Develop Bugs

speaker not working

my phone speaker has stopped working, can only use on speaker phone. Any ideas or know where i can get spare parts.

i really dont see htc getting spacial custom speakers made for their phones it would be too expensive and there really would be no reason to
so if i were you i would
http://forum.xda-developers.com/showthread.php?t=275788
take apart my device
and get the part nr from the speaker or simply remove the speaker
and take it to a electronic store and get one like it

The speaker on my mini s stopped working shortly after using headphones in the headphone socket.
I googled the problem and read somewhere (can't remember where) that a solution might be to "blow" into the earphone socket.
They couldn't be serious, could they??? So I blew, and blow me, it works ok again. Maybe muck gets into the socket. As I say, it worked for me.

Headset connector causing issues with internal speaker..
Before you start pulling apart your unit (and voiding any warranty left), make sure to try a bit of Electrolube contact cleaner into the headset connector (and a few insert / removes of the headphones).. The little metal ground pin seems to deform and lock 'out' sometimes.. causing the PDA to get stuck in 'headset inserted' mode...
Unfortunately the only way to fix this if the connector is bent is often to bend the connector back into place (open the unit).
Good luck!
Andy
www.pressdigital.com.au
Press Digital Support Team

[Q] Faulty Headphone jack??

I had a blue GS3 before and the headphones fit snug and now I have a new white one and if I turn the headphone jack slightly it cuts out completely on one ear and is very loose crackly also.....should I take it in the store for a replacement or what?

I'm having the same problem. Pissing me off. I'm noticing that it's with mostly with aux cables with 2 levels instead of 3 (don't notice with the OEM Samsung cables)
*although I have the white one*
tried different roms too, same problem.. didn't have this issue with me gs2

Im gonna take mine to the tmobile store and see what they say. Ill respawn later
Sent from my SGH-T999 using xda app-developers app

had that problem with a 3.5mm audio jack that was attached to the car. keep the audio jack plugged into your phone, reboot with it still plugged in, and it should start to work. that is, unless the wire is bad, or the base is too big- causing it to not go in fully.

is your headphone jack a right angle? i had the same issue with my one x that i returned but getting a headphone jack to jack adapter so instead of having a right angle and going to a straight one fixed it. waiting on a new adapter so i can try the same fix on my s3 that has the same issue with my right angle headphone jack...

having the same issue with multiple aux cables. rebooting while plugged didn't help
Sent from my SGH-T999 using xda app-developers app

Solution
Yep, That's the same here. Turns out that the jack is 'kinda cheapo' plastic that is, and if like me you use larger headphones (non-earbuds) that the side to side pull of the larger plug will eventually force a contact pin to no longer make that contact. You can pull and twist the cord and sound comes in and out on one side. in my case the right side.
Solution: I bought a replacement Speaker/Headphone assembly. Took me less then 5 minutes to disassemble the device and pop in the new OEM part. Problem solved. I got the part here ---> http://www.2buya.com/spare-parts/components/genuine-samsung-galaxy-s3-i9300-speaker-intenna-ear-jack-gh59-12159a.html
I chose this rather then wait for Mobilicity to take weeks to get it fixed for me.
Note: Ignore the i9300 part label. The stock part I removed from my t-999v also said i9300 on it. There the same.

Did you test the headphones on anything else? Try another set of headphones?

Of course
psykhotic said:
Did you test the headphones on anything else? Try another set of headphones?
Click to expand...
Click to collapse
Naturally. I tested on two identical Sony studio monitors, and a few earbuds. The problem was 100% hardware.

Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!

Hope So
arctic84 said:
Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!
Click to expand...
Click to collapse
That's a possibility, albeit a slim one. I used a jewelers loop in my case. Inside are multiple contact pins. Not all are used for sound. One of my pins was 'pushed' inward. That's why jiggling the plug causes a temporary solution. After I removed the original part I dissected it. The pins are set into the molded plastic as a single piece. The pins themselves are a single ribbon bent to flex a bit.
I figure in my case to much flexing of a the heavier plug with the weight of the coiled cord (Sony MDR-7505 Headphones) caused it to mash inward as I walked around. I'll never know for sure.
I hope it is just lint in the OP's case. If not at least parts are available. Non OEM parts are even less then what I paid. That or just wait for the repair done by Samsung.

_Kippo_ said:
That's a possibility, albeit a slim one. I used a jewelers loop in my case. Inside are multiple contact pins. Not all are used for sound. One of my pins was 'pushed' inward. That's why jiggling the plug causes a temporary solution. After I removed the original part I dissected it. The pins are set into the molded plastic as a single piece. The pins themselves are a single ribbon bent to flex a bit.
I figure in my case to much flexing of a the heavier plug with the weight of the coiled cord (Sony MDR-7505 Headphones) caused it to mash inward as I walked around. I'll never know for sure.
I hope it is just lint in the OP's case. If not at least parts are available. Non OEM parts are even less then what I paid. That or just wait for the repair done by Samsung.
Click to expand...
Click to collapse
Hmm, I think i'm starting to have the same issue as you. When I had my LG i had the issue with the plug and lint.. it seems this time with the S3 it's just not as well made. Where would you be purchasing the part from? I would consider fixing it on my own..

arctic84 said:
Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!
Click to expand...
Click to collapse
Unfortunately, I have the same problem, I will try to follow your method of

Thank you!
Using the Galaxy Nexus and I had just purchased the Klipsch s4a earbuds (amazing purchase for anybody who's an audio lover without incredibly deep pockets) and the audio kept cutting unless I had the jack placed in a specific manner --which is impossible to keep in a jacket, so I came across this thread and wondered how the hell lint can get into such a small hole. I checked by digging a toothpick till the end and scraping out a massive chunk.
Earbuds work amazingly now.
Thank you XDA,
-Aero

Aerolith514 said:
Thank you!
Using the Galaxy Nexus and I had just purchased the Klipsch s4a earbuds (amazing purchase for anybody who's an audio lover without incredibly deep pockets) and the audio kept cutting unless I had the jack placed in a specific manner --which is impossible to keep in a jacket, so I came across this thread and wondered how the hell lint can get into such a small hole. I checked by digging a toothpick till the end and scraping out a massive chunk.
Earbuds work amazingly now.
Thank you XDA,
-Aero
Click to expand...
Click to collapse
I'm having the same problem, but for me it's worse when the headphones go too far down. In other words I intentionally put some tiny bits of paper into the hole and now it doesn't cut out as easily. But still if I move the plug too far to one side it'll cut off, which is really annoying when it's in my pocket and I occasionally bump the chord plug with my hand. I generally use iphone earbuds. I've read that the samsung jacks are a slightly different size than standard. This might contribute to the problem.

baillou2 said:
I'm having the same problem, but for me it's worse when the headphones go too far down. In other words I intentionally put some tiny bits of paper into the hole and now it doesn't cut out as easily. But still if I move the plug too far to one side it'll cut off, which is really annoying when it's in my pocket and I occasionally bump the chord plug with my hand. I generally use iphone earbuds. I've read that the samsung jacks are a slightly different size than standard. This might contribute to the problem.
Click to expand...
Click to collapse
Where did you read that Samsung jacks are a different size? I have used several different 3rd party headphones and have not had a single issue. They all fit and work perfectly.
If anything is made with a different size, I'd be much quicker to suspect Apple before Samsung. They love building proprietary hw so people will be forced to do things their way!
Have you tried a different brand of headphones? It is possible the jack itself is messed up somehow too though.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
Where did you read that Samsung jacks are a different size? I have used several different 3rd party headphones and have not had a single issue. They all fit and work perfectly.
If anything is made with a different size, I'd be much quicker to suspect Apple before Samsung. They love building proprietary hw so people will be forced to do things their way!
Have you tried a different brand of headphones? It is possible the jack itself is messed up somehow too though.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Honestly I've only tried my old and new iphone earbuds. Both have the same problem, but what I discovered by shaving the plastic away from the tip of the jack is that the further in it goes the more it cuts off, hence shoving paper into the hole to keep it from going in too far.
Another thing I did notice is that this problem started when the headphones became much looser. When I first bought the SGS3 I had to really push hard to get the headphones into the phone. I could literally drop the phone from my pocket and it wouldn't detach and would just dangle from my ears. Now it comes out really easily. Clearly something isn't gripping well enough. That seems to be the real issue I guess, but I have no idea how to get in there and fix it. I don't want to risk breaking my phone trying to take it apart.

sounds like the inside of the jack is messed up. When you were having to push hard to put them in, it most likely bent or wore out the part it snaps into over time.
Only real solution to that, that I can think of, would be to replace the jack I'm afraid.
Sent from my SGH-T999L using xda premium

[Q] Fried Headphone Driver?

So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.

brycestejskal said:
So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.
Click to expand...
Click to collapse
It's a common issue with these phones. I went through the same thing you did, ended up replacing the jack multiple times to no avail. Eventually just cashed in on my phone insurance and had them send me a new one. As far as I could find, no one was able to resolve the issue once it began happening, but it would gradually get worse.
Sorry to be the bearer of bad news, but I'd hate for you to chase your tail around as I did. Temporary fix is putting pressure from the front of the phone to the back in a pinch fashion about where the headphone jack is. Goodluck!

Try using a hair dryer on it for a few minutes (medium to no heat with a fast sweeping motion... not concentrating the air on it 100% of the time). There may be some moisture in the connection that might be messing with it (happened a few times with my portable devices and it helped all the time).

brycestejskal said:
So I am having a weird issue with my headphone jack. I have replaced it to no avail.
One day it just started getting all static-y and then cut out in a period of 10 seconds or so. If I wiggle the headphone jack it will come back on. However, without even touching the device, it cuts back out sometimes.
I have tried flashing different ROMS so I know its not software related.
I had not played with any audio software that boosts gain that could have damaged it that way.
As I previously stated, I ordered a replacement jack and replaced it, making sure the ZIF connector is snug and making contact.
It does it with anything plugged into my headphone jack, any pair of headphones, any stereo with a 3.5mm to RCA cable, anything.
Has anyone experienced this? I have a feeling whatever circuitry that drives the headphone jack itself is damaged.
Audio is always fine over the speaker or bluetooth.
Thanks in advance.
Click to expand...
Click to collapse
I have fixed tons of these on our phones. Common issue. That part is like 5 bucks the you need to replace. Taking the phone apart to do so, its pretty simple. on a scale of 1-10 10 being hardest i give it a 3. I can assure you wont void warranty because there's nothing to void, lol. If you need help advice or want me to do it for ya, send me a message.

nidnarb said:
I have fixed tons of these on our phones. Common issue. That part is like 5 bucks the you need to replace. Taking the phone apart to do so, its pretty simple. on a scale of 1-10 10 being hardest i give it a 3. I can assure you wont void warranty because there's nothing to void, lol. If you need help advice or want me to do it for ya, send me a message.
Click to expand...
Click to collapse
What is the part you are referring too? I have already replaced The headphone jack and it did not fix it.

If you replaced the internal jack. Then 1 you ordered a defective one or 2 your main board is fried. If you bought the part from China its probably bad. Edit: did you actually replace the headphones yet?
Sent from my SGH-I317 using Tapatalk

nidnarb said:
If you replaced the internal jack. Then 1 you ordered a defective one or 2 your main board is fried. If you bought the part from China its probably bad. Edit: did you actually replace the headphones yet?
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I ordered it from a US seller. And yes the headphones were the first thing I replaced. The headphone circuitry must be fried. Oh well. Thanks for the help guys.

Did you clean the area with 99% alcohol?
Sent from my SGH-I317 using Tapatalk

Static noise when headphones are plugged-in

Hello,
So I have my Zenfone 2 since some months now and since the start, my phone has a problem:
When I plug earphones or headphones, there's a static noise on the left earphone (or on the left side of the headphone).
I contacted Asus, they told me to update my firmware, which I did (I even updated to MM today), but it didn't fix the issue. So they told me to RMA it.
I'm just posting this to know if someone here got the same problem and if he fixed it. I saw a post on a forum which said to deactivate every single sound (notification, etc) and only activate multimedia sounds. For some reason, it worked, and I didn't ear the static noise again but some days later. I tried to do this operation again but it doesn't seem to work.
Thanks for your help,
Best regards,

Have you tried cleaning your jack input?

oguz298 said:
Have you tried cleaning your jack input?
Click to expand...
Click to collapse
I thought of that but I don't really know how to do to be honest, I don't wanna break anything. How should I do it? Should I wet the tip of a cotton swab and "polish" the jack input?
Thanks for your reply!

Spidersouris said:
I thought of that but I don't really know how to do to be honest, I don't wanna break anything. How should I do it? Should I wet the tip of a cotton swab and "polish" the jack input?
Thanks for your reply!
Click to expand...
Click to collapse
Usually i dont use liquids on my phone. Get a pin and a light source. First look inside of the jack if there is some dust or cotton thingys take out with pin

oguz298 said:
Usually i dont use liquids on my phone. Get a pin and a light source. First look inside of the jack if there is some dust or cotton thingys take out with pin
Click to expand...
Click to collapse
Hello!
I tried to see if there was some dust in it but couldn't find anything. I, however, used the pin but the problem still persists
I noticed that when I was plugging in my earphone, if I plug in "at the middle" of the jack, there will be sound on the left earphone but not on the right. If I plug it in completely (when you hear the "click" sound), then there'll be sound on the right but not on the left earphone, like I first said on the first post. Maybe this can help you.. I'd like to not send it but if I really have to, I will ._.
Thanks for your help.

Have you tried another headphones?

oguz298 said:
Have you tried another headphones?
Click to expand...
Click to collapse
Yeah, I've tried 3 different headphones but the problem still persists.

You can clean it with a compressed air can, the kind that is used to clean computers. I have one at home to clean my keyboard from tieme to time and have also used it to clean the headphone jack, since it doesn't use any liquid. You can get one at the local computer store or online from Amazon and similar sites

jman0 said:
You can clean it with a compressed air can, the kind that is used to clean computers. I have one at home to clean my keyboard from tieme to time and have also used it to clean the headphone jack, since it doesn't use any liquid. You can get one at the local computer store or online from Amazon and similar sites
Click to expand...
Click to collapse
Hello,
Fortunately, I had a compressed air can at home. I tried to clean it with that but the problem is still here
Thanks for your help though, I really appreciate it.

So I "resolved" my problem.
Since I think my jack is broken, I bought this on Amazon. So I did a little setup so I can properly hear music/sounds:
I have a Logitech G430. When I want to listen to music on my phone, I plug my earphones on the G430 adapter, then I plug the USB cable into the USB-microUSB adapter I just bought, and I plug the microUSB cable to my phone. And it works perfectly!
Some may say It's a pretty rough setup, but for me, as long as it works, that's perfect.
Thanks for your help!

Spidersouris said:
So I "resolved" my problem.
Since I think my jack is broken, I bought this on Amazon. So I did a little setup so I can properly hear music/sounds:
I have a Logitech G430. When I want to listen to music on my phone, I plug my earphones on the G430 adapter, then I plug the USB cable into the USB-microUSB adapter I just bought, and I plug the microUSB cable to my phone. And it works perfectly!
Some may say It's a pretty rough setup, but for me, as long as it works, that's perfect.
Thanks for your help!
Click to expand...
Click to collapse
I'm sure a pair of cheap BT headphones is cheaper than that setup. Anyway, if you want to keep using your 3.5mm headphones (I would since mine are very nice and were expensive) you can also try a 3.5 to BT adapter, which is also a cheap and nice option. Music through BT is usually of less quality than through the audio jack, but it¡s better than nothing and you don't need so many cables.
Something like this: https://www.amazon.com/dp/B00UUDZSKE
That one is $19, but you can probably get a cheaper one from a Chinese store such as Dealextreme, GearBest, etc. I have one which I got on eBay years ago and I think it was worth something around €10

Headphone Socket - One ear stopped working

Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks

nnila said:
Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks
Click to expand...
Click to collapse
First of all don't buy any other headphones try to lend headphones from friend or family that are working and they can confirm they're work...
next try to clean headphone jack with isopropylealcohol like in this video (before cleaning just pull out battery just for safety, after cleaning give it some time to dry out, it's really important)
https://www.youtube.com/watch?v=hZL9MFKJQec
and test it and you'll see, if there will be still same problem your jack connector is gone and need repair