Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Ripshock said:
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Click to expand...
Click to collapse
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Is your device rooted?
Brought to you by SM-T210R
Ripshock said:
Is your device rooted?
Brought to you by SM-T210R
Click to expand...
Click to collapse
yes rooted ,
brajesh0201 said:
yes rooted ,
Click to expand...
Click to collapse
Android-armeabi.universial-root.zip used this package to root
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
bierma32 said:
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
Click to expand...
Click to collapse
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
brajesh0201 said:
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
Click to expand...
Click to collapse
Im using philz tuoch and i habe no prob.
At philz have check The Mount point (sdcard or sdcard/0 )
If these all not hell flash CWM.
I have no clue what i did with it, but this is on the screen:
Odin Mode
Product name: SM-T210
Current Binary: Custom
System Status: Custon
HW REV: 0x5
It has an image like: Tablet......Yellow triagle with an ! in it.....Computer.
Under that it has the text: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies can't connect to the device. I have no clue what i did all ....
Experts please help !!!
hey
in philz recovery, in wipe options select - clean to install new rom
the goto tab 3 7.0 area get svelte rom , you need to put it on removable microsd with card reader [get one]
the put card back in tab reboot to recovery and flash, firmware updates aren't always good or necessary,
odin should be a last option. stay calm [use the force] and good luck :good:
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
here is the solution of your prob, i font it in the lt02 Thread
bierma32
Post#352 and following Posts.
http://forum.xda-developers.com/showthread.php?p=53154386
Quote:
Originally Posted by*jstath1972*
In the first attempt i made a dalvik cache, cache, system wiping. I installed the rom and made again a dalvik cache, cache wiping and reboot. Then was saying "no Root. Would you like to flash super user in to system?" and then nothing. I made re install for second time the same rom zip with the default "Factory Reset" and everything went fine. Weird ha ? I also use TWRP 2.7.0.0 .*
I hope to help.*
Its funny its only work when you factory reset, My guess would be that something wrong with twrp or updater script.*
Maybe @gr8nole*will know more bout this issue.*
Sent from my Galaxy Nexus using Tapatalk
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
try to flash the stock ROM Android 4.1.2 ( Jellybean ) from page www.sammobile.com and flash it with odin 3.07 , after you flash with odin sees the recovery of stock and give ' Wipe Data / Factory Reset ' ' and the problem is solved ( I run my me :good: ) and sorry for my bad English that use a translator :silly:
( and the solution suddenly discovered )
I just hope it works for you you too
Related
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
When you change your rom you need to wipe data from recovery.
FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
[email protected]
i installed cwm recovery 6.0.3.0 and i also installed cm-9
but it show while booting only th LG Logo. whats wrong with the phone?
any ideas to get a rom working?
and usb mount in recovery is also not working.
is there a possability to get everything working again?
Can you please mention the link of the rom which flashed...
PS.Before installing the rom did you format/wipe " /system "
Same problem here
theprakhar said:
Can you please mention the link of the rom which flashed...
PS.Before installing the rom did you format/wipe " /system "
Click to expand...
Click to collapse
I flashed this ROM MiniCM10-4.0.2-20121207-UNOFFICIAL-ALPHA2-p350
and yes i wiped sytem cache
I followed the instruction from this website
ninjaromeo.com
update-lg-optimus-me-p350-jelly-bean-cm10
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
sinoka56 said:
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
Click to expand...
Click to collapse
Mj5 is fine for flashing any 4.3 or 4.4.2 rom just click on my signature and look for how to wipe your phone via philz follow those steps and flash phantom rom if still gives you issue then flash latest twrp you'll find the links for it in my signature as well and steps how to wipe via twrp good luck
Sent from my GT-N7100 using Tapatalk
I installed TWRP recovery but when I factory reset / wipe data, dalvik, data, system it doesn't format the system
You can try another recovery through odin, if it fails flash stock rom through odin. Make sure you flash one which is as least as new bootloader. Then start from square one.
Witch version of TWRP do you use ?
To do full wipe I use Zoot Wipe script, but be careful it remove everything :
http://forum.xda-developers.com/showthread.php?t=2121347
I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?
cyb3r.pr3dat0r said:
I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?
Click to expand...
Click to collapse
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.
Trilochanaaya said:
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.
Click to expand...
Click to collapse
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?
cyb3r.pr3dat0r said:
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?
Click to expand...
Click to collapse
First of all root your device.
Secondly install philz recovery using odin.
Then flash your desired ROM
(i suggest you aogp dual sim).
PM me if you need any help.
All the best :thumbup:
Press thanks Button
Sent From AWSOME AOGP ROM for I9082
emmc is a partition i believe, if you see such errors, recheck if you are using the correct recovery... I flashed my tablet with wrong recovery and it wiped out all my partitions. It's as good as a brick now if not worse.