when I turn on my samsung gt-i9192 s4 mini displays samsug galaxy s4 mini gt-i9192 it crashes without bring up the Samsung logo or to enter the téléphonne.
I try and flashed but nothing changed.
here is what appears on the screen when I go to dowloead mode.
odin fashion
product name: gt-i9192
current binary: samsung official
system status: custom
knox kernel lock: 0 * fffffffc
knox warranty vdid: 0 * fffffffc
CSB-config-lsb: 0 30 *
ap bootloader swrev: 2
write protection: enable
help me.
Hi there! I installed Good Lock on my note edge but I have a problem, since the layout of the notification bar is setted on the extreme right of the primary screen, leading to the disappearence of the last digit of the clock.
Any other of you noticed the same thing? Anyone figured out how to Fix it?
Maybe you have to change dpi goodlock. Try xposed module for dpi change
Is good lock compatible with note edge? I have installed and make my note edge going lagging. Can't run smoothly.
The layout of edge become dissappeared. My note edge become unresponsive (like diminished of RAM but actually not).
I have done factory reset and wipe cache but still having the same problem about lagging. Anyone can Help me?
andi87 said:
Is good lock compatible with note edge? I have installed and make my note edge going lagging. Can't run smoothly.
The layout of edge become dissappeared. My note edge become unresponsive (like diminished of RAM but actually not).
I have done factory reset and wipe cache but still having the same problem about lagging. Anyone can Help me?
Click to expand...
Click to collapse
good lock is not for note edge.
Naoufalstitou said:
good lock is not for note edge.
Click to expand...
Click to collapse
When I charged, suddenly show the black background & the detail notification like below:
Could not do normal boot
ddi: mmc_read failed
Odin mode : high speed
Product name : SM-N915SF
CURRENT BINARY : Samsung Official
System status : Custom
Reactivation lock: OFF
KNOX WARRANTY VOID : 0X0
QUALCOM SECUREBOOT : ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
And big Android logo on the center of screen..
Downloading...
Do not turn off target.
Can you help me what should I do with my note?
I already fatory reset and wipe cache but my note still have the same problem (lagging and restarted frequently)
andi87 said:
When I charged, suddenly show the black background & the detail notification like below:
Could not do normal boot
ddi: mmc_read failed
Odin mode : high speed
Product name : SM-N915SF
CURRENT BINARY : Samsung Official
System status : Custom
Reactivation lock: OFF
KNOX WARRANTY VOID : 0X0
QUALCOM SECUREBOOT : ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
And big Android logo on the center of screen..
Downloading...
Do not turn off target.
Can you help me what should I do with my note?
I already fatory reset and wipe cache but my note still have the same problem (lagging and restarted frequently)
Click to expand...
Click to collapse
Your motherboard is dying. You should look into warranty. Once your phone shows mmc read failure, it will stop booting shortly after
Hello everyone,
I've needed to replace a motherboard for a friend of mine, bought on Aliexpress, installed but no matter which fw version I install, it starts the Knox Enrollment procedure after entering any internet source.
Motherboard works fine, GSM signal too. IMEI checked on imei.info, confirmed to be an S9.
Factory data reset missing both from recovery and General management.
In Settings>About Phone>Software Information is present "Knox Configure" it tells me that "Your phone is configured for Samsung Electronics UK" with phone number and email. Latest profile applied: RDU S9.
Firmware downloaded from Frijia.
DrParser mode, in usb settings is missing ADB. Ther's only "rndis+acm+dm".
Q1: If someone put personal information in this phone (photos, accounts and so on) are visible from the owner of Knox account with motherboard's Imei binded in?
Q2: there's a way to fix this issue?
Any help is greatly appreciated.
Thanks.
Hi Guys,
I see there are alot of people who have had this problem but I have a samsung watch 1 and there are no inputs on it for a wire.
I can get to recovery mode but every option brings me back to the same screen.
ODIN MODE
PRODUCT NAME: Samsung Offical
SYSTEM STATUS: Custom
REACTIVATION LOCK: ON
SECURE DOWNLOAD: Enabled
CARRIER_ID:
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!!
I have only had this for 3 days and was trying to change the region for samsung pay.
Thanks
Seems you need USB cable...
Look here:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Best Regards
I have a snapdragon sm g9600 and had a custom rom (DoTos) installed. I had an issue with call of duty closing randomly and went to settings > developer options and was going to change the at most background processes. But when i went to swipe down i accidentally clicked the oem unlock option instead. I knew that was probably bad but it wouldn't switch back on. I tried to reboot the phone to turn it back on and now i'm frp locked. I've tried multiple times with combo files and stock files to attempt to fix this issue but it keeps acting like odin isn't connecting right to the phone. I also don't know which version / locale phone i have. I have updated my samsung drivers and have odin version 3.14.1 I also tried with 2 different usb cables as well and tried different ports in my pc to no avail.
Can not go to recovery or boot.
In download mode it shows the following:
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Custom
FRP LOCK: ON
OEM LOCK: ON
KG STATUS: Checking
WARRANTY VOID: 0x1 (0x30C)
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B7(2,2,2,7,2) K7 S7
SECURE DOWNLOAD: ENABLE
DID: 20208BABE2395A11