Hi there! I installed Good Lock on my note edge but I have a problem, since the layout of the notification bar is setted on the extreme right of the primary screen, leading to the disappearence of the last digit of the clock.
Any other of you noticed the same thing? Anyone figured out how to Fix it?
Maybe you have to change dpi goodlock. Try xposed module for dpi change
Is good lock compatible with note edge? I have installed and make my note edge going lagging. Can't run smoothly.
The layout of edge become dissappeared. My note edge become unresponsive (like diminished of RAM but actually not).
I have done factory reset and wipe cache but still having the same problem about lagging. Anyone can Help me?
andi87 said:
Is good lock compatible with note edge? I have installed and make my note edge going lagging. Can't run smoothly.
The layout of edge become dissappeared. My note edge become unresponsive (like diminished of RAM but actually not).
I have done factory reset and wipe cache but still having the same problem about lagging. Anyone can Help me?
Click to expand...
Click to collapse
good lock is not for note edge.
Naoufalstitou said:
good lock is not for note edge.
Click to expand...
Click to collapse
When I charged, suddenly show the black background & the detail notification like below:
Could not do normal boot
ddi: mmc_read failed
Odin mode : high speed
Product name : SM-N915SF
CURRENT BINARY : Samsung Official
System status : Custom
Reactivation lock: OFF
KNOX WARRANTY VOID : 0X0
QUALCOM SECUREBOOT : ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
And big Android logo on the center of screen..
Downloading...
Do not turn off target.
Can you help me what should I do with my note?
I already fatory reset and wipe cache but my note still have the same problem (lagging and restarted frequently)
andi87 said:
When I charged, suddenly show the black background & the detail notification like below:
Could not do normal boot
ddi: mmc_read failed
Odin mode : high speed
Product name : SM-N915SF
CURRENT BINARY : Samsung Official
System status : Custom
Reactivation lock: OFF
KNOX WARRANTY VOID : 0X0
QUALCOM SECUREBOOT : ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
And big Android logo on the center of screen..
Downloading...
Do not turn off target.
Can you help me what should I do with my note?
I already fatory reset and wipe cache but my note still have the same problem (lagging and restarted frequently)
Click to expand...
Click to collapse
Your motherboard is dying. You should look into warranty. Once your phone shows mmc read failure, it will stop booting shortly after
Related
Long story short, I was trying to get Sprint GS3 on boost lost the meid, baseband, hardware version, uart and usb are listed as unknown etc...
Did research and found found system dump menu. Logged and saved all that could and had option to. Got to one button that said Debug Level: LOW; so i changed it to high. Phone then reboots and goes to " MODEM CRASH UPLOAD MODE" Top left of screen says Subsystem Crashed: MODEM!.....MODEM INFO.....Error type: fatal......Task: cm......File: cmph.c......Line: 23605......=CM+cm_prl_pref-1997651923........global_pvs : 0x1
wait...
done!
Just wondering what to do from here.
Brick?
Sent from my SPH-L710 using xda premium
myboothill? said:
Long story short, I was trying to get Sprint GS3 on boost lost the meid, baseband, hardware version, uart and usb are listed as unknown etc...
Did research and found found system dump menu. Logged and saved all that could and had option to. Got to one button that said Debug Level: LOW; so i changed it to high. Phone then reboots and goes to " MODEM CRASH UPLOAD MODE" Top left of screen says Subsystem Crashed: MODEM!.....MODEM INFO.....Error type: fatal......Task: cm......File: cmph.c......Line: 23605......=CM+cm_prl_pref-1997651923........global_pvs : 0x1
wait...
done!
Just wondering what to do from here.
Click to expand...
Click to collapse
Can you access download mode at all?
Yes I can, but no matter what I flash my baseband is still unknown and cp modem
Still unknown. I can still get in phone. My computer reads fine except for the modem. In qpst it jumps from "no phone" to "0" to showing phone number and correct esn.
Sent from this BAMFn' Rezzie in mine pocket
when I turn on my samsung gt-i9192 s4 mini displays samsug galaxy s4 mini gt-i9192 it crashes without bring up the Samsung logo or to enter the téléphonne.
I try and flashed but nothing changed.
here is what appears on the screen when I go to dowloead mode.
odin fashion
product name: gt-i9192
current binary: samsung official
system status: custom
knox kernel lock: 0 * fffffffc
knox warranty vdid: 0 * fffffffc
CSB-config-lsb: 0 30 *
ap bootloader swrev: 2
write protection: enable
help me.
While I was excited as to the prospect of installing 5.0.1 , I didn't notice the fact that apparently the SM-N910V (non-developer) doesn't take kindly to loading ROMs so now it get's stuck at black screen saying "Software Update Failed". The info at the top reads as follows:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
At this point, I just want to be able to get my phone back on (if at all possible). Any help is greatly appreciated.
Hi Guys,
I see there are alot of people who have had this problem but I have a samsung watch 1 and there are no inputs on it for a wire.
I can get to recovery mode but every option brings me back to the same screen.
ODIN MODE
PRODUCT NAME: Samsung Offical
SYSTEM STATUS: Custom
REACTIVATION LOCK: ON
SECURE DOWNLOAD: Enabled
CARRIER_ID:
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!!
I have only had this for 3 days and was trying to change the region for samsung pay.
Thanks
Seems you need USB cable...
Look here:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Best Regards
I have a snapdragon sm g9600 and had a custom rom (DoTos) installed. I had an issue with call of duty closing randomly and went to settings > developer options and was going to change the at most background processes. But when i went to swipe down i accidentally clicked the oem unlock option instead. I knew that was probably bad but it wouldn't switch back on. I tried to reboot the phone to turn it back on and now i'm frp locked. I've tried multiple times with combo files and stock files to attempt to fix this issue but it keeps acting like odin isn't connecting right to the phone. I also don't know which version / locale phone i have. I have updated my samsung drivers and have odin version 3.14.1 I also tried with 2 different usb cables as well and tried different ports in my pc to no avail.
Can not go to recovery or boot.
In download mode it shows the following:
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Custom
FRP LOCK: ON
OEM LOCK: ON
KG STATUS: Checking
WARRANTY VOID: 0x1 (0x30C)
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B7(2,2,2,7,2) K7 S7
SECURE DOWNLOAD: ENABLE
DID: 20208BABE2395A11