ok ppl.. I really need some help.. ill try my best to describe whats going on.. I bought my phone a couple years ago.. rooted it, install custom recovery straight out the box and never looked back... I have never updated bootloader or modem... and am currently using dlk3 as both... I wanted to clean my phone, and finally update bootloader, modem, and everything.. so I odin back to my origal stock.. android version 4.1.1 thinking I can just manually do the ota update.. but when I update it says um currently all up to date using 4.1.1 I tried using kies, but that also says im up to date....
so now im lost... I know you should do them in increments but I don't know wich order.. and I know when you get to a certain point theres no going back.. kinda why I never updated... I really want to get everything updated to the lattest version of stock.. latest bootloader and everything...
I thought the last update was 4.3.. so where did the NE4, NJ1, NJ2 come from?? wich just confused me even more?
oh, theres a 4.3ota thread.. basically said odin 4..1.1 wich I have.. then install 4.1.2, then 4.3 from a sdcard.. but my phone always had problems with sdcards.. and nowdays wont read any sdcards.. so that's not an option for me..
any information is appreciated
Is the system completely stock? Did you do a factory wipe using stock recovery after flashing 4.1.1? Did you try removing your sim card and moving the date ahead by a couple of days?
Yes.. everything is completly stock again.. including stock rocovery.. yes I did a factory reset with stock recovery after flashing 4.1.1.. yes I tried removing the sim.. and yes I did move the date ahead a few times searching for update
If you just looking to update the bootloaders and modem without going through the OTA, this may be a place to start: http://forum.xda-developers.com/showthread.php?t=2387423
Thank yoh audit13.. thats the thread I was yalking about in my OP.. that requires the use of an SDcard..
I shoukd have RMA this phone when I had a chance.. within the first year, it corrupted corrupted 3 sdcards in the forst year.. so I just stop using them.. they still read nust fine in my pc.. but now my phone wont even read them.. so im really at a loss
Sorry, I didn't notice the part about the external sd card in the thread I linked. I don't have the i747, I have the i747m and the stock 4.4.2 ROM is available for mine.
I think Kies has been replaced by smart switch.
Not sure what else to suggest other than copying the files to the internal memory and trying to flash the update that way.
i did see something about smart switch, but didn't update thinking it wasn't needed.. maybe that's my next step..
I don't see flash from internal with stock recovery.. just ADB, cache.. wich I don't know what they are.. or external.. those are my 3 options
could this be my problem? befoer odin back to stock.. I used triangle away.. used it before with success.. but I notice when im in download, flash counter says 1 and everything else says official.. I also notice when my recovery, my android guy is laying down with a red triangle..
any information is appreciated
The android laying down is fine.
With the external ad cards, are you using the phone to format the cards?
but what about the flash counter reading 1? I would still think it d/l but not install.. that I could fix if I could get that far.. lol
I use to format the sdcards in my phone.. but after a few months they become corrupt.. cards read just fine in my pc, but phone refuses to see them.. I been trying to get them to work formatted as EXfat.. NTFS is my second option
The best format I found is using a computer to format them as fat32.
The download counter is not an issue. As long as as you don't see the word "custom" in download mode, you should be fine.
You may just have to just wait and try the Ota update every few hours.
forgot about FAT32.. I do remember reading that was best...
and im running out of options, so I think your correct on the OTA
I been running TWRP and liquidsmooth 4.4.4 for ever.. and it was great.. but I wanted to run there lollipop.. but it wont boot on my phone.. I was told its because my bootloader is so old.. I also remember readin awhile back that updating bootloader can solve SDcard isuues.. but I have no clue about that..
thx for the suggestions audit.. ill make sure to thank you
Let me know how fat32 works. I am curious myself.
The latest custom Roms definitely need a kk bootloader and modem, preferably the latest nj2.
coolwhipp420 said:
forgot about FAT32.. I do remember reading that was best...
and im running out of options, so I think your correct on the OTA
I been running TWRP and liquidsmooth 4.4.4 for ever.. and it was great.. but I wanted to run there lollipop.. but it wont boot on my phone.. I was told its because my bootloader is so old.. I also remember readin awhile back that updating bootloader can solve SDcard isuues.. but I have no clue about that..
thx for the suggestions audit.. ill make sure to thank you
Click to expand...
Click to collapse
if is write to extsd , and still on KK ; this may help. :what:
https://www.dropbox.com/s/5x8qhzhzgll7ao1/KitKat Write to ext_sd FIX.zip?dl=0
not meaning to butt-in. audit13 knows his stuff. :thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
no.. fat32 no go..
and im on jellybean..
couldn't I just odin 4.1.2, then 4.3.. but im having problems finding none rooted versions.. that I would trust.. I was hoping for OTA.. all that odin makes me nervous.. to many opportunities for things to go wrong
Just to confirm, the phone is running 4.1.1? There is no Odin i747 flash for 4.1.2 as far as I know.
In order of preference, I like OTA, Odin, and then flashable zips because OTA upgrades are the safest in my opinion as long as the phone is running stock.
ATT never released a full firmware for the i747 beyond 4.1.1 which explains why it is not available on sammobile.com.
yes, I am positive everything!!! is stock 4.1.1.. it was what was on my phone when I got it.. always made sure to have a stock image on hand.. and I never messed with bootloader or modem.. and i have verified there ucdlk3
I agree on OTA being safer.. but would you suggest I do now?? I really want to get this updated... 4.1 blows coming from 4.4.. lol I could always just set it the way I had with an easy root.. but I really wanted to try lolipop
All I can suggest is flashing the bootloader and modem in tandem since you can't seem to get OTA updates.
Check out the general thread. There is one for mjb, ne4, nj1, and nj2.
Do you have to flash them incrementally? I don't know as I don't have the i747.
audit13 said:
All I can suggest is flashing the bootloader and modem in tandem since you can't seem to get OTA updates.
Check out the general thread. There is one for mjb, ne4, nj1, and nj2.
Do you have to flash them incrementally? I don't know as I don't have the i747.
Click to expand...
Click to collapse
as i understand it , you do have to flash incrementally. thats how i did mine from mj2 > ne4 > nj1. and had no problems.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Any place to download sbf files?
Sent from my ATRIX HD using XDA Free mobile app
Samsung s3 doesn't use SBF files. Is that a Motorola format?
http://www.filefactory.com/folder/b7425536f9a2526e
Related
I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
phoenix98 said:
I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
Click to expand...
Click to collapse
Is not possible for right now, until devs will create a new root app or something like superSU or I don't know ! :crying: Same to me ...
Your Boot loader is probably secured.
Try Root66 image and get back to UVDMD5 Rooted. From there, use Doc Holiday's thread to get 4.3 upgrade.
As it stands, right now if you flashed the official firmware or OTA, you will not be able to Odin flash any previous firmware. Maybe if you were never rooted....
For now though, you shoukd still be able to flash cwm/twrp and flash another rom. you will be limited to the 4.3 modem, but otherwise should be ok to run a 4.1.2 rom.
We are working on it.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
I had the same problem
I just had this same problem and was lucky enough to fix it!!!!
vTizzle said:
I just had this same problem and was lucky enough to fix it!!!!
Click to expand...
Click to collapse
How/ What did you do you fix it? I'm stuck in a rut :l
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
vTizzle said:
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
Click to expand...
Click to collapse
Hm... Interestingly enough it worked! I flashed CWM 6.3.0 though, sent me straight into stock hehe :good::good: Though I'm still curious how long until I can root it
Have you tried the auto root course??
Sent from behind you
Boot recovery, then reboot system. It should ssk if you want to root.
Better yet, flash one of our roms. Or, download the supersu zip file from chainfires thread. (Or in my sig, but its not up to date)
---------- Post added at 09:12 PM ---------- Previous post was at 09:11 PM ----------
There are several ways to root. But if you don't get rid of knox iits almost pointless.
Co-author root didn't work, and nor did Root66
I'm on the same boat
Same here,
Mine was rooted, then
I Updated to Factory 4.3
Same red letters and can't get it back,
I want to 'cause it's unstable and
it has weird partition, "emulated/0"
Any Help Please !!
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
If I did softbrick it, is there anyway to restore it?
You can try first wiping just dalvik and cache, then try factory reset.
Other ROMs
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
Thank you Doc , It has been said ..Over and over and over.. OTA 4.3 update means you cannot flash older firmware again! I was one of the lucky that waited and installed you ROM and it has been stable . I placed a few Mods like Apps For 4.3 TW
For those just refused to READ and have NOT done a OTA update to 4.3 Like DocHoliday77 and and many have said .. here goes one more time..
WARNING!!!
If you have NOT updated via the official firmware or OTA update, it is highly recommended that you do NOT do so at this time!
You can still run these roms and gain every advantage, with none of the problems!
There so many other 4.3 ROMs to play with DocHolidays, Sarahai, mrRobinson and now aamir123. . YOu just to READ before run in head first into the OTA.
I have been trying to keep up with all the 4.3 update stuff but its just so hard with 15 different threads and it being updated everyday. I stupidly updated OTA 4.3 before coming on here and reading and it blows! Samsung is stupid for releasing such a unpolished update. But besides the point, I have been having a problem with out going calls, and battery life. When I will press to call someone the call ends instantly and I have to restart phone for it to allow me to call out. Has anyone else had this problem?
Also, are we any closer to getting 4.3 rooted? I know developers are having problems with Knox etc? If not is there anything I can do to make this update better or do I just have to suck it up? Thanks for the help guys.
I alrdy talked to people at samsung and complained beyond belief, but I dont think the out sourced help desk person understood me.
I made it !!
How ?
1. Uninstall KNOX with Titanium.
2. Flash CWM twice (first one failed), Now I have CWM.
3. Download T999UVDMD5 (Deodexed)
4. Flash it via CWM.
5. Voilà !!
Now It has the partition as it comes from Factory !.
It's there a version similar to this one, running on Android 4.3 (Stock Deodexed, Without KNOX) ?
DocHoliday77 said:
You can try first wiping just dalvik and cache, then try factory reset.
Click to expand...
Click to collapse
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
bentheexo said:
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
Click to expand...
Click to collapse
If you have updated to official 4.3 by any means then don't try to downgrade your boot loader and rom as it may brick device
If you have not taken official update then it depends what is your current boot loader and what rom you are trying to flash
So if you are sure that you haven't gone for official update then you flash dmd5 firmware then try to flash rom
Be sure before doing anything
Sent from my SGH-T999 using Tapatalk
I have i747 and update is only possible through ota that's what written on official website kies is not updating my phone as it is showing 4.1.1 is the latest firmware.
Please help me how can i update my Sgh-i747 manually or any other method.
I don't wanna root my phone.. I have also downloaded leaked 4.3 ROM I747UCUEMJ2.7z and after extracting i get different files.I didn't get any .md5 or .tar file which odin recognizes. So i can't update my phone maually to 4.3 by odin
Please help me how can i update my sgh-i747.
I have official samsung firmware 4.1.1.
samoudwfr said:
I have i747 and update is only possible through ota that's what written on official website kies is not updating my phone as it is showing 4.1.1 is the latest firmware.
Please help me how can i update my Sgh-i747 manually or any other method.
I don't wanna root my phone.. I have also downloaded leaked 4.3 ROM I747UCUEMJ2.7z and after extracting i get different files.I didn't get any .md5 or .tar file which odin recognizes. So i can't update my phone maually to 4.3 by odin
Please help me how can i update my sgh-i747.
I have official samsung firmware 4.1.1.
Click to expand...
Click to collapse
The update IS possible OTA. It does not show up in KIES for some reason.
A couple of things before you do this.
Be aware that once you have the MJB bootloader that comes with the 4.3 update, you cannot go back to anything lower without bricking the phone. Plenty of articles here about it. Until someone here finds a way, it's a one way trip, and there is no stock firmware available yet to flash via Odin. I'm also not sure if you can load one of the other 4.3 versions found here without bricking it after the OTA 4.3.
Some new features are added in 4.3, and some are broken. For me, after the update, s-voice no longer works via Bluetooth, and I'm pretty sure it is an S-voice and not BT issue. Others are reporting battery life issues, constant updates, etc. Research research research. (I wish I had)
Go to settings - about device - software update and follow the prompts to get an OTA. I don't think AT&T is pushing it, but is available. Probably not a bad idea to boot to recovery first and wipe the cache before you do.
You have to be running a stock recovery for it to install and its about a 1gig download, so be on wireless and have a fully charged battery.
In my case, I had the phone rooted with a toggles mod. The update went partially and broke some things. I had to flash to an unmodded unrooted 4.1.1 via Odin to get the update to go.
I made the mistake of trying to flash MJ2 bootloader after having the MJB bootloader. It boots now with the "unbrick" sd card. Would it be possible to ODIN stock 4.1 and still boot with the SD card so it could take the 4.3 OTA again?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
RichMD said:
I made the mistake of trying to flash MJ2 bootloader after having the MJB bootloader. It boots now with the "unbrick" sd card. Would it be possible to ODIN stock 4.1 and still boot with the SD card so it could take the 4.3 OTA again?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I don't know. I've never bricked a phone. As I understand it, 4.3 BL blows e-fuses making it impossible to downgrade. If that is in fact an accurate description, then even if you were to get it to boot via SD card and installed 4.1.1, it would brick it again (double brick?)
Considering the dangers involved, I'm afraid to even sideload a different MJB 4.3 on mine.
You might just have to suck it up and send it off for a J-tag service. I've never done it, but I think others here have.
here's the link I've seen most.
http://www.ebay.com/itm/Unbrick-AT-T-SGH-I747-S3-SGH-T999-JTAG-service-I747-T999-Hard-Brick-Fix-USA-/160896407164
Sorry for your loss.
Michael503 said:
I don't know. I've never bricked a phone. As I understand it, 4.3 BL blows e-fuses making it impossible to downgrade. If that is in fact an accurate description, then even if you were to get it to boot via SD card and installed 4.1.1, it would brick it again (double brick?)
Considering the dangers involved, I'm afraid to even sideload a different MJB 4.3 on mine.
You might just have to suck it up and send it off for a J-tag service. I've never done it, but I think others here have.
here's the link I've seen most.
http://www.ebay.com/itm/Unbrick-AT-T-SGH-I747-S3-SGH-T999-JTAG-service-I747-T999-Hard-Brick-Fix-USA-/160896407164
Sorry for your loss.
Click to expand...
Click to collapse
I am trying to learn more about it but my "initial" understanding is that the "blown efuse" thing is that you can no longer boot from an earlier bootloader but it doesn't "damage" anything else. Therefore, since I already have a phone in that state but it can boot off the SD card I'm wondering if it doesn't make things worse to flash a 4.1 stock image. It would still fail to boot via EMMC but then boot off SD? Then the OTA could "possibly" happen? I doubt it is possible or someone would have posted about it but I haven't seen that you definitely CAN'T do it so I am continuing to look.
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?
Yes you can go back to 4.3 Stock.
Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.
Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk
nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.
Hey, sup?
I need your help, I'm trying to go back to stock firmware on my i747, currently I'm running CM11 latest snapshot.
Background: Some time ago, I accidently erased my imei. Took the phone to a guy who restored it but the phone doesn't work with 3G now, only 2G. So I wanted to try going back to stock firmware to see if that fixes the issue.
I tried downloading the CUEMJB file from here, but it doesn't work (keeps looping the same page) http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/
Can you help me? Also, it is safe what I'm trying to do?
Thank you!
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thank you. Yes the IMEI matches.
I was able to download the file.
Unfortunately, the thing didn't went ok. After flashing my phone is unresponsive, black screen, no more boot
If I connect it to the computer at this point, it tries to search for a QHSUSB_DLOAD driver. Not sure what is that, I think I bricked my phone.
I've seen some guides for unbricking by placing a sd card in the phone at boot but so far it haven't worked
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
dawgdoc said:
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
Click to expand...
Click to collapse
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Alright! I just tried the SD card method w/ one of the files in the threads linked. Phone boots!
So it seems my bootloader is bad right?
japi2000 said:
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Click to expand...
Click to collapse
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
dawgdoc said:
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
Click to expand...
Click to collapse
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
japi2000 said:
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
Click to expand...
Click to collapse
That is the stock recovery. If you were successfully running one of the latest CM11 snapshots, you were probably on one of the three 4.4.2 bootloaders ( and modems ), they are NE4, NJ1, and NJ2. This would explain why the MJB (4.3) image you downloaded and flashed would soft brick your phone. It looks like that flash may be responsible for you being back on stock recovery, at best guess. Before anything else, do a factory reset from the stock recovery. This is frequently necessary to boot when going from a CM/AOSP LP rom back to stock.
Since you can get to download mode, I think the best bet would be to install a custom recovery. TWRP for the i747 is here, the top image is flashable with Odin while in download mode. Remember not to reboot from Odin. Instead remove the cable, pull the battery, then boot straight to recovery. Once you have TWRP loaded, boot into recovery and use the terminal emulator in it to determine bootloader and modem with these commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
Once you know the version of bootloader and modem you had been on, reflash that version from TWRP you will probably need the file on an external sdcard to do so. After this you can flash your rom of choice from TWRP, stock or otherwise. Since you were having imei issues go with one of enewman's stock roms, as @DocHoliday77 suggested. He can then help you with the imei issues if still necessary. Any other ideas Doc?
Ok, so
Bootloader = I747UCUEMJB
I don't get anything when running getprop | grep version.baseband in the recovery.
This is what I've done so far.
Booted w/ the sdcard trick (bootloader in the sdcard).
Installed twrp
Installed the following files:
AT&T_I747UCUEMJB.zip
d2att_I747UCUEMJB_bootloader.zip
d2att_I747UCUEMJB_modem.zip
d2att_Kernel_Stock_init.d_4_3_MJB_v1.0.zip
That brought the phone to life again (w/ stock 4.3). Then I flashed CM12 from the recovery. All went ok.
Problem is, I still don't have 3G connectivity, only edge.
What would you recommend try next?
Thank you
Alright, I was able to upgrade to UCUFNJ1 for both the bootloader and baseband. Still no 3G. Ideas?
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Alright thank you
Alright, I'm happy to say that with the help of our fellow DocHoliday77 I was able to solve the issue !
Thanks everyone!
Glad you have it working.
Way to go Doc.
Damn japi2000. You did that quick good job.
Thank you!
I can't believe I went from a almost dead phone to a fully working one in only a few days, even with the 3G/4G working again !
This forum and people are amazing! Thank you!
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
samep said:
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
So, now I am on PJ1 and I don't know how to put TWRP on my phone, I want to put tx_dbs_tx's UN7 hybrid on my phone and I am having issues both finding and putting TWRP on my phone... and I can't find a download or anything for it...
I've downloaded 2 different versions of twrp and used odin to put them on but I think I am doing something wrong because it isn't booting into twrp
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Curtai said:
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Click to expand...
Click to collapse
Oh your talking about installing twrp? Yeah you have to not let it reboot. And when is done pull battery and boot into recovery to get it to stick. Obviously you figured it out. But just saying. I think earlier versions you didn't need to do that but now you do.
Glad you got it going. How you like the Rom? Running smooth for me.
ROM is good
Well I obviously got it going and didn't read the first couple posts after the install and didn't notice the SMS issue so I had that problem and I can't find a lot of the menu options that I had with the OB7 original I've been running for about 18 months... It's pretty smooth now and I'm wondering how fast it will fill up my internal memory I like that it's almost 20 gigs free.. for a while I was running on less than 6 I need to find an efficient way to use my external SD card... Other than that the options are neat but it seems really bloated all the extra Google apps make me sick even though I never use them... I've got titanium backup and am freezing them and will probably uninstall them soon... I want a small ROM that I can customize myself or apps that are easily removed or whatever half the apps I don't want are in ROM which is a pain to remove or I just don't know how to unless I use TB
Wow that's a novel sorry but yeah that's my ramblings for the next week I guess... Now I'm gonna hit the rack...