Develop Bugs

[Q] Help! Have HTC Evo and Even MSL Reader Won't Read Correct MSL

Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.

download msl reader from the market, and it'll give you the 6 digit code. You can remove the battery from the phone, and read off the meid number, and make sure the information matches the actual phone you have.

I'm not sure I understand. I have downloaded a msl reader and it did not work. Are you advising I download an another/different msl reader?

Naw, its the same one. The app asks for super user permissions, then gives you a 6 digit code? Also, your bootloader shows s-off?

WhoreDog said:
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
Click to expand...
Click to collapse
You may want to do a Factory Reset from Menu > Settings > SD & phone storage > Factory data reset.
After the phone reboots, it may go through the hands free activation. If it does, you're set. If not, by this time you should be able to enter the MSL. I would recommend doing a Data Profile restore by opening up the virtual keypad, typing ##DATA#, entering your MSL, going to Edit Mode and then selecting Data Profile. You'll be taken to the Data Profile page. Once you're there, press the Menu button on the phone and tap on the Restore option. Phone will reboot.
I did this even after rooting with Unrevoked3 and encountering the same issue and it worked.

[Q] How to get MSL with CDMA Workshop for ET4G?

Does anyone how retrieve the MSL code using CDMA Workshop for the Epic Touch? I can easily do it with any HTC phone but it doesnt work with the Epic Touch. I know that you can it easily get it with an app but Im not rooted. Also for whatever reason when I activate a phone to my Sprint account they alway give a MSL code that doesnt work so I always have to get MSL code myself to finish activating the phone. Thanks for anyone who helps.

From a terminal or adb shell just type "getprop ril.MSL"
Sprint used to give the MSL and the One Time Key online. Now they just give you One Time Key, which isn't that useful if this isn't the first activation.

1. Download connectbot from market and type getprop ril.MSL
2. Call sprint and tell them you are traveling overseas on a business trip. This method worked just last week with only two tries. First attempt was shot down when I told them that I was a dev and needed msl to complete my project. As soon as I got off the phone, i called right back and told them that Im traveling overseas on a business trip and the rep gave it to me right over the phone.

To get CDMA Workshop to read the MSL, you first need to dial ##8778# and then choose "all". Afterwards, load up CDMA Workshop and connect to it like you would your HTC phones. Go to the security tab and choose custom password and send "01F2030F5F678FF9". After that just read spc and you'll have your msl!

Thanks for the help but the getprop ril.msl only works for rooted phones.
but beserker15 your method work great. thanks

kali323 said:
Thanks for the help but the getprop ril.msl only works for rooted phones.
Click to expand...
Click to collapse
Glad you got what you needed. getprop works on stock unrooted. It is case sensitive. "getprop ril.MSL" not "getprop ril.msl"

1. Open Dialer on phone
2. Dial ##8778#
3. Connect phone to computer. (hope you have the drivers or Kies installed)
4. Start/ Right Click Computer/Select Manage Computer.
5. Select Device Manager
6. Find What Com Port your Sammy is on.
7. Open CDMA WS
8. Select Com port and USB
9. Click Connect
10. Click Read
11. Select the Security Tab
12. Password Select Samsung Default. If that isn't there click where you enter one and enter this; 01F2030F5F678FF9. Click Send
13. Look in the box under SPC and see your MSL.

[Q] FF11 gives me zero 3g, no data connection at all!

Went to FF11 from stock el29 and I do not get a signal at all. I don't know why but it doesn't matter where I go. I have traveled a couple hours around my area and still no signal. Not even 3g icon appears. This can't be the OTA could it?! Or am I missing something?

update profile and prl

I was getting the same if you turn on airplane mode turn off then reboot it will come back.
Sent from my SPH-D710 using xda premium

did all the above mentioned
thanks for the advice but i've done those things several times, also tried out 5 different modems...can't find one to even get the 3g icon on...weird bc it shows 4 solid bars but no 3g or data

Possible Sprint outage in your area. Its been happening a lot lately.

you could try doing that reactivation thing too...
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.

vanberge said:
you could try doing that reactivation thing too...
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.
Click to expand...
Click to collapse
This is probably the best advice you'll get. After fudging with network settings for days trying various tweaks and crazy ideas of mine, I doinked mine completely too. This does a 'factory reset' on your network settings. You'll have to 'activate' your phone afterwards and should also then do a PRL update and Network update again just to make sure.
edit. I'm assuming you used sfhub's stock rooted one-click. If you didn't - do that first!

Yeah, highly suggested the full wipe, not the nodata, version.

Huh?
vanberge said:
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.
Click to expand...
Click to collapse
I have no idea how to do that.

Jroocan83 said:
I have no idea how to do that.
Click to expand...
Click to collapse
He is trying to get you to clear out your NVRAM, which is where the network programming information is stored. The MSL is a unique code for your phone that allows for many different diagnostics on your phone, including a full wipe, NVRAM wipe only, editing your data settings, and much much more. It is used in conjuntion with different codes you can put into your dialer, all following a ##_____# format.
The reason this might help is because no matter how many times you flash, the NVRAM never gets touched. So forcing this information to reset itself will basically re-attach it to the network.
An easier way to get your MSL is to go to the market and download Get My MSL. Run the program and it will kick out a 6 digit number. Write down that number.
Then go to the dialer and and punch in ##72786#. This will then prompt you for you for your MSL. It will then bring up a window that says SCRTN. Hit yes on that window, and it will wipe your programming out. The phone will reboot and reactivate itself.
It's kind of the end all be all of profile updates. If this doesn't work, nothing will. You will either have to go back to GB, or, if you live in a major city, wait for them to finish working on your tower, as it is likely that they are flipping it over to be the new Sprint towers that have better signal and support LTE.

Jroocan83 said:
I have no idea how to do that.
Click to expand...
Click to collapse
You need a terminal emulator. I assume any of them will work, but I use this. Open said terminal emulator, and type in the command "getprop ril.MSL" without the quotes. It should return a number (mine was 6 digits, I assume they're all 6 digits). This is your MSL. Note the command is case sensitive, meaning getprop ril.msl will not work.
Now open the dialer, like you were going to make a phone call, and type ##72786#. I believe you then push the green "send" button, and then type the MSL. That should send a signal to reprogram your phone's radio from Sprint. (Note I may be slightly incorrect on this part, I've never really had a reason to do this myself).

A little more info would help a lot like, How did you update to FF11? Also did you do a full wipe before updating to FF11? You might have to do a clean wipe! And odin is the best way (safest) to install ICS in my opinion. Could be a modem problem also. Id reflash back to gingerbread with odin, wipe clean with Caulkulins format all zip, then odin back a fresh install of FF11. Always follow the safest ways to flash and you will have better chances of having a good running rom.

[HOW-TO] Flash Sprint Galaxy S3 to metropcs with 3G speeds..

Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".

Help
kipster3001 said:
Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".
Click to expand...
Click to collapse
i tried this and dont know why my s3 keep saying Sprint and it dosent receive calls o text...
Can you please please help me if i do something wrong

Working Talk Text and Data
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
What I did,
Step 1.
Install Samsung Drivers
Install Kies (To update: I was on 4.1.1 now I'm running 4.1.2)
Step 2.
Root Samsung Galaxy S3. I used Casual one click (It's literally one click)
- Google search key phrase 'root verizon samsung galaxy s3 casual one click'
Step 3.
Now you should have SuperSU
Download
1. APN Manager- I have APN Manager Pro
2. Titanium Backup
Step 4.
I used Titanium Backup to uninstall all the Verizon bloatware, and overall junk I don't use. With removing bloatware click on backup/restore then select and hold APN Manager Pro (or whatever) and select convert to system app.
Step 5.
If not updated to 4.1.2, do so. - You'll need to have the ability to add an APN, only possible with 4.1.2.
I bypassed setting the language etc. with the four corners technique. Google Keyword: 'android four corners trick'
Step 6.
I went out and activated a MetroPCS plan, and got a simcard. At this point I could make and receive calls and text, but no data or mms.
Step 7.
From APN Manager Pro I clicked insert new APN. this can also be done from settings -> More settings -> Mobile Networks -> Access Point Names -> More options soft key: Add new access point. (Updating from phone settings in my opinion is simpler)
Step 8.
New APN
Name: "fast.t-mobile.com" (You can put whatever you want)(without quotes)
APN : "fast.t-mobile.com" (without quotes)
MMSC: "htetep:mms.msg.eng.t-mobile.com/mms/wapenc" (without quotes.Sorry i think you understand what i mean, please put in the letters and not htetep)
MCC: 310
MNC: 260
make sure APN is enabled is checked
Everything else has 'Not set', my APN protocol also says IPv4
Step 9.
Close settings completely
Go back to settings --> Access Point Names to make sure it is still there. Select it if not selected already.
Step 10.
Power off
pull out battery and sim card
wait 10 sec
power on
Step 11.
Enjoy data and mms.

Thank you guys for the instructions, I think I'm about to do the same for my Verizon S3.
But before I do, can you guys post what kind of speed you're getting on the new Metro(GSM)/T-Mobile 3G network?
I remember MetroPCS original 3G on CDMA was horrible and I just want to make sure the Verizon S3 won't suffer the same faith.
Thanks again in advance for you input!

Has anyone tried this with either JB? My phone is on the 4.3 update and I was wondering if it will work.

trinibmw said:
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
Click to expand...
Click to collapse
Your post is very promising to me since I'm looking to do the exact same thing and not looking forward to the complicated process detailed in the OP. I have a few clarifying questions I hope you don't mind answering for me:
1) Are you limited to 2G and 3G only, or are you able to have 4G/LTE connections?
2) Sorry to oversimplify your method, but boiled down, it sounds like you accomplished exactly what I want to do more or less by simply rooting, debloating, and changing the APN settings. Is this accurate? (Yes I've read your post all the way through five times+, I get there are certain important details to follow, but is my summary correct?)
3) I get the feeling you won't be able to answer this one, but worth a shot: Do you have any idea if this will work if the Verizon S3 came with KitKat (4.4.2) installed? Exhaustive research tells me it's impossible to downgrade android versions from this version.
Thanks for sharing this, and hopefully any answers you can give me. I'll be updating my post on whether or not it works for me when I try later

You are correct, root + debloat, change APN settings. When I had the phone I was limited to 3g speeds. I was still able to use maps, and surf without pulling my hair out. Although, most everywhere I went had wifi so I just ended up using that. As far as number 3, I am not sure. I no longer have the phone. Does the APN show up in network settings now? Could you just try the settings above? You could check if casual one click supports 4.4.2. If it does, you could give it a shot. I didn't have to use it, but if anything goes wrong use ODIN to restore your phone.

My sprint Samsung s3 has no card slot, and I'm with metro, can I use this method and get my metro plan on my s3??? Please need help!!!

[Q] [AOKP] Questions for AOKP rom

Got a few questions specifically regarding the new aokp JellyBean rom for the Epic, and I thought I'd post them here since the original thread got shut down:
1. Is there any way to get the "enter" button to not send messages in the SMS application?
2. Is there any way to prevent the "mount your USB storage!" popup from coming up every time the device is connected to a computer?
3. Back on the samsung based roms, I was able to to type ##debug## to get to a menu where I could force 1xrtt mode for extremely low signal situations. In the new rom, I found you can get to that same menu by typing in *#*#debug#*#*, but any screen prompting for the msl code is now impassable. I know my msl code, but it gives me a "modem error" no matter what I type and asks "modem exception occurs", to which the only option is "yes" (clicking it just closes the application).
Any way to get around this?
Thanks
b

Bill720 said:
Got a few questions specifically regarding the new aokp JellyBean rom for the Epic, and I thought I'd post them here since the original thread got shut down:
1. Is there any way to get the "enter" button to not send messages in the SMS application?
2. Is there any way to prevent the "mount your USB storage!" popup from coming up every time the device is connected to a computer?
3. Back on the samsung based roms, I was able to to type ##debug## to get to a menu where I could force 1xrtt mode for extremely low signal situations. In the new rom, I found you can get to that same menu by typing in *#*#debug#*#*, but any screen prompting for the msl code is now impassable. I know my msl code, but it gives me a "modem error" no matter what I type and asks "modem exception occurs", to which the only option is "yes" (clicking it just closes the application).
Any way to get around this?
Thanks
b
Click to expand...
Click to collapse
1: press the function key before enter.
2: No idea.
3: Have you tried using voice search to access the menu? Also, you could buy ROM Control for this.
Sent from my SPH-D700 using Tapatalk 2

2. Turn on USB debugging in Settings - Developer Options. If you can't find it, go to Settings - About phone, tap Build number 7 times and return.
Sent from HTC Incredible S @ CM10.1

cq
nikon120 said:
1: press the function key before enter.
Click to expand...
Click to collapse
Sorry, I should've been more specific. I was actually aware of this, but I was hoping that there would be a way to change this functionality on the stock messaging application so that I don't have to hit the Fn key to get the enter button to do what it's supposed to do.
nikon120 said:
3: Have you tried using voice search to access the menu? Also, you could buy ROM Control for this.
Click to expand...
Click to collapse
It's not that I can't access the menus, it's that some parts of the menus prompt for my MSL code before I can access them, and for some reason, typing in my MSL code (000000) doesn't do the trick anymore, it just gives me that "Modem Error" and lets me know that a "Modem exception occurs". My only choice in the dialog is "Yes", but that just exits the menu completely.
AndyYan said:
2. Turn on USB debugging in Settings - Developer Options. If you can't find it, go to Settings - About phone, tap Build number 7 times and return.
Click to expand...
Click to collapse
I actually do have USB debug enabled already and a widget to easily toggle it off for use with computers that don't have the driver installed. I see the popup upon USB connection with USB debug enabled or disabled.
b

Bill720 said:
It's not that I can't access the menus, it's that some parts of the menus prompt for my MSL code before I can access them, and for some reason, typing in my MSL code (000000) doesn't do the trick anymore, it just gives me that "Modem Error" and lets me know that a "Modem exception occurs". My only choice in the dialog is "Yes", but that just exits the menu completely.
Click to expand...
Click to collapse
I'm not sure if you're saying your MSL code is 000000, or if you were using zeros as placeholders. If you are saying that your MSL is 000000, that would be very unlikely. To get your correct MSL, use a Terminal Emulator of your choice and type "su" and press enter, then "getprop ril.MSL" press enter again and you should see your MSL. Also, you wouldn't happen to be using a NS4G modem, would you? I'm not too sure on ways to fix this, because it hasn't happened to me.
Sent from my SPH-D700 using Tapatalk 2

q
jeffreyjicha said:
I'm not sure if you're saying your MSL code is 000000, or if you were using zeros as placeholders. If you are saying that your MSL is 000000, that would be very unlikely. To get your correct MSL, use a Terminal Emulator of your choice and type "su" and press enter, then "getprop ril.MSL" press enter again and you should see your MSL. Also, you wouldn't happen to be using a NS4G modem, would you? I'm not too sure on ways to fix this, because it hasn't happened to me.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Good question - My MSL is, as a matter of fact 000000, (I even doublechecked with the terminal on the off chance that something changed it) because I changed it to that to make it easier to access in CDMA workshop, qpst, and qxdm back when I was working to clone my old phone's service so that I could continue using my sprint sero $30 unlimited data plan.
As for the modem, I am still using the stock Epic EL30 modem. Would this be causing the problem? And if you don't mind sharing, which rom and modem are you using? What happens when you dial *#*#DEBUG#*#* at the dialer?
Thanks
b

Bill720 said:
As for the modem, I am still using the stock Epic EL30 modem. Would this be causing the problem? And if you don't mind sharing, which rom and modem are you using? What happens when you dial *#*#DEBUG#*#* at the dialer?
Click to expand...
Click to collapse
Like I said, I'm not sure what causes the modem exception error. I'm using Effsi's 0611 build of PACman ROM with didhiy's 0606 nitest, and the NS4G LF2 modem. And when I dial that, it prompts for the MSL, I put in my MSL and it goes to the debug menu with no problem.
Sent from my SPH-D700 using Tapatalk 2