Related
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
I used the Pit mapping for the T210. The recovery partition is "mmcblk0p10." I checked the partition info on my T210R using Partition Table by Lakshman. The T210R also has its Recovery partition on "mmcblk0p10," so I expect it to work no problem. And TWRP Odin flashables tend to be compatible with several 7.0 variants.
Click to expand...
Click to collapse
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Greaper88 said:
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Click to expand...
Click to collapse
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
code72 said:
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
Click to expand...
Click to collapse
You can try The Nolekat Rom. It is fest Best Customrom for our Tab.
Sooooo.....
Did it work? Im curious as I got the T2105 tab for my kid and the darn thing is really slow for running Spider- Man Unlimited and some other apps
I want to put Cyanogenmod on it or some other rom with less crap
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
juggalofr33k said:
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
Click to expand...
Click to collapse
Your Bootloop prob is like the same as we have on The other device.
Flash a recovery with The Kitkat KK extension.
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
juggalofr33k said:
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
Click to expand...
Click to collapse
Yes, thats bootloop into recovery.
I prefere CWM or PhilzTouch on all my device.
Right on. Ill give those recoveries a shot. I have used CWM in the past (HTC Aria), but ive been using TWRP since i got the Galaxy Nexus. Ill give them both a try and report back in a few days... My internet connection sucks ass, so it takes hours to download a rom...
code72 said:
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
Click to expand...
Click to collapse
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
thethakuri said:
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
Click to expand...
Click to collapse
thanks for report thethakuri... i tried to do this too, but for me it doesnt work ... after i installed the 4.4.2, i had a black screen on boot and my tablet dont charge offline... so, i turned to 4.1.2... can you give me any sugesttion?
Update from me: Just upgraded my US SM-T2105 Kids tablet to the UK KK version as well (T210XXBOA3_T210BTUBOA2_Home.tar.md5). Did not work with Odin 3.11 but worked with 3.07 as mentioned above.
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
idefix_sin said:
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
Click to expand...
Click to collapse
Did you ever find a fix for the screen issue? I'm going to give this a shot this weekend my daughter really wants pokemon go on her tablet!
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
idefix_sin said:
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
Click to expand...
Click to collapse
thanks.. by the way did use a recovery? or just flash T210XXBOA3_T210BTUBOA2_Home.tar.md5 with oden?
Hi.
Will update to 4.4.2 would enable the move app to sd card?
Thank you.
any solution to remove kids feature
Root the device and uninstall using root uninstaller.
Newbie but ive been lurking here since the evo4g days always glad there are updates for anyone to follow. lately i havent come up with one for my note 4, can anyone help me on this matter? atm its rooted 4.4.4 knox has been tripped and if it helps SM-N910P. tried searching for youtube, google, and throughout different threads. i connected my phone to smart switch pc samsung program and it detects an update for it but im too scared it will brick it if i go on that route. Many thanks in advance
xxSEIYAxx said:
Newbie but ive been lurking here since the evo4g days always glad there are updates for anyone to follow. lately i havent come up with one for my note 4, can anyone help me on this matter? atm its rooted 4.4.4 knox has been tripped and if it helps SM-N910P. tried searching for youtube, google, and throughout different threads. i connected my phone to smart switch pc samsung program and it detects an update for it but im too scared it will brick it if i go on that route. Many thanks in advance
Click to expand...
Click to collapse
oops forgot to post, i would like to keep it rooted since i use my sd card a whole bunch. saw that since jelly bean not just any app can use sd card to read write info.
xxSEIYAxx said:
oops forgot to post, i would like to keep it rooted since i use my sd card a whole bunch. saw that since jelly bean not just any app can use sd card to read write info.
Click to expand...
Click to collapse
Ok, pretty easy.
First you have to get your phones partitions right for 5.1.1.
To do it go to this link:
http://forum.xda-developers.com/showthread.php?t=3252903
and follow the op carefully.
The instructions written in red a couple paragraphs down in the the thread has the link you need to get your phone to 5.1.1.
After that you can flash any rom in this forum you'd like.
Good luck and don't forget to give @tx_dbs_tx a big thanks (and any thing else you'd like) for the commitment and hard work he has done for us all.
jhill110 said:
Ok, pretty easy.
First you have to get your phones partitions right for 5.1.1.
To do it go to this link:
http://forum.xda-developers.com/showthread.php?t=3252903
and follow the op carefully.
The instructions written in red a couple paragraphs down in the the thread has the link you need to get your phone to 5.1.1.
After that you can flash any rom in this forum you'd like.
Good luck and don't forget to give @tx_dbs_tx a big thanks (and any thing else you'd like) for the commitment and hard work he has done for us all.
Click to expand...
Click to collapse
thanks so much, i might have messed up i pull up supersu and it tells me "there is no su binary installed and supersu cannot install it. this is a problem!" - i dont know if i really need this, i mainly rooted jelly bean note 4 to get sd card access on my 3rd party apps and it works as is right now
also it keeps bugging me if i want to install a 150.16MB update N910PVPS4COK1/N910PSPT4COK1/N910PVPS4COK1 - should i just go ahead and install it?
other than that everything seems to be working, faster and better than before.
xxSEIYAxx said:
thanks so much, i might have messed up i pull up supersu and it tells me "there is no su binary installed and supersu cannot install it. this is a problem!" - i dont know if i really need this, i mainly rooted jelly bean note 4 to get sd card access on my 3rd party apps and it works as is right now
also it keeps bugging me if i want to install a 150.16MB update N910PVPS4COK1/N910PSPT4COK1/N910PVPS4COK1 - should i just go ahead and install it?
other than that everything seems to be working, faster and better than before.
Click to expand...
Click to collapse
First of, don't take the ota just yet. Wait for comments about it first. If your on a custom rom you shouldn't be getting that update notification.
Which rom are you on when you get the SuperSU message?
If you are now up to 5.1.1 and flashed a custom rom you don't need to root.
Explain a little what you did to see if the issue can be sniffed out.
jhill110 said:
First of, don't take the ota just yet. Wait for comments about it first. If your on a custom rom you shouldn't be getting that update notification.
Which rom are you on when you get the SuperSU message?
If you are now up to 5.1.1 and flashed a custom rom you don't need to root.
Explain a little what you did to see if the issue can be sniffed out.
Click to expand...
Click to collapse
Yeah i followed the instructions in full of the thread you connected me to. im on 5.1.1 stock, i flashed the odexed version tx_dbs_tx placed on there.
i dont really flash any other rom in there that isnt stock since i know most have issues recognizing the spen
if it helps software version im on is N910PVPU4COJ6
hardware version N910P.05
the supersu message i mentioned earlier only appears if i hit the supsu app
xxSEIYAxx said:
Yeah i followed the instructions in full of the thread you connected me to. im on 5.1.1 stock, i flashed the odexed version tx_dbs_tx placed on there.
i dont really flash any other rom in there that isnt stock since i know most have issues recognizing the spen
if it helps software version im on is N910PVPU4COJ6
hardware version N910P.05
the supersu message i mentioned earlier only appears if i hit the supsu app
Click to expand...
Click to collapse
for the full steps on what i did is
Odin flash the stock OJ6 rom tar using odin on your PC. on that step it took forever it build the library and then i just made sure i was able to connect to usb for the next step.
i went ahead and placed the downloaded sprint stock rom onto my external
went to the recovery mode i wiped my internal 3 times
then i hit the apply update on external i believe is the option i chose (the way he explained on the thread was way different from what i had, i mean the wording). i selected the sprint stock and it hung up for a while on the sprint spark, built library again and phone was as if it was brand new asking me to signin google.
it downloaded all my previous apps even the sprint crap ( i was able to uninstall those) other than updating the apps and messing around w them i really havent done much else. bluetooth works as well as texting and calls, wifi too
Well, you can be sure if @tx_dbs_tx released a rom it's darn near perfect. His roms come prerooted.
If you are still having supersu issues do a wipe and install any of his roms. They don't have issues... I've been using his roms for over a year and have found problems are usually user created.
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
djisback said:
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
Click to expand...
Click to collapse
I bought the phone already with 6.0.1 on it and read that you cannot unlock/ root it with mm on it and can only be done after downgrading to 5.1.1 so I haven't done anything yet
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
tjmethod said:
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
Click to expand...
Click to collapse
sudermatt said:
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
Click to expand...
Click to collapse
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
quinciebee said:
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
Click to expand...
Click to collapse
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
tjmethod said:
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
Click to expand...
Click to collapse
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
quinciebee said:
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
Click to expand...
Click to collapse
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
tjmethod said:
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
Click to expand...
Click to collapse
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
quinciebee said:
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
Click to expand...
Click to collapse
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
ziggy71 said:
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
Click to expand...
Click to collapse
Thanks bro I don't if I'll have time til this weekend to do this- Does this rom have tweaks to fix the aggravating galaxy lag? With a non rooted phone there's goin into recovery and deleting cache, DU speed and phone booster, cleaned but it's like they all have it- thanks again- lookin forward to rooting this damn thing
tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
kevintm78 said:
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
Click to expand...
Click to collapse
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
tjmethod said:
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
Click to expand...
Click to collapse
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
kevintm78 said:
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
Click to expand...
Click to collapse
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
tjmethod said:
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
Click to expand...
Click to collapse
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
kevintm78 said:
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
Click to expand...
Click to collapse
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
tjmethod said:
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
Click to expand...
Click to collapse
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
kevintm78 said:
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
Click to expand...
Click to collapse
Oh man that sucks- hopefully they gave you some good pain meds. Anyway, I havent taken th plunge yet- once I get on to 5.1.1 then twrp, I want to go on to 6.0.1 but am unsure as to what point the bootloader is unlocked or exactly what to do to upgrade to 6.0.1 once I crack the bl. I just dont want to go through the dreaded set up everything twice.
Hi Guys,
I've just spent the last 8 hours trying to get an Canadian Note 7 to custom recovery and ROM with NO luck !
I've done a couple of Note 7s of UK spec but this is the first Note 7 from Canada, and so far i've had no luck at getting it to accept anything.
The handset has received the cripple code that has disabled wifi, blutooth, 4G, tethering and reduced the battery capacity to 15%
I have tried several files and different methods of loading in a custom recovery so i can then load a custom ROM.
The favorite is to use ODIN and then either load CWM or TWRP.
When trying to load either CWM or TWRP i get an "Auth Fail" or "QTQ Close" error
I tried to use the Sprint method to get into the system and allow a custom ROM and all this did was brick the phone... Its currently stuck in no boot state which just takes me into the standard android recovery with errors of "dirty targets", "check DRK files" and "dm-Verity verification failed"
At the moment i cant find a way to get the handset to load a custom recovery and then a rom, stock or custom.
If anyone can help with fixing This-POS Canadian Telus Note 7 Handset i would greatly appreciate it before i stamp on it and send it back to samsung !
cheers guys
The Canadian variant has a locked bootloader, so no custom recovery and no root. There are workarounds to get the older firmware back that doesn't cripple the phone. There are threads on here for that if you search around.
Sevael said:
The Canadian variant has a locked bootloader, so no custom recovery and no root. There are workarounds to get the older firmware back that doesn't cripple the phone. There are threads on here for that if you search around.
Click to expand...
Click to collapse
Correct, no root yet unless its first gen N7 with first firmware but im sure non around anymore.
Best bet is to find a firmware and downgrade to 100% battery. Then block all the packages to prevent future updates from samsung. If you IMEI was blocked then that is a whole different ball game in which Samsung is winning so far in Canada
Thanks for the info guys
I spent 9 hours in the end attacking this thing from all angles and just managed to corrupt it so it doesn't even boot now.
The Canadian phone companies and samsung have done a dam good job at taking these phones down or rendering them totally useless.
Own31,
Do you have any recommendations on what i should use / try to rectify this
Hi, can you put it in download mode? Power +home+volume down
Sent from my SM-N920T using XDA-Developers Legacy app
Can someone link me the sprint engineering guide for the snapdragon phones?
I accidentally tried to flash a exynos rom and bricked it before realising there were multiple variants durrr
Managed to find my stock rom for my rogers note 7 and used odin to flash it in download mode to reset it. Currently turns on and has the 100% battery but every time I turn on wifi it prompts for the 60% battery update and I don't know how to block the package.
Edit: Caved and bought package disabler pro and no longer get prompts
GlitchZenfone2 said:
Can someone link me the sprint engineering guide for the snapdragon phones?
I accidentally tried to flash a exynos rom and bricked it before realising there were multiple variants durrr
Managed to find my stock rom for my rogers note 7 and used odin to flash it in download mode to reset it. Currently turns on and has the 100% battery but every time I turn on wifi it prompts for the 60% battery update and I don't know how to block the package.
Edit: Caved and bought package disabler pro and no longer get prompts
Click to expand...
Click to collapse
What firmware are you on? Unless its APH1 you cant root.
Sent from my Note 7, S7 Edge or S6
jopa7 said:
Hi, can you put it in download mode? Power +home+volume down
Click to expand...
Click to collapse
Hi Jopa, yes i can still get into download mode
GlitchZenfone2 said:
Can someone link me the sprint engineering guide for the snapdragon phones?
I accidentally tried to flash a exynos rom and bricked it before realising there were multiple variants durrr
Managed to find my stock rom for my rogers note 7 and used odin to flash it in download mode to reset it. Currently turns on and has the 100% battery but every time I turn on wifi it prompts for the 60% battery update and I don't know how to block the package.
Edit: Caved and bought package disabler pro and no longer get prompts
Click to expand...
Click to collapse
I don't suppose you've seen a rom for a Telus Note 7 have you?
the one i'm trying to flash reports as:
6.0.1/MMB29M/N930W8VLU3APL1
Darkstorm_G4 said:
I don't suppose you've seen a rom for a Telus Note 7 have you?
the one i'm trying to flash reports as:
6.0.1/MMB29M/N930W8VLU3APL1
Click to expand...
Click to collapse
I'd have to refind it. There was a link I found for all the canadian roms but I only downloaded the one I needed of course.
force70 said:
What firmware are you on? Unless its APH1 you cant root.
Sent from my Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Nop... I'm on API3.
I'm using package disabler right now to avoid the OTA updates. I had a notification today that the update was downloading so I just turned off wifi and disabled almost everything under the sun (besides core services) relating to samsung and it no longer seems to be connecting to the update server which is what I want in the end.
Well the saga continues...
I managed to trick it into letting me sideload from ADB.... only problem is i couldn't find any files in .zip format to side load and those that i could it wouldn't accept.
I did manage to get a partial sucsess with odin and got a CP file to install properly... sadly it rejected the BL, AP and CSC files and now its really screwed things up as it just boot loops now and the android recovery kinda doesn't work now.
So any ideas on how to defeat this POS, i refuse to let Samsung Canada and the phone companies beat me, but i think i am fighting a losing battle...
Only half decent firmware files i could find were N930W8VLU1APH1_N930W8OYA1APH1_ESK
Ok really screwed it now ! GERRRRRR
Managed to get it to take a new Bootloader ! all completed in ODIN and the phone rebooted, started to load then crashed and now wont turn on at all - TOTALLY BRICKED !
but the strange thing is, when you plug it in windows still sees it, you would expect nothing to happen like if the phone were switched off completely, but Windows 7 sees it as a device and set up drivers for ELINK HS-USB QDLoader 9008 (COM5)
very odd, and incredibly frustrating !
Darkstorm_G4 said:
Well the saga continues...
I managed to trick it into letting me sideload from ADB.... only problem is i couldn't find any files in .zip format to side load and those that i could it wouldn't accept.
I did manage to get a partial sucsess with odin and got a CP file to install properly... sadly it rejected the BL, AP and CSC files and now its really screwed things up as it just boot loops now and the android recovery kinda doesn't work now.
So any ideas on how to defeat this POS, i refuse to let Samsung Canada and the phone companies beat me, but i think i am fighting a losing battle...
Only half decent firmware files i could find were N930W8VLU1APH1_N930W8OYA1APH1_ESK
Click to expand...
Click to collapse
That file is useless unless that is what was on the device prior to it getting messed up.
So what was it on when you tried messing with it PI3?
Sent from my Note 7, S7 Edge or S6
---------- Post added at 04:19 PM ---------- Previous post was at 04:03 PM ----------
Darkstorm_G4 said:
I don't suppose you've seen a rom for a Telus Note 7 have you?
the one i'm trying to flash reports as:
6.0.1/MMB29M/N930W8VLU3APL1
Click to expand...
Click to collapse
I think that was the firmware which came with the device, the first original firmware which shipped with it from samsung before the APH1 OTA.
Of course you cant flash that, no surprise there
Sent from my Note 7, S7 Edge or S6
APH1 Note 7 Rogers with 15% update, no WiFi/Cellular
New user here. I've got an APH1 Note 7 first edition without the green battery icon on Rogers in Canada in the same situation - 15% battery, no WiFi, no cellular. I've tried a few package disablers but it seems all the free ones require WiFi to activate the product license (which I can't exactly do). It's failed every Odin flash attempt I've made, usually stopping at recovery.img or a couple of steps after that. I've tried flashing firmware from all US variants and multiple Canadian ones as well. Any ideas on how to recover the phone? It still boots (even though I semi-bricked it twice). I'm thinking that there might be some options through ADB - could anyone guide me on how to do that?
moldee5 said:
New user here. I've got an APH1 Note 7 first edition without the green battery icon on Rogers in Canada in the same situation - 15% battery, no WiFi, no cellular. I've tried a few package disablers but it seems all the free ones require WiFi to activate the product license (which I can't exactly do). It's failed every Odin flash attempt I've made, usually stopping at recovery.img or a couple of steps after that. I've tried flashing firmware from all US variants and multiple Canadian ones as well. Any ideas on how to recover the phone? It still boots (even though I semi-bricked it twice). I'm thinking that there might be some options through ADB - could anyone guide me on how to do that?
Click to expand...
Click to collapse
Your lucky man...original firmware means you can still root with the engineering firmware. That should kill any OTAs. Check out the development forum in the Tmo note 7 area.
In addition check out note7alliance.com they have a working disabler.
Is yours still working on the network? I had thought all note 7s here were blocked from cellular networks...mine is from rogers
Sent from my Note 7, S7 Edge or S6
force70 said:
Your lucky man...original firmware means you can still root with the engineering firmware. That should kill any OTAs. Check out the development forum in the Tmo note 7 area.
In addition check out note7alliance.com they have a working disabler.
Is yours still working on the network? I had thought all note 7s here were blocked from cellular networks...mine is from rogers
Sent from my Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Just like you, running on Rogers with no network connectivity.
Seems like the N7A package disabler requires WiFi to authenticate, so I can't use that method sadly.
Right now I'm trying to use a spare rooted phone to put a package disabler app onto my SD, to see if I can then run the app in the Note 7. It's one of the few options I have left, but I'll still try it, as I can't flash firmware without blocking updates.
moldee5 said:
Just like you, running on Rogers with no network connectivity.
Seems like the N7A package disabler requires WiFi to authenticate, so I can't use that method sadly.
Right now I'm trying to use a spare rooted phone to put a package disabler app onto my SD, to see if I can then run the app in the Note 7. It's one of the few options I have left, but I'll still try it, as I can't flash firmware without blocking updates.
Click to expand...
Click to collapse
If you follow there directions having wifi on briefly isnt a problem.
I think i have the firmware your running saved somewhere if you need it.
Sent from my Note 7, S7 Edge or S6
force70 said:
If you follow there directions having wifi on briefly isnt a problem.
I think i have the firmware your running saved somewhere if you need it.
Sent from my Note 7, S7 Edge or S6
Click to expand...
Click to collapse
I've got the Rogers APH3 firmware lying around, so I should be good on that front.
I'll see how far I can get with the N7A method. Thanks for the advice.
i have a rogers note 7 still. thought about trying to make it work but seeing everyones struggles, doesnt seem worth it. anyone have luck selling these things?
The market for Note 7s is mixed. Some units requiring more software work sell for as little as $200 (that's what I paid); decently working units (e.g. 60% limited units) fetch ~$600; and perfect condition units without any disabling updates can still for $1000. Some brand new in box units can still sell for $2000.
That said, is selling even legal? What are the implications around that?
I'm planning on running Lineage OS. I was wondering if I can load Lineage OS on my Note 2 device. I would hopefully like Mobile Services like LTE and calling/texting to work, wifi too. Help please!
You should make a TWRP backup and try the build for t0lte.
If it doesn't work then restore your backup.
Option58 said:
You should make a TWRP backup and try the build for t0lte.
If it doesn't work then restore your backup.
Click to expand...
Click to collapse
Thanks! But you know... I'm a little bit new to this. What is t0lte mean and would verizon work with this (LTE and WIFI and also texting and calling.
Why I'm new is because I used to hack around with my old kindle tablet and I just got my first android phone (used to have an iPhone 6). So I check the lineage OS website and I didn't see one for SCH-I605, so I thought there would be no options. But thanks!
piggyuniform said:
Thanks! But you know... I'm a little bit new to this. What is t0lte mean and would verizon work with this (LTE and WIFI and also texting and calling.
Why I'm new is because I used to hack around with my old kindle tablet and I just got my first android phone (used to have an iPhone 6). So I check the lineage OS website and I didn't see one for SCH-I605, so I thought there would be no options. But thanks!
Click to expand...
Click to collapse
The galaxy note 2 has a few versions, the two biggest are the international version (t03g/GT-N7100; doesn't support LTE ), (t0lte/GT-N7105; supports LTE). I personally don't suggest you install lineage for t0lte but you could try and give it a shot. it has been known that kernels for the n7105 can work on the i605 so I don't see why a rom wouldn't be able to work since the differences between the devices are minimal. I doubt you will be able to install it though since there should be a device check within the updater script that prevents you from installing the ROM but you can look it up on how to remove this checking if you REALLY want to install it. Be careful if you flash the rom, make sure you do a TWRP backup of the system and data to be on the safe side.
Regards
EDIT: There seems to be a few people who has had some success when installing lineage t0lte for the i605. I still advise against it but at least now you know that it may work for you.
Valkyrie146 said:
The galaxy note 2 has a few versions, the two biggest are the international version (t03g/GT-N7100; doesn't support LTE ), (t0lte/GT-N7105; supports LTE). I personally don't suggest you install lineage for t0lte but you could try and give it a shot. it has been known that kernels for the n7105 can work on the i605 so I don't see why a rom wouldn't be able to work since the differences between the devices are minimal. I doubt you will be able to install it though since there should be a device check within the updater script that prevents you from installing the ROM but you can look it up on how to remove this checking if you REALLY want to install it. Be careful if you flash the rom, make sure you do a TWRP backup of the system and data to be on the safe side.
Regards
EDIT: There seems to be a few people who has had some success when installing lineage t0lte for the i605. I still advise against it but at least now you know that it may work for you.
Click to expand...
Click to collapse
Thanks for that, now I understand! I've been stuck on one route for the past while though. Since the I605 uses Verizon which has a locked down boot loader... I've been trying to run Suck It Verizon and No You Verizon. Im kind of worried if I will get soft bricked, which is fine because I can flash stock recovery, but if I get hard bricked, I'm screwed for sure. So I've been trying to load a android 4.1 or 4.1.1 or 4.1.2 stock rom but I can't seem to do that because I run 4.4.2, as of that I already have No you Verizon (Android File Host has working downloads for it right now). If you know what I mean, have you gone through this trouble before (or parts of it?), because I am in horrible pain lol.
No joy on the t0lte LineageOS. It fails the device check.
Check the Verizon forum for possible solutions: https://forum.xda-developers.com/note-2-verizon