Stuck at 3rd pairing screen (see image) after numerous factory reset and can't pair with phone, although phone says it is paired but watch won't go beyond this pairing screen! Tried everything (uninstall - clear cache, data, re-install android wear, unpair bluetooth ), but no progress. Any advice? thanks!
Have you found a solution for this issue? Im having the same issue
Related
Hi
My fire tv updated today and now, from within the FTV menu > apps, all I see is a bunch of app icons rather than the amazon app library carousel. From here I can open my sideloaded apps but not the amazon apps. When I try to open these I get 'An error occurred trying to authenticate your account'. Everything else works fine. Amazon customer care say to factory reset. Restoring a backup with adb unfortunately fails as does installing apps over adb. Has anyone come across this ?
I've tried the usual:
force stop, clear data, clear cache, cold restarts, warm restarts,
I've also tried:
switching on/off adb and usb debuging, deregistering and registering.
Any ideas?
Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
jpmuri said:
Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
Click to expand...
Click to collapse
Your best bet is to post this question within one of the following threads.
http://forum.xda-developers.com/showthread.php?t=3672940
http://forum.xda-developers.com/showthread.php?t=3669431
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Lineage OS 7.1.2 setup wizard crash
After a number of wipes, restarts, permission changes (all failed) I solved the problem by simply updating the ROM in the system settings menu. Go figure....
...and FACTORY RESET fails
Hi all,
We have a gen 1 firestick - I did have Kodi installed but NO ADDONS we just used it as for playing home media and photos from the NAS etc. so just Kodi ITV player, youtube via firefox, etc etc. Amazon Prime...
All was fine until a few days ago when I noticed things not working right. It failed to install an ITV hub download and Kodi stopped.
When trying to install an app, it said downloading and then came up with an error such as this:
best picture hosting
It's been installed a while so I thought I would factory reset it.
I did the reset through the menus. It had the reset message on screen for a few minutes then went to black screen. So after 1/2 hour I cycled the power. The white amazon logo came up and then I get the account login screen after 5-10 minutes. I have to then pair the remote - but this won't work unless I take the (brand new duracell) batteries out of the remote for 10s then hold home to force the pair.
The firestick then automatically logs in to my router (though I haven't given any passwords etc.)
I set up the account as normal and I can use BBC iPlayer for example and all seems fine but any app I try and install just fails to install - it gets to the 'downloading icon' then says that the download failed.
If I cycle the power it goes back to the 10 mins white logo and setting up the account all over again.
I tried a second network and a different amazon account and it's the same.
Tried lots of factory resets but always the same outcome.
I do notice that the stick reports 3.19GB of memory used !
I suspect that somehow some files are corrupted on the stick and something is stopping it from doing a proper factory reset so I thought (from reflashing phones in the past) I would try and boot into recovery and try and to a reset from there instead.
I can adb to it,
I managed to boot to recovery but it just gives me a load of this failed and that failed messages at the bottom of the screen.
Any suggestions of how I could force a proper reset or what might be going on would be very gratefully received.
Thanks in advance ?
Hello all,
After finally updating my PX5 to the latest MCU and firmware (according to Hall9k) using his mod application, I am now experiencing low volume on everything (radio on max is pretty low volume when you're on the highway) and bluetooth settings always reset to empty settings and will not find my phone and my phone will not find the PX5.
I've tried resetting wifi and bluetooth settings, no luck. I've tried resetting the unit back to factory settings, erasing all data, no luck. I found a post regarding the bt issue and followed all his steps (changing the bt device and reverting back to it, etc.) but no luck. I found a post which said the device somehow needed to be an other one than previously set, so I've tried all the devices in the list, but no luck. Only at the parrot device, the bt settings were automatically reverted back to factory default (Car... something), but it wouldn't connect. Normally my device was on SD-968 I believe (not currently in my car).
So, that's my main issue now. How can I get BT to connect, without rolling back to Android 6.0.1? Because on 6 it worked.
And second, how can I get the volume louder? Again, after updating the volume somehow seems limited.
I don't want to go back to 6, if there's an other way, because 6 had its own problems...
I'm really lost here and have spend many hours in the car, trying everything I could find online (even manually clearing cash and storage of the bt settings, etc). There must be a way this should be fixed.
My Android 9 fw is from November (Hal9k send that one to me)
My MCU is MTCE_GS_V3.17bd_3
Hello,
I have a Philips 50PFL5766/F7. If I go into settings and select reset (there is no physical reset button on this unit), it doesn't actually reset the tv. Once it reboots, the personal Google account is still there. The TV doesn't boot into Android TV at all, only to an HDMI source. The TV attempts to process a Google update (989MB) on startup but it seems the file is too big or it's corrupted and fails to complete. I've tried deleting individual apps to make room to process the update but on reboot, they reappear. It's as though the OS and data are locked and read-only.
Any help or insight would be greatly appreciated!