I am using sphinx rom on lg g pro. I did a factory reset from settings. When phone reboots twrp recovery starts.now every reboot takes me to twrp recovery. I tried to format from twrp but it failed. Can some help me boot my os?
Flash this file via recovery
Sent from my LG-E980 using Tapatalk
How can I copy this file into phone?
A4speaker said:
How can I copy this file into phone?
Click to expand...
Click to collapse
I copied this file to SD card. But in recovery I cant see SD card option in install menu.
Related
i accidentally wiped my internal storage while flashing jellybomb i am in twrp but have nothing to boot to how can i load a rom to boot to
Use Odin and download mode if you don't have a ROM on your external SD card to flash. I always keep a few different ROMs on my external in case something goes wrong which I have had happen before. You have to flash a tar file using Odin not a zip of a ROM
Sent from my Nexus 7 using Tapatalk 2
BRADON2103 said:
i accidentally wiped my internal storage while flashing jellybomb i am in twrp but have nothing to boot to how can i load a rom to boot to
Click to expand...
Click to collapse
TWRP should give you option to mount as USB Storage, Can load rom onto your SD, Unmount, flash, and get moving again.
Hey guys , seeking help from the pros here.
I tried to install a new rom yesterday and mistakenly hit the format SD option instead of format System to clean phone before installing a new Rom. Now my problem is my internal memory has no files now, when going in cwm and trying to install rom from internal memory it says there are no files.
So i was wondering if anyone knows a way i can flash files back into the phone, i tried Odin and some of the flash stock rom guides here but i boot loop and it removed my cwm, so when i go into recovery i actually go into androids stock recovery mode. I have tried to flash cwm again and that seems to work but still no files in the phone. Help.
Grim1216 said:
Hey guys , seeking help from the pros here.
I tried to install a new rom yesterday and mistakenly hit the format SD option instead of format System to clean phone before installing a new Rom. Now my problem is my internal memory has no files now, when going in cwm and trying to install rom from internal memory it says there are no files.
So i was wondering if anyone knows a way i can flash files back into the phone, i tried Odin and some of the flash stock rom guides here but i boot loop and it removed my cwm, so when i go into recovery i actually go into androids stock recovery mode. I have tried to flash cwm again and that seems to work but still no files in the phone. Help.
Click to expand...
Click to collapse
You should be able to mount sd card from recovery. Choose that option in advanced. I use twrp now and it's a bit easier to use than com. Once you mount the sd card find it on your computer move the rom zip there. Now unmount the sd and flash away.
Sent from my GT-N7105 using XDA Premium 4 mobile app
210euser said:
You should be able to mount sd card from recovery. Choose that option in advanced. I use twrp now and it's a bit easier to use than com. Once you mount the sd card find it on your computer move the rom zip there. Now unmount the sd and flash away.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ill try twrp now , never used it before always on cwm. Wasnt sure it was different like that , thanks.
Grim1216 said:
Ill try twrp now , never used it before always on cwm. Wasnt sure it was different like that , thanks.
Click to expand...
Click to collapse
Twrp seems easier to use and it has big buttons with the touch screen.
If you have an external sd put the rom on it from your pc. Then select external sd from twrp by touching it where it says internal and select external. Now flash a custom rom.
Sent from my GT-N7105 using XDA Premium 4 mobile app
HI everyone.
i have just installed the new DN3 v5 rom. my previous was an omega v27 so an 4.3 android based rom and before the flash i have do all the wipe for a clean install: system,data,cache,dalvik. now my phone won't start with the rom, it start directly in TWRP(2.7.0.2) without load the rom. any solution?
sorry for bad english.
thx
Thepunisherg4 said:
HI everyone.
i have just installed the new DN3 v5 rom. my previous was an omega v27 so an 4.3 android based rom and before the flash i have do all the wipe for a clean install: system,data,cache,dalvik. now my phone won't start with the rom, it start directly in TWRP(2.7.0.2) without load the rom. any solution?
sorry for bad english.
thx
Click to expand...
Click to collapse
Did you try rebooting from within the recovery menu "reboot system"? If that doesn't help just reflash v5 again since you can access recovery.Good luck
singhpratik87 said:
Did you try rebooting from within the recovery menu "reboot system"? If that doesn't help just reflash v5 again since you can access recovery.Good luck
Click to expand...
Click to collapse
Yes i've already tried, i've also try to reflash the Rom several time but nothing. The only thing i can do is to go in recovery. The Rom wuoldn't boot up. Help me please.
Thepunisherg4 said:
Yes i've already tried, i've also try to reflash the Rom several time but nothing. The only thing i can do is to go in recovery. The Rom wuoldn't boot up. Help me please.
Click to expand...
Click to collapse
Sometimes the recovery refuses to flash the ROM correctly so one needs to switch recovery so i'll link you up with philz 6.25.0 just flash that recovery using your existing twrp recovery and then "reboot recovery" from within the twrp menu now it will bring up your new philz recovery up. (place the zip file of philz touch in your sd card via card reader)
Go to this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100 scroll down and download 6.25.0 or 6.26.0 .zip file and follow the above steps.If you need help on how to wipe your phone using philz follow this guide below
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Now once you have succesfully flashed your rom and it boots up and you set up your phone,you can always switch back to twrp ,Good luck
singhpratik87 said:
Sometimes the recovery refuses to flash the ROM correctly so one needs to switch recovery so i'll link you up with philz 6.25.0 just flash that recovery using your existing twrp recovery and then "reboot recovery" from within the twrp menu now it will bring up your new philz recovery up. (place the zip file of philz touch in your sd card via card reader)
Go to this http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100 scroll down and download 6.25.0 or 6.26.0 .zip file and follow the above steps.If you need help on how to wipe your phone using philz follow this guide below
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Now once you have succesfully flashed your rom and it boots up and you set up your phone,you can always switch back to twrp ,Good luck
Click to expand...
Click to collapse
nothing...stil boot into recovery.. :crying:
Thepunisherg4 said:
nothing...stil boot into recovery.. :crying:
Click to expand...
Click to collapse
Can you flash your omega v27 rom again?Or even that doesn't boot up?
Do you have stock 4.3 ROM? Flash that via ODIN and re root your phone and do the steps again
singhpratik87 said:
Can you flash your omega v27 rom again?Or even that doesn't boot up?
Do you have stock 4.3 ROM? Flash that via ODIN and re root your phone and do the steps again
Click to expand...
Click to collapse
just tried:
-install official 4.4.2 XXUFND3, reroot, get TWRP and flash....nothing
-install official 4.3 .........MK9, reroot, get twrp(switched also to philz) and flash...nothing
it always brings me back in recovery...
EDIT: just for security i've just flashed the last omni rom and it boots up, so i think its a rom's problem, any suggestion?
As it is mentioned on their site that TWRP 2.8.1.1 supports install from external SD card but on my Xiaomi Redmi 1s I am unable to do that. external memory card is not read in Recovery mode.
At first u need to root your device then push CWM recovery to it coz stock recovery gives md5 error if tried to flash TWRP. After booting to CWM, select TWRP file from recovery and flash it.
Sent from my XT1033 using XDA Free mobile app
Guys! I screwed up bad! An amateur mistake! After thinking about trying a rom, I factory resetted my device along with the internal storage where I stored my zip file and my backups.....now I have a SMT320 with no OS. Help?? Anything will do! I don't dare booting up my device as it will go in a bootloop or may even hard-brick.....I need some serious help here!
try using hotkeys (home+vol up + power,I think) to boot straight into recovery when the device is off.
Yeah, I can do that but my files aren't showing up.....all I did in the recovery was factory reset,wipe data, system and cache and then when I tried to install the rom, it didn't show up. I think It is because I formatted my ad card before for the device and pretty sure the rom is in that.....pls help
c19932 said:
try using hotkeys (home+vol up + power,I think) to boot straight into recovery when the device is off.
Click to expand...
Click to collapse
But my files are missing, read my last post
Connect it to a computer when in TWRP recovery. The internal memory should show up so you can transfer the zip file over.
dont worry. if you have twrp you can install install any custom rom.
download custom rom+gapps via opengapps. com to copy to your sd card.
put it in your sd slot in tab pro, boot in twrp, tick install, tick sd card storage, then install rom and gapps. done.
or you can flash official rom via odin. how to do it check forum or mail me to pm and i will help you step by step