Develop Bugs

How to Unlock Vogue CDMA

Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me

Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx

This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network

I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?

I used this ..so easy

so if you activated your phone for india service, would you be able to use it in the United States?
--James

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.

dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?

NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.

Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82

Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?

''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..

Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me

Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT

Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks

puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.

dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???

that's great thank you man

Thank you. it was more then easy.
Now it works.

help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.

[ANSWERED] - Bypass activation

Well folks, I need help. If anyone could tell me how to bypass activation on a Droid Incredible with the latest (current) OTA, it would be greatly appreciated. Only other thread I could find was: (can't post the link as I'm a new user)
This solution won't work as I am not in a coverage area. Ok, so why do I want/need this functionality? I'm deployed to Iraq. My Incredible is under military suspension. After the recent OTA (yip, got it over wifi), I wiped my Incredible. I thought activation was a skippable step, but it's not. So, I'm hoping to get help with this. Worst case? I have a brick until I return stateside and re-activate the phone.

i think this might work, give it a whirl
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".

Not sure how but I'm almost positive it is possible to manually activate. The only thing is you have to type in the correct MIN code. If you got access to a land line just call up Verizon and they should be able to walk you through it and give you the code. Here is what they will have you do: http://www.peteralfonso.com/2010/07/activation.html

Four Corners
When activation request screen appears, try the four corners approach. I read here on XDA and elsewhere - you touch in this order/sequence the top left, top right, bottom right, bottom left corners of the screen, and activation is bypassed.
Please post whether this worked for you - and, MOST importantly, thanks for serving!

magneticzero said:
i think this might work, give it a whirl
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Click to expand...
Click to collapse
This worked, thank you.
Now, a follow up. What's the ideal way to program the phone when I get back to the states?
-just dial #228?
-input the original numbers for those settings?
-factory reset than activate?
-something else?

jaykresge said:
This worked, thank you.
Now, a follow up. What's the ideal way to program the phone when I get back to the states?
-just dial #228?
-input the original numbers for those settings?
-factory reset than activate?
-something else?
Click to expand...
Click to collapse
*22899 and press send. it will reprogram your phone number and data settings, i also beleive it updates your PRL all in one step. or just *228(option 1 to program your phone) then call again and do option 2 to update the PRL.

Thanks again, you've been a great help!

ive been following the #778 method, but it wont let me change the MDN.
Can anyone shed some light on this?

[Q] any way to wipe your number off the device?

is there any way to wipe your number off the device? i'm talking about from the status section in settings, is it possible, i've run the ruu, flashed roms etc, and nothing my number sticks on to it...

Wouldn't you have to activate another phone before your number is removed from this phone?

SlimSnoopOS said:
Wouldn't you have to activate another phone before your number is removed from this phone?
Click to expand...
Click to collapse
I'm using my gnex as my primary

*NOTE: you need to be using a ROM that has EPST.apk (Sense or stock based) in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Hope this helps. Worked for me with no issues.
Sent from my ADR6350 using xda premium

CondemnedSoul said:
*NOTE: you need to be using a ROM that has EPST.apk (Sense or stock based) in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Hope this helps. Worked for me with no issues.
Click to expand...
Click to collapse
This worked for me, thanks. To commit changes though I had to hit the menu button and then select commit.

To further add to the thread, if you want a few more options of what to change and clear then check out
http://www.cdma-ware.com/workshop.html
CDMA Workshop. It'll let you change ESN's, phone number, carrier name, push custom PRL versions, etc. Of course changing the ESN doesn't mean it'll work.. because it needs to be activated through the carrier and it also has to be a valid ESN -- but if you bought a used phone off eBay or whatever and are looking to have it as a music player/camera, this is best.

POQbum said:
To further add to the thread, if you want a few more options of what to change and clear then check out
http://www.cdma-ware.com/workshop.html
CDMA Workshop. It'll let you change ESN's, phone number, carrier name, push custom PRL versions, etc. Of course changing the ESN doesn't mean it'll work.. because it needs to be activated through the carrier and it also has to be a valid ESN -- but if you bought a used phone off eBay or whatever and are looking to have it as a music player/camera, this is best.
Click to expand...
Click to collapse
Isn't changing your ESN/MEID illegal?

anekdotos said:
Isn't changing your ESN/MEID illegal?
Click to expand...
Click to collapse
Just looked it up and it looks like the law that everyone is pointing to saying it's illegal is very vague. But it still remains that yea, it's potentially illegal (which I didn't know before)
So use at your own risk if you're going to do that.
CDMA workshop is still great for many other changes though.

MetroPCS for Epic 4G Data Issue

Hi Guys I have not been able to enable data on my Epic 4G, calls, text function properly the only issue is data it just doesn't work. What can Fix it? Any help? Thanks

Wrong section
Sent from my SPH-D700 using XDA

Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html

4g data connected but not able to surf the net
tichs said:
Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html
Click to expand...
Click to collapse
Where I can get this app "Network"?

Some of those steps are placebo, and unnecessary. That will only get you 1x internet, and dependent on your location you may/may never get 3g to work they've been blocking off more cities from flashed phones from getting 3g..
Sent from my SPH-D700 using xda premium

[Q] Anyone have 0/12 IMEI number but network semi work and EFS missing NV_data.bin

I installed the jedi mind trick JB6 rom a week ago and everything worked great up until a few days ago. Now my phone when connected to wifi can't access the play store, gmail and other apps. I can receive/make calls through wifi calling and texts just not internet data. As soon as i turn wifi off everything works normal. So I checked my Imei and it showing up as 0 / 12 . Anyone else experience this and is there a fix for it. I already tried restoring my EFS folder but the two needed files are not there and I never made a backup.
h t t p s :// w w w . dropbox. c o m /s/gqawvt7qgscmjeh/Screenshot_2013-08-15-18-18-44.png

johnerici said:
. So I checked my Imei and it showing up as 0 / 12 . Anyone else experience this and is there a fix for it. I already tried restoring my EFS folder but the two needed files are not there and I never made a backup.
h t t p s :// w w w . dropbox. c o m /s/gqawvt7qgscmjeh/Screenshot_2013-08-15-18-18-44.png
Click to expand...
Click to collapse
I have this phenomenon on my SGS2, and have had it such since January after flashing an Embryo ROM. I'm not sure how it happened, I used to think Embryo borked it but no other users reported anything similarly happening to them.
However, I have no issues with data or anything else problematic occurring as a result of the IMEI being 0'd. Everything works fine. I use Straight Talk, so I think IMEI blacklisting doesn't apply to me, but it may be a factor in your case, as ATT/T-Mobile are more stringent now about EFS tampering etc. because they now blacklist handsets.
QPST or somesuch, a Squidbox, or Riffboxing type of repairs may remedy the problem. Try using a different SIM for another network and verify it's not a carrier specific issue. Also, try going back to stock and doing an EFS restore via the Service Menu from stock Dialer. (*#*#197328640#*#*)
Also, to save any trouble; Odin will not help you, as the EFS partition is handled seperately unless you check the box to clear EFS...which will also not help you.
GL.

1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Then download EFS Professinal from http://forum.xda-developers.com/showthread.php?t=1308546
14. Extract and open efs professional and click on Qualcomm NV Tools
15. You must see your device in "Available COM Ports"
16. Now click on "connect", it will show "SPC was accepted by the phone".
17. Now just see the "IMEI Repair"column, it will show blank or '0'.
18. Now type your IMEI number infront of "IMEI" and click "Write IMEI".
19. Thats it.
Incase you dont know the IMEI of your device, just check the mobile box or it is written in a label inside the mobile below the battery. Hope this helps...

Thanks guys, the imei showing up as 0 wasnt the problem everything works now. it turned out to be the proxy settings i setup for ad blocker was blocking data when connected to wifi.

nikunj0202 said:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Then download EFS Professinal from http://forum.xda-developers.com/showthread.php?t=1308546
14. Extract and open efs professional and click on Qualcomm NV Tools
15. You must see your device in "Available COM Ports"
16. Now click on "connect", it will show "SPC was accepted by the phone".
17. Now just see the "IMEI Repair"column, it will show blank or '0'.
18. Now type your IMEI number infront of "IMEI" and click "Write IMEI".
19. Thats it.
Incase you dont know the IMEI of your device, just check the mobile box or it is written in a label inside the mobile below the battery. Hope this helps...
Click to expand...
Click to collapse
I am having a similar problem. When I try the above *#7284# or *#9090# codes I can't get into the menu's to change the settings. I get a error that says,"mobile network not available". My IMEI number is bad and I can't get on the network at all. Is there a way to make this work?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

bornofHim said:
I am having a similar problem. When I try the above *#7284# or *#9090# codes I can't get into the menu's to change the settings. I get a error that says,"mobile network not available". My IMEI number is bad and I can't get on the network at all. Is there a way to make this work?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Just take a backup, hard reset your phone and again follow the steps. If it doesn't work, just try to update or change the ROM and try again. Hope this helps.

When i was on a custom rom the debug menu wouldn't show up , make sure you go back to stock rom.

johnerici said:
When i was on a custom rom the debug menu wouldn't show up , make sure you go back to stock rom.
Click to expand...
Click to collapse
Some custom ROMs ie any new aosp ROM hides developer options, u need to go to system settings/about phone and tap build number 8x and it will unlock the menu for u...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app