Related
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Epic Fail, Wrong Forum............................................................................................................Reportet.
reinstall driver , format your computer ??
And please note that here Development Forum
pls post it to right place -____-
Don't be so mean. Have you ever got into despair when having a problem? Have you though that the forum name is not the most relevant one? By the way, where should a question like this be posted?!
TO answer the question... it is not easy so solve. You will need to clean your PC of all possible traces of old drivers. To do that, with the phone disconnected, go to Device Manager on PC (google if you don't know how). Then, remove any possible references to your phone using the information from here: http://technet.microsoft.com/en-us/magazine/ff184583.aspx
After that, install Sony PC Sync software. Follow the steps. At the end, it should tell you that you should connect phone.
Everything should work now (your phone will be finally re-discovered).
Before you do that, also try to disable Debugging on the phone and set the PC connection to MTP.
Good Luck!
okty2k said:
By the way, where should a question like this be posted?!
Click to expand...
Click to collapse
Preferably on the flashtool thread, failing that the Q&A section, after trying to solve the issue instead of creating a new thread/post after the first failed attempt at something.
Sent from my CM9'd Ray
Try reinstalling drivers from flash tool/drivers
amulbaby said:
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Click to expand...
Click to collapse
first, you start with fresh windows install, after install flash tools
rod555 said:
first, you start with fresh windows install
Click to expand...
Click to collapse
Bit extreme unless all else fails.
or you try with one Virtual machine... Vmware
I have really searched and searched whatever i could but could not achieve any thing sorry for opening a new tread but i am really desperate for fixing my G.
So to start i was on Art Mod v7 and i saw that he posted a black theme so i installed it after installing some system stop responding what i guessed that it might be i didn't wipe cache, well i did that and got into soft brick, i am not blaming him for any thing it was all me , so i should have flashed new kdz but i didn't do that i flashed teenybin Files i dont know why i did that but i did resulted in a different kind of brick.
So problem is i have fastboot i have download mode but device some times get detected on download some times it doesn't when it did i tried flashing kdz through lg kdz flasher but resulted in continuous operation break also no driver is detected in fastboot and more over no recovery as it is in secure boot. I am a noob so please do bear my questions.
do kindly help LGOG is in continous bootloop more to add.
some what LGNPST detects phone in download mode the same application given with teenybin.
Kindly do help i know about android i just read silently but this time i am unable to solve it.
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
thank you for replying
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?
Irazor73 said:
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?
Click to expand...
Click to collapse
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help
Thank you bro for agian replying
malimukk said:
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help
Click to expand...
Click to collapse
But it didnt help either
i am getting this error
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something
I got it, done it
malimukk said:
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something
Click to expand...
Click to collapse
Well i have retrieved my mobile from qusb_dmode means from hardbrick :victory:
alot of info trust me alot of it
Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I have the same problem, at around 10% of flashing i get the same error:
"please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu "
What did you end up doing? I've been trying for weeks to unbrick my phone i even took it to 3 cellphone repair guys in my town and no one knows how to unbrick it.
Please get back to me! Im stuck.
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Hi folks,
Dead P8000 on my hands here, botched recovery flash, not even sure what happened there.
MTK phones are famous for being unbrickable but this case is a bit beyond me...
1. Phone is still detectable over USB on Windows, which is nice.
2. After pressing Download on SP Flash Tool, I connect the phone to the cable, but nothing happens.
3. This machine was previously able to flash the same phone without problems.
I've used SP Flash Tool to revive many phones before so I'm not exactly a noob with it but there's probably some hidden combination somewhere which I don't already know.
Any ideas? Thanks!
The problem is in all likelyhood caused by your drivers. Try uninstalling the mediatek drivers with USBDeview, then reinstall them.
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip