Develop Bugs

Cant boot phone bricked.

So i basically ended up delting boot partition or something.My Lg g3 wont turn on now.I was trying to fix Boot verfication but ended into more of a mess.It wont go to download mode ( pluging Usb cable and presing Up button).My phone is recognised by my pc when i connect it.Previously i had rooted it.Start of all this mess was while trying to install a custom recover Twrp.Any fixes now or i goota get a Jtag.

http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read page entirely

Thanks TheMadScientist420 for reply but I did not understand a thing plus link to tool is also not working.
Lemme say it again phone won't turn on go to download mode or recovery.

You cannlook the tool up straight on google its out there im at work now so i not near my comp or i could walk u through further down the page it talks about disasambling the mother bord slightly kinda like jtag just not soldiering what ure doing is resetting the. Boot partitions to a factory blank state then ure using ure restore tot file and extraction stock partitions and pushing them to previously stated blank partitions on phone
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
It took me like 5 or 6 tries to short the pins out to do it

What exactly is the tools name btw? one i found requires me to pay to unzip it.
its on androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/

http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Bout half way down are the files u need

I got lg g3 D855 BTW thanks.

babapera said:
I got lg g3 D855 BTW thanks.
Click to expand...
Click to collapse
Could you fix your problem?

re
Sidz4u said:
Could you fix your problem?
Click to expand...
Click to collapse
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.

babapera said:
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.
Click to expand...
Click to collapse
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?

You have to force it into the qualcom port with the pin shorting guide
---------- Post added at 01:10 PM ---------- Previous post was at 12:40 PM ----------
Again i stand corrected the g2 bad a ms dos script that pushed the partitions on the g3 wilzcracker aparntly pushes them so just follow the guide it works

Sidz4u said:
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?
Click to expand...
Click to collapse
Not really

On your pc goto device manager youll see comms and ports thats wher youll see lg or qusb bulk 9008

my phones back online thanks mate. its working again

babapera said:
my phones back online thanks mate. its working again
Click to expand...
Click to collapse
what all did u do ??

just follow the guide
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

i followed the link but confused with their description on the pin shorting ..[.i cant find the specific pins to short.... please how did u short it......and which pins did u short

A small wire and you have to diasmble to get to the shorting point

TheMadScientist420 said:
A small wire and you have to diasmble to get to the shorting point
Click to expand...
Click to collapse
I am in India.. and we don't have .tot here. We use .kdz
Last I was on v21a.. fulmics rom.
Where should I get the tot files from ?

U can use kdz. http://forum.xda-developers.com/showthread.php?t=2785089

LG G4 H815 - Stuck on Bootloader State

Hi to all,
yesterday I attempted to install LineageOS on my LG G4 h815.
I followed this tutorial -> https://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003
Everything went fine. I was able to boot under LineageOS reinstall my apps etc, etc.
This morning when I woke up everything seemed normal too. But, few minutes ago, I sent an SMS via Google Messages the phone froze and then black screen.
When it froze I had 97% battery.
Ï tried to reboot it with power button -> Nothing.
I tried to remove the battery put it back on and pressed the power button -> One tiny vibration but nothing
I tried several times the same last process and finally I managed to get the screen with "Bootloader state : Unlocked !", but I cannot go further.
If I connect the phone with a USB cable, wether he's "turned on" or turned off no led is blinking.
Does someone have a clue to fix this or has ever encountered this issue ?
Tanks in advance and do not hesitate to refer to an old post. I wil check (but found no same case).
Jérémie.

Monkeypox95 said:
Hi to all,
yesterday I attempted to install LineageOS on my LG G4 h815.
I followed this tutorial -> https://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003
Everything went fine. I was able to boot under LineageOS reinstall my apps etc, etc.
This morning when I woke up everything seemed normal too. But, few minutes ago, I sent an SMS via Google Messages the phone froze and then black screen.
When it froze I had 97% battery.
Ï tried to reboot it with power button -> Nothing.
I tried to remove the battery put it back on and pressed the power button -> One tiny vibration but nothing
I tried several times the same last process and finally I managed to get the screen with "Bootloader state : Unlocked !", but I cannot go further.
If I connect the phone with a USB cable, wether he's "turned on" or turned off no led is blinking.
Does someone have a clue to fix this or has ever encountered this issue ?
Tanks in advance and do not hesitate to refer to an old post. I wil check (but found no same case).
Jérémie.
Click to expand...
Click to collapse
Take note of what version of recovery you have you at need to try a few different versions or your device has the dreded boot loop issue........
---------- Post added at 10:38 AM ---------- Previous post was at 10:22 AM ----------
stinka318 said:
Take note of what version of recovery you have you at need to try a few different versions or your device has the dreded boot loop issue........
Click to expand...
Click to collapse
This at help to........
https://forum.xda-developers.com/g4/help/installing-twrp-issue-t3606772

stinka318 said:
Take note of what version of recovery you have you at need to try a few different versions or your device has the dreded boot loop issue........
---------- Post added at 10:38 AM ---------- Previous post was at 10:22 AM ----------
This at help to........
https://forum.xda-developers.com/g4/help/installing-twrp-issue-t3606772
Click to expand...
Click to collapse
Not sure to understand but how can I try different versions of TWRP if I can't get to Recovery mode ?

Monkeypox95 said:
Not sure to understand but how can I try different versions of TWRP if I can't get to Recovery mode ?
Click to expand...
Click to collapse
What version did you flash.......

stinka318 said:
What version did you flash.......
Click to expand...
Click to collapse
I flashed this img twrp-3.0.2-1-h815.img

Monkeypox95 said:
I flashed this img twrp-3.0.2-1-h815.img
Click to expand...
Click to collapse
Is there another version that you can try found on Samsung device sometimes flashing a older version may work.....

stinka318 said:
Is there another version that you can try found on Samsung device sometimes flashing a older version may work.....
Click to expand...
Click to collapse
I really would like to try another version but how ? I can't even get to recovery mode... I'm stuck on the first LG logo.

Monkeypox95 said:
I really would like to try another version but how ? I can't even get to recovery mode... I'm stuck on the first LG logo.
Click to expand...
Click to collapse
If you can get it in to download mode use you laptop to flash recovery this is probably why it has failed.......remember Google s your friend.

stinka318 said:
If you can get it in to download mode use you laptop to flash recovery this is probably why it has failed.......remember Google s your friend.
Click to expand...
Click to collapse
Just to perfectly understand.
Are you advising me to flash my recovery with an older version via my laptop (I imagine via adb/fastboot) despite I can't even get my LG be recognized by my laptop ?
Will the adb/fastboot command be functional as the LG seems not to be recognized on the PC?

Monkeypox95 said:
Just to perfectly understand.
Are you advising me to flash my recovery with an older version via my laptop (I imagine via adb/fastboot) despite I can't even get my LG be recognized by my laptop ?
Will the adb/fastboot command be functional as the LG seems not to be recognized on the PC?
Click to expand...
Click to collapse
The best way to get your laptop I recognize your phone is to get LG up running then with the usb plugged n drop the battery out then put battery back in then close off LG up.
Then start it again and when it go's into download mode the pull usb and close off LG up Then plug it back in with dos prompt open............

stinka318 said:
The best way to get your laptop I recognize your phone is to get LG up running then with the usb plugged n drop the battery out then put battery back in then close off LG up.
Then start it again and when it go's into download mode the pull usb and close off LG up Then plug it back in with dos prompt open............
Click to expand...
Click to collapse
Thanks for your reply and your time. I didn't know this software "LG Up", I will give it a try this evening (in France ^^') and give you feedback then.

Monkeypox95 said:
Thanks for your reply and your time. I didn't know this software "LG Up", I will give it a try this evening (in France ^^') and give you feedback then.
Click to expand...
Click to collapse
LG UP had no effect on the phone.
However, now the phone seems to have 0% battery and when I try to boot it I get the graphics to plug the phone on a source of energy. Once I do that the front led is blinking in orange (I guess because I had less than 1 or 2% o battery) and now the front led is still lit on in orange. Is this a good news or I'm hoping for nothing.
Anyway tomorrow I will try to get it back to my retailer.
Does anyone succedeed to get it replaced by LG even if the bootloader is unlocked ?
Thanks.

After a little journey to the repair shop of my retailer everything seems to work correctly, for the moment, with LineageOS !
Thanks everyone for your help !

Zuk Z2 Plus stuck at EDL - 9008 port & Not booting [SOLVED]

PROBLEM : Lenovo Zuk Z2 is stuck at EDL mode and cannot boot back into system.
DON'T PANIC...
A bit more about it
Zuk Z2 Plus is kind of bricked at Edl mode i.e it is at 9008 , aye.
A bit wierd issue but yes, it suddenly went to EDL and after a dozen tries like Vol & Power button holding and stuff i am not able to get out of edl mode.
There is no LED blinking, no vibration, display won't turn on, no nothing - just dead and is at EDL mode.
I've flashed 1.9 ROM & 2.0 ZUI ROM via QFIL ( as my Zuk is bricked or stuck at EDL mode i can easily flash ) but these don't boot too, or flashed ZUI via MI Flash Tool, but same.
It stays at EDL MODE.
Just for the record, I have bricked z2 a couple of times and after some hard work to get that to 9008 from 900e was able to unbrick it after I was able to get it to EDL mode and do deep flash ... but now in this case I am stuck at EDL. OMG
Device automatically switched to edl..
After searching on the internet!
After searching a lot, i found that same issue has happened in other devices also, possible fix is let the battery drain (will take a long time ) and after that plug in charger as it will turn off edl or disassemble it and disconnect battery ( harmful way)
How I fixed it? / SOLUTION
I let the battery drain to 0% and after that I plugged in the charger and pressed power button for 5 seconds and Viola it booted.
Now, the question is I was able to drain the battery just in a day, what I did is 2 things:
1. Used OTG cable and connected it to another device for 4-5 hours[ - to charge that another device in hope to drain my Z2 Plus's battery.
2. I used a thread or a rubber elastic band and tied that to the phone with a small paper roll pressing the power button and kept it like that for about 5 hours ( at this stage phone keeps on rebooting into edl so drains battery but you will not get to know it as no response will be shown by it - expect the sound it comes if you have it connected with the PC.)
------ Other Methods which seen to work ------
Or another method is Service Center, you can easily lock bootloader by flashing QPST STOCK ROM as you are at EDL - 9008 port.
Or removing the battery and connect it, it will switch off EDL - for this go to Local Shop I don't recommend doing this at home
THANKS - HOPE IT WILL HELP YOU

EDIT : FIXED!!
PS: Don't quote the Whole Post

Try a deep flash

May be it can help you
Mod Edit: attachment showing external link removed

JIT05 said:
May be it can help you
Click to expand...
Click to collapse
May i know which is this platform?

Telegram

SOLVED THE ISSUE - FINALLY and updated the thread with SOLUTION.
JIT05 said:
May be it can help you
Click to expand...
Click to collapse
I fixed it, if you see I only posted that xD
Not_James_Bond said:
May i know which is this platform?
Click to expand...
Click to collapse
That is Telegram, one of the chat app for interacting with communities....
For example like this :
Mod Edit: External link removed
Mod Edit: Attachment with link to external group removed

Anybody who has similar issue, regardless of device would be benefited. [emoji111]️ Good Job
Sent from my Z2 Plus using Tapatalk

heerakjyotidas94 said:
Anybody who has similar issue, regardless of device would be benefited. [emoji111]️ Good Job
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Yeah.

JIT05 said:
Telegram
Click to expand...
Click to collapse
kubersharma said:
SOLVED THE ISSUE - FINALLY and updated the thread with SOLUTION.
I fixed it, if you see I only posted that xD
That is Telegram, one of the chat app for interacting with communities....
For example like this :
Mod Edit: removed external link
Click to expand...
Click to collapse
Thank You.

Just Sharing Only Group For Discussion , Not Sharing Anything Related To Piracy [emoji4]
Mod Edit: external link removed

Thread closed, Xda being used to drive traffic to off-site group not permitted.

Hard bricked and Solved.

First things first, NEVER RESTORE A TWRP BACKUP YOU CREATED IN ONE VERSION IN ANOTHER VERSION.
Now coming to my situation, I installed the Deodexed Stable Zui Oreo ROM but as usual got bored with the zui and wanted to go back to my fav Pixel experience Rom so I clean flashed it from the unofficial hendibudi recovery but I couldn't use my internal storage and I once earlier read in another thread that installing 3.0.3 decrypts it so I installed that recovery and clean flashed AEX5.2 Rom this time and same internal storage problem continued so my lazy ass thought I'll restore the TWRP backup I created when I unlocked the bootloader instead of flashing through qfil and that was my mistake.
I created the backup on 3.1.0 but now I was on 3.0.3 so as soon as I restored the backup and rebooted, my phone didn't turn on, no zuk logo or led or anything, if I long press the power button it just vibrates and the led flashes for a sec, that's all.
Edit: feels like this thread belongs to the News/Discussions section than here but meh
Edit2: Solution in Post #4

It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.

narshi shukla said:
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
Click to expand...
Click to collapse
well if it's that easy I wouldn't be worried at all but unfortunately my situation is a bit different, I can't flash anything as my phone is recognized as 900E, to flash anything the phone should be recognized in 9008(edl) mode and for that I have to strip the cable and short circuit with it and all that, which is really a hit or miss kinda situation so kinda worried!
But seems like I have no other choice so let's see what happens, I tried stripping the stock usb cable and it got split into half lmao
now I'll buy another cable and will try the copper wire method instead of splitting it
Edit: yeah ik that different versions of TWRP are different but I wanted to restore only the data partition and my data was already encrypted so I thought I have nothing to lose, I was like if it doesn't work I'll flash the full firmware again but didn't expect it to fully brick the phone

Okay the primary reason for me creating this thread was to let y'all know how I bricked my device so that y'all won't repeat my mistake but I saw some people here and there recently asking how to resurrect their device so thought I'll share how I got mine working wishing it'll help such people.
My phone was completely dead, the hardware buttons weren't doing anything, the phone doesn't power off but all I could see was a black screen, so I had to follow THIS GUIDE.
But the above situation is a rarity, I guess most of you ppl could get to the zuk logo or your led keeps flashing and you can use your hardware buttons, in such situations, follow THIS GUIDE.
The above links are for you to get your phone to 9008 mode to be able to flash the stock firmware, but if you don't know how to flash,
refer THIS GUIDE.

Flashing problem
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".

seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution

sidS6 said:
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
Click to expand...
Click to collapse
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.

seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Not 2 minutes but i think 30 seconds at max.. and by successful i mean that you get into Qualcomm 9008 qdloader mode in qfil
---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ----------
The main thing is you have to immediately press the download button(within 2-3 seconds) after reconnecting into 9008 mode

Briked my phone flasing oos, solved it in the first go usimg qpst method.

Rahil4321 said:
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Click to expand...
Click to collapse
You didn't got Sahara error?

seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Were u able to unbrick?

Thanks
sidS6 said:
Were u able to unbrick?
Click to expand...
Click to collapse
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.

seetharam55555 said:
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
Click to expand...
Click to collapse
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs

seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
dude just cut the cable and make intersection betwwen vlack and gree wire and put the cable into phone , got edl mode simple ways

sidS6 said:
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
Click to expand...
Click to collapse
Why did you wasted 3 cables for?

seetharam55555 said:
Why did you wasted 3 cables for?
Click to expand...
Click to collapse
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one

sidS6 said:
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
Click to expand...
Click to collapse
Ohh you tried that method i did like this

sidS6 said:
You didn't got Sahara error?
Click to expand...
Click to collapse
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all

Nirmal0001 said:
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Click to expand...
Click to collapse
Unfortunately learnt this after unbricking my device

I had installed RR mix rom in my Zuk Z2 plus. while trying to enter fastboot mode, it went off. Now it is completely dead. not being recoganized in my PC.In device manager it is not shown. Tried to deep flash through Qfil, but didn't recoganize port.If i plug in charger also no LED indication, If I disconnect battery & plug in for charging, white LED slowly blinks, in the same mode if I connect charger blinking white LED continues. But once I remove charge & reconnect it shows nothing. again if I remove battery & reconnect, again white LED starts blinking. Apart from this nothing is shown, phone completely dead. Can anybody help please. I tried through Qfil, tried by shorting black & green cable, all types of key combinations.

Redmi Note 5 Pro dead, no fastboot, no recovery, no led

Hi all,
after waiting 15 days, I have unlocked the bootloader, flashed twrp, firmware and rom, then rebooted.
the phone is dead ever since.
I can see it in device manager as "Qualcomm HS-USB QDLoader 9008 (COM10)", but I am not able to flash a rom through miflash.
any help is welcome
*additional informations*
here are the steps i followed:
1) unlocked bootloader succesfully
2) flashed official twrp
3) wiped EVERYTHING except sd ext
4) flashed this firmware
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
5) flashed this rom
https://forum.xda-developers.com/re...ment/ota-resurrection-remix-os-6-0-0-t3777375
6) rebooted, dead
I noticed now that if i try to turn on the phone, the led blinks a few times
PROBLEM SOLVED:
the phone is alive again. Here is what I have done-
1) I opened the phone and tried the test point method, but I noticed that nothing changed in the way the phone was detected by my laptop. So, it's not crucial have "COM 7" in device manager.
Then I basically followed the steps suggested by @Destrangis in post #3
2- In MiFlash Choose CLEAN ALL and install this rom: http://bigota.d.miui.com/V9.2.7.0.NE...179eb04f38.tgz
3- Installed TWRP, WIPES and flash https://androidfilehost.com/?fid=5862345805528041092 and Magisk
4- Come back TWRP, WIPES and install your favorite rom.
Click to expand...
Click to collapse

lomax84 said:
Hi all,
after waiting 15 days, I have unlocked the bootloader, flashed twrp, firmware and rom, then rebooted.
the phone is dead ever since.
I can see it in device manager as "Qualcomm HS-USB QDLoader 9008 (COM10)", but I am not able to flash a rom through miflash.
any help is welcome
Click to expand...
Click to collapse
EDL booting and flashing is your solution.
Now, only debatable is will you use EDL booting procedure which requires opening of the phone to short two contacts to be able to boot in EDL or You will use altered ADB which gives possibility to boot in EDL without case opening. This second option is somehow questionable but first, i think, if second option to enter EDL without opening is way to go!
---------- Post added at 07:37 PM ---------- Previous post was at 07:03 PM ----------
lomax84 said:
Hi all,
after waiting 15 days, I have unlocked the bootloader, flashed twrp, firmware and rom, then rebooted.
the phone is dead ever since.
I can see it in device manager as "Qualcomm HS-USB QDLoader 9008 (COM10)", but I am not able to flash a rom through miflash.
any help is welcome
Click to expand...
Click to collapse
I hope this guide will help you!

lomax84 said:
Hi all,
after waiting 15 days, I have unlocked the bootloader, flashed twrp, firmware and rom, then rebooted.
the phone is dead ever since.
I can see it in device manager as "Qualcomm HS-USB QDLoader 9008 (COM10)", but I am not able to flash a rom through miflash.
any help is welcome
Click to expand...
Click to collapse
Hard brick. I went through it. Follow these steps: https://www.youtube.com/watch?v=lfkRHAW2iXI .
1- You have to activate the EDL mode.
2- In MiFlash Choose CLEAN ALL and install this rom: http://bigota.d.miui.com/V9.2.7.0.N...EK_20180406.0000.00_7.1_global_179eb04f38.tgz
3- Installed TWRP, WIPES and flash https://androidfilehost.com/?fid=5862345805528041092 and Magisk
4- Come back TWRP, WIPES and install your favorite rom. :good:
PD: If you see "COM7" in MIFLASH, go directly to step 2.
---------- Post added at 07:59 PM ---------- Previous post was at 07:55 PM ----------
Jehonan said:
EDL booting and flashing is your solution.
Now, only debatable is will you use EDL booting procedure which requires opening of the phone to short two contacts to be able to boot in EDL or You will use altered ADB which gives possibility to boot in EDL without case opening. This second option is somehow questionable but first, i think, if second option to enter EDL without opening is way to go!
---------- Post added at 07:37 PM ---------- Previous post was at 07:03 PM ----------
I hope this guide will help you!
Click to expand...
Click to collapse
The second opcion (ADB) doesnt work in RMN5.

what rom caused the brick?

devcon69 said:
what rom caused the brick?
Click to expand...
Click to collapse
info updated in the first post.
Is it crucial to have COM 7 port for EDL?

so, its been over a day now, have you fixed the problem?

t.hasan1 said:
so, its been over a day now, have you fixed the problem?
Click to expand...
Click to collapse
the phone is alive again.
I am in the process of flashing a custom rom again.
I'll update you when I'm done

lomax84 said:
the phone is alive again.
I am in the process of flashing a custom rom again.
I'll update you when I'm done
Click to expand...
Click to collapse
Whats did you do?

lomax84 said:
the phone is alive again.
I am in the process of flashing a custom rom again.
I'll update you when I'm done
Click to expand...
Click to collapse
what method you solved your brick phone ?

Give the method you do

Error: Cannot read hello packet. Why solved?

following...how did you solve it ? come on

mxilil said:
what method you solved your brick phone ?
Click to expand...
Click to collapse
masjiko said:
Give the method you do
Click to expand...
Click to collapse
please see first post

I tried to test point to give flash in the rom by Miflash, the pc recognizes my device in the COM port, when initiating the process it gives an error message: CAN NOT READ HELLO PACKET. Does anyone know how I can solve this problem? my device is simply dead because of that anti-rollback that Xiaomi implemented.

Diegosdias said:
I tried to test point to give flash in the rom by Miflash, the pc recognizes my device in the COM port, when initiating the process it gives an error message: CAN NOT READ HELLO PACKET. Does anyone know how I can solve this problem? my device is simply dead because of that anti-rollback that Xiaomi implemented.
Click to expand...
Click to collapse
Did you removed the battery?

devcon69 said:
Did you removed the battery?
Click to expand...
Click to collapse
yes...

Diegosdias said:
yes...
Click to expand...
Click to collapse
Try to use usb 2.0 ports.
Maybe edl mode has timed out. Press the power button for 20-30 seconds to power cycle the phone.
Or open it up and remove battery pin for a minute. Reconnect and try again.

devcon69 said:
Try to use usb 2.0 ports.
Maybe edl mode has timed out. Press the power button for 20-30 seconds to power cycle the phone.
Or open it up and remove battery pin for a minute. Reconnect and try again.
Click to expand...
Click to collapse
I already tried on usb ports 2 and 3, and it did not work. Holding the buttons for a long time did not solve either. I opened it to test point, removed the battery, but none of it makes the phone work. The problem is that at the time of fash in Miflash it gives the following error: CAN NOT READ HELLO POCKET. I do not know what this error is or what it is about?

lomax84 said:
please see first post
Click to expand...
Click to collapse
Did you recognize what caused the hard brick to your phone?
I think you followed the right steps, yet your phone got hard bricked, is it a firmware issue or RR rom issue?!

Ahmed_HM said:
Did you recognize what caused the hard brick to your phone?
I think you followed the right steps, yet your phone got hard bricked, is it a firmware issue or RR rom issue?!
Click to expand...
Click to collapse
By following his link to the firmware file on sourceforge you will see that he flashed a note4x firmware on his note5... So guess where the issue was...