I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
sinoka56 said:
I just installed Phantom rom (wiped everything) but it's stuck on the Samsung logo, can't boot into recovery or download mode
:crying:
already waited like 10+ minutes still nothing
update : I got into recovery mode
can't I install phantom rom into a mj5 bootloader?
Click to expand...
Click to collapse
Mj5 is fine for flashing any 4.3 or 4.4.2 rom just click on my signature and look for how to wipe your phone via philz follow those steps and flash phantom rom if still gives you issue then flash latest twrp you'll find the links for it in my signature as well and steps how to wipe via twrp good luck
Sent from my GT-N7100 using Tapatalk
I installed TWRP recovery but when I factory reset / wipe data, dalvik, data, system it doesn't format the system
You can try another recovery through odin, if it fails flash stock rom through odin. Make sure you flash one which is as least as new bootloader. Then start from square one.
Witch version of TWRP do you use ?
To do full wipe I use Zoot Wipe script, but be careful it remove everything :
http://forum.xda-developers.com/showthread.php?t=2121347
Related
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
When you change your rom you need to wipe data from recovery.
FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
spirosoupia said:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
Click to expand...
Click to collapse
1.Do you boot into the Philz recovery or the one you had previous to Odin the recovery? If its philz try wiping data and cache and rebooting.
2.Next check if the md5 of your download matches and you have downloaded the correct zip for your device (lt01wifi). If so factory data reset and then flash again.
3.Make sure you are using ODIN correctly. A good guide can be found here http://forums.androidcentral.com/ambassador-guides-tips-how-tos/300296-guide-samsung-how-flash-stock-rom-via-odin.html
I flashed the stock firmware again and still bootloop.
Then I did a factory reset via the recovery and that was it!!!! My tablet is fixed!!!
I pass the Philz recovery then and root the tablet.
So now I am with the stock ROM and rooted. Thank you!!!
Is your data lost after flashed ?
Image, mp3, video etc..
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Ripshock said:
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Click to expand...
Click to collapse
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Is your device rooted?
Brought to you by SM-T210R
Ripshock said:
Is your device rooted?
Brought to you by SM-T210R
Click to expand...
Click to collapse
yes rooted ,
brajesh0201 said:
yes rooted ,
Click to expand...
Click to collapse
Android-armeabi.universial-root.zip used this package to root
brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
bierma32 said:
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
Click to expand...
Click to collapse
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
brajesh0201 said:
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
Click to expand...
Click to collapse
Im using philz tuoch and i habe no prob.
At philz have check The Mount point (sdcard or sdcard/0 )
If these all not hell flash CWM.
I have no clue what i did with it, but this is on the screen:
Odin Mode
Product name: SM-T210
Current Binary: Custom
System Status: Custon
HW REV: 0x5
It has an image like: Tablet......Yellow triagle with an ! in it.....Computer.
Under that it has the text: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies can't connect to the device. I have no clue what i did all ....
Experts please help !!!
hey
in philz recovery, in wipe options select - clean to install new rom
the goto tab 3 7.0 area get svelte rom , you need to put it on removable microsd with card reader [get one]
the put card back in tab reboot to recovery and flash, firmware updates aren't always good or necessary,
odin should be a last option. stay calm [use the force] and good luck :good:
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
here is the solution of your prob, i font it in the lt02 Thread
bierma32
Post#352 and following Posts.
http://forum.xda-developers.com/showthread.php?p=53154386
Quote:
Originally Posted by*jstath1972*
In the first attempt i made a dalvik cache, cache, system wiping. I installed the rom and made again a dalvik cache, cache wiping and reboot. Then was saying "no Root. Would you like to flash super user in to system?" and then nothing. I made re install for second time the same rom zip with the default "Factory Reset" and everything went fine. Weird ha ? I also use TWRP 2.7.0.0 .*
I hope to help.*
Its funny its only work when you factory reset, My guess would be that something wrong with twrp or updater script.*
Maybe @gr8nole*will know more bout this issue.*
Sent from my Galaxy Nexus using Tapatalk
brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
try to flash the stock ROM Android 4.1.2 ( Jellybean ) from page www.sammobile.com and flash it with odin 3.07 , after you flash with odin sees the recovery of stock and give ' Wipe Data / Factory Reset ' ' and the problem is solved ( I run my me :good: ) and sorry for my bad English that use a translator :silly:
( and the solution suddenly discovered )
I just hope it works for you you too
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
RazaVakil7995 said:
Hi this is a long post so I will highly appreciate it if anyone helps me even after reading this.
I was on xperia z-ized v3.4 (based on android 4.3) with mj5 as the bootloader. I was tired of that rom and wanted to try dn3 rom and downloaded the zip as well but the OP of the rom thread said that twrp recovery is recommended over cwm. So I went to thread given in the page which showed me how to flash twrp. It was just download the zip and flash it in recovery, which is exactly what I did. Now ever since then I am not able to turn on my phone, nor does it go to recovery, it just goes into download mode which made me change my decision. Now I am thinking to downgrade back to 4.1.2 and I will try dn3 rom later on. I downloaded the firmware from sammobile but just wanted to ask that given my previous firmwares and flashes, is it safe to flash or will I risk bricking my phone.
Thanks for reading this and please help me out if you can
Click to expand...
Click to collapse
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
singhpratik87 said:
Well if you still want to try DN3 ROM you can flash philz recovery tar.md5 via odin and then once you boot into recovery you can get twrp zip file that you downloaded previously and flash twrp over philz.That's what i do when i switch recoveries.I never used CWM except when i was on 4.1.2 but once i rooted my phone the same day i switched to philz.If you don't want to try dn3 at the moment yes you can go back 4.1.2 since you are on mj5 bootloader which makes downgrading back to 4.1.2 possible.I'm giving you links below for philz tar.md5 and instructions on how to flash it via odin incase you change your mind.
philz tar.md5
Put your phone into download mode,open odin on pc,uncheck auto reboot in odin,dont touch anything else,connect phone to pc,wait for port ID to lit up and be blue.Select the AP/PDA tab and navigate to flash this downloaded philz tar file.Click start and you are done.Exit odin on pc.Pull battery out your phone.Wait a minute then put it back in and manually enter recovery mode your newly flashed philz recovery will load.Now go and install twrp recovery zip file and select "reboot recovery" in philz advanced options.Your twrp recovery will load.Do all the wipes in twrp by going under advanced wipe (dont wipe external sd and otg) this will fully wipe your internal phone memory clean then go back to main menu and flash DN3.Enjoy.
Click to expand...
Click to collapse
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
RazaVakil7995 said:
Thanks a lot for the help, unfortunately I didn't like dn3 that much so tried to go back to stock but odin shows fail, so stuck with dn3 for a while until I find a solution
Click to expand...
Click to collapse
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
singhpratik87 said:
Well try other 4.4.2 custom TW rom,dn3 isn't the only ROM available on xda for our note II.Look around and I am sure you'll find something that suits you.
Click to expand...
Click to collapse
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
RazaVakil7995 said:
Actually to be honest I want to go back to stock but I odin shows fail, so is there any workaround for that.
PS: even dn3 doesn't boot up now after flashing. Stuck on the note II logo. Tried wiping cache, dalvik cache and factory reset but to no avail
Click to expand...
Click to collapse
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
singhpratik87 said:
Well which recovery are you using now?TWRP?Do you have a back up of any ROM? I suggest go under advanced wipe and wipe everything except external sd card and otg.This will fully wipe your phone.Other suggestion is flashing stock 4.4.2 ROM and then trying custom ROM.
Click to expand...
Click to collapse
Tried whatever you said just now, still not booting up. I am on philz recovery and I did not take any backup. I only have stock 4.1.2 rom which is not getting flashed via odin and I cannot download stock 4.4.2 because my internet connection is slow..
what should I do?
Device information:
I got my Note2 (GT-N7100)
Android version: 6.0.1 (CM13 by Ivan Meler)
Recovery: latest CWM
N7100XXUFND3
Thing is i got unfindable bootware/rootkit on the device that keeps up even after flashing a new rom.
I searched the web and xda on flashing everything to get the device totally unmodified again.
Now i got the last Odin and Adb ready but i'm uncertain where to start.
Think i need to flash it all from the bootloader off. and use the 'Nand Erase All' function?
I don't dare to trial-and-error which might brick.
A question i have:
1. Where to start to flash everything from scratch?
2. Can i lock the bootloader again after?
Try wiping the system, data, and cache with CWM. Boot into download mode, flash a stock ROM from sammobile.com, perform a factory reset after flashing, reboot.
audit13 said:
Try wiping the system, data, and cache with CWM. Boot into download mode, flash a stock ROM from sammobile.com, perform a factory reset after flashing, reboot.
Click to expand...
Click to collapse
Already proceeded this steps. Without succes.
My idea was i need to flash more. When i see the options in Odin i can do more.
Like Pit (repartition)
Like Phone (?)
Like CSC (?)
The stock rom flashes in Odin without any errors? Can you get into recovery after flashing with Odin?