Develop Bugs

HELP.Bricked tab3 8 SM-T310?

Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.

spirosoupia said:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
Click to expand...
Click to collapse
1.Do you boot into the Philz recovery or the one you had previous to Odin the recovery? If its philz try wiping data and cache and rebooting.
2.Next check if the md5 of your download matches and you have downloaded the correct zip for your device (lt01wifi). If so factory data reset and then flash again.
3.Make sure you are using ODIN correctly. A good guide can be found here http://forums.androidcentral.com/ambassador-guides-tips-how-tos/300296-guide-samsung-how-flash-stock-rom-via-odin.html

I flashed the stock firmware again and still bootloop.
Then I did a factory reset via the recovery and that was it!!!! My tablet is fixed!!!
I pass the Philz recovery then and root the tablet.
So now I am with the stock ROM and rooted. Thank you!!!

Is your data lost after flashed ?
Image, mp3, video etc..

[Q] Cannot mount /data

Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me

Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R

Ripshock said:
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Click to expand...
Click to collapse
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice

brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Is your device rooted?
Brought to you by SM-T210R

Ripshock said:
Is your device rooted?
Brought to you by SM-T210R
Click to expand...
Click to collapse
yes rooted ,

brajesh0201 said:
yes rooted ,
Click to expand...
Click to collapse
Android-armeabi.universial-root.zip used this package to root

brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.

bierma32 said:
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
Click to expand...
Click to collapse
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure

brajesh0201 said:
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
Click to expand...
Click to collapse
Im using philz tuoch and i habe no prob.
At philz have check The Mount point (sdcard or sdcard/0 )
If these all not hell flash CWM.

I have no clue what i did with it, but this is on the screen:
Odin Mode
Product name: SM-T210
Current Binary: Custom
System Status: Custon
HW REV: 0x5
It has an image like: Tablet......Yellow triagle with an ! in it.....Computer.
Under that it has the text: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies can't connect to the device. I have no clue what i did all ....
Experts please help !!!

hey
in philz recovery, in wipe options select - clean to install new rom
the goto tab 3 7.0 area get svelte rom , you need to put it on removable microsd with card reader [get one]
the put card back in tab reboot to recovery and flash, firmware updates aren't always good or necessary,
odin should be a last option. stay calm [use the force] and good luck :good:

brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
here is the solution of your prob, i font it in the lt02 Thread
bierma32
Post#352 and following Posts.
http://forum.xda-developers.com/showthread.php?p=53154386
Quote:
Originally Posted by*jstath1972*
In the first attempt i made a dalvik cache, cache, system wiping. I installed the rom and made again a dalvik cache, cache wiping and reboot. Then was saying "no Root. Would you like to flash super user in to system?" and then nothing. I made re install for second time the same rom zip with the default "Factory Reset" and everything went fine. Weird ha ? I also use TWRP 2.7.0.0 .*
I hope to help.*
Its funny its only work when you factory reset, My guess would be that something wrong with twrp or updater script.*
Maybe @gr8nole*will know more bout this issue.*
Sent from my Galaxy Nexus using Tapatalk

brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
try to flash the stock ROM Android 4.1.2 ( Jellybean ) from page www.sammobile.com and flash it with odin 3.07 , after you flash with odin sees the recovery of stock and give ' Wipe Data / Factory Reset ' ' and the problem is solved ( I run my me :good: ) and sorry for my bad English that use a translator :silly:
( and the solution suddenly discovered )
I just hope it works for you you too

Please Help

I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?

sinoka56 said:
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
Click to expand...
Click to collapse
Mj5 is fine for flashing any 4.3 or 4.4.2 rom just click on my signature and look for how to wipe your phone via philz follow those steps and flash phantom rom if still gives you issue then flash latest twrp you'll find the links for it in my signature as well and steps how to wipe via twrp good luck
Sent from my GT-N7100 using Tapatalk

I installed TWRP recovery but when I factory reset / wipe data, dalvik, data, system it doesn't format the system

You can try another recovery through odin, if it fails flash stock rom through odin. Make sure you flash one which is as least as new bootloader. Then start from square one.

Witch version of TWRP do you use ?
To do full wipe I use Zoot Wipe script, but be careful it remove everything :
http://forum.xda-developers.com/showthread.php?t=2121347

Stuck in CWM / Crash on every Rom installations

Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.

nicobee75 said:
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
Click to expand...
Click to collapse
Hi
It seems you were on kitkat rom which may have updated your bootloader to kitkat version. The CWM needs to be updated to work well with kitkat. I had similar problem with my SM-T210, and solved the problem after updating CWM as per this post for T210:
http://forum.xda-developers.com/showthread.php?t=2433853
Your tab is different from mine so i think you need a fresh stock rom install using odin, then find an updated CWM for your tab.

[Tab Pro 10.1 SM-T520] Unresponsive trying to flash lineage OS

Hi all, I am new to the forum so bear with me!
I recently rooted my Tab Pro 10.1 as it was becoming unusably slow, and I wanted to lighten it a little. Root was successful, and I downloaded lineage OS from the dev forum to flash onto my device using TWRP manager. However, after trying this my device now boots to the Samsung model number page (first screen), then goes blank. If I hold down the power button it powers off, but restarts and does the exact same thing. I hope I haven't done irreparable damage, seeing as it can still seemingly start and I can also boot into download mode (not bricked).
My question basically is, is there a way to "undo" my failed flash attempt and return my device to a "normal" rooted device using odin, seeing I can access download mode?
Many thanks in advance!
Craig

Use twrp 3.0.0.0 afterwards flashing the rom,flash gapps
If u wanna go back to stock,just flash the stock ROM (download from sammobile) via odin
von meinem SM-T520 mit Tapatalk

ChilliBo said:
Use twrp 3.0.0.0 afterwards flashing the rom,flash gapps
If u wanna go back to stock,just flash the stock ROM (download from sammobile) via odin
Click to expand...
Click to collapse
Thanks for your response.
The problem is I can't boot the device past the model startup screen to begin using TWRP and flashing, as the screen black and unresponsive (I can get into download mode). Do you suspect if I flash the stock ROM using Odin I will get back to where I started?

If you wanna go for lineage os, go to download mode and flash twrp 3.0.0.0 with odin, reboot to recovery and wipe system, cache,dalvik. Now flash ROM and gapps.
Back to stock? Just flash stock ROM via odin after first boot go to recovery and do a factory reset
Gesendet von meinem SM-T520 mit Tapatalk

hello
press vol+ pwr home buttons together u are in dowload mode
use autoroot with odin (all necessary files are there)
3.xxxx does't work correctly with t520
regards

Thanks all for your help - I have eventually got sorted in the end.
I was able to flash TWRP 3.0.0.0 onto my device with Odin, then booted into recovery mode (PWR + Vol up), wipe everything (except internal memory) and flash the most up to date lineage file I had downloaded prior to the process. Device working well now, just downloaded and flashed the relevant GAPPs and all in working order.