Develop Bugs

[Fix] CM 12.1 Nerflix issue (solved)

Hello every one,
since iam unable to post in the dev section (new account) i decided to post my findings in here, feel free do move this post into the dev section ...
I got the Netflix application finaly working on my Note 8.0 (gt n5100) with cyanogenmode 12.1 (Build Date 2015-10-07)
Disclamer
Iam not responsible for any damages that accur during this process, you do this on your own risk, if you havent heard about softbricking your phone you should stop right here!
The Issue:
After starting the Netflix app, now login screen appears, instead there is the red loading circle spinning in an endless loop
The Fix
Components involved:
For the fix i used the official Xposed Framework for Android Lolipop (5.0 - 5.1) - arm version 75 and XposedInstaller_3.0_alpha4.apk . http://forum.xda-developers.com/showthread.php?t=3034811
The flashable zip which supposedly fixes the netflix issue (didnt work for me, but since i flashed it iam not sure if its part of the solution) http://forum.xda-developers.com/galaxy-note-8-0/development/netflix-fix-t3200644/post62954762
The Xposed module which fixes the netflix issue for CM 10.1 Exynos devices http://forum.xda-developers.com/showthread.php?t=2101525
Furthermore you need TWRP, CWM, or any other recovery to flash the Xposed Framework and the fix
HowTo:
Backup your current rom!!! (Ive ended up several times in a bootloop after trying out different versions of the Xposed Framework, so make sure you have a BACKUP)
Install the Xposedinstaller apk (from component link #1)
Go into your recovery and flash the Xposed Framework (from component link #1) (reboot the system and see if the framework works)
Go back into your recovery and flash the flashable netflix fix (from component link #2 - as i said iam not sure if this is part of the solution, feel free to skip this step and try out if it works for you, iam too lazy to flash back atm )
Install the Xposed module apk (from component link #3) and activate the installed apk in the Xposed Framework application.
Reboot your device and start the Netflix application, which should now load propperly and you should be able to login
Enjoy watching Netflix on your phablet again
Since iam not sure if the flashable fix (component #2) was necessary i cant say if this works for all exynos4 devices, but feel free to try it out and post you findings
Best Regards
Lord Uranus

Phone booting into safe mode after flashing Xposed

Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!

silasnicholls said:
Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!
Click to expand...
Click to collapse
Have not tred on Temasek's ROM but I am using CM12.1 with Xposed. Ummm might I ask what Xposed did you Flash? Try flashing the latest version and see. Also wipe your dalvik cache and cache. That worked for me

Make sure it is Xposed v79 sdk 22 ARM64

Fixed it! Turns out I was using the 2.7 apk not 3.0 alpha!

[MOD][FIX] Grorkmod (STABLE|SYSTEMLESS|LOS-Version)

Hello.
After many many tinkering and a small hint from @rovo89, finally i can present you the first stable version of the grorkmod.
Added v1.7 LineageOS-Version
Fix for bluetooth
Updated Audio_policy.conf will be copied. Result is a working audio.
Click to expand...
Click to collapse
Added v1.0 LineageOS-Version
Until the fix is integrated in the Rom, you can use the LOS-Version for a working fm-radio.
The Fix will add the following rights to selinux:
system_app fm_device:chr_file {write, read, open, ioctl}
This is a quick'n'dirty way.
Click to expand...
Click to collapse
Added v1.1 lite
In this version the fix is the same, but the script dont need an installed superuser. Also it will leave the system untouched.
Ive tested this version with Eragon v4.0 (With Gravitybox as testmodule, guess what... its working. Ive NOT tested if magisks will work properly with banking apps. please do it for me.
Click to expand...
Click to collapse
Review betaversions
In the past versions i have tried to workaround the problem.
At projectstart i have seen many audit denies. I tried to eliminate them with injecting allows to the sepolicy.
This was a part of the little success i had with the first versions. The other part was to set the classes internally to permissive.
These two components and the "bootprocesshack", in which i changed the sepolicy-binary in root, made the beta versions working.
The problem in the beta version was always, that in some cases the workaround didn't worked.
Click to expand...
Click to collapse
Stable
After an hint that @rovo89 gave me, i saw the problem in seconds, and.... *FACEPALM*
I've saw the problem and didn't saw it anyway.....
For a reason i don't know (maybe it's just a fault from Elephone or mediathek?) they "forget" to setup the contexts files not correctly.
With this mod i fix the entries in the seapp_contexts and file_contexts.
This is the whole magic.
Click to expand...
Click to collapse
Installation
Wipe Dalvik/Cache
Install ROM
Install SuperSU
Install grorkmod
Install xposed
then boot to system
Click to expand...
Click to collapse
Have fun with a fully working ROM!
greetings
vsrookie
CREDIT / INSPIRATION
@Chainfire - for his overwhelming work. @rovo89 - for making apps bend like metal
@skeleton1911 - for making his rom and his work
@Mikos - for his setools for android
@Deepflex - for all the work done to our device
Click to expand...
Click to collapse
Download mod LOS-Version v1.7
Download mod v1.1 lite
Download mod v1.0
Alternative Download
alternative Download mod v1.0
older Versions:
Download mod LOS-Version v1.5
Download mod LOS-Version v1.0
Download mod v0.94
Mirror v0.94
Download mod v0.8
Download mod v0.7
Download mod v0.6
Download mod v0.5
old Projectdescription:
About
This is a solution to get the xposed framework running in enforcing mode AND keep it running after a reboot, dalvik cache wipe and installation of any app.
The main goal is for sure the working xposed framework in enforcing mode, but as we all noticed there are several issues that come with a script that only set the selinuxmode to permissive. That's the second part of this project, trying to not change the behaviour of apps like on stockrom.
Click to expand...
Click to collapse
Background
As i get the p9000 and installed eragon the first time, i installed the xposed framework as fast as i can and.... everything works? Installed modules and... nothing worked!? I tried some things to get it working, but with everything i tried, i had to take a smear.
Pretty annoying, isn't it?
I took a deeper look into selinux and tinkered.... and tinkered ... and tinkered!
Now i think it's time to share my stuff with this great community and i hope that i will help with my mod.
Click to expand...
Click to collapse
BEWARE/Disclaimer
If you don't know what selinux is, then i think you have to read a "little bit" about it. (pure linux stuff; non Android)
If you google it, then you find everything you need, to learn more about it. If you don't know what rooting is, then play Angrybirds instead.
Understand this:
SELinux is a abbreviation for Security Enhanced Linux. That isn't just a name, it's the programm.
With this mod you will loose the S in the name.
Please be sure you have made a backup from everything that's important for you.
I've done this mod in all conscience, but I'm not responsable for bricked devices. Realize it!
You have been warned! :good:
Click to expand...
Click to collapse
The idea behind
This mod installs setools binaries to /su/bin, so you use them on terminal with this mod. We need them to inject permissions to the sepolicy binary. The next problem is, that the original sepolicy is compiled into the kernel (rootfs). Thats why it will be overwritten on boot. If you inject permissions manually, they are gone with every reboot. So i wrote a script that injects permissions on boot to a patched (with superkernel) sepolicy binary and copy it to root.
Click to expand...
Click to collapse
Installing
Now the funny part! :highfive:
What you need
I tested this mod on Eragon v2.8 and Aerom V3.
So you need one of these Roms (i think it will also work on rooted stockrom and Darksense, cause the two three other based on stockrom)
superSu 2.74
xposed framework v85
and of course my mod (see the attachement).
How to
Download everything to your SDCard.
Make sure you have wiped your device, so you can start fresh. (I don't have tried, only to flash this mod.)
Dont reboot. If you reboot, then reboot into recovery again!
Install the rom of your choice. (If you install Eragon v2.8, then be sure to delete the script inside /system/etc/init.d)
Install SuperSu 2.74
Install XposedFramework v85
Install Grorkmod
After this step just reboot. And check if everything is fine.
If not then let me know!
Click to expand...
Click to collapse
XDA:DevDB Information
Grorkmod, Tool/Utility for the Elephone P9000
Contributors
vsrookie
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-09-17
Current Beta Version: 0.94
Beta Release Date: 2016-06-09
Created 2016-06-09
Last Updated 2017-02-17

Reserved
LineageOS-Versions
v1.7
- FIX for not working audio over Bluetooth.
LineageOS-Versions
v1.0
- FIX for not working FM-Radio
Stockrom-Versions
v1.1 (lite version; systemless)
- reworked the script, so it will run systemless
- init.d support don't implemented in this version
- old grorkmods wil NOT be removed. So you have to install this one from scratch.
v1.0 (STABLE RELEASE!)
- live patching seapp_contexts and file_contexts
- live patching sepolicy binary at flashing time, add some allows were missing
- add init.d support as supposed to be
- disabling old grorkmod versions at flashin time.
v0.94
- live patching sepolicy binary at flashing time.
- works on all stockbased Roms
- Add init.d support, if it is not implemented already (For Stockrom; busybox EXCLUDED; it has to be installed afterwards to /system/xbin).
Minor changes are:
- cleared out Installer
Current issues:
- sometimes it's lost on reboot. Workaround: just reboot another time, or shutdown phone and reboot again.
v0.8
tidied up scripts
changed hook for injecting sepolicy
v0.7
simplified script
fixed an issue if phone shutdown
v0.6
fixed logcat support in scripts.
v0.5
Beta release

What exactly does your mod do then?
Sent from my P9000 using Tapatalk

mrbubba999 said:
What exactly does your mod do then?
Sent from my P9000 using Tapatalk
Click to expand...
Click to collapse
Hi.
Thank you. Didn't noticed!
I've added "the idea behind" to the first post.
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app

do you need the xposed app?

Hi.
What do you mean?
You have to install it for installing xposed modules. Just install it after boot.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app

ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.

mangoman said:
ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.
Click to expand...
Click to collapse
Hi.
Never tried to softreboot the phone. I will try and report back as fast as i can.
Did you made a clean install? Or dirty flashed the mod?
greetings
vsrookie

clean AeromV3 install. normal reboots do not work
Good I have 3 sim cards on same number the way I mess with my phones.

Hi.
Tried to softreboot the phone from xposed installer. That don't work, that's sure.
On Eragon normal reboots work. I will test with Aerom soon.
greeting
vsrookie
Sent from my P9000 using XDA-Developers mobile app

ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.

mangoman said:
ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.
Click to expand...
Click to collapse
Is your edit 2 referring to eragon 2.8?

yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.

mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?

mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
That s not true.... sorry.
I am on aeromv3 right now rebooted around 5 times (normal, not over xposedinstaller).
Everything works as expected. Even with amplify.
Do you use backuped Apps?
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app

arlrb said:
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?
Click to expand...
Click to collapse
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app

yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.

vsrookie said:
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?

mangoman said:
yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.
Click to expand...
Click to collapse
Hi.
Can you give the new version 0.7 a shot?
I had issues if the phone shut down completely. At this point i had also no running xposed anymore.
Fixed this.
Now i can reboot also out of xposed installer.
Greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app

arlrb said:
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?
Click to expand...
Click to collapse
Hi.
This order:
wipe
install rom
install supersu
install xposed franework
install mod
boot
install xposed installer
install modules
activate them
restart phone
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app

xposed now working on tab s3

A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.

Which are you using, and what would you like to use?

undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working

Can you change aspect ratio yet?

blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?

It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed

does not work for me.. i get a recovery-boot loop and it does not start the system

Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.

hmm.. but i need magisk :-/

Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?

rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd

I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?

xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..

Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.

Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y

Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.

rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam

Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.

rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam

[ROM][UNOFFICIAL] Lineage 15.1 Manta [NEXUS10][01OCT2019][MONTHLY]

Again, credits to the great @followmsi
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Known issues:
- Camera is not working (broken HAL1 camera and unsupported HAL2 camera)
- Headphone jack is not fully working
Instructions:
1. Flash ROM
2. Flash Gapps (I use opengapps PICO)
3. Reboot to OS
4. Profit?
5. Reboot to Recovery to install Magisk (Optional)
Download Link:
https://drive.google.com/open?id=1BL...oJRV5Vms_MZF3N
Sources:
https://github.com/KiDwayne/android_kernel_samsung_manta
https://github.com/LineageOS
Credits to:
LineageOS Team
@followmsi

Initial release:
Direct Link https://drive.google.com/open?id=1WMwEpiBSzJX8X56rEg6NUz6IhXD-kh_v
May Patch
Others are sticking to LOS
Whatever doesnt work in Nougat doesn't work in Oreo

Opening post download link doesn't work. You copy pasted the text with the .... instead of using the link
Just downloading now to install over older 15.1 build.

Thanks for taking over. Everything is working fine.

flashed on my manta to use it as a daily driver as an home automation display, seems to work pretty good, subscribing for new updates.

Thanks!

Thanks a bunch, may build runs smooth.
Gonna test this one, too.

Are there any users who installed both the 14.1 and 15 versions? How do they compare?

Is there a kink for the opengapps PICO?

The download link is not working anymore.

Markster93 said:
The download link is not working anymore.
Click to expand...
Click to collapse
Check 2nd post , link working
Sent from my Nexus 10 using Tapatalk

New Build up! Terribly sorry for the holdup.
Direct Link: https://drive.google.com/open?id=1b9B6wr4NTlP5ItCLrEbzgivw8CXTNB_f
Changelog:
-June Security Patch
-LOS side updates and optimization

Hi, Downloaded the latest ROM and it flashed fine. I then factory reset the tablet, as I'm planning to give it to my father. Unfortunately, the setup wizard keeps stopping Is there any possibility this can be fixed? It would be much appreciated!

fhyfds said:
Hi, Downloaded the latest ROM and it flashed fine. I then factory reset the tablet, as I'm planning to give it to my father. Unfortunately, the setup wizard keeps stopping Is there any possibility this can be fixed? It would be much appreciated!
Click to expand...
Click to collapse
I dirty flashed fine. Might be something at the back.
For now I am working with the LOS14.1 issues, worst case scenario, try this, clean flash previous build, setup and then dirty update. Tell me if it works! So sorry for the inconveniences.

Thanks, that worked great! Thank you for your work!

Works fine so far. But there's a folder "!ReadyToFlash\Root_Files" which includes amongst others "busybox_signed.zip" and "SR2-SuperSU-2.79....zip".
I've flashed them both successfully in TWRP but after reboot I can't see Busybox nor SuperSU and the Device is still unrooted (developer options offers root access as "only ADB" only).
Tried to root the Device again. This Time with Nexus Root Toolkit, which installs it's own SuperSU. But no effect again.
After this I found the official LineageOS 15.1 addonsu-15.1-arm-signed.zip and flashed it as well. Again to no avail.
Bootloader Mode says "Lock State: Unlocked". So what's wrong here?
And as I've now flashed so far three different versions of SuperSU and BusyBox (which I can't find anywhere although a root checker says it's installed), do I have to uninstall these files to prevent further problems caused by orphan files from these Installations?

cobalt100b said:
Works fine so far. But there's a folder "!ReadyToFlash\Root_Files" which includes amongst others "busybox_signed.zip" and "SR2-SuperSU-2.79....zip".
Click to expand...
Click to collapse
Maybe these are left-overs from a previous ROM? Better delete them and use Magisk which is known to work with this ROM.

New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch

New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch

KiD3991 said:
New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch
Click to expand...
Click to collapse
Thanks for your ongoing great support! Just downloaded and flashed successfully.