Develop Bugs

[APP] GVM: Galaxy Volume Modifier - v1.0.2 - JellyBean FC Fix

NOTE: This is ONLY for rooted, International Samsung Galaxy S III's. It will not work on any other model as far as I know.
If anyone's been following my thread on SGS3 volume hacks and modifications you'll most likely already know what this app does, if not, here's the thread which should explain everything you need to know!
Now, this is by no means finished, it's simply a 'proof-of-concept' app at the moment, showing that it does indeed work in app form!
UPDATE 17/08/12: I'd consider this fully in beta and no longer just a 'proof-of-concept'. So far, the Speaker, In-Call and Ringtone options are done.
Requirements
- An International Samsung Galaxy S III with Root Access and Busybox
- The ROM you're running must be a Samsung ROM (i.e. not CM)
- A knowledge of ADB, Fastboot and the flashing process, just in case.
Features
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can alter the "Output Volume" and the "Boost Volume" for the Earpiece, Speaker, Headset, Headphones and Dock for the Normal sound, the In-Call sound and the Ringtone ("Dock" options not available for 'In-Call').
GVM will also now read from the file and fill in the current values that are in use.
The "Output Volume", by default, is set to 50 and can reach a maximum of 63. The "Boost Volume", on the other hand, isn't used normally (so it's default is 0) but can be increased to 55 (the combination of 63 and 55 is the loudest you can possibly push this phone, via this method, and is NOT recommended as it is insanely loud and distorts horribly!).
If you have already altered the "default_gain.conf" file on your device it should still work fine provided you haven't added any new lines or screwed about with the format. In any case, it's probably wise to replace it with the version attached to this post, just so everything still works smoothly (open the .zip and move the file inside, the "default_gain.conf", to "/system/etc/" and you're good to go!)
Bugs/Upcoming Features
- The "Terms and Conditions" page opens every time you open then app. This will be changed to only the first time.
- The values you can enter are not limited, so you can input higher values than 63. It will simply "break" the audio on your device until you change it back.
- All the other options (such as "In-Call" and "Ringtone") will be added in soon.
- It doesn't currently "read" from the file and fill in the current values. This is a planned feature.
Change Log
V1.0.2 - 29/08/2012
- There's now an option to flash the original 'default_gain.conf' for those of you who have edited ones
- Force Close on Jelly Bean has been fixed (permission problem)
- Now displays a message each time you apply to let you know it has finished
V1.0.1 - 17/08/2012
- 'Terms and Conditions' only appears once when you first run the app
- 'In-Call' and 'Ringtone' pages added
- The app now reads from the 'default_gain.conf' file and fills in the values you are currently using for you
v1.0.0 - Release Beta
Any questions, please don't hesitate to ask!
Enjoy!

I'm assuming that this only works on Samsung roms.

Ry4n said:
I'm assuming that this only works on Samsung roms.
Click to expand...
Click to collapse
Yes i was thinking the same...
You can tweak it the same on cm9/10 manually though! (it's quite easy..)

Works like a charm
Sent from my GT-I9300 using xda premium

Hi,
Meltus, so for the SIII Volume+ is no longer needed? "GVM" only for the SIII (obviously ) and Volume+ is more a "generic" app?
With this new app+your sound hack all is ok?
Or I misunderstood something? Because with SiyahKernel (which comes with some sound modifications) Volume+ was not great, I mean no much more improvement like on my Gnex. So with "GVM" it's good...?
Thanks
EDIT: note, you will tell me to try and see ... that's what I'll do
In any case thanks for this and also thanks for Volume+ wich helped me for my Gnex and his poor volume sound

nfsmw_gr said:
Yes i was thinking the same...
You can tweak it the same on cm9/10 manually though! (it's quite easy..)
Click to expand...
Click to collapse
Yeah, it only works for Samsung ROMs at the moment but I might try and add in CM support
viking37 said:
Hi,
Meltus, so for the SIII Volume+ is no longer needed? "GVM" only for the SIII (obviously ) and Volume+ is more a "generic" app?
With this new app+your sound hack all is ok?
Or I misunderstood something?
Thanks
EDIT:note, you will tell me to try and see ...
Click to expand...
Click to collapse
That completely depends.
If you only use Volume+ as a generic volume booster then no, it isn't really needed anymore. But Volume+ is an equalizer so you can tweak the sound as much as you like, making it have much more bass or much more treble, etc. This mod simply increases the volume. They should both work fine together, although I've not really tested them that much.

nice app thank you

Would be good if you could have it read the existing values and display them so you know what you are currently at.
Excellent work though.

carbonize said:
Would be good if you could have it read the existing values and display them so you know what you are currently at.
Excellent work though.
Click to expand...
Click to collapse
That's the plan

Man, thanks for creating the app. Is a great idea.
But, I cannot make this nor the manual edit in "[MOD][ROOT] Audio Hacks and Modifications + New Insanely Loud Volume Hack!! (post 2)" work.
This app is only install, give permissions, modifiy & save, and that shoul be it, right? I have the GT-I9300 running stock ROM.
I will wait for a next update.

V1.0.1 - 17/08/2012
- 'Terms and Conditions' only appears once when you first run the app
- 'In-Call' and 'Ringtone' pages added
- The app now reads from the 'default_gain.conf' file and fills in the values you are currently using for you

Thanks man
But why settings saw me this
I'm on criskelo rom who use your mod
Envoyé depuis la galaxy Addict via Tapatalk

Was starting to think it was just me getting the strange readings.

Sad56 said:
Thanks man
...
I'm on criskelo rom who use your mod
Envoyé depuis la galaxy Addict via Tapatalk
Click to expand...
Click to collapse
carbonize said:
Was starting to think it was just me getting the strange readings.
Click to expand...
Click to collapse
Did you apply the file attached to the original post? I strongly recommend you do so (otherwise stuff like this might happen )
EDIT: of course, don't forget to back up your current file first!

Meltus said:
If you have already altered the "default_gain.conf" file on your device it should still work fine provided you haven't added any new lines or screwed about with the format. In any case, it's probably wise to replace it with the version attached to this post, just so everything still works smoothly (open the .zip and move the file inside, the "default_gain.conf", to "/system/etc/" and you're good to go!)
Click to expand...
Click to collapse
I'm using your default_gain.conf file from the insane volume thread, the one with your altered values and the extra bit. I take it it's the extra bit causing the issue? Will push the original one over.

Thanks man it work
Also can you provide settings you recommend.
For boost Volume in fact
Envoyé depuis la galaxy Addict via Tapatalk

carbonize said:
I'm using your default_gain.conf file from the insane volume thread, the one with your altered values and the extra bit. I take it it's the extra bit causing the issue? Will push the original one over.
Click to expand...
Click to collapse
Yeah, there's a fair few extra edits in that one, it should work with the one from this thread though
I'm going to add in an option to push this file from the app in the next update.
Sad56 said:
Thanks man it work
Also can you provide settings you recommend.
For boost Volume in fact
Click to expand...
Click to collapse
I'd recommend setting the output volume to max (63), the Boost value to 0 and if that seem too high you can start reducing it until you find a good volume. If it's not loud enough for you then you can start increasing the Boost value until you find a good level!
Sent from my GT-I9300 using xda premium

I try this.
The boost Volume is amazing
I recommend to not increase this setting to much.
I try 30 and have a big surprise
My settings are now 60 for output and 5 for boost (for normal and Ringtone) and it seems good.
Anyway your mod is really impressive and with this app it's perfect. :thumbup:
Many thanks
Envoyé depuis la galaxy Addict via Tapatalk

Sad56 said:
I try this.
The boost Volume is amazing
I recommend to not increase this setting to much.
I try 30 and have a big surprise
My settings are now 60 for output and 5 for boost (for normal and Ringtone) and it seems good.
Anyway your mod is really impressive and with this app it's perfect. :thumbup:
Many thanks
Envoyé depuis la galaxy Addict via Tapatalk
Click to expand...
Click to collapse
Not a problem, glad you like it!

Just to say you have a typo. Says earpeice when it's earpiece
Yes I'm a pedant :|

[Q]

Hey um I have a galaxy s3 and running on rooted original rom and I don't want to flash a custom rom for a couple reasons. Is there any way I can get the notification of nexus 7 or of the Cyanogenmod 10.1 on my s3?
Here is the notification bar I was talking about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks everyone for reading. Have a good one.

flash cm10.1 an option?

mt3g said:
flash cm10.1 an option?
Click to expand...
Click to collapse
No because I had some problem when I play music on cyanogenmod and rootbox mod. The music go smooth when the phone is idle. However, when I use the phone ( any app or even touch the screen ) it stops the music and plays again. IDK how to explain lol.

vietthanh1206 said:
No because I had some problem when I play music on cyanogenmod and rootbox mod. The music go smooth when the phone is idle. However, when I use the phone ( any app or even touch the screen ) it stops the music and plays again. IDK how to explain lol.
Click to expand...
Click to collapse
This is caused by touch sounds. Go to System/Sounds and disable them. It threw me for a loop and pissed me off too until I figured that out.
Sent from my SGH-T999

EtherealRemnant said:
This is caused by touch sounds. Go to System/Sounds and disable them. It threw me for a loop and pissed me off too until I figured that out.
Sent from my SGH-T999
Click to expand...
Click to collapse
Do you recommend any rom for me besides cyanogenmod 10.1? I think the root box rom has more feature than cyanogen. You can agree or disagree with me it's just my opinion. If there's something cool, please point it out. Thanks

vietthanh1206 said:
Do you recommend any rom for me besides cyanogenmod 10.1? I think the root box rom has more feature than cyanogen. You can agree or disagree with me it's just my opinion. If there's something cool, please point it out. Thanks
Click to expand...
Click to collapse
I have been using AOKP (link is in my sig) without any issue. The latest stable build is LTS2.

[email protected] said:
I have been using AOKP (link is in my sig) without any issue. The latest stable build is LTS2.
Click to expand...
Click to collapse
Hey I got my s3 running on Rootbox ROM. Do you have any idea how can I take screenshot in this ROM? LOL kindda stupid question but honestly I don't know how...

vietthanh1206 said:
Do you recommend any rom for me besides cyanogenmod 10.1? I think the root box rom has more feature than cyanogen. You can agree or disagree with me it's just my opinion. If there's something cool, please point it out. Thanks
Click to expand...
Click to collapse
I am in love with the LiquidSmooth nightlies, however, for a daily driver I use HellFire. I would check out both.
Sent from my SGH-T999

vietthanh1206 said:
Hey I got my s3 running on Rootbox ROM. Do you have any idea how can I take screenshot in this ROM? LOL kindda stupid question but honestly I don't know how...
Click to expand...
Click to collapse
I don't use Rootbox ROM so I'm not sure, but most AOSP JellyBean ROM should support long press power + volume down buttons to take screenshot, just hold both down a little bit and it should take a screenshot. Some AOSP ROM has settings to include screenshot in the power menu (long press power button).

[email protected] said:
I don't use Rootbox ROM so I'm not sure, but most AOSP JellyBean ROM should support long press power + volume down buttons to take screenshot, just hold both down a little bit and it should take a screenshot. Some AOSP ROM has settings to include screenshot in the power menu (long press power button).
Click to expand...
Click to collapse
Mine does not take screen shot when press power and home at the same time. Btw I cant find where the power setting is in the setting app. Is it in rom control or rootbox setting?

vietthanh1206 said:
Mine does not take screen shot when press power and home at the same time. Btw I cant find where the power setting is in the setting app. Is it in rom control or rootbox setting?
Click to expand...
Click to collapse
Try ROM Control >> Power Menu (this is just a guess as I said, I don't use Rootbox). If it's not there, look in Rootbox setting. Also, it's power + volume down buttons, not home button.
S-beamed from my GSIII via xda premium

If you still just want the notification bar then you can ask Semorebutts123 who made the xperiaZwiz rom, it's based off the latest OTA and has an aosp like notification bar. Idk how he did it but it looks nice.

Viper Mod help

Im trying to get viper mod to work for my galaxy s3 but dont notice any difference in the stock music player and barely any difference in the google music player. I hear it is better than the acid audio mod but I'm not seeing results, am I doing something wrong?

I think I remember @TheLastSidekick had that on his rom. Maybe he knows what could be the problem.

aamir123 said:
Im trying to get viper mod to work for my galaxy s3 but dont notice any difference in the stock music player and barely any difference in the google music player. I hear it is better than the acid audio mod but I'm not seeing results, am I doing something wrong?
Click to expand...
Click to collapse
Aosp or Touch wiz?
(Stock music player could be Samsung's or Apollo)
It doesn't work on Aosp due to drivers.
When you install drivers select Cortex A9 With NEON
Reboot
Activate the equalizer from V4A. Also make sure you have the correct v4a version installed. There's one for 4.1.1 to 4.2.2 and 4.3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

TheLastSidekick said:
Aosp or Touch wiz?
(Stock music player could be Samsung's or Apollo)
It doesn't work on Aosp due to drivers.
When you install drivers select Cortex A9 With NEON
Reboot
Activate the equalizer from V4A. Also make sure you have the correct v4a version installed. There's one for 4.1.1 to 4.2.2 and 4.3
Click to expand...
Click to collapse
What if I dont wanna use the equalizer just wanna add bass? When I adjust the bass settings without enabling equalizer nothing happens. Also I don't get the option to select Cortex A9 with Neon, I only get high quality, super high quality and power saving as my options. I get some (very little) change when forcing compatibility mode. Im using tw 4.3.
I checked the driver status and it says no to processing everything else seems normal. Also I'm using headphones.

aamir123 said:
What if I dont wanna use the equalizer just wanna add bass? When I adjust the bass settings without enabling equalizer nothing happens. Also I don't get the option to select Cortex A9 with Neon, I only get high quality, super high quality and power saving as my options. I get some (very little) change when forcing compatibility mode. Im using tw 4.3.
I checked the driver status and it says no to processing everything else seems normal. Also I'm using headphones.
Click to expand...
Click to collapse
You should still be able to activate bass only if you leave all other settings alone as they were. You'll still need to check the first box I believe. If it's not asking you for Cortex A9 Neon, you're using the wrong installer (YOU NEED the drivers), or one that I don't know of. Try 4.3 from the market. Search for V4A FX 4.3 on the market.

TheLastSidekick said:
You should still be able to activate bass only if you leave all other settings alone as they were. You'll still need to check the first box I believe. If it's not asking you for Cortex A9 Neon, you're using the wrong installer (YOU NEED the drivers), or one that I don't know of. Try 4.3 from the market. Search for V4A FX 4.3 on the market.
Click to expand...
Click to collapse
Ok I'll do that, I got the zip from the official website but they only had 2 apk in the zip a gingerbread and 4.0 and up zip. Maybe that was my problem, didn't know the play store had it, Thanks! Will update after testing.

TheLastSidekick said:
You should still be able to activate bass only if you leave all other settings alone as they were. You'll still need to check the first box I believe. If it's not asking you for Cortex A9 Neon, you're using the wrong installer (YOU NEED the drivers), or one that I don't know of. Try 4.3 from the market. Search for V4A FX 4.3 on the market.
Click to expand...
Click to collapse
Well I installed the 4.3 version from the play store and installed driver. After reboot I checked driver status it says not enabled and not processing, even though I have viper enabled. Doesn't matter if equalizer was enabled or not

Totally weird. I know from experience that 4.3 Touchwiz functions with V4A from the market using Cortex A9 NEON drivers after a reboot.
I've done it three separate times and three more separate times on 4.1.2, something's got to be up with the install process. You may have to undo the other V4A changes (if it was a flashable and not an app) before this works then.

[MOD] Increase Over all Sound Volume CM11 4.4.2 (Flashable) (01-25-14)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
┌П┐(◣_◢)┌П┐​
THIS IS A WORK IN PROGRESS. THIS IS DESIGNED FOR THE SPRINT SAMSUNG GALAXY S3.FLASHING THIS MAY/WILL RUIN YOUR DEVICE. MYSELF & XDA ARE NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE.
what we have below is a modified system file that will increase your over all speaker volumes on your CM11 Based Aosp rom.
Click to expand...
Click to collapse
installation instructions.
Download Appropriate file place on internal or external sd. reboot to recovery flash zip. wipe cache & dalvik cache. reboot .....profit.
1. 80% Audio Mod Download
Click to expand...
Click to collapse
Please remember to hit thank you. plus let me know it worked for you as well.
Click to expand...
Click to collapse

I flashed this but I'm not hearing any gain with this mod on CM11. I've used your other sound increase mods (on both TW & AOSP ROMs) and they were excellent. This time no discernible difference. I did try manually replacing the snd_soc_msm_2x with your AOSP version, it boot looped so I went back to OEM. Ideas?

Ferenczy68 said:
I flashed this but I'm not hearing any gain with this mod on CM11. I've used your other sound increase mods (on both TW & AOSP ROMs) and they were excellent. This time no discernible difference. I did try manually replacing the snd_soc_msm_2x with your AOSP version, it boot looped so I went back to OEM. Ideas?
Click to expand...
Click to collapse
I'll look at it tonight. Works great for me.
Sent from my SPH-L710 using Tapatalk

im checking it out right now on Beanstalk 4.4.2...just creating a backup at the moment. is there going to be a fully boosted volume version? when i was on wicked sensations i had a sound mod extreme that i downloaded from their updater and i loved how loud that was. will post back in a few for the results
update: its a no go. did not increase the volume at all. tried flashing a few times and still nothing hopefully it gets fixed soon, i really love to have my phone loud. thank you for your work though.

Try this [first post updated new zip.

works great running liquid smooth 3.0 .Doesn't seem to have any effect on Bluetooth volume though. If there's a way to apply it to Bluetooth volume that would be great .I don't use wired head phones just Bluetooth so I can say if it works on wired headphones or not .
Sent from my SPH-L710 using Tapatalk

tempest6253 said:
works great running liquid smooth 3.0 .Doesn't seem to have any effect on Bluetooth volume though. If there's a way to apply it to Bluetooth volume that would be great .I don't use wired head phones just Bluetooth so I can say if it works on wired headphones or not .
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
more then likely i would have to search trough let me look at it. but now we have a over all speaker tweak. i did ringer speaker. voice speaker in call as well is louder.
first post updated

just tried it out on slimkat also works great on slim to.Thank you much for getting this working
Sent from my SPH-L710 using Tapatalk

tempest6253 said:
just tried it out on slimkat also works great on slim to.Thank you much for getting this working
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
it should work on any 4.2.2 aosp based roms.
also i don't think Bluetooth is going to happen louder. looked through the file nothing is jumping out at me.

kaos420 said:
┌П┐(◣_◢)┌П┐​
installation instructions.
Download Appropriate file place on internal or external sd. reboot to recovery flash zip. wipe cache & dalvik cache. reboot .....profit.
Please remember to hit thank you. plus let me know it worked for you as well.
Click to expand...
Click to collapse
worked great with my verizon galaxy s3 hellkat 4.4.2....thank u very much
Click to expand...
Click to collapse

Good looking out. Mod works on Sprint Hellfire as well.
Only two small issues. As someone else mentioned, it doesn't appear to effect bluetooth call volume. Another issue I've ran into is when I am in a call and switch to bluetooth, everything works fine. The next call I make will have very low volume. I have to decrease the volume and then increase it in order for it to work at regular volume.

Is there any way to undue this? I flashed it without first creating a backup and I don't want to restore a backup from weeks ago... I enjoy this mod for most things (listening to music, car aux, etc) but when I'm in a call with someone the lowest volume setting blows my eardrum.. I have to hold the phone about 2 inches away from my ear.

zimmertr said:
Is there any way to undue this? I flashed it without first creating a backup and I don't want to restore a backup from weeks ago... I enjoy this mod for most things (listening to music, car aux, etc) but when I'm in a call with someone the lowest volume setting blows my eardrum.. I have to hold the phone about 2 inches away from my ear.
Click to expand...
Click to collapse
Ya you should of nandroided. Replace your rom.. Only way.
Sent from my SPH-L710 using Tapatalk

i flashed this on note3 running carbon 4.4.2, i dont see any difference, should i uninstall dsp manager???

tsunami2312 said:
i flashed this on note3 running carbon 4.4.2, i dont see any difference, should i uninstall dsp manager???
Click to expand...
Click to collapse
It's not for the note3.thats why it doesn't work. But that maybe my next device.
Sent from my SPH-L710 using Tapatalk

I flashed this mod on a few different ROMs and definitely noticed a huge difference in the speaker volume. The wired headphones seem to stay the same. This is awesome though, no more sleeping through alarms!

It works great now! But I get a couple random reboots after flashing this. Idk what it could be due to
Sent from my SPH-L710 using Tapatalk

Thanks for this I flashed it on my friends s3 after him complaining it was too low volume. Now he doesn't even complain

Thank you for this!!! Works as advertised on carbon nightly 3/3. Now i don't have to ask everyone to speak up.

Running flawless here too, SlimKat stable. Thank you very much!!
Sent from my SPH-L710 using Tapatalk

[APP]ViPER4Android FX

I can confirm this app working on rooted stock. We the apk I had, not sure about other versions of the app but I'll share I'll with you all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm also adding this head crushing bass profile if you listen to rock and want some face smashing sound quality. Enjoy
App
https://www.dropbox.com/s/197jok2wwevpn7t/ViPER4Android_FX_A4.x.apk?dl=0
Equalizer
https://www.dropbox.com/s/lotfftpc3gs65dd/superbass.prf?dl=0

Thank you so much!

I was missing ViPER .... I haven't found any good EQ's even on the varies music players.
Thanks!

Will it work on non-rooted devices?

RaymondPJR said:
Will it work on non-rooted devices?
Click to expand...
Click to collapse
Unfortunately no, when you run the app for the first time, it prompts you for root access to install audio drivers required

iunlock said:
I was missing ViPER .... I haven't found any good EQ's even on the varies music players.
Thanks!
Click to expand...
Click to collapse
There is a thread that does IRS requests so you can use it conjunction, to get you to that right sound.

Viper4Android FX v2.3.3.0 not working with Spotify
i'd just a bought a Note4 N910U (HK version). Rooted perfectly with CF, so that i could use V4A with Spotify just as i did with my i9505, but not joy. V4A, works with Google Play though - I checked the driver status in V4A, and it says processing = Yes. Not so with Spotify.
I've have tried disabling SoundAlive and AdaptSound. I've also moved V4A using TI backup to system app.
Any hints?
Thanks in advance

XxSilent.NightmarexX said:
I can confirm this app working on rooted stock. We the apk I had, not sure about other versions of the app but I'll share I'll with you all.
I'm also adding this head crushing bass profile if you listen to rock and want some face smashing sound quality. Enjoy
App
https://www.dropbox.com/s/197jok2wwevpn7t/ViPER4Android_FX_A4.x.apk?dl=0
Equalizer
https://www.dropbox.com/s/lotfftpc3gs65dd/superbass.prf?dl=0
Click to expand...
Click to collapse
Yeah it works perfectly for me . I installed apollo music also .. Kida like the combo..
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
jadow5354 said:
i'd just a bought a Note4 N910U (HK version). Rooted perfectly with CF, so that i could use V4A with Spotify just as i did with my i9505, but not joy. V4A, works with Google Play though - I checked the driver status in V4A, and it says processing = Yes. Not so with Spotify.
I've have tried disabling SoundAlive and AdaptSound. I've also moved V4A using TI backup to system app.
Any hints?
Thanks in advance
Click to expand...
Click to collapse
have you went into to Settings>Sound>Music Effects> Then choose ViperFX for your Default? You can always uninstall then reeinstall make sure you didnt miss the disable LPA

Thanks for speedy reply.
yeah, i had changed the sound settings too.
The other thing i did just now was edit my build prop. My original build.prop didn't have the lpa lines in there, so i added it in - it was a bit gutsy as i didn't fancy restoring my rom on day 2 of having the note 4. Restarted, and again, no joy.
Does anyone else have V4A working with Spotify on Note 4?
spirodave said:
Yeah it works perfectly for me . I installed apollo music also .. Kida like the combo..
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
have you went into to Settings>Sound>Music Effects> Then choose ViperFX for your Default? You can always uninstall then reeinstall make sure you didnt miss the disable LPA
Click to expand...
Click to collapse

jadow5354 said:
Thanks for speedy reply.
yeah, i had changed the sound settings too.
The other thing i did just now was edit my build prop. My original build.prop didn't have the lpa lines in there, so i added it in - it was a bit gutsy as i didn't fancy restoring my rom on day 2 of having the note 4. Restarted, and again, no joy.
Does anyone else have V4A working with Spotify on Note 4?
Click to expand...
Click to collapse
V4A works system wide for me, what level of sound did you add on the setup?

XxSilent.NightmarexX said:
V4A works system wide for me, what level of sound did you add on the setup?
Click to expand...
Click to collapse
tried all 3 of them buddy... battery saving, high quality and super high quality.
i only use Spotify for my music needs, so it's bit frustrating v4a ain't working on my N910U, whereas it was perfect on i9505 Though like i said, it works fine in Google Music.
i've been thinking about the differences between i9505 and N910U, and maybe its could be 4.4.4 or the new touchwhiz, but then if you guys have got Spotify working on your N910x then i'm probably going to have put some extra time aside and maybe start from scratch... :crying:
That said, Note4 has only just got released in some countries the other day so maybe others might have a similar prob and an easy fix...

jadow5354 said:
tried all 3 of them buddy... battery saving, high quality and super high quality.
i only use Spotify for my music needs, so it's bit frustrating v4a ain't working on my N910U, whereas it was perfect on i9505 Though like i said, it works fine in Google Music.
i've been thinking about the differences between i9505 and N910U, and maybe its could be 4.4.4 or the new touchwhiz, but then if you guys have got Spotify working on your N910x then i'm probably going to have put some extra time aside and maybe start from scratch... :crying:
That said, Note4 has only just got released in some countries the other day so maybe others might have a similar prob and an easy fix...
Click to expand...
Click to collapse
Maybe it has to do with the exynos chip you have, let me make sure Spotify works for me because I rarely use it.

what directory do you put the .prf bass file in?
thanks

wase4711 said:
what directory do you put the .prf bass file in?
thanks
Click to expand...
Click to collapse
Open viper up, press menu, new profile, save it as something random just so viper can make a directory and then save it under viper/kernel folder. You should see that the one you created should be there as well. Then press menu again on the app and press load profile and you should see the bass one

for some reason, my menu doesn't have the "new profile" option in it
viper is working, and sounds great, I just wanted to try your .prf profile..
do I need to load the viper xhifi too?
thanks

wase4711 said:
for some reason, my menu doesn't have the "new profile" option in it
viper is working, and sounds great, I just wanted to try your .prf profile..
do I need to load the viper xhifi too?
thanks
Click to expand...
Click to collapse
I'm sorry it's save new profile. And xhifi is implemented on this one so everything is set up

thanks man, I forgot how to work with viper, since I havent had it on my phone in over a year!
I'm out of thanks for the day, but I owe ya a couple!:good::good:

What version of viper xhfi was used?

demon28 said:
What version of viper xhfi was used?
Click to expand...
Click to collapse
The latest xhfi was implemented into this app.

Viper is the only reason I root my devices.