Hello everyone. I'm going to share a way for you to control your CWM install over WiFi, sort-of. Do not ask for a pure WiFi implementation, I am more interested in other projects here that may or may not happen with the release of 5.0 sources and rbox's partial unlock.
Next, here is a list of things you'll need:
A WiFi router
A laptop or WiFi device
patience
time
Now that we have all of this, you will connect your gateway into your wireless router, in order to provide an internet connection. If you do not have a way to plug in your gateway, you may want to explore using DD-WRT and the router as a client-bridge (this will connect to your home's network, then turn the router into a switch). With this completed, reboot your Fire TV to the recovery. You will see that it has an IP on your sub-net (just like your laptop and phone). This is because the router is doing all of the work and connecting the devices, much like if the WiFi inside of the Fire TV was utilized.
All you must do now is type the following:
Code:
adb connect X.X.X.X
where the X's are replaced with the IP shown on the Fire TV's screen.
Now do as you please, you have your WiFi control. If you desire to donate, do so to @rbox He was the one who allowed you to do this stuff in the first place.
Is there any way for the fire TV to connect to it? My university uses it, and I was wondering if I could connect, but the access point is not showing up
Can´t look now because I´m not at home but wasn´t there a setting for a manual AP setup where you could enter the SSID by yourself?
Some organizations may keep a second network available for legacy devices like printers, XBoxes, and older machines. You can check with your university's tech support to see how you can add your device to the list of allowed access for that network.
This isn't a guarantee that this network exists for you, but most enterprise and even some residential-grade equipment have this capability.
Otherwise, you might be able to find a router or range extender that can understand and connect to WPA2-Enterprise to work around this. In a pinch, an old laptop with two wifi cards or a wifi Ethernet port should suffice.
Or you may want to scrap wifi and run an Ethernet cable to your dorm's jack or personal switch.
Related topics found through Googling, but no further help:
https://www.reddit.com/r/cordcutters/comments/2sv1ov/best_option_for_college_wifi/
https://www.reddit.com/r/fireTV/comments/2mydhh/fire_tv_stick_can_you_use_a_wireless_network_that/
Thanks the responses, but neither of them works well for me. there is a secondary unsecured wifi network, but it is just too slow to use, especially for streaming videos. I sideloaded a wifi APK onto it, and the networks DO show up, but there is no way to enter the login information (you need both a username and password.) Anyone know of an app that can do that?
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.amazon.storm.lightning.client.aosp&hl=de
If you are using a wifi remote control app like Wukong Romote, your phone and the AFS has to be on the same network for your phone to be able to find it.
Sent from my LGL41C using Tapatalk
I find the control can be use in this app called CetusPlay, you can find it on google play store
Use a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.
@finkle - this was a good idea, but sadly as soon as the other wifi is selected on the fire stick it changes to the hotel wifi and opens the browser page to enter the credentials, which simultaneously disconnects the remote app! So close ;-(
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
---------- Post added at 07:00 PM ---------- Previous post was at 06:54 PM ----------
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
finkle said:
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Click to expand...
Click to collapse
Thanks To User FINGLE......
Thanks ,..I tried it.. I lost my remote to my firestick... I got the app on my phone...for remote... Firestick was still on previous network....and since we got new internet..service provider... The network was diffrent,....so we changed hotspot on phone, ( to the previous netwrk we had...and I got a diffrent phone...and with the second phone,, I was able to conect with the phone ap remote...[theseconv
QUOTE=finkle;69046260]Use
HTML:
a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.[/QUOTE]
ok i have done everything exactly as you have said, but unfortunately my fire tv is not automatically connecting....Any thoughts on why? I know i reconfigured the hot spot correctly because i disconnected a 2nd smart phone from the current wifi and it automatically found our home network and connected...
What i typically do is connect my FireTV stick to the USB port on my computer, i can then manually send keyevents via ADB to connect the device through the hotel portals, yes it is tedious but once you get it connected you should be able to connect to it via Fire TV remote App on your phone. you can then plug it back into the wall and when it reboots it should auto connect to wifi this time.
P.S. this will only work if you have already previously enabled developer mode and allow adb connection on your fireTV stick.
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
LinzAM said:
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
Click to expand...
Click to collapse
I found this answer on the Amazon help page ( https://www.amazon.com/ask/questions/Tx3ERA8C5GDSLWS?_encoding=UTF8&sort=helpful ) :
All tvs have a cec option under settings. Google search cec settings and it'll help ya. It lets you control hdmi plug ins with the regular tv remote. Tried it on one of my tvs and wouldn't work. Tried it on another tv in the house witch is different brand and it worked. I was able to set the wifi back up and then was able to use the fire stick remote app on my phone. Good luck
Someone confirmed that it worked for them. if not then you can order a new remote fairly cheaply: https://www.amazon.com/gp/product/B00LORGAG6/ref=ask_ql_qh_dp_hza
Problem Solved
Hold down the home button on your Amazon firestick remote until you get a popup on your tv screen that the remote is connected. This will take 5-10 seconds. No internet necessary. Cheers!!
Thank You!
This CEC on my visio worked perfectly. we haven't been able to use one of our firesticks for quite a while now. thank you!! and no... holding down the select button on a diff remote does not work..
Enable the CEC Setting on your TV
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
----
Go into the settings on your tv and enable CEC. I have a Vizio and it worked for me.
In your search engine type: How to Enable HDMI-CEC on Your TV, and Why You Should then click on the HowtoGeek link
In case anyone runs in to this in the future (including myself).
If your stick is rooted then you can manually configure the WiFi over ADB/USB in the file /data/misc/wifi/wpa_supplicant.conf
My situation is that one day i switched my tv input from blue ray player to fire tv stick as ive done for a long time, but this time when itd boot up it would hold on the home screen and the 3 dots, and then network connection lost. But nothing has changed with my wifi, all my other devices still connect to wifi just fine. And i dont have the remote and have been using my phone to navigate my fire tv stick. Any advice?
Now its bootlooping after it shows network connection lost for about 1min then reboots.
Could provide steps as to how to reconfigure Wi-Fi setting in the Fire Stick via ADB?
I bought a Chromecast 2.0 to attach to my TV. All the casting apps work fine from my M9 (T-Mobile stock rooted 6.0,) but screen mirroring does not. I have tried using the Google cast app, and HTC connect. Both connect the the Chromecast, the TV goes black, and my phone says it's casting, but audio that plays is choppy, and the image never appears. Has anyone else had this problem? Are there any settings I can mess with that could fix this?
Thanks.
Sorry for clogging up the forums a bit. I should have done some more testing before I posted.
Protip: Disable your VPN connection before using screen mirroring. I have an openvpn server running in my home network for use when I'm on public wifi networks, and even though it allows access to local resources, it was screwing with the mirroring feature. As long as I remember to turn off the VPN connection while I'm at home, screen mirroring works fine.
My firestick says it is connected to the WiFi, but not the internet. "Home is not available". Sometimes it connects and sometimes it doesn't. I have moved it around but nothing seems to matter. It won't stay connected. I'm confused how it can be connected to WiFi, but not the internet. Can anyone help me please?
I have the 3rd generation Amazon Fire TV. I notice this happens a lot with the FoxNow app as well as when streaming from Amazon Video. I don't see this with Netflix or when I stream from my Plex Media server. Mainly only with Amazon Video and FoxNow. It keeps telling me that Amazon Home is unavailable and it shows in the network status that it's connected to WiFi but not the internet. I'm running on the 5ghz band on channel 153 and all my other devices connected to the router work when the Fire TV states there's no internet. I've unregistered and re-registered my device as well as rebooted it several times, but the issue keeps coming back.
It doesn't happen all the time. There will be some days where there's not an issue with it. But when it happens, I have to reboot the Fire TV or unregister and re-register it on Amazon. I've ran a WiFi scanner and it tells me channel 153 is the best one for me based on my area. The Fire TV is just a few feet away from my WiFi router. I'm using the power adapter that came with the Fire TV in a wall outlet as it won't work with my TV's USB port (not powerful enough).
Our router is brand new (NetGear Firehawk R7000) and our cable modem is fine as well. Like I said, everything else works fine after the Fire TV loses connection.
We only have a 30mbps connection. Could that be it? Didn't seem to bother us when we had a Roku, but I wanted to get something that used the 5ghz channel so I went with the Fire TV since it was on sale.
friendlyphil said:
My firestick says it is connected to the WiFi, but not the internet. "Home is not available". Sometimes it connects and sometimes it doesn't. I have moved it around but nothing seems to matter. It won't stay connected. I'm confused how it can be connected to WiFi, but not the internet. Can anyone help me please?
Click to expand...
Click to collapse
iBolski said:
I have the 3rd generation Amazon Fire TV. I notice this happens a lot with the FoxNow app as well as when streaming from Amazon Video. I don't see this with Netflix or when I stream from my Plex Media server. Mainly only with Amazon Video and FoxNow. It keeps telling me that Amazon Home is unavailable and it shows in the network status that it's connected to WiFi but not the internet. I'm running on the 5ghz band on channel 153 and all my other devices connected to the router work when the Fire TV states there's no internet. I've unregistered and re-registered my device as well as rebooted it several times, but the issue keeps coming back.
It doesn't happen all the time. There will be some days where there's not an issue with it. But when it happens, I have to reboot the Fire TV or unregister and re-register it on Amazon. I've ran a WiFi scanner and it tells me channel 153 is the best one for me based on my area. The Fire TV is just a few feet away from my WiFi router. I'm using the power adapter that came with the Fire TV in a wall outlet as it won't work with my TV's USB port (not powerful enough).
Our router is brand new (NetGear Firehawk R7000) and our cable modem is fine as well. Like I said, everything else works fine after the Fire TV loses connection.
We only have a 30mbps connection. Could that be it? Didn't seem to bother us when we had a Roku, but I wanted to get something that used the 5ghz channel so I went with the Fire TV since it was on sale.
Click to expand...
Click to collapse
Try channel 36 on 5ghz band..
I've had this same issue for a year with no solution. I'm stuck on channel 36 which is the most crowded in my neighborhood
Well, I bit the bullet and purchased the LAN adapter for the Fire TV device and since this past Monday (4/23/2018) after hooking it up directly to my router and not using WiFi, I have not had a single issue. Before that, over the weekend and the past week, I had numerous hang ups and loss of internet (at least, the Fire TV said I had no internet but I did) after watching a movie, or a couple of TV shows.
I'm really thinking the issue is tied to heat (it heats up after using it for one movie or a couple of TV shows) and that causes an issue with the WiFi chip in the device. Since moving to using a LAN cable instead, there doesn't appear to be an issue with this now.
Also, I've noticed where lag/delay between audio and video that slowly creeps in as time moves on while watching a movie has appeared to have disappeared as well. Definitely, something is up with my WiFi. Not sure if it's my router or how it's configured (Netgear Nighthawk), but I have checked various settings (no dual band being used and only used 5ghz band, but the same issue was also on 2.4ghz band when I tried that) and nothing fixed the issue until moving off of WiFi.
I do have a repeater in the house for my wife because her laptop has a crappy wifi controller in it so she can't get a good signal upstairs whereas the rest of us have no issues. But, that's not always plugged in. Only when she needs to use her laptop upstairs so when she's not using it, it's turned off/unplugged from the wall. It also only uses the 2.4ghz band.
But in any case, using the LAN adapter appears to have solved my issue. Only time will tell, but the loss of internet via the Fire TV would happen daily. Now, after 3 days, it hasn't happened once. Knocking on wood that this fixes my issue.
UPDATE 4/26/2018:
Day 3 of using the Fire TV with the LAN adaptor. Watched over 5 hours of Dexter and not one issue. I watch it via Netflix and usually, after a few viewings, Netflix goes into buffering mode. Hasn't happened once this week since getting the LAN adapter. It definitely seems to have fixed my issue.
vic_singh said:
Try channel 36 on 5ghz band..
I've had this same issue for a year with no solution. I'm stuck on channel 36 which is the most crowded in my neighborhood
Click to expand...
Click to collapse
Ya you're right about going with lower / middle of the bands. I noticed this with 2.4ghz band too, I had it set to auto in my router settings and it picked 11, but AFTV didn't like anything 10 or over, so just changed band in router settings manual @1 or 6 and no issues.
Well, over a week now and not ONE single hang up and need to reboot. Definitely something with the WiFi in the device if you ask me. Interference, possibly brought on when the device gets too hot maybe? I dunno. Problem solved if you ask me! So happy now. Love my FireTV even more!