Hello guys,
I've got a problem, I cannot find solution to. I've been stuck on this since like 8 hours.
I was watching a movie, when my note 2 turn off and it won't boot again. There is this white galaxy note 2 screen and then nothing happens. When I charge the phone, there is empty battery screen (no signal of battery being charged, but yet the phone is on when I try working with Odin, so I believe it's charging).
I've entered recovery mode but I cannot do anything there, all processes are in red font, wipin out data is impossible, recovery is not possible too. Nothing can be done succesfully.
I cannot connect to kies, even when the recovery downloading is possible, then there is this final screen saying kies was unable to connect to the phone, but I can connect to odin, but still I got "nand write start!" resulting in "fail!" and once I got "can't open the serial (com) port..
What should I do? It doesn't matter for me, which system version I work on, I just want my phone working.
Thanks for any help, I can make a photo using my second phone (old HTC).
If you are able to push files via Odin....there is hope....to include a PIT partitioning of the device again.
If no Odin or KIES....it's not good...
Sounds like partition damage or EMMC failure....g
gregsarg said:
If you are able to push files via Odin....there is hope....to include a PIT partitioning of the device again.
If no Odin or KIES....it's not good...
Sounds like partition damage or EMMC failure....g
Click to expand...
Click to collapse
cannot do pit partitioning.
A serviceman told me that there is no hope. I can repair it for 60 bucks (central europe prices) but no guarantee. I'm gonna buy a new phone then. Thanks for a reply.
Related
Hi I managed to to get to SDCARD Download mode from a dead boot N7105 using the SD Boot Repair SD. Odin recognizes this and phone was previously on 4.3 JellyBean already. Now when I'm trying to flash with Odin 3.09 , it says "There is no PIT partition" . Should I click the Phone Bootloader Update checkbox also? Need some advice from all the gurus here to guide me along this, thank you very much
Hi guys,
I have a very similar scenario but with an Samsung Galaxy S3 i9300:
Couple of days ago my phone went into booting loop but after removing the battery for a couple of minutes the issue was solved.
Then 3 days later it restart out of the sudden and was stuck on the Samsung Galaxy S III splash screen.
I rebooted and tried putting the phone in Download mode. The phone went into the Samsung Galaxy S III screen twice and turn off not to boot again. Seems like a hard bricked, no response with any buttons combinations.
I read other posts here saying that I could probably boot the phone with an micro sd card. So I donwloaded image I9300UBUGML1_I9300UWHUGMK1_I9300UBUGMK1_HOME from SamMobile and mouted in a 16 Gb type 10 micro SD (my phone is also 16 Gb version)
At first I tried booting the phone pressing the power button for about 10 seconds and the screen ligthted up very quickly (less than a second) saying
SDCARD MODE
UP KEY: NORMAL BOOTING
DOWN KEY: DOWNLOAD MODE
But it was so quick that I was not able to press anything.
A day later I figure out that if I was quick enough I could press down key and put the phone on Download mode (SDCARD)
After putting the phone on Download mode I connected the phone to the PC and tried flashing it with ODIN v3.07
Odin is able to see the device but when trying to flash the phone (selecting PDA and the image mention before) a message came up saying:
There is no PIT partition
And failed.
Reading about this error in this forum, I have tried using different PIT files to re-partion the phone but no success so far.
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
mx.pit
Odin stays on Get PIT for mapping after initializing the process.
I would like to know if anyone here have an idea on what else to try (before talking about JTAG reparing the phone as I am not 100% the phone is hard bricked)
I have not attempted to use a USB Jig yet, should I?
Other details:
I am not able to get the download with any other image file in the sd card.
If the phone is on download mode and connected to the PC, the battery can be removed and the phone stays on.
If I press up key in the SD CARD Mode the phone freezes.
Do you guys have any ideas here?
Thanks,
so i mistakenly flashed a rom that was meant for the i900 or something and i got hardbricked and im not sure what steps to take or anything.
I know that i can buy this thing to make it go to download mode, but ive already tried doing the not jtag or Jig method but i used my Sandisk Micro Sdcard 8gb Class 4 instead since i dont have the 16gb class 10 version. what do i do?
ive used the windsik 32 image writer to write the
debrick sphl710.img to that microsdcard and idk what to do now. my batter was at 75% charger aswell and also i noticed if i removed the battery and the sdcard and cable and plug in just the usb cable (connected to my pc) it showed a red led light and then it turned off after a bit and my computer read a driver was missing with QHDSLOAD or something like that.
Go download Odin, go find twrp recovery for your phone, get the tar file, open Odin, put your phone in download mood, uncheck auto reboot and reset time, click pda, select the tar, after Odin recognizes your phone then click start. If it says pass then disconnect, power off, boot into your recovery, and flash something like Rooted stock ND8.
I don't normally flash the wrong roms, but occasionally crap won't work no matter how many times I re-download or flash. All that seems to work is flash a new recovery and then boot into it and flash the rom I needed.
Its been a long time since I booted my Galaxy Note-II (GT-N7100) as I use an iPhone and Nexus 5 as my daily drivers.
The phone wont boot past the Samsung Galaxy Note II GT-N7100 logo. I am able to access the recovery and download mode as well, and I have flashed the latest stock rom from Sammobile using the Odin. The flashing was successful. however the phone doesn't boot past the logo. Also the phone will not power up unless connected to a PC, it wont power up even when connected to a charger and will immediately shut down when the USB cable is disconnected from the PC. I flashed TWRP 3.0.2 Custom Recovery using the Odin and tried installing CM 13 based Rom through the mem card, however the log reads patching image unconditionally and also that "Failed to mount /system" (invalid argument). The phone when restarted into recovery can no longer mount the /system partition. However on flashing the stock rom using Odin, the /system partition is available for mounting. The recovery log also shows MTP enabled, but my PC doesn't detect the phone when in recovery, it only detects the phone in Download mode. I have the Samsung drivers installed. Since the phone is not being detected in recovery I am unable to use the adb.
I am out of ideas and request your suggestions other than approaching a service centre.
If I can somehow access the phone via ADB, I might be able to check the memory partitions for corrupt units, and possibly create a custom PIT file to repartition and suit the available memory units.
Try this: open Odin, uncheck everything except f.reset time. Connect phone and flash stock ROM. When you see the word reset in the status window, remove USB cable, remove battery for a few seconds, replace battery, immediately boot the phone into recovery mode, factory wipe, and boot the phone.
Could the battery be defective or dead?
audit13 said:
Try this: open Odin, uncheck everything except f.reset time. Connect phone and flash stock ROM. When you see the word reset in the status window, remove USB cable, remove battery for a few seconds, replace battery, immediately boot the phone into recovery mode, factory wipe, and boot the phone.
Could the battery be defective or dead?
Click to expand...
Click to collapse
Thanks a lot.
Tried your method and finally the phone has booted into the OS.
Had to replace the battery with another spare one in the process.
However the phone is still not being detected by the PC unless it's in Fastboot/ Download mode.
When connected to a computer, does anything appear on the phone screen? If you're using Windows, nothing new appears in device manager?
sorry to jump in this thread but i am having a similar problem
my completely stock tmobile note 2 is stuck on the samsung logo
i have never flashed it or done anything to it
my phone was working really slow, freezing up and battery draining fast
so i did a hard reset and it fixed the problem of running slow and freezing up for a week or so but battery drained fast
so i bought a replacement battery from ebay and installed it and the next day i restarted my phone and it froze on the samsung logo
i tried turning it off and on and still the same thing
any suggestions or should i start a new thread?
fyi i am a noob
TL,DR:my s4 mini got a random android update and when it finished updating the evie launcher and touchwis stopped working then android stopped working, got frozen and then shut down after, some time i got it to enter odin mode put the stock rom and got into boot loop with samsung logo, i turn it off after some time, now it wont boot into anything, if a put a sd card with debrick img this apear and only this, if reboot and that msg show again
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
_________________________________
Long explanation:
My movistar brand samsung S4 mini (the phone contract ended so i change service provider so they did gave me a code and the phone was free from the contract and now it can accept any service provider) gt-i9190 2 year ago died after a chash in the system, i did have the evie launcher and a different keyboard (not using touchwis) the evie launcher stopped working then touchwis stopped working the phone home menu got to the simple layout then the phone freased and after a couple of second it shut down all this in less than 1 min t and never turn on again, i have a new phone but i will like to use the s4 mini for a proyect but its not starting,
i put an SDXC UHS-I class 10 A1 with a debrick.img(i did try 2 .img from this forum and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot and the same msg this for more than 30 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the bottom convination make it vibrate just after the reboot part and the boot recovery mode dont show again until i stop pressing the bottom comvination then it start the boot recovery loop again, the boot dont fail or at least it do not say it, it just stop trying to rebootafter a long time, its like if its waiting for something to be done by me, like using the botton combination to enter download mode but well idk what to do plz help
Time line of what happened so far
2018
phone died after random update of android OS , though it was his time as i own it for + 5 years
2019
got a new phone and got curious about what happened so i started looking the internet , ended in this website almost everytime.
i left the phone chargin while i searched for answers, i connected the phone to my pc, try the botton combination to get to download mode and recovery(not succesfull) , removed the battery, try to turn it on without baterry to drain all power of phone and restart volatile memory (multiple times) and put it again without gettin anywhere try to connected to a netbook that was freshly formated and with fresh windows 10 intall, odin in that pc recognise the phone just as Qloader-9008 com (x) continued searching and from nowhere the phone started vibrating and then stoped and the chargin icon apeared on the screen i left it to charge as that was the first time i was 100% sure it was chargin after 10+ hours chargin while i was sleeping i try the botton to enter download mode and it worked, try the stock rom from my model, country and service provider and the phone got stuck on a boot loop showing the movistar intro then the s4 mini intro and vibratin each time it was to late so i stupidly turn it of, next morning i got back to try make it work but now it was totally unresponsive odin didn recognize the phone, didnt enter download mode or recovery , no boot loop, nothing is only make a sound in my pc when i try the botton combinations but nothing more just a sound of something connecting and disconnectingx2 got frustrated and left it there collecting dust, also the usb jig dont work
2020
4 months ago i got back to try to make the s4 mini work so i searched the internet again and found the sd card way i did try it and now im here with the phone in a loop of rebootin an starting the same boot recovery mode, it do not say "Flash write failure Ddi : mmc_read dailed" as i did read on other threads in this forum so as i stated before
i put an SDXC UHS-I class 10 A1 with a debrick.img and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot on a loop and the same msg this for more than 15 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the boot dont fail or at least it do not say it, it just stop trying to reboot,
what can i do to at least get it to a point that kies or smart switch can take the controll or be able to use odin, the battery is at 3.78volts
If you can get your S4mini into Download mode, you should try Odin again. But this time, under the Options tab, UNcheck the box for Auto Reboot as well as the box for F. Reset Time. And then when Odin gives the green success indication, immediately disconnect USB and remove battery. Re-insert the battery after a minute or so. Another suggestion; flash the Movistar firmware only if you intend to use their carrier service. Otherwise, it would be better to use firmware not specific to any one carrier. Be sure the 3rd letter of the baseband code is "U" (for "unspecified" carrier). Good luck, hopefully your troubles are not due to faulty hardware.
HY to me happend tha Same my S4-Mini has showing Error in instand and after a tryed to Reboot the Phone was Complete DEAD , tryed the to Boot From SD- Card BOOT RECOVERY MODE it Says FLASH WRITE FAILURE ddi MMC read Failed ! Via odin same happens cant Write Read and NO PIT Partiion FOUND a Tryed also WiTH PIT FAIL .. IT LOOK MY S4- Mini Is Complete DEAD at least the emmc Chip
Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager
Titanity said:
Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager
Click to expand...
Click to collapse
How long your has lasting until it died myn was 8 Jears
DEXXO said:
How long your has lasting until it died myn was 8 Jears
Click to expand...
Click to collapse
I need a solution, not a competition in the fails
Titanity said:
I need a solution, not a competition in the fails
Click to expand...
Click to collapse
It was just a question plz dont Cry , and there is no solution your emmc sandisk memory is death 99% buy new or repair good luck
Hey Everybody,
I found this board by googling and hope someone of you can help me. I already scrolled through the pages but could not find someone with the same problem.
So here what I have (I will add infos due to guessing it could a cause of the problems):
I installed the latest update which was available on the Phone once.
Last week i looked at my phone whch had 11% battery but forgot to charge it, so it went to zero for a few days when I found it ter searching and charged it.
After around 20% recharge I decided to put it on.
Now - it turns on, tries to boot. The boot screen appears with that classic Samsung Galaxy Secured by Knox
But - it does not show it like Samsung Galaxy A32 Secured by Knox. It seems like the model is not displayed anymore.
The boot screen is displayed for a few seconds, then the Phone turns off. Then the start vibration comes, the short Samsung logo is shown and then the boot with "Samsung Galaxy Secured by Knox" is shown again. This happens in an endless loop.
I also tried different things from the secure mode like deleting the cache, some other websites tell to use a computer and a software called odin to fix a broken firmware (which I am not able to, due to lack of knowledge).
The problem here is that I have data on the phone (i.e google 2fa's) which I really need. Otherwise I would have tried a hard reset already.
If it helps, I uploaded 2 photos, what I can only see.
Somebody has an idea?
odin instructions https://www.google.com/url?sa=t&sou...4QFnoECCMQAQ&usg=AOvVaw0SvRFtiRxr0xDgcEa80iFh
LasseK1 said:
Hey Everybody,
I found this board by googling and hope someone of you can help me. I already scrolled through the pages but could not find someone with the same problem.
So here what I have (I will add infos due to guessing it could a cause of the problems):
I installed the latest update which was available on the Phone once.
Last week i looked at my phone whch had 11% battery but forgot to charge it, so it went to zero for a few days when I found it ter searching and charged it.
After around 20% recharge I decided to put it on.
Now - it turns on, tries to boot. The boot screen appears with that classic Samsung Galaxy Secured by Knox
But - it does not show it like Samsung Galaxy A32 Secured by Knox. It seems like the model is not displayed anymore.
The boot screen is displayed for a few seconds, then the Phone turns off. Then the start vibration comes, the short Samsung logo is shown and then the boot with "Samsung Galaxy Secured by Knox" is shown again. This happens in an endless loop.
I also tried different things from the secure mode like deleting the cache, some other websites tell to use a computer and a software called odin to fix a broken firmware (which I am not able to, due to lack of knowledge).
The problem here is that I have data on the phone (i.e google 2fa's) which I really need. Otherwise I would have tried a hard reset already.
If it helps, I uploaded 2 photos, what I can only see.
Somebody has an idea?
Click to expand...
Click to collapse
this phone never showed its model on the splash screen. Maybe you were mistaken. But anywho try reflashing firmware.
Download samsung usb driver from https://developer.samsung.com/android-usb-driver
and install it.
Download the correct firmware for your region from https://samfw.com/firmware/SM-A325F/
If you have a different model and not SM-A325F search for it.
Now after downloading unzip the firmware.
Put your phone in download mode. By turning it off. Make sure its unplugged. Then hold the volume up and volume up (not power) together while plugging the usb c cable connected to your pc into the phone. It should show a blue screen. Now just press the volume up key to continue as it says (or other key i forgot)
Now just put respective firmware files in their respective slots.
You might see there are two csc files. Home_csc and normal csc.
The difference between the two is that Home_csc file does not wipe the /data partition. Which includes your internal storage. apps etc. While csc file wipes everything.
(userdata partition is to be left empty)
it will reboot on its own and boot into the system.
(NOTE: if you use one ui 5.1 firmware and upgraded to it recently then only use that one. Since it is not downgradable. Although if your on one ui 5. Be careful. 5.1 is not downgradable and some users are reporting broken touch screens)
good luck!
thank you or your replies. I will try it out
Try to format cache, if doesn't work format data, and if that doesn't work, flash the rom for your device, you can download it here http://samfw.com you have to choose your model, the carrier and the binary number correctly, that data is in the download mode, to access it you have to plug an usb cable to your pc, first, press both volume buttons, after that plug the usb cable to the phone, then an screen will turn on, offering 3 choices, press volume button, now open odin(after installing samsung usb driver and verifying presence in odin) choose the files BL, AP, CP, CSC(not HOME CSC, that is for applying system updates), flash it with odin and ready! Extra: You can root your device patching that rom before flashing it with odin.
iWisp360 said:
Try to format cache, if doesn't work format data, and if that doesn't work, flash the rom for your device, you can download it here http://samfw.com you have to choose your model, the carrier and the binary number correctly, that data is in the download mode, to access it you have to plug an usb cable to your pc, first, press both volume buttons, after that plug the usb cable to the phone, then an screen will turn on, offering 3 choices, press volume button, now open odin(after installing samsung usb driver and verifying presence in odin) choose the files BL, AP, CP, CSC(not HOME CSC, that is for applying system updates), flash it with odin and ready! Extra: You can root your device patching that rom before flashing it with odin.
Click to expand...
Click to collapse
but
Captain_cookie_200said i should use the Home one, because otherwise everything gets deleted. That is the problem. I need the data
Ok I tried now to load the actual Home.CSC but now it is even worse
cant get into the Odin menu and the Display is lighting up for a split second all 3-4 seconds. might be dead now?
LasseK1 said:
but
Captain_cookie_200said i should use the Home one, because otherwise everything gets deleted. That is the problem. I need the data
Click to expand...
Click to collapse
yeah Home csc keeps your data partition intact.
LasseK1 said:
Ok I tried now to load the actual Home.CSC but now it is even worse
cant get into the Odin menu and the Display is lighting up for a split second all 3-4 seconds. might be dead now?
Click to expand...
Click to collapse
thats weird .. Could you elborate a bit more on whats happening?
Captain_cookie_200 said:
thats weird .. Could you elborate a bit more on whats happening?
Click to expand...
Click to collapse
when i push the power on button the display lights bright for a split second and turns off after like a milli second. turns off for 3 seconds and repeats in a loop.
LasseK1 said:
when i push the power on button the display lights bright for a split second and turns off after like a milli second. turns off for 3 seconds and repeats in a loop.
Click to expand...
Click to collapse
i am still confused. if there is a chance could you show it on video?