infinite pop-ups on phone reboot - T-Mobile LG G3

Hi there
It all started once I accepted Android 6 load from T-Mobile.
After the update, I started to get an error message when I was trying to open settings.
I did hard reset to get back to factory settings, but guess what? Now I am getting this pop-up when phone boots, so I am not able to use the phone at all anymore.
USB mode is not set after reset, so I can NOT connect phone to pc to try to manage it....
Anything I can do in that situation?
Thanks!
I cannot attach a picture, so if you want to check it, see the post on another forum I did yesterday....
go to androidforumsDOTcom and search for "infinite pop-ups on phone reboot" on it....

Related

Chrome to Phone

Hi, after installing a custom Rom ( leeDroid, its the nuts !!), I cant get ' Chrome to Phone ' to work anymore, any help please. My pc says its been sent to phone, but I dont receive it.
Thanks.
have you lunched chrometophone on the phone yet and set up the account again?
Yes, have tried un-installing from phone, and re-installing. My browser says it had been sent to phone but I don't receive it.
Just to repeat TheGhost1233's response to your question:
You've installed Chrome To Phone on your device. But have you launched it and gone through the brief setup process on your device?
Yes, it did work, my phone tells me it's set up, I ticked the box ' launch links automatically ', but nothing happens.

[Q] Problem with Galaxy Tab 7'' update

Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Try resetting it back to factory defaults. You can google it easily.
hypnonaut said:
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Click to expand...
Click to collapse
my friend has the same problem. did you fix the issue? if so how?
I am using the Apex Launcher but I think this is possible with stock launcher as well hopefully it helps someone. This is one way to do a factory reset is:
You will need your MSL TO DO THIS. If you don't know it put the "Factory Mode" shortcut on your home screen then skip down to the 2nd part of this post & install the msl app.
FACTORY RESET:
1) long click on the home screen
2) click on shortcut
3) select Activities
4)Scroll down to "Factory Mode" tap it then select the dropled down one. This will put a Shortcut on the Home Screen.
5) Find the Factory Mode shortcut you just made & tap it to open it.
6) Dial ##786# then on the screen that pops up
7) select "RESET"
8)enter your msl in the box that popped up then select ok then the device will reboot & when it powers backup it will be like it was from the factory & if you don't know your MSL follow the instructions below.
TO GET MSL:
1) In a browser type bit.ly/mslutility - can sideload if needed
2)install app
3) Open app & click get MSL it will most likely fail this is fine.
4) click on the factory mode shortcut you made to open it
5) dial ##3282# & put in 6 zeros-it will tell you that it's incorrect this is fine. Go back to home screen
6) Open the MSL App & click on Get MSL-this time it should give you your devices 6 digit MSL Code. Write it down. Then do step # 6 above to reset your Device.
This shortcut will allow you to put the Sprint SGT3 into DIAG MODE(##3424#) , get into the ##data#(##3282#) menu, do the factory reset ##RTN# (##786#) & most likely any other Dialer/hidden menu's for this device.
Thanks to the MSL App builder(not sure who it is so let me know please)
Sent from my SGT3 SM-T217S using Tapatalk 4 I Flashed 2 Selectel
What is it trying to update to? 4.2.2?
Levi Woodard
Woodardwoodworks.com
Sent from the XDA premium app.

infinite pop-ups on phone reboot

Hi there
It all started once I accepted Android 6 load from T-Mobile.
After the update, I started to get an error message when I was trying to open settings.
I did hard reset to get back to factory settings, but guess what? Now I am getting this pop-up when phone boots, so I am not able to use the phone at all anymore.
USB mode is not set after reset, so I can NOT connect phone to pc to try to manage it....
Anything I can do in that situation?
Thanks!
I cannot attach a picture, so if you want to check it, see the post on another forum I did yesterday....
go to androidforumsDOTcom and search for "infinite pop-ups on phone reboot" on it....

after update - systemUI stopped - how to get data off

HTC one m9
Andriod system update...
phone boots straight away message box appears "system ui has stopped unexpectedly. would you like to send an error report to htc...."
Press either options send or don't send phone then flickers between an almost "scenery photo"
I cant enter my passcode to access data via pc
Already tried deleting cache but no changes
I think my next option is to factory reset but i need my data off before...
is there a way? please help
Is tour phone rooted? If it is try to dirty flash your rom again

Phone is starting stuck

How i get this problem:
It started when i can't open my phone because Gboard keeps stopping after i update it! I can't even use my fingerprints. I remember that i can remove the lock via Recovery, so i delete locksetting.db and reboot system. The lock is gone and i can open my phone but the launcher won't shows up, it said "Phone is starting". Help fix this please! Thanks

Categories

Resources