Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
jpmuri said:
Hey everyone, I unbricked my moto g4 this morning, after replacing a corrupted sd card. I installed lineage os 15.0 and micro gapps for android oreo, however, when I booted I received a black screen and a notification that the setup wizard had stopped. this notification was looped so when I clicked close app, it would pop up again. I booted into factory mode, disabled the setup wizard and moved past that problem only to face another one: When I received phone calls, i would get an "advanced settings has stopped" and go into a forced factory reset. after a little experimentation, the phone did not reset every time I received a call, and I stopped receiving the advanced settings error after turning advanced settings off. In an attempt to fix the problems that just kept popping up, i tried another factory reset, but now I'm receiving the same problem I first had: a black screen and the set up wizard has stopped notification, except now, I can't boot into factory mode and solve it. Is this a common problem with an easy solution? or can somebody help me out? I have twrp and bootloader mode, but that's all i can access from my phone right now.
Click to expand...
Click to collapse
Your best bet is to post this question within one of the following threads.
http://forum.xda-developers.com/showthread.php?t=3672940
http://forum.xda-developers.com/showthread.php?t=3669431
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Lineage OS 7.1.2 setup wizard crash
After a number of wipes, restarts, permission changes (all failed) I solved the problem by simply updating the ROM in the system settings menu. Go figure....
Related
Hi there
It all started once I accepted Android 6 load from T-Mobile.
After the update, I started to get an error message when I was trying to open settings.
I did hard reset to get back to factory settings, but guess what? Now I am getting this pop-up when phone boots, so I am not able to use the phone at all anymore.
USB mode is not set after reset, so I can NOT connect phone to pc to try to manage it....
Anything I can do in that situation?
Thanks!
I cannot attach a picture, so if you want to check it, see the post on another forum I did yesterday....
go to androidforumsDOTcom and search for "infinite pop-ups on phone reboot" on it....
Hi there
It all started once I accepted Android 6 load from T-Mobile.
After the update, I started to get an error message when I was trying to open settings.
I did hard reset to get back to factory settings, but guess what? Now I am getting this pop-up when phone boots, so I am not able to use the phone at all anymore.
USB mode is not set after reset, so I can NOT connect phone to pc to try to manage it....
Anything I can do in that situation?
Thanks!
I cannot attach a picture, so if you want to check it, see the post on another forum I did yesterday....
go to androidforumsDOTcom and search for "infinite pop-ups on phone reboot" on it....
HTC one m9
Andriod system update...
phone boots straight away message box appears "system ui has stopped unexpectedly. would you like to send an error report to htc...."
Press either options send or don't send phone then flickers between an almost "scenery photo"
I cant enter my passcode to access data via pc
Already tried deleting cache but no changes
I think my next option is to factory reset but i need my data off before...
is there a way? please help
Is tour phone rooted? If it is try to dirty flash your rom again
Hi,
I have stock Marshmallow on my LG G4 and it somehow just stopped responding. At the startup there is an "android.com.phone stopped working" popup. After clicking OK, it dissapears and the phone doesn't respond for any unlocking attempts. After triple tap, the "magnifying lense" works and thats basically it. Before performing a factory reset I would like to get my data(photos, videos, possibly messages) backed up. But after connecting USB cable it is connected with "Loading only" option. I can't change it to mass storage or MTP. The phone works in background, I can see once in a while new notifications about updating apps etc. I tried using Safety Mode, same things happen.
Is there a way to change USB option remotely or perform a reset without losing all data? Since I never used USB debugging on this phone, I assume it is disabled.
Thanks for any help.
Looter11 said:
Hi,
I have stock Marshmallow on my LG G4 and it somehow just stopped responding. At the startup there is an "android.com.phone stopped working" popup. After clicking OK, it dissapears and the phone doesn't respond for any unlocking attempts. After triple tap, the "magnifying lense" works and thats basically it. Before performing a factory reset I would like to get my data(photos, videos, possibly messages) backed up. But after connecting USB cable it is connected with "Loading only" option. I can't change it to mass storage or MTP. The phone works in background, I can see once in a while new notifications about updating apps etc. I tried using Safety Mode, same things happen.
Is there a way to change USB option remotely or perform a reset without losing all data? Since I never used USB debugging on this phone, I assume it is disabled.
Thanks for any help.
Click to expand...
Click to collapse
Check out steadfasterX's thread: [TUTORIAL][LOCKED][UNLOCKED][ANY G4] DLM Backup - Full backup within download mode! at https://forum.xda-developers.com/g4/help/tutorial-backup-download-mode-t3659223
Read the OP thoroughly and post any questions there for help. He has proven very helpful to a lot of members.
Note: it is more informative and helpful when you post your model # and the exact kdz version you've got installed when seeking help.
Hi,
I'm running a current Stock-ROM on my OP3, as provided by OnePlus OTA, never flashed something else. Just using the phone out of the box.
Yesterday, I deleted some cache data to free some space on my 99% filled up phone. Then I opened the gallery but not all thumbnails appeared and then it stucked completely. I holded the power button and it switched off. Now when turning the phone on a message appeared saying:
"The dm-verity is not started in enforcing mode"
After a few seconds it changes to the 3 animated points and this never ends. All I can do is switching it off, starting recovery mode or fast mode again with the same behaviour. I tried to connect it with my PC (W10) but it is not showing up.
How can I fix this problem without loosing my data especially my pictures and personal folders. How can I backup my data? I can still see them in recovery mode but how to access them and copy them? I could live with resetting the phone losing all settings and apps, but not my files.
What is your suggestion? Thanks in advance.
Ok, I just tapped on "Reset system setting", lost all apps and settings but it starts again and all my files are still there. Problem solved.