Related
hi fellows as the title says ..dose anyone had an nandroid back or stock rom for this version i serched around the internet and i find no usefull info about this version 4.28.707.10 or this cid T-MOB 101...i brought this phone in china and now i dont know which version can fit and make me revert back to stock so i can update it to JB ...so if anyone has any info on it or you have any links to that perticular download please post it here so i can get it ...thanks in advance
Nani2000 said:
hi fellows as the title says ..dose anyone had an nandroid back or stock rom for this version i serched around the internet and i find no usefull info about this version 4.28.707.10 or this cid T-MOB 101...i brought this phone in china and now i dont know which version can fit and make me revert back to stock so i can update it to JB ...so if anyone has any info on it or you have any links to that perticular download please post it here so i can get it ...thanks in advance
Click to expand...
Click to collapse
look right here, http://forum.xda-developers.com/showthread.php?t=1975140 , there is a 2.17 version for that CID :good:
Can i still flash the rom with different version and have same cid no?
matt95 said:
look right here, http://forum.xda-developers.com/showthread.php?t=1975140 , there is a 2.17 version for that CID :good:
Click to expand...
Click to collapse
thanks for the reply man its a great idea for keeping everything in one place but my problem is my cid is T-MOB 101 and version is **.**.707**(4.28.707.10) and the version there is **.**.111.** so the question is can i still flash that nandroid ?? because i see in lots of post that cid and the version should match to get back to stock isn't that right ??
Nani2000 said:
thanks for the reply man its a great idea for keeping everything in one place but my problem is my cid is T-MOB 101 and version is **.**.707**(4.28.707.10) and the version there is **.**.111.** so the question is can i still flash that nandroid ?? because i see in lots of post that cid and the version should match to get back to stock isn't that right ??
Click to expand...
Click to collapse
you only need to match the CID, that nand should work on your phone, you need to match the RUU and not the nand what's your HBOOT version actually?
My HBOOT
matt95 said:
you only need to match the CID, that nand should work on your phone, you need to match the RUU and not the nand what's your HBOOT version actually?
Click to expand...
Click to collapse
My HBOOT is 0.94.0000 which is very old one i guess as now there are many new one i just want to go back to stock but i can update my h boot and then the install JB from there ..
Nani2000 said:
My HBOOT is 0.94.0000 which is very old one i guess as now there are many new one i just want to go back to stock but i can update my h boot and then the install JB from there ..
Click to expand...
Click to collapse
well you need a certain HBOOT to run the 2.17 nand... but i don't remember which was the required HBOOT for 2.17. the best thing would be to update the HBOOT to the latest version and then flash the nand backup
matt95 said:
well you need a certain HBOOT to run the 2.17 nand... but i don't remember which was the required HBOOT for 2.17. the best thing would be to update the HBOOT to the latest version and then flash the nand backup
Click to expand...
Click to collapse
can you tell me how can i do that ?? becasue the hboot also require me revert to stock rom and lock the phone to finish it aint that the thing ??? or is there any other way i can do that ?? actually there is an update of hboot for my cid..i tried flashing it but it didnt worked for me ...
Yeah, you need to be locked. When you unlock again, it will wipe the phone
Take a nandroid backup and then
fastboot oem lock
Then try hboot update again.
BenPope said:
Yeah, you need to be locked. When you unlock again, it will wipe the phone
Take a nandroid backup and then
fastboot oem lock
Then try hboot update again.
Click to expand...
Click to collapse
so what you mean is first i need to falsh the nandroid back up and then update my Hboot by relocking my phone ??
Nani2000 said:
so what you mean is first i need to falsh the nandroid back up and then update my Hboot by relocking my phone ??
Click to expand...
Click to collapse
no, you first need to update the hboot and then flash the nand backup
matt95 said:
no, you first need to update the hboot and then flash the nand backup
Click to expand...
Click to collapse
yes that's the problem i am on a coustom rom ARHD .so my que is should i have to be on stock rom to update my hboot or i just relock the phone and flsh the hboot ?? and i have another problem when i try to flash the firmware to update my hboot it says your version dosent match so it cannot complete so ...what should i do now ?
Thanks for the help
matt95 said:
no, you first need to update the hboot and then flash the nand backup
Click to expand...
Click to collapse
i just flash the firmware that is there with the nandroid back but it says error maybe the version is not similer for updating my hboot well i think i should either wait for anyone to develop a bypass for hboot or just stay in ics for ever but anyway thanks for helping me with more info .:laugh:
What is the output of
fastboot getvar version-main
BenPope said:
What is the output of
fastboot getvar version-main
Click to expand...
Click to collapse
i'll post all the things so you can have a better idea of whats my phone made of !
D:\HTC ONE X BACK UP\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.94.0000
(bootloader) version-baseband: 5.1204.163U.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.28.707.10
(bootloader) serialno: HT25HW101180
(bootloader) imei: 353043053829837
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
But that version-main doesn't exist!
What's
fastboot oem readcid
BenPope said:
But that version-main doesn't exist!
Click to expand...
Click to collapse
yeah, that's quite unusual
matt95 said:
yeah, that's quite unusual
Click to expand...
Click to collapse
seems like i have an unusual phone ...well i got oem cid as T-MOB 101
BenPope said:
But that version-main doesn't exist!
What's
fastboot oem readcid
Click to expand...
Click to collapse
yes i know that is not there i even checked in chinese websites there all i can find is that this phone belongs to asiapacific i dont know what they mean by that my ime suggest its from germany!! what a mess with this phone and i cannot go back to stock cuz when i got the phone i dont know much about backing up so i just let some guy who is better than me in andriod to falsh a custom rom cuz i dont want to use that chinese version phone with lot of stupid apps which i cannot uninstall at that moment and now i dont have the back up and i am stuck with no updates nothing ....
Might be worth a go:
http://www.4shared.com/zip/ZnUXbKbq/firmware_2171113.html
http://www.4shared.com/zip/lwUAtyRu/Nandroid_2171113_T-MOB101.html
Or are we going in circles?
BenPope said:
Might be worth a go:
http://www.4shared.com/zip/ZnUXbKbq/firmware_2171113.html
http://www.4shared.com/zip/lwUAtyRu/Nandroid_2171113_T-MOB101.html
Or are we going in circles?
Click to expand...
Click to collapse
thanks for trying mate ...i just flash the firmware through fastboot flash zip firmware.zip i didnt nandroid back up it though because its told me that i should update my h boot first which i cannot because of the its say's failed error remote blocked and the one i did is the one you provided . so now i really dont know how can i make it work ?? ca
I'm trying to revive my WFS which i think is softbrick (stuck at htc logo)
I can access the bootloader and fastboot but not adb
I've tried all the all the tutorial here but none seem to work
Please help!:crying:
phone spec
marvel pvt ship s-on rl
hboot - 0.90.000
microp - 0451
radio - 7.46.35.08
Apr 8 2011, 17:45:10
main version 11.33.401.22
cidnum htc_044
p0pc0m said:
I'm trying to revive my WFS which i think is softbrick (stuck at htc logo)
I can access the bootloader and fastboot but not adb
I've tried all the all the tutorial here but none seem to work
Please help!:crying:
phone spec
marvel pvt ship s-on rl
hboot - 0.90.000
microp - 0451
radio - 7.46.35.08
Apr 8 2011, 17:45:10
Click to expand...
Click to collapse
your phone is not rooted i think.
remove battery.
insert battery again.
press volume down + power button
and you will see hboot menu.
try to factory reset your phone.
root? or unlock first?
do i need to root it before i unlock it?
i already did "clear storage" but it didn't work
i want to return at least to stock rom
p0pc0m said:
do i need to root it before i unlock it?
i already did "clear storage" but it didn't work
i want to return at least to stock rom
Click to expand...
Click to collapse
first thing you need unlocked bootloader to flash anything like recovery and all..
after unlocking bootloader u can flash roms and all & also root ur phone..
since if never root your phone..stock rom still in ur phone..nothing changed.
so you just need to factory reset via hboot menu..
if you wana root your phone..
unlock bootloader via htcdev and use htcsupertool..
then you can flash cwm recovery via hboot and also then you can flash stock rom too..if your phn still stuck at htc logo..
and also if u nvr root phn u cn directly go to service center they cn flash stock rom easily and that ll solve ur prob fast
Sent from my Wildfire S A510e using Tapatalk 2
crossfire77 said:
first thing you need unlocked bootloader to flash anything like recovery and all..
after unlocking bootloader u can flash roms and all & also root ur phone..
since if never root your phone..stock rom still in ur phone..nothing changed.
so you just need to factory reset via hboot menu..
if you wana root your phone..
unlock bootloader via htcdev and use htcsupertool..
then you can flash cwm recovery via hboot and also then you can flash stock rom too..if your phn still stuck at htc logo..
and also if u nvr root phn u cn directly go to service center they cn flash stock rom easily and that ll solve ur prob fast
Sent from my Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the advice.
I tried unlocking it using htcdev but it didnt work
Europe RUU works but it did not update the hboot
Other RUU gives me "Error 191"
Proceed to getting the token but it gives me a command error
p0pc0m said:
Thanks for the advice.
I tried unlocking it using htcdev but it didnt work
Europe RUU works but it did not update the hboot
Other RUU gives me "Error 191"
Proceed to getting the token but it gives me a command error
Click to expand...
Click to collapse
hmm what is ur software version 2.13 or 2.26 because in htcdev if you have 2.13 you have to download file or if 2.26 you dont have to.
and second without unlocking bootloader ruu won't work.
if you have unlocked bootloader+cwm recovery then you can flash any ruu.
crossfire77 said:
hmm what is ur software version 2.13 or 2.26 because in htcdev if you have 2.13 you have to download file or if 2.26 you dont have to.
and second without unlocking bootloader ruu won't work.
if you have unlocked bootloader+cwm recovery then you can flash any ruu.
Click to expand...
Click to collapse
how do you know your software version? i can't boot my device, it's stuck at htc logo
this is what appear at 'fastboot getvar all'
version: 0.5
version-bootloader: 0.90.0000
version-baseband: 7.46.35.08
version-cpld: None
version-microp: 0451
version-main: 11.33.401.2
serialno: HT14KTR01305
imei: 358225047104741
product: marvel
platform: HBOOT-7227
modelid: PG7610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3895mV
partition-layout: HTC
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-720d6ffc
hbootpreupdate: 12
gencheckpt: 0
p0pc0m said:
how do you know your software version? i can't boot my device, it's stuck at htc logo
this is what appear at 'fastboot getvar all'
version: 0.5
version-bootloader: 0.90.0000
version-baseband: 7.46.35.08
version-cpld: None
version-microp: 0451
version-main: 11.33.401.2
serialno: HT14KTR01305
imei: 358225047104741
product: marvel
platform: HBOOT-7227
modelid: PG7610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3895mV
partition-layout: HTC
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-720d6ffc
hbootpreupdate: 12
gencheckpt: 0
Click to expand...
Click to collapse
do you have marvel or marvelc?
and software no is under settings>about phone>software information
and see software number.
and yeah try this link.this might help you.you can here root without htcdev help.
http://forum.xda-developers.com/showthread.php?t=1809751
seem like nothing works
crossfire77 said:
do you have marvel or marvelc?
and software no is under settings>about phone>software information
and see software number.
and yeah try this link.this might help you.you can here root without htcdev help.
http://forum.xda-developers.com/showthread.php?t=1809751
Click to expand...
Click to collapse
so after days of searching and trying i still cant revive my wfs
so far what i've done
> download and tried different ruu from shippedroms > gives me error 131
> i tried the wfs all in one toolkit > when i try to get token id i get a command error
> ruu from htcdev gives me an error 191
> when i try to flash images (hboot, system, recovery) > give a checksum or something like that error
^^ i think this because im not rooted or boot loader unlocked
i haven't tried creating a gold card using it and that would be my next step
my question is can i try making it using another phone (a xperia x10 mini)?
or do i need another wfs?
p0pc0m said:
so after days of searching and trying i still cant revive my wfs
so far what i've done
> download and tried different ruu from shippedroms > gives me error 131
> i tried the wfs all in one toolkit > when i try to get token id i get a command error
> ruu from htcdev gives me an error 191
> when i try to flash images (hboot, system, recovery) > give a checksum or something like that error
^^ i think this because im not rooted or boot loader unlocked
i haven't tried creating a gold card using it and that would be my next step
my question is can i try making it using another phone (a xperia x10 mini)?
or do i need another wfs?
Click to expand...
Click to collapse
With goldcard you can flash any ruu but still im confused about your phone version.
Its marvel(GSM) OR marvelc(CDMA)?
But for using goldcard you need two things:
Bootloader unlocked
Cwm recovery
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
With goldcard you can flash any ruu but still im confused about your phone version.
Its marvel(GSM) OR marvelc(CDMA)?
But for using goldcard you need two things:
Bootloader unlocked
Cwm recovery
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
p0pc0m said:
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
Click to expand...
Click to collapse
You need your com to create a goldcard I think.
Sent from my HTC Sensation 4G using xda app-developers app
p0pc0m said:
its gsm sorry i forgot to tell that earlier
the other phone (x10mini) that i'll use to create goldcard is both bootloader unlocked and and has cwm
but its a SE not HTC, can i use that goldcard for wfs?
Click to expand...
Click to collapse
Nopes..sony and htc are different.if you want to create goldcard you need your phone ,sdcard and computer.
Because sdcard uses as copy CID.and you cnt use x10 mini goldcard.
But still you needs unlocked bootloader and cwm recovery to use bl-tool..then you can flash any ruu..
Dnt compare both phone.they are different..
First you need to unlocked ur phone..goldcard and all things comes later if you your phone is bricked and you need stock rom,update radio etc.
EDIT:
first of all you need to root your phone,your bootloader is not updated so you need to update is via htcdev.and then root it.still htcdev not working.i have no idea how to unlock it.
Sent from my HTC Wildfire S A510e using Tapatalk 2
You just want to run stock ROM?? If yes go to service center they will do it for you..
so on my Verizon htc one I wanted to unlock my bootloader and get s-off. I used rumrunner which gave me s-off. after not being able to flash a recovery I was on a forum that suggested I type a certain adb command to see if I was actually unlocked. (I was able to finally get a custom recovery after trial and error) but after using that command It somehow managed to get my device s-on... is there any way to fix this? I don't want to run rumrunner again because it says you have to run that program with the device completely stock.
blake1886 said:
so on my Verizon htc one I wanted to unlock my bootloader and get s-off. I used rumrunner which gave me s-off. after not being able to flash a recovery I was on a forum that suggested I type a certain adb command to see if I was actually unlocked. (I was able to finally get a custom recovery after trial and error) but after using that command It somehow managed to get my device s-on... is there any way to fix this? I don't want to run rumrunner again because it says you have to run that program with the device completely stock.
Click to expand...
Click to collapse
ADB would not have put you S-ON. Can you plug the phone into your computer and reboot to bootloader and run the following command?
fastboot getvar all
And post the results?
blake1886 said:
so on my Verizon htc one I wanted to unlock my bootloader and get s-off. I used rumrunner which gave me s-off. after not being able to flash a recovery I was on a forum that suggested I type a certain adb command to see if I was actually unlocked. (I was able to finally get a custom recovery after trial and error) but after using that command It somehow managed to get my device s-on... is there any way to fix this? I don't want to run rumrunner again because it says you have to run that program with the device completely stock.
Click to expand...
Click to collapse
do you have a custom recovery installed already? if so then:
1. back up current set up in recovery
2. return to stock
3. run rumrunner
4. restore back up from step 1
5. ???????????
6. profit
isdnmatt said:
ADB would not have put you S-ON. Can you plug the phone into your computer and reboot to bootloader and run the following command?
fastboot getvar all
And post the results?
Click to expand...
Click to collapse
here are my results
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 1.12.42.0906
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.10.605.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA37HS910604
(bootloader) imei: 990004280399845
(bootloader) meid: 99000428039984
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4115mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-57eb7f637d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.043s
wiredout46 said:
do you have a custom recovery installed already? if so then:
1. back up current set up in recovery
2. return to stock
3. run rumrunner
4. restore back up from step 1
5. ???????????
6. profit
Click to expand...
Click to collapse
how to i return to stock without s-off
blake1886 said:
how to i return to stock without s-off
Click to expand...
Click to collapse
is your bootloader still unlocked? you can check it via the bootloader screen.
wiredout46 said:
is your bootloader still unlocked? you can check it via the bootloader screen.
Click to expand...
Click to collapse
my bootloader is unlocked
blake1886 said:
my bootloader is unlocked
Click to expand...
Click to collapse
Follow these instructions, then S-OFF from scratch:
http://forum.xda-developers.com/showthread.php?t=2475216
isdnmatt said:
Follow these instructions, then S-OFF from scratch:
http://forum.xda-developers.com/showthread.php?t=2475216
Click to expand...
Click to collapse
but my phone is s-on... doesnt that say i need s-off to use the ruu?
isdnmatt said:
Follow these instructions, then S-OFF from scratch:
http://forum.xda-developers.com/showthread.php?t=2475216
Click to expand...
Click to collapse
this is the command that was suggested i typed and gave me s-on
fastboot oem writesecureflag 3
blake1886 said:
this is the command that was suggested i typed and gave me s-on
fastboot oem writesecureflag 3
Click to expand...
Click to collapse
Somebody fooled you then. That command is used to change back to S-On.
GrayTheWolf said:
Somebody fooled you then. That command is used to change back to S-On.
Click to expand...
Click to collapse
is there any way to fix this?
blake1886 said:
is there any way to fix this?
Click to expand...
Click to collapse
At this point try running the rumrunner again will probably work. No other way available
blake1886 said:
my bootloader is unlocked
Click to expand...
Click to collapse
if your bootloader is unlocked you can flash a rom.
i had my bootloader unlocked at day one. you need a stock rom, and stock recovery and rumrunner should work.
I ran rumrunner with cwm installed and it worked fine.
Sent from my Nexus 7 using Tapatalk
The recovery does not need to be stock, I ran Rumrunner with the TWRP recovery had it worked just fine. What is important for Rumrunner is the stock rom and stock kernel, without those you will get errors.
When I was trying to get Rumrunner to work I was having a lot of trouble since I htcdev unlocked my phone on day one and had been flashing roms since then. I tried flashing every stock rom I could find and none of them worked for me, I even tried flashing partitions individually but nothing I tried could get Rumrunner to start the pourings sequence. The only thing that saved me was that I found a nandroid that I had saved on my hard drive that I completely forgot about. After I flashed the nandroid and enabled/diabled what needed to be, I ran Rumrunner and finally it completed after only 3 pourings.
SoCmodder said:
I ran rumrunner with cwm installed and it worked fine.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Wozzie said:
The recovery does not need to be stock, I ran Rumrunner with the TWRP recovery had it worked just fine. What is important for Rumrunner is the stock rom and stock kernel, without those you will get errors.
When I was trying to get Rumrunner to work I was having a lot of trouble since I htcdev unlocked my phone on day one and had been flashing roms since then. I tried flashing every stock rom I could find and none of them worked for me, I even tried flashing partitions individually but nothing I tried could get Rumrunner to start the pourings sequence. The only thing that saved me was that I found a nandroid that I had saved on my hard drive that I completely forgot about. After I flashed the nandroid and enabled/diabled what needed to be, I ran Rumrunner and finally it completed after only 3 pourings.
Click to expand...
Click to collapse
i was running into issues with rumrunner until i flashed a stock recovery and stock boot.img, after that everything worked.
wiredout46 said:
i was running into issues with rumrunner until i flashed a stock recovery and stock boot.img, after that everything worked.
Click to expand...
Click to collapse
Stock boot.img is what you need. You don't need the stock recovery. I also did it with TWRP as my recovery.
karn101 said:
Stock boot.img is what you need. You don't need the stock recovery. I also did it with TWRP as my recovery.
Click to expand...
Click to collapse
so if I have an unlocked bootloader and I am rooted, as long as I have a stock boot.img and stock rom I can run rumrunner again and nothing will be harmed? if so, where can I get this stock boot.img?
blake1886 said:
so if I have an unlocked bootloader and I am rooted, as long as I have a stock boot.img and stock rom I can run rumrunner again and nothing will be harmed? if so, where can I get this stock boot.img?
Click to expand...
Click to collapse
Should be able to just flash the stock .10 Full Odexed rom that I posted.
It contains the stock rom files and Boot.img.
Then run Rumrunner.
Hey all
Just bought a M8 and I wanted to root if for a few apps I use, however I didn't know that by putting a custom recovery mod I would not be able to update my phone. So I am trying my best to get it back to stock however I can not find a RUU that matches my CID. Could someone please help me find a way to get my phone back to stock so I can get updates with no problems.
-Cheers
P.S: Lesson learnt, always back up your phone before attempting this bull**** -.-, miss my s4. Could find anything I needed on that thing.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *CENSORED*
(bootloader) imei: *CENSORED*
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B63000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I have a posted a link to a backup on mega. Search me.
You don't need to unroot to get updates. If you're s-off just flash a stock recovery. If your s-on flash a stock recovery and relock the boot loader. Takes about 2 mins to do either.
ihave prblem
ashyx said:
You don't need to unroot to get updates. If you're s-off just flash a stock recovery. If your s-on flash a stock recovery and relock the boot loader. Takes about 2 mins to do either.
Click to expand...
Click to collapse
hi any help please iwant to go back stock room on htc on m8 and ihave on it caynogenmod and icant make fastboot of on mobile cant found it and my phone
unloked and when i install room stoc with recovery my phone crashed
what can ido to goo back to stook room
and thanksssssssssssss
ashyx said:
You don't need to unroot to get updates. If you're s-off just flash a stock recovery. If your s-on flash a stock recovery and relock the boot loader. Takes about 2 mins to do either.
Click to expand...
Click to collapse
When I mean unroot, i mean my recovery mode wont allow me to do uodates due to sense.
Also do I need to use a RUU that matches my cid or can i flash any generic os onto my htc? sorry i am a real rookie.
arkwolf said:
When I mean unroot, i mean my recovery mode wont allow me to do uodates due to sense.
Also do I need to use a RUU that matches my cid or can i flash any generic os onto my htc? sorry i am a real rookie.
Click to expand...
Click to collapse
Like I already said all you need do is flash one of the stock recoveries from this thread, use whichever you had originally for your CID.
http://forum.xda-developers.com/showthread.php?t=2701376
You can't ota with a custom recovery.
I love ViperROM and would never want to go back. They are very good about getting updates out pretty quick. So not long after an official OTA comes I think Viper is quick on it. I believe we already had one for the M8. My friend has tried a few roms and thinks Viper is the best.
ashyx said:
Like I already said all you need do is flash one of the stock recoveries from this thread, use whichever you had originally for your CID.
http://forum.xda-developers.com/showthread.php?t=2701376
You can't ota with a custom recovery.
Click to expand...
Click to collapse
Hey man, I wouldn't of asked this question if I could simply find one to match. On that thread I can not find a single one that matches my phone.
arkwolf said:
Hey man, I wouldn't of asked this question if I could simply find one to match. On that thread I can not find a single one that matches my phone.
Click to expand...
Click to collapse
What was your original recovery version?
ashyx said:
What was your original recovery version?
Click to expand...
Click to collapse
no idea, anyway to find out?
I just looked at the software version of my phone under About and downloaded the matching recovery. Then I flashed the recovery, installed the OTA update, and reflashed TWRP after.
someone31988 said:
I just looked at the software version of my phone under About and downloaded the matching recovery. Then I flashed the recovery, installed the OTA update, and reflashed TWRP after.
Click to expand...
Click to collapse
My software version is 1.54.708.5, cant seem to find any version on the web that matches.
arkwolf said:
My software version is 1.54.708.5, cant seem to find any version on the web that matches.
Click to expand...
Click to collapse
I'll have a look tomorrow or the weekend, I might be able to hook you up. I have a couple of OTAs kicking around.
arkwolf said:
My software version is 1.54.708.5, cant seem to find any version on the web that matches.
Click to expand...
Click to collapse
Did you read anything on the stock backup page?
As long as the base number is the same then you should be able to flash a recovery that matches. You have software version 1.54.708.5 so just flash one that begins with 1.54.
The nearest is:
STOCK RECOVERY 1.54.707.5
Nothing will happen so just go ahead and try it.
Here's the OTA, but it won't install unless you already have the stock OS installed.
http://yun.baidu.com/s/1bnlFoDp
ashyx said:
Did you read anything on the stock backup page?
As long as the base number is the same then you should be able to flash a recovery that matches. You have software version 1.54.708.5 so just flash one that begins with 1.54.
The nearest is:
STOCK RECOVERY 1.54.707.5
Nothing will happen so just go ahead and try it.
Here's the OTA, but it won't install unless you already have the stock OS installed.
http://yun.baidu.com/s/1bnlFoDp
Click to expand...
Click to collapse
Ill do a backup and charge my phone tonight then I will give this a shot.
arkwolf said:
Ill do a backup and charge my phone tonight then I will give this a shot.
Click to expand...
Click to collapse
I've extracted and uploaded the stock recovery for your version, extract and flash via fastboot:
http://www.mediafire.com/download/h3iaxx95b2i8rmf/recovery_1.54.708.5.zip
ashyx said:
I've extracted and uploaded the stock recovery for your version, extract and flash via fastboot:
http://www.mediafire.com/download/h3iaxx95b2i8rmf/recovery_1.54.708.5.zip
Click to expand...
Click to collapse
If this works you will have my eternal gratitude.
Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)
pant3ras said:
Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)
Click to expand...
Click to collapse
You still have KitKat firmware, as shown by your OS version. You CANNOT flash a modified firmware package while S-On. You need to either run a signed RUU, or go back to stock and use HTC's/your carrier's OTA updates.
Do you have a stock ruu? or maybe how to s-off? because i cant find anywhere firewater.
Maybe this will help with something:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
So can anybody can help me? Please i am stuck on this. And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error. Can someone help me? Please.
What firmware did you try to flash? It looks like it was GPE firmware.
Is your bootloader screen black or white now?
My bootloader screen it's black, it's that important?...
And the firmware was download from HDRevolution website.
pant3ras said:
My bootloader screen it's black, it's that important?...
Click to expand...
Click to collapse
Yup, that's very important. Black hboot screen is the GPE version (and white is Sense version hboot). You at least partially flashed a GPE firmware. This isn't supposed to happen with s-on (firmware for other versions should be blocked). But I do remember a while back, a few folks having the same issue; where a GPE firmware or RUU partially flashed (with s-on) and caused some problems.
pant3ras said:
And the firmware was download from HDRevolution website.
Click to expand...
Click to collapse
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
---------- Post added at 12:03 PM ---------- Previous post was at 12:03 PM ----------
pant3ras said:
And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error.
Click to expand...
Click to collapse
What RUU (file name) are you trying to flash?
redpoint73 said:
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
Click to expand...
Click to collapse
The firmware i flash was 3.11.1700.5 yes.
redpoint73 said:
What RUU (file name) are you trying to flash?
Click to expand...
Click to collapse
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.
pant3ras said:
The firmware i flash was 3.11.1700.5 yes.
Click to expand...
Click to collapse
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
pant3ras said:
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
Click to expand...
Click to collapse
That is the proper RUU for the AT&T version; and your bootloader is relocked, as it should be for RUU.
So I think the problem is the GPE firmware you flashed before.
Try flashing the proper firmware first, then RUU again, and hopefully that will work.
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work.
EDIT: Forgot to post the firmware link: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.
Click to expand...
Click to collapse
That RUU will not work, anyway. Its for the Developer Edition, so the only way to run it would be to change your CID (s-off required, and working OS is needed to s-off).
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
pant3ras said:
or maybe how to s-off? because i cant find anywhere firewater.
Click to expand...
Click to collapse
Firewater was discontinued by its devs in December 2014. Since it has an online component (needed to connect to servers), it won't work even if you find the firewater binary.
Sunshine is the only current working s-off method, and as I mentioned, it requires a working OS to work.
redpoint73 said:
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
Click to expand...
Click to collapse
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
redpoint73 said:
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work
Click to expand...
Click to collapse
Where can i find this firmware?
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?
pant3ras said:
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
Click to expand...
Click to collapse
Yes, firmware needs to have the same CID and MID. But the 3.11.1700.5 firmware doesn't go with your CID and MID (CWS__001 and 0P6B12000)
"1700" firmwares (such as 3.11.1700.5) are for the Google Play Edition (GPE) with CID of GOOGL001 and MID of 0P6B17000.
Proper firmwares for your AT&T CID and MID will have the number "502" in the position x.xx.502.x
pant3ras said:
Where can i find this firmware?
Click to expand...
Click to collapse
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?
Click to expand...
Click to collapse
That's right. And as I already stated, sunshine requires a working OS, which you don't have. And since getting the OS working again seems to be the main reason you want to get s-off, you see its quite pointless.
redpoint73 said:
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml.
Click to expand...
Click to collapse
No problem And to flash this firmware i can do it like this:
f you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
pant3ras said:
No problem And to flash this firmware i can do it like this:
Click to expand...
Click to collapse
Yes, exactly.
redpoint73 said:
Yes, exactly.
Click to expand...
Click to collapse
I get this error when i try to flash the firmware:
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
sending 'zip' (57484 KB)...
OKAY [ 2.570s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.611s
Click to expand...
Click to collapse
pant3ras said:
I get this error when i try to flash the firmware:
Click to expand...
Click to collapse
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.
redpoint73 said:
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.
Click to expand...
Click to collapse
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock
pant3ras said:
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock
Click to expand...
Click to collapse
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.
redpoint73 said:
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.
Click to expand...
Click to collapse
And how i can unlock the bootloader again? and flash the TWRP?
pant3ras said:
And how i can unlock the bootloader again? and flash the TWRP?
Click to expand...
Click to collapse
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.
redpoint73 said:
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.
Click to expand...
Click to collapse
Ok, i succed to instal the TWRP and i unlock the phone, but i have no ideea what rom to instal. Can you help me with that please? I'm scare i will broke my phone again if i install something on my own again )