack for the car. this is my plan soon!
Hi All,
I have the same problem with my HTC Diamond. Did anyone have a fix for this yet? As i do not mind changing the registry or if someone wanted to make a little program that would do this i would be more then happy to donate for all your troubles.. I'm unable to hack my fm transmitter as it is a holder aswell... see picture
Anyone with a concrete solution?
This seems to be a hot topic! Are we really sure that adapters with mic are not readily available?
If you're au fait with hardware hacking, haret can probably tell you which interrupts are being used and you can write a solution to poll the irqs that way.
V
There is nothing to do with Registry Hacking or Softwares in your case...
psargent said:
Can anyone help me with this:
I have always used my PPC's in my car connected to an external audio jack via a 3.5mm headphone connection. Not only did I use this for music, but it also allowed me use my car stereo to hear my callers much louder than the speakerphone was capable and still let me to use the built-in mic of the PPC to talk back.
Enter my Artemis and it's proprietary mini-usb audio jack...
I purchased the HTC mini-usb to 3.5mm adapter from expansys so that I could continue to use my in-car 3.5mm connection. Works great for music and TomTom (Austin Powers is scary loud now when he tells me to turn left!) BUT the built-in microphone in the Artemis seems to be disabled whenever the adapter is inserted in the mini-usb jack! I can't use Voicecommand with it inserted and my callers can't hear me until I pull out the adapter - which then takes away my nice loud car stereo to hear them!!!
Presumably, the disabling of the mic is because the mic in the included headset is expected to be used for calls when the audio jack is occupied. I know my configuration is not "standard," but it works (or worked) great for me and I would love to be able to continue to operate this way.
My question is: can anyone tell me which registry values control when the built-in mic is disabled? There must be a value that tells the Artemis to shut off the built-in mic when the headset is plugged in. I would love to change this so that the configuration I described above will work for me again. I have some trepidation about tinkering with my registry too much when I don't have that much experience with it. I hope there is some registry guru out there that will take pity on me and take on this challenge (if it's even possible).
Thanks in advance!
Click to expand...
Click to collapse
There is so many ways of soldering of wires (Line IN & Line OUT) using a mini usb to made your PDA more compact...
The built-in microphone in the Artemis or Any other HTC Devices sure have to be disabled whenever the adapter is inserted in the mini-usb jack for the soldering of 2 Line-Out (Audio-Out Left & Right) and 1 Line-In (Audio-In/Microphone) Example: Headset that come with your PDA.
Unless HTC going to make one mini-usb to two cables,one for 3.5mm adapter for headphone and another to Mic.jack or a Microphone itself.
This is quite difficult for HTC to custom a cable or jack for individual need.
I think you have to DIY for your need in this case:
Use the headset that come with your Artemis, the one that have a Mic and mini-usb jack...
Cut away the left & right earphone, soldering the two cables into a 3.5 jack (male or female)
Both this jacks-Male or Female can be found in electronic spare-part shop anywhere.
I'm new in this forum... please cc this Thread to me 'thru Private Messages, so that i can give further help and keep track how the going you guys out there...
Hi everyone,
Is there anyway you can force the headphone profile when plugging in something into the 3.5mm socket?
When listening to music on my standard headphones, all is well but when I plug the Desire into my car radio's aux in, the phone initially goes into headphone only mode but then decides to switch to headset.
When it switches to headset, it randomly calls, skips music and stops the music. Rather annoying when your driving.
Any idea's?
Cheers
Gavin
3,5 mm stereo (TRS) type jacks do cause issues
Hi, I had exactly the same problem (see other post on this forum: 6269599 and 667240)
I guess you'll need a TRS (car stereo 3,5mm 3 contacts) to TRRS (HTC, 3,5 mm 4 contacts) adapter.
There's no issue with the standard headset delivered with the Desire
Not sure if it's a glitch or what. I read the possibility of re-routing your C-USB audio through your Bluetooth output was improbable because more than likely C-USB audio routing through the speaker settings when using viper4android was due to hardware.
That doesn't seem to be the case with the March update. If I'm listening to music on my Bluetooth headphones and make the switch to my aux cable using the C-USB adapter, while my Bluetooth settings are still enabled my audio routes through Bluetooth.
Anyone aware if this is a glitch or not? It's pretty amazing. As routing audio through your aux using viper4android speaker settings are trash.
I am trying with the headphone jack or a USB-C adapter to the microphone and nothing works.
Thanks
Not sure what you're trying to do, but I have this mic (see first pic) and when I plug it into the phone's headphone jack I get this headset icon in the notification bar (see second pic). Using the built-in Record app I can see that the mic is definitely working when plugged into the phone. So as long as the mic you try to use is showing up as a headset it should work for you. Unless it's an issue with whatever app you're trying to use with the mic.
Hey, I use lesser audio switch but i looking for something free and automatically. My mini jack does not work when I plug the headphones and i have to manually switch output in app to using headphones.