Related
All the cases I've seen so far seem to be matte finish, and I find the glossy TPU to provide a better grip, since the human hand usually has some amount of moisture on it. Anyone find a glossy TPU case for the N5 that won't break the bank?
yomuppet said:
All the cases I've seen so far seem to be matte finish, and I find the glossy TPU to provide a better grip, since the human hand usually has some amount of moisture on it. Anyone find a glossy TPU case for the N5 that won't break the bank?
Click to expand...
Click to collapse
Same. Glossy TPU tend to offer better grip. Loved the one I had for my G2x.
So far I have only found those S-type TPU cases. I just want a one-tone. I don't quite understand why they add the S design to it.
There's quite a few ebay listings for $3 solid colored TPU cases shipped from the PRC
Look for Cruzertlite.
Sent from my HTC One X+ using Tapatalk 2
Cruzerlite cases have all these awful designs. They should just make a plain one.
CIMO has a glossy TPU case on Amazon. I have a Tudia TPU case waiting on my Nexus 5 this week.
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
kylethelife said:
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
Click to expand...
Click to collapse
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Wow! That's solid helpful. The one I wanted to get but didn't fit when I tried it on was the Bepak Slim Transparent Case so stay away from that if you've got the bamboo. I really wanted a clear case coz I didn't want to cover the Bamboo but after trying the Bepak case I didn't think any slimfit clear case would fit. Glad to hear the Ringke Fusion Case fits! Do you have the clear one? I think I might just order one.
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
TheMurphmeister said:
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
Click to expand...
Click to collapse
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
nicholaschum said:
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
Click to expand...
Click to collapse
Thanks for the information; think I'll give that one a miss then and go for the Tudia Ultra Slim instead
nicholaschum said:
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
Click to expand...
Click to collapse
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Sagar4995 said:
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Click to expand...
Click to collapse
I would not, my two cases I ordered one month apart are exactly what KP Smith said in a comment here:
https://plus.google.com/u/0/app/basic/stream/z13awxcpole1eh1tf22uihs51zrfd3ssp
Sent from my Nexus 6 using Tapatalk VIP
Vassy's One+
Thank you for doing this review. Your post makes me want to try the TUDIA Ultra Slim LITE TPU Bumper.
Saw this review on it.
youtu.be/cd1O8LdeGUo
my diztronic tpu slim cases fit pretty good as well. you put them on like you would with the regular back then just run your fingers around the edges and it falls right into place. I have 4 different colors from different batches and all fit fine. I also have the ringke fusion.. its actually on my phone right now. Its got the clear back and tinted sides. Fits 99.9% perfectly! Its my go to case for sure.
Hi im looking to decide between the Spigen Neo Hybrid and Spigen rugged armor. I have read many reviews but none of them seems legit, so any user who have any of these cases please confirm this for me:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
SPIGEN RUGGED ARMOR:
1. Is the case too slippery?
2. How is the drop protection on this case?
I'm looking for protection over looks so please help me make a valid choice, and if you think that both the cases sucks feel free to suggest me the one you prefer.
Thanks in advance.
Hi, I have the Spigen Rugged Armor, this case is good looking if you don't mind that the OnePlus logo is hidden with this case. This case also have a good grip and good drop protection.
I once dropped my 3T while using this case with the screen facing down the concrete. Fortunately, this case protected my screen from shatter. I recommended you get this case if you spend majority of your work outside office. Better safe than sorry.
I bought the Rugged Armor and I have to say I'm really impressed. It's thin, feels great and definitely isn't too slippery. The carbon fiber looks good too. The only issue is I'm not sure how much drop protection it would provide because like I say it is very thin. There's a lip over the screen but I can imagine the phone becoming disfigured underneath if it was dropped from an appreciable height. I'm usually quite careful though so I'm trying not to worry about that
Thanks for the reply guys I was slightly inclined towards the rugged armor my self, it looks frekin awesome. I'll go for it then.
Currently using the Spigen rugged armour as I was afraid of finger prints with the clear variant. Not as slippery as I expected and gives all the protection you need, saved my phone from a couple of drops and it is scratch free
I'm actually using both. I initially only had the rugged armor and then bought the Neo hybrid. I found with a glass screen protector the Rugged armor doesn't play well with it. With just a plastic screen protector the Neo hybrid looks really nice. I love em both though
I have one and it's not really a good "feel" for me. It's a great case, just not to my liking. I am rocking this one now: OnePlus 3T Case, OnePlus 3 Case, Nillkin Synthetic Fiber Premium Bumper Case Cover [Compatible with Magnetic Car Holder] for OnePlus 3T / 3 - Black. It's a lot like the OEM and fits great. With that and the LiquidSkin protector, I really like the slimness and the feel.
Been using the rugged armor for about a month.
- Not slippery
- Good protection
- Not too thick
- I think the CF is stupid. I want it plain.
9/10 would buy again.
Aukrus said:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
Click to expand...
Click to collapse
Have had the OP3T with that case for 2 months now
1. No they don't. I just have one little scratch on the corner revealing a small white line (barely visible)
2. No idea since I haven't dropped the phone a single time. I can just say that the bumper makes the case kind of more slippery actually. Previously I rocked Spigen Ultra Hybrid on Nexus 5/Nexus6/Galaxy S6 and it was much more grippy. I felt much safer while for example on a bus, now I aim to hold it with two hands since I don't feel the grip this well. The Neo's advantage over Ultra Hybrid though, is the fact that the whole product is relatively soft and flexible so that it doesn't damage the device at all as UH used to with its back made of hard solid plastic.
9/10 very decent, non-bull**** and SOLID case anyway. Totally recommend it, the notices above are just the matter of my fussiness
I always rock an Otterbox Commuter case on my phones mainly for work conditions can get rough at times. From what I've seen, Otterbox is only offering their Defender series (too big and bulky) and their Symmetry series (thinner, one piece case). I've decided to go with the Symmetry series and I'm pleasantly surprised. It definitely adds a little bit of bulk, but not as much as the Commuter, while offering great all-around protection. The one piece design is easy to put on and remove (unlike previous Symmetry cases I've tried on other phones). I do wish that there was a bit of grip on the sides like the Speck Presidio series cases, but I like the design. Unfortunately the only options were clear, pink, or black.... so I went with black.
So what's your choice for a protective case? Share pics and comments.
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
holden56 said:
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
Click to expand...
Click to collapse
I had the unicorn beetle pro for my Nexus 6 and it's a nice cheaper alternative to the defender, but it still adds more bulk than the commuter case. I may look into the poetic case though. Let me know how they work out for you. ?
I went to Best Buy and tried out the Defender case. Definitely too bulky and I hate the built in screen protector (and it doesn't sit well over a glass screen protector, even if you take out the built in one).
You may not like the poetic as it has the built in screen protector. I'm used to the bulk of the defender so I'm not a great judge of the size. I will tell you the poetic is smaller then the supcase unicorn beetle. Built in port covers are nice too, overall it is a smaller rugged case you can say.
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Went from a Note 3 with Otterbox Commuter to a G6 with Spigen "Tough Armor" case, and am satisfied with it. Feels like it provides just as much protection as the Otterbox Commuter, yet not adding quite as much bulk. I'm kinda rough with my phones sometimes, and I'd have peace of mind if I were to accidentally drop my G6 from waist-height or so.
If you choose to go with Spigen, definitely buy it off Amazon, rather than directly from Spigen's website; it's cheaper off Amazon.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I almost went with this case but I got this one instead. It's the Caseology.
This Poetic has been great for me after a few days of use. Lightweight, decent protection, and good grip.
Poetic Affinity Slim Fit for LG G6 Clear Case With Anti-Slip Side Grip and Reinforced Corner Protection Bumper for for LG G6 Black/Clear https://www.amazon.com/dp/B06W5K3YWF/ref=cm_sw_r_cp_apa_N4v7ybREB4YDC
I wanted to order Poetic but they don't ship to EU and i get Ringke Fusion but still waiting for the phone.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I just ordered this one on Amazon. Saw the office and couldn't pass it up. Glad to see it looks good, and works well with a glass protector. I got the Spigen glass 2 pack as I've always liked everything Spigen makes.
Was gonna get the unicorn beetle that I had for my s7e, but don't think I need that much protection on this one, plus no edge screens that I need to prevent my palm from hitting lol.
Update: I hate the Karbon case. Doesn't fit tightly and leaves gaps at the edges on the front. I guess for $8 it'll hold me over until I get a good case, but this one is not staying pass this weekend.
Sent from my LG-H872 using Tapatalk
I would go for the Spigen Rugged Amor, it’s much slimmer and provide pretty much the same protection as the symmerty series http://www.the-reviewr.com/best-lg-g6-case/
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
djjroc007 said:
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
Click to expand...
Click to collapse
Do you have pics of what it looks like on your phone?
Thanks!
So guys I'm searching for a good protective case that doesn't add too much bulk. I'm torn between the Poetic Revolution and the Supcase Unicorn Beetle. I like the way the Poetic looks except for the cutout on back, I prefer the Unicorns Cutouts. If anyone here has any pics to share, that be awesome. Or unless someone has another case to throw in the mix. THanks
I am trying to find a slim case for my 2xl that does not feel like its going to slip directly out of my hand.
I recently picked-up the Google fabric case and it still feels like its going to slip out.
Can anyone recommend a slim case that does not feel slippery?
I was thinking of the following and let me know anyones thoughts that have had it: RhinoShield Crash Bumper or the Spigen thin fit.
I have the Dbrand Grip, another bumper case, and it's...well, grippy.
I've had two.
The first wore down really quickly.
I got sent a brand new shipment by mistake (and they let me keep it) and this one seems to be more durable.
I've had it longer and it's not nearly as worn.
https://www.ipitaka.com/collections/magcase-for-pixel-2
The top, not feel slippery
I got the Maxxessory Ultra-thin black case from amazon for $8. I love it. Crazy thin, matte finish - so it's a little grippy. Can't beat the price.... and the phone feels almost naked while having some protection.