Develop Bugs

[Q] Sprint-Samsung Galaxy SIII SPH-L710 -- S3 Unified Root (WiFi will not turn on)

I have a Sprint SPH-L710 Samsung Galaxy S3 that I rooted with "SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0 Drivers, Backup, Root, Recovery + MORE". Everything went smooth, achieved root, Bluetooth works, but WiFi toggle won't even turn on or connect to internet. There's a FAQ on his thread about the "Bluetooth + WiFi" not working, but I don't have any custom ROM's flashed, at least that I'm aware of. I'm new to rooting. If anybody could help me figure this out, it would be greatly appreciated. If I posted in the wrong place, I apologize. Thanks
Model Number: SPH-L710
Android Version: 4.1.2
Build Number: JZO54K.L710VPBMB1

Usually, broken WiFi/Bluetooth is kernel related. If you slide the screen to the side (landscape), does it flip the page you're on upside down? It's possible that the Rootkit installed another carrier's kernel, such as T-Mobile's, or AT&T's. Even so, flash a recovery (download Goo Manager from the playstore, give it ROOT access, and hit menu > install OpenRecoveryscript and let it install TWRP for SPH-L710 model. Latest should be v2.4.3.0.) Then boot into recovery and install the kernel from the link below.
http://goo.im/devs/freeza/d2sprStockKernels/StockMB1KernelOptimized.zip
See if that fixes your WiFi. This is a slightly modified stock kernel provided by Freeza.

I appreciate your help! I flashed AOSPA 3.10: Hybrid Mode, and my WiFi is working. Should I still follow your instructions or leave it be?

EndIsNearest said:
I appreciate your help! I flashed AOSPA 3.10: Hybrid Mode, and my WiFi is working. Should I still follow your instructions or leave it be?
Click to expand...
Click to collapse
My instructions would be necessary if you were on a Touchwiz-based ROM, but you've went to AOSP which uses a different kernel so you do not need to follow my instructions anymore. Happy flashing!
~OS

Overstew said:
My instructions would be necessary if you were on a Touchwiz-based ROM, but you've went to AOSP which uses a different kernel so you do not need to follow my instructions anymore. Happy flashing!
~OS
Click to expand...
Click to collapse
I have the same problem WIFI won't turn on but I can't download nothing from play store cuz don't have internet access

SarasotaKing said:
I have the same problem WIFI won't turn on but I can't download nothing from play store cuz don't have internet access
Click to expand...
Click to collapse
Download on your computer and transfer to your phone.
Sent from my S3 on Sense 5 (you jelly?)

CNexus said:
Download on your computer and transfer to your phone.
Sent from my S3 on Sense 5 (you jelly?)
Click to expand...
Click to collapse
I don't know how download an app from Google store on my pc they go stray to the phone !

SarasotaKing said:
I don't know how download an app from Google store on my pc they go stray to the phone !
Click to expand...
Click to collapse
Download a kernel on your computer and then transfer it to your phone through USB and flash. I'm not saying to download an app.
Sent from my S3 on Sense 5 (you jelly?)

CNexus said:
Download a kernel on your computer and then transfer it to your phone through USB and flash. I'm not saying to download an app.
Sent from my S3 on Sense 5 (you jelly?)
Click to expand...
Click to collapse
Everything when ok until I hit Install OpenRecoverySccript, after that it GooManager give me a message saying that : No recovery were found for you device , I'm still stuck without WIFI !

SarasotaKing said:
Everything when ok until I hit Install OpenRecoverySccript, after that it GooManager give me a message saying that : No recovery were found for you device , I'm still stuck without WIFI !
Click to expand...
Click to collapse
Using GooManager install twrp recovery, then go find a Sprint kernel for the S3 and flash the kernel
Sent from the future via Tapatalk 4

edfunkycold said:
Using GooManager install twrp recovery, then go find a Sprint kernel for the S3 and flash the kernel
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Just work great !! now I have WIFI !.
There is any root kit for HTC Inspire 4g that I can use ?

Wrong section.
Sent from my buttered S3

CNexus said:
Wrong section.
Sent from my buttered S3
Click to expand...
Click to collapse
???
Sent from the future via Tapatalk 4
---------- Post added at 03:50 PM ---------- Previous post was at 03:31 PM ----------
SarasotaKing said:
Just work great !! now I have WIFI !
Click to expand...
Click to collapse
Glad you got it working....
Sent from the future via Tapatalk 4

edfunkycold said:
???
Sent from the future via Tapatalk 4
---------- Post added at 03:50 PM ---------- Previous post was at 03:31 PM ----------
Glad you got it working....
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Can you address me to the right section ?

edfunkycold said:
???
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
SarasotaKing said:
There is any root kit for HTC Inspire 4g that I can use ?
Click to expand...
Click to collapse
Sent from my buttered S3

SarasotaKing said:
Can you address me to the right section ?
Click to expand...
Click to collapse
Can you recommend me any root kit for HTC Inspire 4g ?

SarasotaKing said:
Can you recommend me any root kit for HTC Inspire 4g ?
Click to expand...
Click to collapse
Go to the HTC forums, I have never owned an HTC device so I wouldn't know where to even send you.
Sent from the future via Tapatalk 4

SarasotaKing said:
Can you recommend me any root kit for HTC Inspire 4g ?
Click to expand...
Click to collapse
Sent from my buttered S3

Files from Root de la Vega [KNOX 0x0 Root | SM-N900T]

Does anyone have the files from the "Root de la Vega [KNOX 0x0 Root | SM-N900T] " thread in the dev section? the links just point to http://#

webstas said:
Does anyone have the files from the "Root de la Vega [KNOX 0x0 Root | SM-N900T] " thread in the dev section? the links just point to http://#
Click to expand...
Click to collapse
try this -- not tmo specific, but universal.
http://forum.xda-developers.com/showthread.php?t=2498850

nickles96 said:
try this -- not tmo specific, but universal.
http://forum.xda-developers.com/showthread.php?t=2498850
Click to expand...
Click to collapse
I tried creating my own using that thread but i can find the CSC and AP separated, on Sammobile it only lists 1 file for our phones and its a PDA(all in one)

nickles96 said:
try this -- not tmo specific, but universal.
http://forum.xda-developers.com/showthread.php?t=2498850
Click to expand...
Click to collapse
The instructions:
How to find your AP / CSC versions:
Dial *#1234#
Does not work on the sm-900T handset.

webstas said:
Does anyone have the files from the "Root de la Vega [KNOX 0x0 Root | SM-N900T] " thread in the dev section? the links just point to http://#
Click to expand...
Click to collapse
Try to use kingo root method, its easy and fast, plus doesn't trip your Knox warranty. Just Google kingo root application on your PC and then follow the instructions, is that easy.
Sent from my SM-N900T using XDA Premium 4 mobile app

parusia said:
Try to use kingo root method, its easy and fast, plus doesn't trip your Knox warranty. Just Google kingo root application on your PC and then follow the instructions, is that easy.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you get to try Kingo? i really really dont want to trip knox

webstas said:
Did you get to try Kingo? i really really dont want to trip knox
Click to expand...
Click to collapse
if some one could pm me the files that would be great.

parusia said:
Try to use kingo root method, its easy and fast, plus doesn't trip your Knox warranty. Just Google kingo root application on your PC and then follow the instructions, is that easy.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
look into Kingo and Vroot before you use it or recommend it. Its been know to have malware and even sends your phone's IMEI number to a server in China... ask yourself why would they need to do that. I've also heard from a video on YouTube that Kingo installed a camera.apk once you root... again, ask yourself why... spying?
Notice that all threads on XDA related to Kingo have been closed until further notice
Source:
http://androidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/

Here you go
Root_de_la_Vega
--------- Root_de_la_Vega Box Mirror
N900TTMBBMI7_CSC.tar
--------- N900TTMBBMI7_CSC.tar Box Mirror
N900TUVUBMI7_VEGA.tar
--------- N900TUVUBMI7_VEGA.tar Mediafire Mirror
My MD5 Checksums
Root_de_la_Vega
0E7AE4CF1C52D8151E910B553317B2FA
N900TTMBBMI7_CSC.tar
C968D2A1D2DC14D3853903EF13529EBB
N900TUVUBMI7_VEGA.tar
E3AED758C41ABFB6A01412D2E18F8F9F

rlee008 said:
look into Kingo and Vroot before you use it or recommend it. Its been know to have malware and even sends your phone's IMEI number to a server in China... ask yourself why would they need to do that. I've also heard from a video on YouTube that Kingo installed a camera.apk once you root... again, ask yourself why... spying?
Notice that all threads on XDA related to Kingo have been closed until further notice
Source:
http://androidfannetwork.com/2013/11/08/psa-kingo-root-and-vroot-malicious/
Click to expand...
Click to collapse
I recommended because I use that one after use root de la Vega to root my device the first time, after root de la Vega my screenshot with spen doesn't work any more and the palm motion screenshot wasn't working either. I went back to stock ROM via Odin, and then re root with kingo root, I never seen any Camera application installed after root, and I don't know anything about IMEI sent to China, but sometimes this stories are like bigfoot, Aliens, The Moth man, etc. You just need one person to start a rumor about the IMEI sent to china, and then a paranoia start to spread around. Thank you for your concern, and I read those threads before I rooted with Kingo and I'm a happy camper at least until Tweaked come out of the Alpha and beta station then I will brake the Knox flag, and flash Tweaked in a heart bit.
Sent from my AT100 using XDA Premium 4 mobile app

transitoyspace said:
Here you go
Root_de_la_Vega
--------- Root_de_la_Vega Box Mirror
N900TTMBBMI7_CSC.tar
--------- N900TTMBBMI7_CSC.tar Box Mirror
N900TUVUBMI7_VEGA.tar
My MD5 Checksums
Root_de_la_Vega
0E7AE4CF1C52D8151E910B553317B2FA
N900TTMBBMI7_CSC.tar
C968D2A1D2DC14D3853903EF13529EBB
N900TUVUBMI7_VEGA.tar
E3AED758C41ABFB6A01412D2E18F8F9F
Click to expand...
Click to collapse
hey thank for the links! but is there any way you can skip that whole Mega thing? its really annoying when i cant even successfully open an account to download the last file. the other two were fine from box but Mega is sucking

rlee008 said:
hey thank for the links! but is there any way you can skip that whole Mega thing? its really annoying when i cant even successfully open an account to download the last file. the other two were fine from box but Mega is sucking
Click to expand...
Click to collapse
Ya, Mega on FF fails alot. Mega on Chrome worked fine and faster.
I uploaded the smaller files to my box account. I can try uploading the 1.8gb file to my box but I can only host it for a couple of days since I need the space. Ill update my post once its done.
Update: Box wouldnt let me upload. Mediafire was the only mirror I could do. My og post is updated

transitoyspace said:
Ya, Mega on FF fails alot. Mega on Chrome worked fine and faster.
I uploaded the smaller files to my box account. I can try uploading the 1.8gb file to my box but I can only host it for a couple of days since I need the space. Ill update my post once its done.
Update: Box wouldnt let me upload. Mediafire was the only mirror I could do. My og post is updated
Click to expand...
Click to collapse
Thank you so much for loading these files. I searched long and hard for these. The original threads don't have the links any more.
Thanks about the tip about crome and Mega. It worked fine in crome.
Thanks thanks thanks again
Sent from my Note 3 (N900T) using XDA Premium

How do we use this files?
Sent from my Nexus 10 using Tapatalk 4

nightfox11 said:
How do we use this files?
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
See the video. It was very well done.
I rooted over the weekend.
http://forum.xda-developers.com/showthread.php?t=2487916
Sent from my rooted Note 3 (N900T) using XDA Premium

smaisonville said:
See the video. It was very well done.
I rooted over the weekend.
http://forum.xda-developers.com/showthread.php?t=2487916
Sent from my rooted Note 3 (N900T) using XDA Premium
Click to expand...
Click to collapse
does anyone know why he took the links down? Every link is dead besides the ones in this thread.

And another question: Anyone know of an update to MI7? Most other models have FW updates, but the N900T is stuck on MI7.

[Kernel] Dealer's Choice [StarKissed] [AT&T]

This kernel has moved to http://forum.xda-developers.com/note-4/unified-development
Support and discussion specific to AT&T can be found at:
http://forum.xda-developers.com/showthread.php?t=2931217

View the complete list of warnings, interfaces, and "namebrand" features
Additional information for AT&T version:
Potentially Unavailable:
Potentially Unsafe:
Incomplete / Inactive:

Figured I would get this set up since all it needs is a stock boot.img to start publishing builds

twistedumbrella said:
Figured I would get this set up since all it needs is a stock boot.img to start publishing builds
Click to expand...
Click to collapse
I'm not very knowledgeable on kernels, but don't we need root for this?

pr0cl1v1ty said:
I'm not very knowledgeable on kernels, but don't we need root for this?
Click to expand...
Click to collapse
Correct. But it is also possible to inject a kernel if a bootloader unlock isn't available.

You can download the stock boot.img from here:
https://drive.google.com/file/d/0B84GmjBmdnKpUjhWdi1tbC1GdDg/view?usp=sharing

twistedumbrella said:
Correct. But it is also possible to inject a kernel if a bootloader unlock isn't available.
Click to expand...
Click to collapse
So, help me out here... I am doing research on the kernel... basically it is like a pre-rooted thing? Wouldn't think trip knox? Thanks.

pr0cl1v1ty said:
So, help me out here... I am doing research on the kernel... basically it is like a pre-rooted thing? Wouldn't think trip knox? Thanks.
Click to expand...
Click to collapse
Rooting trips knox. By the time you get here you've already made your peace with that

Modified builds are uploading now. The stockish backups will be compiled later tonight.
Sent from my iPad using Tapatalk

I notice the builds are up. Just one question... How to flash this?

Monsi said:
I notice the builds are up. Just one question... How to flash this?
Click to expand...
Click to collapse
Read the part after the download link

You are the best! Just download starkissed....?

Anybody flash this yet? Never flashed a kernel before having root, so I'm a little outta my element here

brittoking said:
Anybody flash this yet? Never flashed a kernel before having root, so I'm a little outta my element here
Click to expand...
Click to collapse
You need to be rooted.
Sent from my iPad using Tapatalk

twistedumbrella said:
You need to be rooted.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thank you for the quick reply. Haha I figured as much but they way the post is set up, it seemed like you could use heimdall to flash it. Knew it was too good to be true yet! Awesome work getting it set up already though

The fact that there's something posted in the development section for this phone gives me some hope that we'll achieve root soon.

silentecho13 said:
The fact that there's something posted in the development section for this phone gives me some hope that we'll achieve root soon.
Click to expand...
Click to collapse
Just to prevent any false hope, the configuration for the kernel was included with the T-Mobile version of the source so that is what made porting it so quickly possible. Root may not be as easy. I do hope it is, though.
Sent from my iPad using Tapatalk

So is this flashable on the At&t Note 4?

tampaboy1984 said:
So is this flashable on the At&t Note 4?
Click to expand...
Click to collapse
With the prerequisites (rooted, working Heimdall / copy of flashify), yes

There is a root method for the At&t Note 4 now?

[5.1.1/OF7/OFE] Mostly Stock Kernel - with root! (7/14/15)

Here it is! Root for 5.1.1 thanks to @djvoleur! I helped a little but he did most of the work. Thanks also goes to @g.lewarne for his work on Unikernel as a couple of their ramdisk commits were needed to get this going.
This will trip KNOX. It will. Trip. KNOX. IF YOU HAVE NOT TRIPPED KNOX YET - THIS WILL TRIP IT. ALSO - you CANNOT downgrade after you take the OTA so be sure you want it.
I hope that's clear enough?
Instructions:
After you've booted into OF7 or OFE, go to Settings > About device and tap Build number 7 times to enable Developer Mode.
Go back and select Developer options and turn on OEM unlocking
Reboot in to download mode (Power + Home + Volume Down)
Use ODIN to flash boot-of7root.tar
After your phone boots you will now have root! You may also be back on stock recovery, which is fine since we don't have a working one for 5.1.1 just yet
You'll notice constant messages about security issues because of KNOX and the kernel being permissive. To get rid of these, open Titanium Backup (or your personal favorite app freezing app) and freeze SecurityLogAgent.
Download
OF7: https://www.androidfilehost.com/?fid=24052804347768984
OFE: http://1drv.ms/1LeDH1z
If you have any questions, post in this thread and @djvoleur and I will be watching. And if you'd like to send any trucks full of money, I'm sure we can arrange that via PM.
ENJOY!

@g.lewarne is the unikernel dev. Glad you guys figured it out, he's been camping and not really able to download anything so grabbing your kernel source was pretty tough.

mikeyinid said:
@g.lewarne is the unikernel dev. Glad you guys figured it out, he's been camping and not really able to download anything so grabbing your kernel source was pretty tough.
Click to expand...
Click to collapse
I believe it turned out to be a PEBKAC error there at the end Thanks for the offers to help though! Definitely appreciated here in the land of misfit S6s.

Working beautifully here, thanks.

Is there a recovery for 5.1.1 yet?
Sent from my SM-G920P using XDA Free mobile app

So this is root for the 5.1.1 update?
How can I update to 5.1.1, if I'm currently rooted on 5.0.2?
Thanks!

evo3d6 said:
Is there a recovery for 5.1.1 yet?
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
There's a test version of TWRP here that appears to be working, nothing official yet (nothing to flash either anyways).
---------- Post added at 12:10 PM ---------- Previous post was at 12:08 PM ----------
GoreTan said:
So this is root for the 5.1.1 update?
How can I update to 5.1.1, if I'm currently rooted on 5.0.2?
Thanks!
Click to expand...
Click to collapse
Yes, this is root for the OF7 update. Best way to update right now since we still don't have a stock tarball for OF7 yet is flash back to stock OE2, update, and flash this kernel for root.

prototype7 said:
There's a test version of TWRP here that appears to be working, nothing official yet (nothing to flash either anyways).
---------- Post added at 12:10 PM ---------- Previous post was at 12:08 PM ----------
Yes, this is root for the OF7 update. Best way to update right now since we still don't have a stock tarball for OF7 yet is flash back to stock OE2, update, and flash this kernel for root.
Click to expand...
Click to collapse
Thank you for the quick reply!
Where can I find the stock OE2 update, if you don't mind me asking?

GoreTan said:
Thank you for the quick reply!
Where can I find the stock OE2 update, if you don't mind me asking?
Click to expand...
Click to collapse
Edit: I found a good mirror here: https://www.androidfilehost.com/?fid=24052804347757424

thanks for this!! before I try this, I took the 5.1.1 update, this applies to my Sprint device correct?
sent from my S6 using tapatalk

scott_0 said:
thanks for this!! before I try this, I took the 5.1.1 update, this applies to my Sprint device correct?
sent from my S6 using tapatalk
Click to expand...
Click to collapse
Yes, this is for the Sprint GS6 (G920P).

Does the device go into deep sleep after root with this method? Or is the deep sleep fix needed after this? Thanks!

JoeFCaputo113 said:
Does the device go into deep sleep after root with this method? Or is the deep sleep fix needed after this? Thanks!
Click to expand...
Click to collapse
Deep sleep fix is already applied...
Sent from my SM-G920P using Tapatalk

prototype7 said:
Edit: I found a good mirror here: https://www.androidfilehost.com/?fid=24052804347757424
Click to expand...
Click to collapse
Thank you again!
One last thing, how do I flash this?
Use Odin I presume?

GoreTan said:
Thank you again!
One last thing, how do I flash this?
Use Odin I presume?
Click to expand...
Click to collapse
Yep, put phone in download mode, open Odin, click AP and select your file, plug phone in and hit Start.
Sent from my SM-G920P using Tapatalk

Is there any way to flash this onto an S6 Edge? 925P? Or would it need it's own specific kernel?

x70xchallengerx said:
Is there any way to flash this onto an S6 Edge? 925P? Or would it need it's own specific kernel?
Click to expand...
Click to collapse
Needs it's own kernel...I'm waiting for a 5.1.1 stock 925P kernel...I have the kernel compiled already...
Sent from my SM-G920P using Tapatalk

@datajosh or @djvoleur do you guys happen to have the update-binary for Sprint S6 (OF7)?!
I want it so I can easily create my own flashables using THIS TOOL. Thanks in advance

JoeFCaputo113 said:
@datajosh or @djvoleur do you guys happen to have the update-binary for Sprint S6 (OF7)?!
I want it so I can easily create my own flashables using THIS TOOL. Thanks in advance
Click to expand...
Click to collapse
you're gonna have to share once you get this rolling Joe!
sent from my S6 using tapatalk

scott_0 said:
you're gonna have to share once you get this rolling Joe!
sent from my S6 using tapatalk
Click to expand...
Click to collapse

Extreme Syndicate ROM Discussion Thread

Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)

I suggest you don't be selfish and hook your boy with the s7 edge up with a Rom 'U' version only keep it simple

2swizzle said:
I suggest you don't be selfish and hook you boy with the s7 edge up with a Rom 'U' version only keep it simple
Click to expand...
Click to collapse
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol

elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk

2swizzle said:
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
Click to expand...
Click to collapse
yea, this week imdoin OT everyday so ton of hours..

elliwigy said:
Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
Click to expand...
Click to collapse
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)

elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Where did you find his rom? How's battery?

RockyCJC said:
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
Click to expand...
Click to collapse
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1

Illogi.xbone said:
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
Where did you find his rom? How's battery?
Click to expand...
Click to collapse
1) I am going to use a rom.zip but you will still need the eng boot to have root i believe so odin 930U then root usig eng boot then flash my ROzm in FF
2) his rom is in the vzw s7e forum

Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Sent from my SM-G930V using Tapatalk

elliwigy said:
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Click to expand...
Click to collapse
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk

fronc01 said:
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Click to expand...
Click to collapse
I recommend you check out my other rom threads to see what the goal is..
essentially I shoot for an extremely debloated rom which typically does include better speed and battery life but that is more of a side effect imo

RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Click to expand...
Click to collapse
Not necessarily. some of it does work.. ideally however i like to bake things in.. the less zips to flash the better.. i wont worry too much as i dont release roms that dont work well to begin with

RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.

psouza4 said:
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
Click to expand...
Click to collapse
Gotcha.. its not my top priority to be honest but its not difficult to do so ill most likely do it

I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!

@elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR @elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!

CVertigo1 said:
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
Click to expand...
Click to collapse
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup

elliwigy said:
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
Click to expand...
Click to collapse
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.

CVertigo1 said:
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
Click to expand...
Click to collapse
if i leave setup wizards in it fcs when it trys to set up the google acct during initial setup so i cant get past the setup..
if i remove both wizards it just fcs whenever trying to add a google acct..
i didnt remove any google apks so it must be lookin for something else i removed.. i will start from scratch tom. evening or Sunday.