hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
hi i dont understand..ms voice command can do wt?
porkchop83 said:
hi i have this a2dp bluetooth problem ? its to do with the a2dp problem
anyway when connected with A2DP mode, all incoming call ringtone will play to the stereo headset and the phone will not ring at all, (its as though the ringtone is diverted to the phone)
but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
how do i fix this?? I want it to be connected to a2dp and yet the ringtone still ring on my dopod phone...
Click to expand...
Click to collapse
Under Windows Mobile 5 it worked but not under 6. Under WM5, all phone rings would come thru the external speaker (I liked this) and music thru the A2DP headset. Now under WM6, I get rings and music thru the headset. No phone ring externally. I hate this as I miss calls all the time because the earbuds are not always in my ears. I plan to search for some reg settings tonight (on my own). Anyone had any luck with changing this behavior?
jathomas0910 said:
I havent found away to fix this but every windows phone i have used will route all sound to the head set when using a2dp, but the intresting thing is that when i installed microsoft voice command it would play through the loud speaker
Click to expand...
Click to collapse
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
species8472_rules said:
Thanks.. Your comments helped to solve my issue.. I always want all audio routed to headset except for "Phone Ring". I want the phone to ring externally because I do not always have my earbuds in my ears therefore I miss calls. On all Faria WM5 roms, the phone would ring on the external speaker but under all WM6 roms (had not used Faria's yet; I am using 3G's) ALL audio is routed to headset including phone ring. It appears the reason Faria's ROM would ring externally is because Voice Command is cooked into the rom and voice command will rout rings externally because of voice notification (even though voice notification does not work in 1.6). I installed Voice Command 1.6 last night and the Phone now rings externally with all other audio routed to my A2DP headset. Been at this for weeks trying to figure out the behavior. I am now completely happy. I have a very stable WM6 ROM and A2DP that behaves the way I want.
L8
Click to expand...
Click to collapse
Suppose I should have provided an update.. It only works on the first phone call after powering on the headset. Once I accept a call via the headset, it nevers rings externally again..
I have a Samung BT earpiece HM 1500. When I receive a call, the voice of the caller comes out of the earpiece & the phone simultaneously, & ofcourse it'd be so low on both. I then disable BT on the dialer & re-enable it, then the voice comes out of the earpiece only & in great quality. The same thing happens when I connect the phone to my car BT set aswell, so the issue is related to the phone & not the BT sets.
Any solution to this ?
Ok....so it is video caller id that was doing the mess....removed it.....everything back to normal
Just finished the flash to [Official][4.4+]CandyKat Rom[2/5/14] rom and I'm loving it. Everything checks out except for the sound when making calls or receiving calls. Device audio works when not in a call, speaker works when not in a call, all other audio works when not in a call. While in a call you can't hear anyone on the other line and they can't hear you. It's the same for speaker, wired headset, bt headset, and of course the handset speaker. I've tried installing SoundAbout to see if simply rerouting the sound would fix it, but that didn't work. Tried a soft reset and then a hard reset and that didn't work. Any ideas?
UPDATE: Took a bit more searching (I was using the wrong keywords) but I found the solution. If anyone else runs into the problem, the solution I found is Here
Sorry for the unnecessary thread.
I recently bought a BT car speakerphone and tried to place a call using my Xperia ZL (on 4.2.2). The call goes thru but I cannot hear anything from the speaker. I can hear sound if I play music but nothing if I make a phone call. I checked with my wife’s ZL (on 4.3) and the BT speaker works fine.
I tried my phone with another BT speaker and still no go for voice calls. Music is fine though. I believe there is an issue with the phone calls over the BT connection.
Anybody else experienced this issue? Any possible fix? I hate to send it back to Sony. Thanks
Hello Guys!
So, I am using AEX 5.2 and from what I have noticed, the phone's mic doesn't work in speaker mode. During calls and WhatsApp video calls, the party on the other side doesn't receive my voice.
It works fine with the earpiece for both normal calls and Whatsapp voice calls. I believe the secondary microphone is gone.
So I was wondering if there's any way of disabling the second mic during calls and force the phone to use the bottom mic?
I have seen some people with LG G5s having the same problem and they solved it by editing the mixer_paths_tasha.xml file (don't quote me on the exact name of the file) But I didn't find anything with that name on my phone.
Any guidance here? Please. Or am I missing something here? I really hope this is a software problem but unfortunately, the same problem remained in the safe mode.
Audio mods I have installed- Viper, Sauron, DualShox
stock kernel
Thanks in advance.