Develop Bugs

Need help with CDMA Work shop to get msl

Msl reader isnt working for me gives me a error. I put it on modem for both. have dev mode disabled. I run cdma workshop connect to port 2 hit read spc an get a error "Phone ask for SPC. SPC (6 digits) is required. Check "security" tab - "SPC" section."
I really need my MSL to fix my mms and Update my prl because i get a error everytime i try to.
Idk if this is info thats needed but i am rooted 2.2 rom
Am i supposed to enter a SPC before hand... lol or am i just missing something.
Edit: I also have the samsung drivers installed and am using the same cable i rooted with last night. The error i get with MSL reader is "ERROR: /dev/smd0 does not exist. This phone is not compatible."

I'm guessing you already tried this
gokuman56 said:
EDIT: Easier Way to get MSL. Okay so you have to download connectbot from the Market
1. Open ConnectBot
2. Agree Next Next Yada Yada
3. Press SSH and select Local
4. type in whatever you want by local and press enter
5. ok once you see a black screen and to the left a cash sign, type in "getprop" without the quotes
6. You should see a lot of words, scroll up all the way at the top.
7. Near the middle of the screen until you see [ril.MSL]
8. It will be 6 digits and that's your MSL
Click to expand...
Click to collapse
Are you trying to push a new PRL to the phone?
look here

Goto security, then send the default samsung password at the bottom left corner..
Then top right of the the tab click read spc.. the spc is the msl
Sent from my SPH-D700 using XDA App

Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\

lgevo said:
Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\
Click to expand...
Click to collapse
Doubtful but not impossible
Try this then see if it works
excerpt from 4g signal mod
1. Dial ##3282#
2. It will open a menu, click WiMAX and enter MSL. Note: 4G radio must be on.
3. Go to extensions and Hold EntryRX and Write Extension
4. Change the Value from -89 to -110 (The Lower the weaker the signal can be for the phone to connect.)
5. Change EntryCINR to 0004
just get to step 2 and see of it accepts your MSL

Lol wow it did thanks guys!

[Q] Help! Have HTC Evo and Even MSL Reader Won't Read Correct MSL

Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.

download msl reader from the market, and it'll give you the 6 digit code. You can remove the battery from the phone, and read off the meid number, and make sure the information matches the actual phone you have.

I'm not sure I understand. I have downloaded a msl reader and it did not work. Are you advising I download an another/different msl reader?

Naw, its the same one. The app asks for super user permissions, then gives you a 6 digit code? Also, your bootloader shows s-off?

WhoreDog said:
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
Click to expand...
Click to collapse
You may want to do a Factory Reset from Menu > Settings > SD & phone storage > Factory data reset.
After the phone reboots, it may go through the hands free activation. If it does, you're set. If not, by this time you should be able to enter the MSL. I would recommend doing a Data Profile restore by opening up the virtual keypad, typing ##DATA#, entering your MSL, going to Edit Mode and then selecting Data Profile. You'll be taken to the Data Profile page. Once you're there, press the Menu button on the phone and tap on the Restore option. Phone will reboot.
I did this even after rooting with Unrevoked3 and encountering the same issue and it worked.

[Q] Removing Activation?

Hello, I purchase an Verizon Incredible from ebay, it's ezn thingy is clean but I live in the UK. I need the phone activated but can't activate it here as the number it dials doesn't connect since it' cdma. I was wondering if there was a rom or mod that can remove the activation and/or the phone functionality as I would just like to use it as a media device?
any help on this, would be greatly appreciated,
thank you

If you are wanting to install a new rom just skip the activation. Take cyanogenmod for example when the activation screen comes up with the android on it, press the four corners around the screen and it will skip activation. I think the skip is pretty standard across rom but I'm not 100% on that. It does work on Cyanogenmod though.

-xipher- said:
Hello, I purchase an Verizon Incredible from ebay, it's ezn thingy is clean but I live in the UK. I need the phone activated but can't activate it here as the number it dials doesn't connect since it' cdma. I was wondering if there was a rom or mod that can remove the activation and/or the phone functionality as I would just like to use it as a media device?
any help on this, would be greatly appreciated,
thank you
Click to expand...
Click to collapse
Is the phone rooted and s-off?

*NOTE: you need to be using a ROM that has EPST.apk (Sense or stock based) in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Hope this helps. Worked for me with no issues.
Sent from my ADR6350 using xda premium

CondemnedSoul said:
*NOTE: you need to be using a ROM that has EPST.apk (Sense or stock based) in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Hope this helps. Worked for me with no issues.
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
Do you have the original numbers for verizon in the US? i had it written down but can not find it.

How can change MSL to 000000 Sprint V4.3

How can change MSL to 000000 Sprint V4.3
i have MSL code ,but need to change it to 000000
old method with V412 not work
please help

MSL utility
Jxt. said:
How did you get your code?
Click to expand...
Click to collapse
I used this App, it worked for me
MSL utility

You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.

good job
done:good:
done
thanks:highfive:

t
angelglz said:
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
Click to expand...
Click to collapse
please explain more. i have downloaded it but the "2" is not understandable by me
update
i understand the number 2 but "Read the actual SPC." is the one giving me problem , though i am using 3.7 verison and i am using sprint s4.
what will i do?

Help Extracting SPC from EFS Backup

I have a rooted and bumped LG G3 D855. I have been investigating enabling additional LTE bands using QXDM, QPST, CDMA workshop, etc. and have accidentally changed my SPC code. Initially the phone would accept the default SPC of 000000 but now it will not. I have an EFS backup from TWRP. Can anyone help me examine these files to determine my "new" SPC code?
I can still continue my LTE work using QXDM since I can still write to certain NV items without the SPC code but I would still like to recover it.