Not sure if it's a glitch or what. I read the possibility of re-routing your C-USB audio through your Bluetooth output was improbable because more than likely C-USB audio routing through the speaker settings when using viper4android was due to hardware.
That doesn't seem to be the case with the March update. If I'm listening to music on my Bluetooth headphones and make the switch to my aux cable using the C-USB adapter, while my Bluetooth settings are still enabled my audio routes through Bluetooth.
Anyone aware if this is a glitch or not? It's pretty amazing. As routing audio through your aux using viper4android speaker settings are trash.
Related
I'm not sure if it's a software or hardware problem, but Skype on my friend's Desire HD always route the audio to the earpiece rather than the headphone he plugged in. However my Nexus S doesn't have this problem. We are both running CM7 RC1. Does anyone know a solution to this?
Well, it turns out if a headset is used, Skype correctly routes the audio to the headset. However, using an ordinary stereo headphone doesn't work, only the notification audio from Skype goes to the headphone, but not the in-call audio. I wonder if it's an audio driver issue, Nexus S doesn't have this problem at all.
From what i understood, your headset will be used (with stereo) if it supports A2DP.
Else, some apps permit to redirect audio to most BT headsets, but in mono. Super BT Mono, Bluetooth Switcher, Choice Dialer, Bluetooth Audio Widget, and perhaps few others, seem to do it.
First time I've ever tried using bluetooth audio streaming, it's to my car stereo. My car stereo is Bluetooth 2.0 certified. The issue I have is any music I stream to it from my phone sounds heavily compressed, almost as if it's playing in 96/128kbps (music is all V0 or 320kbps).
My understanding is as the stereo is bluetooth 2.0 and A2DP certified it should be statistically able to handle up to 700 odd kbps.
Is there something I may have to change on the One X or car stereo? My One X picks up the car stereo as a bluetooth headset.
If I use a 3.5mm jack into the auxiliary port on the stereo it's fine, it's just the bluetooth streaming.
HTC A2DP streaming quality is a shame...
Looks like HTC (after few years) still hasn't fixed this problem in sense 4.0
Here you can find more info:
http://forum.xda-developers.com/showthread.php?t=708685
Yes, this realy is a shame..
I am having a weird isssue. Just activated this phone and was using a Optimus S before this where everything worked pretty well but was slow.
I have my Motorola BT for hands free headset in the car. It's probably at least 3 years old but has always worked great with my tablets and other devices. I usually have my BT headset on in and a AUX cable in the headphone jack. I would play music from Google Play on my stereo and incoming/outgoing calls would automatically be routed to my headset. This all worked fine on Optimus.
I tried the same setup on my ET4G and when I try to make a call over BT headset I get no Audio in my headset. Also after that any music I play on Google Play, Pandora, etc doesn't get output to 3.5mm Aux jack. I pull out the headphone jack and no music is output to the external Speaker. It's as if the ET4G is possibly trying to output to my headset and doesn't let audio thru. However I don't hear any music thru my headset as it doesn't have A2DP.
A reboot will fix the 3.5mm jack and external speaker.
Any suggestions?
If you haven't already done it, go into BT settings, click on the settings for your device, and uncheck "Media audio".
When I connect to media audio via bluetooth in my car, I can only get audio out of the left side speakers. This is repeatable on different apps that play music. When I play a radio station in my car I get sound out of both sides.
What can I check to help diagnose this problem and hopefully fix it?
Thanks.
Does anybody else have this problem?
Does your car audio system support A2DP stereo Bluetooth profile ? Probably it does, otherwise I don’t think you can stream audio with just the Hands-free (HFP) profile (which is a low quality link meant only for calls). Mine works fine in stereo with my car’s audio system. Try deleting all the BT settings from your car and initialize everything from the beginning.
Iam verry sure that your audio car not support A2DP because in my car i can use for stereo...try to see the specification for your car audio bluetooth..
Sent from my HTC One X using xda app-developers app
It works fine when I use my Galaxy Nexus. This makes me believe it supports A2DP. This problem is unique to the One X for me. Did I get a bad phone?
Also, when I crank the balance over to the side that doesn't work I can hear it a little bit, but it's crackly and distorted.
EDIT: Problem solved. Re-seated the wiring in the sound system and everything is fine now.
Im having an issue with audio quality on bluetooth audio music , on any touchwiz rom it sounds compressed and awful the only rom i found it sounded good on was cm10 but i missed the functionality of spen. Both roms were ran on same bluetooth soundbar.
So my question is have any of you noticed the bluetooth audio quality or is it something on my end, if you have are there any solutions to improve the audio quality.
Sent from my SGH-T889 using Tapatalk 2
I am running JediX11 and i use PowerAmp music player. It sounds great and has a 10 band EQ If you try it o don't recommend using the "stereo x" setting it adds more of that compressed audio sound. I use Bluetooth to connect to my car stereo and a portable speaker set i have. I can tell no distinct difference between the BT audio and the headphone jack. I also uninstalled beats audio, Its just another layer of equalization software that can really degrade sound quality (i tried every possible setting before i removed it).